Search

Carbon aerogels synthesized via the polymerization of resorcinol (R) and formaldehyde (F) exhibit remarkable physiochemical properties, such as high thermal stability and excellent electrical conductivity. However, their limited specific surface area and porosity restrict their application potential. Herein, we developed hierarchical porous carbon aerogels using a one-step carbonization and activation method, directly converting the resin into carbon aerogel material by adding KOH as an activating agent. In contrast to conventional carbon aerogels with an irregular block ground structure, our hierarchical porous carbon aerogels exhibit substantially enhanced specific surface area, total pore volume, and surface oxygen content. In addition, this straightforward one-step fabrication approach holds significant promise for energy storage applications. Notably, the hierarchical porous carbon aerogel C1, with a KOH/RF mass ratio of 1, was proven to be the most effective electrode candidates, achieving a specific capacitance of 261.9 F·g−1 at 1 A·g−1 and 208.2 F·g−1 at 20 A·g−1. Moreover, it exhibited an outstanding rate capability of 79.5% and excellent capacity retention of approximately 97.5% after 10,000 cycles (7 A·g−1). This work highlights a promising approach for synthesizing commercial-grade carbon aerogels with hierarchical porosity, enabling high-performance energy storage applications.

Despite significant advancements in medical technology, cancer remains the world's second‐leading cause of death, largely attributed to late‐stage diagnoses. While traditional cancer detection methodologies offer foundational insights, they often lack the specificity, affordability, and sensitivity for early‐stage identification. In this context, the development of biosensors offers a distinct possibility for the precise and rapid identification of cancer biomarkers. Carbon nanomaterials, including graphene, carbon nitride, carbon quantum dots, and other carbon‐based nanostructures, are highly promising for cancer detection. Their simplicity, high sensitivity, and cost‐effectiveness contribute to their potential in this field. This review aims to elucidate the potential of emerging carbon‐nanomaterial‐based biosensors for early cancer diagnosis. The relevance of the various biosensor mechanisms and their performance to the physicochemical properties of carbon nanomaterials is discussed in depth, focusing on demonstrating broad methodologies for creating performance biosensors. Diverse carbon‐nanomaterial‐based detection techniques, such as electrochemical, fluorescence, surface plasmon resonance, electrochemiluminescence, and quartz crystal microbalance, are emphasized for early cancer detection. At last, a summary of existing challenges and future outlook in this promising field is elaborated.

Abstract As it is now established that global warming and climate change are a reality, international investments are pouring in and rightfully so for climate change mitigation. Carbon capture and separation (CCS) is therefore gaining paramount importance as it is considered one of the powerful solutions for global warming. Sorption on porous materials is a promising alternative to traditional carbon dioxide (CO2) capture technologies. Owing to their sustainable availability, economic viability, and important recyclability, natural products‐derived porous carbons have emerged as favorable and competitive materials for CO2 sorption. Furthermore, the fabrication of high‐quality value‐added functional porous carbon‐based materials using renewable precursors and waste materials is an environmentally friendly approach. This review provides crucial insights and analyses to enhance the understanding of the application of porous carbons in CO2 capture. Various methods for the synthesis of porous carbon, their structural characterization, and parameters that influence their sorption properties are discussed. The review also delves into the utilization of molecular dynamics (MD), Monte Carlo (MC), density functional theory (DFT), and machine learning techniques for simulating adsorption and validating experimental results. Lastly, the review provides future outlook and research directions for progressing the use of natural products‐derived porous carbons for CO2 capture.

Highlights Research progress on inorganic perovskites quantum dots is reviewed from three aspects: physical properties, synthesis approaches, and electronic applications. Inorganic perovskite quantum dots have been exploited as either the active layers or the additives in high-performance transistors and memories. Challenges and outlook on future advancement of perovskites quantum dots-based electronics are elaborated.

Abstract Carbon‐based nanomaterials, including graphene, fullerenes, and carbon nanotubes, are attracting significant attention as promising materials for next‐generation energy storage and conversion applications. They possess unique physicochemical properties, such as structural stability and flexibility, high porosity, and tunable physicochemical features, which render them well suited in these hot research fields. Technological advances at atomic and electronic levels are crucial for developing more efficient and durable devices. This comprehensive review provides a state‐of‐the‐art overview of these advanced carbon‐based nanomaterials for various energy storage and conversion applications, focusing on supercapacitors, lithium as well as sodium‐ion batteries, and hydrogen evolution reactions. Particular emphasis is placed on the strategies employed to enhance performance through nonmetallic elemental doping of N, B, S, and P in either individual doping or codoping, as well as structural modifications such as the creation of defect sites, edge functionalization, and inter‐layer distance manipulation, aiming to provide the general guidelines for designing these devices by the above approaches to achieve optimal performance. Furthermore, this review delves into the challenges and future prospects for the advancement of carbon‐based electrodes in energy storage and conversion.

Abstract Solar‐driven photothermal water evaporation is considered an elegant and sustainable technology for freshwater production. The existing systems, however, often suffer from poor stability and biofouling issues, which severely hamper their prospects in practical applications. Conventionally, photothermal materials are deposited on the membrane supports via vacuum‐assisted filtration or dip‐coating methods. Nevertheless, the weak inherent material‐membrane interactions frequently lead to poor durability, and the photothermal material layer can be easily peeled off from the hosting substrates or partially dissolved when immersed in water. In the present article, the discovery of the incorporation of borophene into cellulose nanofibers (CNF), enabling excellent environmental stability with a high light‐to‐heat conversion efficiency of 91.5% and water evaporation rate of 1.45 kg m−2 h−1 under simulated sunlight is reported. It is also demonstrated that borophene papers can be employed as an excellent active photothermal material for eliminating almost 100% of both gram‐positive and gram‐negative bacteria within 20 min under three sun irradiations. The result opens a new direction for the design of borophene‐based papers with unique photothermal properties which can be used for the effective treatment of a wide range of wastewaters.

