Search

Abstract An equivalent analytical model of sloshing in a two-dimensional (2-D) rigid rectangular container equipped with multiple vertical baffles is presented. Firstly, according to the subdomain partition approach, the total liquid domain is partitioned into subdomains with the pure interface and boundary conditions. The separation of variables is utilized to achieve the velocity potential for subdomains. Then, sloshing characteristics are solved according to continuity and free surface conditions. According to the mode orthogonality of sloshing, the governing motion equation for sloshing under horizontal excitation is given by introducing generalized time coordinates. Besides, by producing the same hydrodynamic shear and overturning moment as those from the original container-liquid-baffle system, a mass-spring analytical model of the continuous liquid sloshing is established. The equivalent masses and corresponding locations are presented in the model. The feasibility of the present approach is verified by conducting comparative investigations. Finally, by utilizing normalized equivalent model parameters, the sloshing behaviors of the baffled container are investigated regarding baffle positions and heights as well as the liquid height, respectively.

The dynamic behavior of liquid storage tanks is one of the research issues about fluid–structure interaction problems. The analysis errors of the dynamics of multiple adjacent tanks can exist if neglecting soil–tank interaction since tanks are typically supported on flexible soil. In the present paper, the dynamics of a group of baffled cylindrical storage tanks supported on a circular surface foundation and undergoing horizontal excitation are analytically examined. For upper multiple tank–liquid–baffle subsystems, accurate solutions to the velocity potential for liquid sloshing are acquired according to the subdomain partition technique. A theoretical model is utilized to portray the continuous sloshing of each tank. For the soil–foundation subsystem, a lumped-parameter model is used to characterize the impacts of soil on upper-tank structures using Chebyshev complex polynomials that present the fitting results of horizontal, rocking, and coupling impedance functions. Then, a model of the soil–foundation–tank–liquid–baffle system is constructed on the basis of the substructure approach. The present sloshing frequencies, sloshing height, and hydrodynamic shear as well as the moment under rigid/soft soil foundations are compared to the available exact results and the numerical results to prove the validity of the present model. The error of the maximum sloshing height between the present and the numerical solutions is within 5.27%; the solution efficiency of system dynamics from the present model is 40–50 times faster than that from the ADINA model. A detailed parameter analysis of the dynamic characteristics and earthquake responses of the coupling system is presented. The research novelty is that an equivalent analytical model is presented, and it allows for investigating the dynamics of soil-supported multiple cylindrical tanks with a baffle, providing acceptable accuracy and high calculation efficiency.

In order to reveal the mechanism of acid-heat coupling in improving the permeability of coal seams, combined with the advantages of the low-temperature nitrogen adsorption method and mercury intrusion method under different pore size tests, X-ray diffraction(XRD) phase analysis was used as an auxiliary method to analyze the microscopic and multi-dimensional angle analysis of coal pore structure. The research results show that the coupling conditions of acid and heat have a significant effect on the pore structure of the coal body, and it shows a trend of first strengthening and then weakening with the increase of temperature. At 50 ℃, the 5% HF+5% HCl mixed acid solution has the most significant effect on pore reformation. Specifically, in the micro-pore stage(measured by the low-temperature nitrogen adsorption method), the pore volume increased by 22.3%, the specific surface area increased by 23.9%, and the average pore size increased by 57.1%. The pore volume increased by 110.2% in the visible crack stage(measured by the mercury intrusion method).

The enhancement of the physical and mechanical properties and the anti-mildew performance of wood–plastic composites are of great significance for broadening their application field. In this research, bamboo fibers underwent treatments with safe, environmentally friendly bio-enzymes. Subsequently, a bamboo–plastic composite (BPC) was developed using the modified bamboo fibers and polyethylene. The effects of biological enzymatic treatments on the surface free energy, the chemical composition of the bamboo fibers, water resistance, thermal stability, bending performance, impact performance, and anti-mildew performance of the BPC samples were analyzed. This study revealed that treating bamboo powder with bio-enzymes (xylanase, lipase, laccase, pectinase, hemicellulase, or amylase) decreased the surface free energy and the polar components of the bamboo fibers while improving the surface O/C atomic ratio of the bamboo fibers. These enzyme treatments enhanced the water resistance, bending performance, and anti-mildew performance of the BPC samples. However, on the whole, the thermal stability of the composites decreased. Particularly, after hemicellulase treatment, the composites had the lowest water absorption, reflecting a decrease of 68.25% compared to the control group. With xylanase modification, the 24 h water absorption thickness swelling rate of the composites was the lowest, reflecting a decrease of 71.27% compared to the control group. After pectinase modification, the static bending strength and elastic modulus of the prepared composites were the highest, with an increase of 15.45% and 13.31%, respectively, compared to the unmodified group. After xylanase modification, the composites exhibited the best anti-mildew effect, with an anti-mold effectiveness of 74.67%. In conclusion, bio-enzyme treatments can enhance the physical and mechanical properties and anti-mildew performance of BPCs. This research provides a theoretical foundation for the preparation of high-performance wood–plastic composites.

