Search

The global reality of the COVID-19/Corona pandemic paradoxically boosted national politics, broadcasting and citizenship. Media coverage, especially initially, praised citizen solidarity and the creative solutions that were pioneered to care for each other. A year later, a lasting social learning curve throughout and after this crisis seems illusory. The pandemic, this paper argues, needs to be understood in a longer timeframe as the working through and coming to terms with neo-liberal governmentality. The (often hilarious) early responses on social media provide a strong entry to do so. Our focus will be on the Netherlands which had a so-called ‘intelligent’ lockdown during the first wave of COVID-19 in the spring of 2020. Using the authors’ own sharing back and forth of toilet paper memes as a starting point, we aim to explore the notion of collective self-reflection and citizen co-education underlying both heated and simply ridiculous posts. Using previous discussion of cultural citizenship, this paper inquires into how pandemic citizenship played out as a vast exercise in disciplining and distinction through jokes and anger. The material suggests a nostalgic turn that might point to an implicitly voiced critique of neoliberal governmentality.

Ning Gao,1,* Meng Li,2,* Weiming Wang,1 Lei Wang,3 Zhen Liu,4 Yufeng Guo1 1Department of Acupuncture and Moxibustion, Guang’anmen Hospital, China Academy of Chinese Medical Sciences, Beijing, 100053, People’s Republic of China; 2Department of Gastroenterology, Guang’anmen Hospital, China Academy of Chinese Medical Sciences, Beijing, 100053, People’s Republic of China; 3Department of Dermatology, China-Japan Friendship Hospital, Beijing, 100020, People’s Republic of China; 4Department of Gastroenterology, Xiyuan Hospital, China Academy of Chinese Medical Sciences, Beijing, 100091, People’s Republic of China*These authors contributed equally to this workCorrespondence: Zhen Liu, Department of Gastroenterology, Xiyuan Hospital, China Academy of Chinese Medical Sciences, No. 1 Xiyuan Playground, Haidian District, Beijing, People’s Republic of China, Email doctorliuzhen@126.com Yufeng Guo, Department of Acupuncture and Moxibustion, Guang’ an Men Hospital, China Academy of Chinese Medical Sciences, No. 5 Beixiange St., Xicheng District, Beijing, People’s Republic of China, Email gamgyf@139.comBackground: In recent years, the incidence of herpes zoster has risen steeply, the exact pathogenesis of the acute pain and the transformation into postherpetic neuralgia are still obscure, and the absence of effective management remains a major therapeutic challenge. The purpose of this study was to perform a qualitative and quantitative bibliometric analysis of the 100 most cited papers on herpes zoster.Materials and methods: Related literature were retrieved from the Web of Science Core Collection. Excel and VOSviewer software were applied to quantitatively analyze, and construct the bibliometric network charts.Results: The Top 100 most-cited papers published between 2000 and 2018 showed a fluctuating downward trend. The most studies were published in the year of 2000 (n = 12). The article entitled “A vaccine to prevent herpes zoster and postherpetic neuralgia in older adults” from Oxman MN, was the most-cited publication. The United States was the most contributing country, followed by the United Kingdom, and Italy. Finland occupied the highest citations per publication (CPP). The University of Colorado topped the list of institutions with the most publications with 18 articles and also had the most citations (average citations: 281.78 per article). Myron J Levin from the University of Colorado School of Medicine is the most published and most cited researcher overall, whereas Duke University’s John W Gnann tops the list in terms of average CPP.Conclusion: In terms of the quantity of T100 articles, researchers, and organizations, the US is the predominant country. The most T100 papers were published in the special journal Clinical Infectious Diseases. The most academic focus remain the remedies for postherpetic neuralgia and vaccine development for individualized groups.Keywords: herpes zoster, bibliometric study, top-cited, citation, VOSviewer

In an earlier publication (Van Wee & Banister, 2016), we explained that literature review papers (LRP) should explicitly report on the search and selection process of documents included. In this paper, we present two approaches for reporting the methodology for doing this: a basic approach and a reasoned approach. The basic approach includes reporting databases(s), keywords, search strings, snowballing, the selection of documents, presenting an overview of documents included and reporting additional selection criteria (if applicable). The reasoned approach adds to the basic approach (what was done) by explicitly explaining the motivation for choices and showing the selection process graphically (why it was done). The two approaches should be seen as options, and not the only alternatives. We recommend that authors of LRPs depart from these approaches and modify them where appropriate. The important lesson is that authors should be explicit about the approach adopted, as this enables the reader to understand the thinking behind the LRP and the conclusions drawn.

Chloropropanols such as 3-monochloropropane-1,2-diol (3-MCPD) and 1,3-dichloro-2-propanol (1,3-DCP) have drawn increasing attention due to their release from food contact paper and their potential carcinogenic effects. In this study, the effects were investigated of water extraction conditions on release of chloropropanols from food contact paper, and the extraction efficiencies of chloropropanols by water extract and migration method were compared. Cold water was found to be more severe than hot water for extraction of chloropropanols, with the highest water extraction value obtained at 23°C. Two hours of extraction was sufficient as the chloropropanols can be fully extracted from food contact paper within a short period of time. Increase of temperature in the range of 10°C-60°C had little impact on release of chloropropanols, however, the extraction of chloropropanols decreased when high temperatures (80°C or above) were applied due to volatilisation losses. Hence, attention should be paid when choosing extract conditions representing the worst-case scenario. The water extraction value using EN 645 method gives higher results compared to migration test described in GB 31604.1 and GB 5009.156, suggesting that the water extract method was probably more severe. For migration test, aqueous-based simulants were found to be more conservative than oil-based simulants, suggesting the conventional experiment conditions applicable for compliance test of chloropropanols migration can be simplified and optimised.

