Search

ABSTRACT In the paper, the impact of paper production waste (primary sludge, or PS) on the properties of cement pastes and mortars is discussed upon. Some specimens were formed with [...]

ABSTRACT This paper reports the results of an exploratory experimental study to manufacture eco-friendly lightweight bricks through binary mix of paper mill sludge (PMS) and soil. The pre-manufacture activities include [...]

ABSTRACT The paper analyses the effect of waste sludge from paper industry (paper sludge) on physical and mechanical properties of clay bricks, their microstructure and resistance to freezing and thawing. [...]

ABSTRACT The purpose of this study is to investigate influence of calcination and cooling conditions on pozzolanic reactivity of waste paper sludge. Calcined paper sludge (CPS) is prepared by different [...]

ABSTRACT A sandwich structure consisting of perlite composite foam as core and Brown paper as skin is developed and its flexural behaviour is studied in relation with properties of constituents [...]

ABSTRACT Green liquor dregs wastes coming from pulp and paper production are currently disposed in landfills at a huge cost for industry and the environment. In this work, a novel [...]

ABSTRACT A raw decorative paper was coated with a mixture of Ti[O.sub.2]-Si[O.sub.2] nanocomposite aerogel and melamine-formaldehyde resin to achieve dual functions, namely formaldehyde degradation and smoke suppression. The physical and [...]

ABSTRACT The aim of this study was to evaluate some physical and mechanical properties of the paper mill (PMS) and spruce planer shaving added cement boards. Also the effect of [...]

ABSTRACT Due to increasing generation of solid wastes from papermaking industry, major concerns arise about the disposal of the solid wastes and their adverse impacts on environments, in which the [...]

ABSTRACT In the present work, unshredded waste newspaper based composites have been prepared in polyester resin matrix. Reinforcing material, waste newspaper is characterized by chemically, X-ray diffraction (XRD) methods, Fourier [...]

ABSTRACT Sustainable recyclable paper and composite materials can be ideal choices for the construction of temporary structures for both exhibition spaces or for rapid-recovery shelters in emergency operations. The unique [...]

ABSTRACT This review compiles the main scientific and technical findings on the viability of using paper sludge waste as a supplementary cementitious material in the manufacture of future eco-efficient cements. [...]

ABSTRACT The use of paper-mill residuals in concrete formulations provides an alternative to landfill disposal. A response surface statistical methodology was carried out to model the influence on the slump [...]

Abstract The use of paper de-inking sludge in pozzolanic material manufacture permits a disposable residue to be included in the cycle of the materials. A study on the reuse of [...]

ABSTRACT Investigation of formaldehyde and VOCs emissions from wood-based panels are of great importance because of their negative impact on human health. In this study, a novel low formaldehyde and [...]

ABSTRACT Cotton waste results from the mechanical processing of raw cotton in yarn mills. Recycle Paper Mills constitute 30% of total pulp and paper mill segment in India. With 85% [...]

ABSTRACT The use of paper-mill residuals in concrete formulations was investigated as an alternative to landfill disposal. The mechanical and durability properties of concrete containing paper-mill residuals collected from a [...]

ABSTRACT Recycle paper mills (RPM) contribute 30% of total pulp and paper mill segment in India. With 85% average efficiency of RPM, 5% waste (RPMW) is produced annually. RPMW which [...]

ABSTRACT This study was to develop a new building material, Wood-Crete, using sawdust, waste paper and Tradical lime. The paper presents the processing technologies, factors which affect the performance of [...]

ABSTRACT The texture of the C-S-H gels formed in ternary cement blends containing thermally activated paper sludge (APS), fly ash (FA) from coal combustion and Ordinary Portland Cement (OPC) was [...]

ABSTRACT Cellulose products made from recycled paper can be utilized as sound absorbing and insulation materials. Cellulose is a sound absorbing material composed of paper, and is thus environmentally friendly [...]

ABSTRACT The objective of this research was to develop lightweight cement mortars with good thermal-insulation properties by incorporating expanded polystyrene (EPS) and paper sludge ash (PSA), both of which are [...]

ABSTRACT This work deals with the frost resistance of blended cements containing calcined paper sludge (source for metakaolin) as partial Portland cement replacements. Freeze-thaw tests were performed on blended cement [...]

ABSTRACT This paper presents an exhaustive study about the identification and evolution of the mineralogical hydrated phases of ternary Portland cements (TPC), containing thermally activated clay waste (paper sludge) and [...]

