Search

Induction implant welding (IIW) of thermoplastic composites (TPC) is a new technology which uses the heat from the electromagnetic induction heating element implanted in the lap region of TPC laminate under the action of high-frequency alternating magnetic field to melt the thermoplastic resin in the interface area to achieve the connection of TPC structure. The technology has the advantages of simple operation, green efficiency, non-contact, etc., and has received extensive attention from the industrial sector in the past 30 years. Focusing on the IIW process of TPC, the influence of heat generation mechanism, heating effect, welding process parameters on the performance of welding joints was systematically introduced in this paper. Among them, the causes of uneven temperature in the welding area were explained, the method of regulating the temperature distribution in the welding area was presented, and the relationship between the uniformity of the temperature field and the quality of the welded joint was revealed. Finally, some problems faced by the APC structure IIW technology and its future development directions were also discussed.

In order to meet the high requirements of future high-speed and high acceleration tactical missiles for shell bearing capacity and heat protection function, the integrated structure-heat protection ϕ480 mm composite shell was prepared by dry winding process, in which the structure layer adopted T700 carbon fiber/cyanate ester composite, and the heat protection layer adopted composite heat protection structure. The internal pressure, acoustic emission and hydraulic burst tests had been done for integrated structure-heat protection ϕ480 mm shell. The strain variation law, the damage type and damage location of ϕ480 mm composite shell were researched. The structural integrity of external heat protection materials was evaluated. The capacity of bearing internal pressure load was also assessed for the integrated structure-heat protection ϕ480 mm composite shell. The results show that the strain of ϕ480 mm composite shell is linear with the pressure and increased with the raising pressure. The acoustic emission signals, such as resin cracking, monofilament fracture, fiber bundle fracture and delamination are distributed in the dome areas under the internal pressure. The Felicity ratio of ϕ480 mm composite shell is 0.96 after secondary loading. The bursting pressure of ϕ480 mm composite shell is 18.6 MPa, and the vessel characteristic coefficient reaches 42.1 km. The fiber fracture occurs in the dome areas. A small amount of fiber fuzzing, broken wire and whitening appear on the surface of the heat resistant layer material, and no delamination and shedding occur, maintaining good structural integrity.