The present study investigated the phycoremediation efficacy of two freshwater green microalgae Chlorella ellipsoidea and Desmodesmus opoliensis for treatment of water of Ellenga beel, a wetland lo...

For the first time, molecular dynamics simulation was used to analyse the solubility of five kinds of nanoparticles (SiO2, ZnO, Al2O3, Fe2O3, TiO2), cellulose crystalline region and cellulose molec...

In order to obtain a lignin-based adsorbent with low cost, simple operation and no further modification, a calcium lignin adsorbent was prepared from chemical mechanical pulping (CMP) waste liquor by directly calcification from lime. The calcium lignin was characterized by BET, SEM, TEM, FT-IR and solid-state NMR analyses. The results showed that the molecular structure of the calcium lignin particles did not change when compared to sodium lignin, the formation mechanism of calcium lignin was revealed. The initial COD and lignin contents of CMP waste liquid were 54858 mg/L and 24.39 g/L, the conversion rate of lignin can reach 71.36% when was deal with lime. Thus, most of the lignin resources in the waste liquid were recovered. The middle-stage wastewater (MSWW) of pulping and papermaking was dealt with calcium lignin, the COD removal rate was up to 85.83%. The adsorption isotherms and kinetics were well fitted by the Langmuir model and pseudo-second-order kinetic model, respectively. Lime was regenerated from the used calcium lignin with high-temperature calcination, the conversion rate of calcium ions can reach 83.56%. Overall, the calcium lignin prepared by the one-step method exhibited great potential for effectively removing COD from middle-stage wastewater.

Gas chromatography – tandem mass spectrometry (GC-MS/MS) using formic acid as a protective agent is reported for the determination of acrylic resin monomers in food contact packaging paper. The analytes were extracted by ethanol mixed with formic acid with 2-phenylethyl propionate as the internal standard. The extract was separated by a 6% cyanopropylbenzene-94% dimethylsiloxane ultra-inert chromatographic column and analyzed by GC-MS/MS in multiple reaction monitoring (MRM) mode. 13 acrylic resin monomers including acrylic acid, styrene, and acrylic ester were separated. The procedure was successfully applied for the analysis of real samples. The procedure provided a linear calibration range with detection limits from 0.16 to 0.46 mg kg−1. The mean recoveries were from 88.1% to 100.9% with relative standard deviations less than 5.4%. The residual acrylic resin monomers in packaging paper were primarily from printing base paper and varnish. Of the acrylic resin monomers, the monomers except for butyl acrylate and 2-ethylhexyl acrylate showed low migration rates. The method provides high sensitivity and good reproducibility with simple pretreatment, demonstrating application for monitoring acrylic resin monomers in food contact packaging paper.

Time-limited exposure of electrode-free optically rewritable electronic paper is essential for applications, but performance characteristics can be modest. In this study we investigate whether imag...

Osteoporosis and associated fractures present a major challenge in improving global health outcomes. Key clinical aspects are the definition of osteoporosis and associated fractures, fracture risk prediction, stratification of risk of fracture, intervention thresholds and the most appropriate intervention based on integration of aforementioned. Correct understanding and application of these concepts are essential to stem the increasing tide of fragility fractures associated with an aging population. The role of muscle strength and function, sarcopenia, and the newly emerging concept of osteosarcopenia in maintaining bone health are discussed in detail.

OCCUPATIONAL APPLICATIONSErgonomic risk assessment is a key step in managing work-related musculoskeletal disorders. Diverse assessment methods exist, and errors may occur if inappropriate methods are selected. Understanding the level of knowledge, how to use methods, and exploring factors affecting erroneous usage of these methods, can provide useful information for health and safety regulatory authorities and decision-makers to identify problems and determine an action plan to eliminate them. We found that Iranian occupational health specialists have little knowledge about the types of pen-and-paper observational methods (OMs), and most of them use a limited number of these methods. Content analysis of interviews identified three main categories of influential factors and 12 subcategories. The main categories were educational, individual, and organizational factors. These results suggest the need for more effort to ensure that practitioners possess better knowledge and skills in the selection and application of pen-and-paper OMs.Background Ergonomic risk assessment is a key step in managing ergonomics in the workplace. Errors in selecting risk assessment methods may occur during risk assessment and could invalidate the reliability of the results obtained.Purpose The aims of the present study were to investigate Iranian occupational health specialists’ knowledge and application of pen-and-paper observational methods (OMs) for ergonomics assessment and to determine their influential factors.Methods We used a mixed-method design in two phases, combining quantitative and qualitative approaches. Quantitative data were collected from 237 occupational health specialists who were included in the study through purposive sampling of experts. In the qualitative phase, in-depth semi-structured interviews were conducted with participants from the first phase, and the factors associated with the selection and application of the pen-and-paper OMs were examined over a 6-month period.Results Participants were familiar with 13 out of 34 methods studied, and they had performed risk assessments with only nine of them. The most frequently used methods were RULA (95.4%), REBA (84.8%), QEC (65.4%), and ROSA (54.9%). Content analysis of interviews identified three main categories of influential factors and 12 subcategories. The main categories included educational, individual, and organizational factors.Conclusion Iranian occupational health specialists were found to have relatively limited knowledge about pen-and-paper OMs, and most of them use a limited number of these methods. These results suggest the need for more effort to ensure that practitioners possess better knowledge and skills in the selection and application of these methods. Creating stricter regulations regarding the qualifications of practitioners, modifying academic curriculum content, continuously monitoring the performance of practitioners, and holding retraining workshops in a purposeful manner could help minimize errors in selecting and applying pen-and-paper OMs.