Objective: Lung cancer is a malignant tumor with the highest mortality rate in the world. It is necessary to develop effective biomarkers for diagnosis or prognostic treatment to improve the survival rate of patients. In this prospective study, we identified a membrane-expressed protein Tight Junction Protein 1 (TJP1), which is an ideal therapeutic target for lung cancer, and demonstrated its role in invasion, migration, and proliferation of lung cancer. Methods: High-throughput monoclonal antibody microarrays were used to screen for differential expression of monoclonal antibodies (mAbs) in lung cancer and normal lung tissue. Differentially expressed antibodies were used to immunoprecipitate their cellular targets to be identified by mass spectrometry. The identified target TJP1 was knocked down to observe the effect of reduced gene expression on lung cancer cell function. Immunohistochemistry on human tumor tissues and The Cancer Genome Atlas (TCGA) database was used to explore the relationship between TJP1 expression in multiple cancer types and patient prognosis. Results: The antibody CL007473 was overexpressed in tumor tissue and its target protein was identified by mass spectrometry and immunofluorescence as TJP1, a membrane-expressed protein. Knockdown of TJP1 in lung cancer cell lines showed that reduced expression of TJP1 could inhibit the invasion and migration of lung cancer cells and inhibit the proliferation of cancer cells, suggesting that membrane-expressed protein TJP1 may be used as a therapeutic target for lung cancer. TCGA database analysis showed that TJP1 was highly expressed in pancreatic cancer (PAAD) tissues compared with normal tissues, and low expression was more beneficial to the prognosis and survival of PAAD patients. Conclusion: Membrane-expressed protein TJP1 may be a good therapeutic and prognostic target for lung cancer and has the potential to be a prognostic biomarker in pancreatic cancer.

Abstract Background Currently, up-regulated proteins and apoptosis in hepatitis C is a hot topic in exploring the pathogenic mechanism of Heptitis C Virus(HCV). Some recent studies shows that prohibitin is overexpressed in cells expressing HCV core proteins, and up-regulated prohibitin is also found in human hepatoma cell line HCC-M, lung cancer, prostate cancer, and other cancers. Prohibitin is an important member of the membrane protein superfamily, and it plays a role of molecular chaperones in mitochondrial protein stability. Meanwhile, it has a permissive action on tumor growth or acts as an oncosuppressor. Based on our previously established the in vitro HCV cell-culture system (HCVcc), here we aimed to investigate the different expression profiles of prohibitin in Huh-7-HCV and Huh-7.5-HCV cells Methods The total cellular RNA of Huh-7, Huh-7.5, Huh-7-HCV and Huh-7.5-HCV cells were extracted, and then the first-strand cDNA was reversely transcribed. The expression of prohibitin at the mRNA level was assessed by real-time PCR with GAPDH as the control. Furthermore, the expression of prohibitin at the protein level was evaluated by western blot with GAPDH as an internal control. Results Our results of real-time PCR showed that the mRNA expression level of prohibitin in Huh-7-HCV cells was 2.09 times higher than that in Huh-7 cells, while, the mRNA level of prohibitin in Huh-7.5-HCV cells was 2.25 times higher than that in Huh-7.5 cells. The results of western blot showed that the protein expression level of prohibitin in Huh-7-HCV cells was 2.38 times higher than that in Huh-7 cells, while the protein expression of prohibitin in Huh-7.5-HCV cells was 2.29 times higher than that in Huh-7.5 cells. Conclusions The expression of prohibitin was relatively high in Huh-7-HCV and Huh-7.5-HCV cells harboring in vitro transcribed full-length HCV RNA.