ABSTRACT This research work deals with durability aspects of ternary cements containing 79 wt.% ordinary Portland cement (CEM I), 10.5 wt.% coal fly ash and 10.5 wt.% thermally activated paper [...]

ABSTRACT This paper presents for the first time the influence of mixing different thermally activated paper sludges (APS) and fly ash (FA) on the pozzolanic reaction kinetics in APS-FA-Ca[(OH).sub.2] systems [...]

ABSTRACT This paper presents results of an investigation into the potential use of recycling paper mill waste-water to replace mixing water in cement mortar systems for manufacturing concrete masonry products. [...]

ABSTRACT Making use of industrial by-product or waste clay to partially replace cement in concrete has greatly contributed to sustainable development of environment. This study investigated the optimal activation condition [...]

Abstract Two modifications have been proposed for the Nurse-Saul maturity function to get better estimates of compressive strength of concrete cured at different temperatures in this paper. The modifications account [...]

This discussion clarifies certain issues related to references made by the authors to the paper entitled "RC columns of square section--passive and active confinement with composite ropes" by T.C. Rousakis, [...]

1. Introduction As the starting point of this discussion, we would like to congratulate the authors for this interesting review [1], which defends the use of earth as a building [...]

ABSTRACT A discussion is presented on the effect of porosity change on the thermal expansion coefficient of porous materials. It is shown that both drained and undrained thermal expansion coefficients [...]

ABSTRACT This study presented experimental results of mechanical properties of RAC containing mineral admixtures at 500[degrees]C. Four different mineral admixtures (fly ash (FA), waste paper sludge ash (PSA), silica fume [...]

This special issue contains six research papers selected from presentations made to the International Conference on Structural Faults and Repairs held in London in 2003. The selected papers were peer [...]

ABSTRACT The University of Minnesota Duluth Natural Resources Research Institute (NRRI) and the Wisconsin Business Innovation Corporation (WBIC) conducted a preliminary study to determine the feasibility of producing composite building [...]

ABSTRACT The properties of wood-crete were investigated based on the modification of sawdust by hot water boiling, alkaline treatment and the addition of different types of waste paper. The results [...]

ABSTRACT The objective of the research reported in this paper was to investigate the use of short arc-length segments and semi-circular segments of paperboard (also known as cardboard) tubes as [...]

ABSTRACT This paper presents an experimental study of the effect of adding leather wastes, namely chrome shavings (CS) and buffing dust (BD), on mechanical and thermal properties of cement and [...]

ABSTRACT The aim of this study was to investigate the behaviour of a new type of lightweight concrete which would be suitable for use as a load-bearing concrete masonry unit. [...]

ABSTRACT Potential use of high calcium wood ash (HCWA) as partial cement replacement material in production of mortar was investigated. Chemical composition and phases of HCWA were evaluated using X-ray [...]

ABSTRACT In this work, we will expose the behaviour of a composite structure reinforced with marble powder. The attention was focused on the effects produced on the physical and mechanical [...]

Abstract In the study the use of marble dust collected during the shaping process of marble blocks has been investigated in the asphalt mixtures as filler material. The samples having [...]

ABSTRACT Sticky rice-lime mortar is one of the most important technological inventions in the Chinese architectural history. In this work, an experimental study on the application of sticky rice-lime mortar [...]

Fifteen of the best and most interesting international papers from "Railway Engineering-2013" have been complied into this Special Issue. The "Railway Engineering" Conference series is one of the world's most [...]

Abstract In this study, particleboard surfaces were coated with lacquered paint, melamine impregnated papers, wood veneers and continuous press laminates. Effects of surface coating material type, melamine paperweight, wood veneer [...]

ABSTRACT This paper studied the unsaturated shear strength properties of a soil with the gradation characteristics of the material typically used in adobe construction. The main goal was to predict [...]

The authors truly appreciate the discusser for his insightful and valuable comments on our paper. In Section 2.5 of the discussed paper, the authors described the discusser's work on the [...]

On June 22-24, 2015, the First International Conference on Bio-based Building Materials was held in Clermont-Ferrand, France (1CBBM2015). In the conference, over 140 technical papers were presented by researchers and [...]

The corresponding author regrets to inform that the aforementioned article was submitted to the journal in error without the prior consent or agreement of the co-author Dr. Mazen M. Khaled. [...]