Perovskite quantum dots film has better mechanical stability and structural integrity compared to bulk thin film. Here, the authors demonstrate higher endurance of quantum dot films and develop hybrid CsPbI3 QD/PCBM device with PCE of 15.1% and 12.3% on rigid and flexible substrates, respectively.

Abstract Structural defects are ubiquitous for polycrystalline perovskite films, compromising device performance and stability. Herein, a universal method is developed to overcome this issue by incorporating halide perovskite quantum dots (QDs) into perovskite polycrystalline films. CsPbBr3 QDs are deposited on four types of halide perovskite films (CsPbBr3, CsPbIBr2, CsPbBrI2, and MAPbI3) and the interactions are triggered by annealing. The ions in the CsPbBr3 QDs are released into the thin films to passivate defects, and concurrently the hydrophobic ligands of QDs self‐assemble on the film surfaces and grain boundaries to reduce the defect density and enhance the film stability. For all QD‐treated films, PL emission intensity and carrier lifetime are significantly improved, and surface morphology and composition uniformity are also optimized. Furthermore, after the QD treatment, light‐induced phase segregation and degradation in mixed‐halide perovskite films are suppressed, and the efficiency of mixed‐halide CsPbIBr2 solar cells is remarkably improved to over 11% from 8.7%. Overall, this work provides a general approach to achieving high‐quality halide perovskite films with suppressed phase segregation, reduced defects, and enhanced stability for optoelectronic applications.

The over-dependence on fossil fuels is one of the critical issues to be addressed for combating greenhouse gas emissions. Hydrogen, one of the promising alternatives to fossil fuels, is renewable, carbon-free, and non-polluting gas. The complete utilisation of hydrogen in every sector ranging from small to large scale could hugely benefit in mitigating climate change. One of the key aspects of the hydrogen sector is its production via cost-effective and safe ways. Electrolysis and photocatalysis are well-known processes for hydrogen production and their efficiency relies on electrocatalysts which are generally noble metals. The usage of noble metals as catalysts makes these processes costly and their scarcity is also a limiting factor. Metal nitrides and their porous counterparts have drawn considerable attention from researchers due to their good promise for hydrogen production. Their properties such as active metal centres, nitrogen functionalities, and porous features such as surface area, pore-volume, and tunable pore size could play an important role in electrochemical and photocatalytic hydrogen production. This review focuses on the recent developments in metal nitrides from their synthesis methods point of view. Much attention is given to the emergence of new synthesis techniques, methods, and processes of synthesizing the metal nitride nanostructures. The applications of electrochemical and photocatalytic hydrogen production are summarised. Overall, this review will provide useful information to researchers working in the field of metal nitrides and their application for hydrogen production.

Abstract The surface chemistry of colloidal quantum dots (CQD) play a crucial role in fabricating highly efficient and stable solar cells. However, as‐synthesized PbS CQDs are significantly off‐stoichiometric and contain inhomogeneously distributed S and Pb atoms at the surface, which results in undercharged Pb atoms, dangling bonds of S atoms and uncapped sites, thus causing surface trap states. Moreover, conventional ligand exchange processes cannot efficiently eliminate these undesired atom configurations and defect sites. Here, potassium triiodide (KI3) additives are combined with conventional PbX2 matrix ligands to simultaneously eliminate the undercharged Pb species and dangling S sites via reacting with molecular I2 generated from the reversible reaction KI3 ⇌ I2 + KI. Meanwhile, high surface coverage shells on PbS CQDs are built via PbX2 and KI ligands. The implementation of KI3 additives remarkably suppresses the surface trap states and enhances the device stability due to the surface chemistry optimization. The resultant solar cells achieve the best power convention efficiency of 12.1% and retain 94% of its initial efficiency under 20 h continuous operation in air, while the control devices with KI additive deliver an efficiency of 11.0% and retains 87% of their initial efficiency under the same conditions.

Abstract Halide perovskite quantum dots (PQDs) are promising materials for diverse applications including displays, light‐emitting diodes, and solar cells due to their intriguing properties such as tunable bandgap, high photoluminescence quantum yield, high absorbance, and narrow emission peaks. Despite the prosperous achievements over the past several years, PQDs face severe challenges in terms of stability under different circumstances. Currently, researchers have overcome part of the stability problem, making PQDs sustainable in water, oxygen, and polar solvents for long‐term use. However, halide PQDs are easily degraded under continuous irradiation, which significantly limits their potential for conventional applications. In this study, an oleic acid/oleylamine (traditional surface ligands)‐free method to fabricate perovskite quantum dot papers (PQDP) is developed by adding cellulose nanocrystals as long‐chain binding ligands that stabilize the PQD structure. As a result, the relative photoluminescence intensity of PQDP remains over ≈90% under continuous ultraviolet (UV, 16 W) irradiation for 2 months, showing negligible photodegradation. This proposed method paves the way for the fabrication of ultrastable PQDs and the future development of related applications.