Search

As a fundamental infrastructure of energy supply for future society, energy Internet (EI) can achieve clean energy generation, conversion, storage and consumption in a more economic and safer way. This paper demonstrates the technology principle of advanced adiabatic compressed air energy storage system (AA-CAES), as well as analysis of the technical characteristics of AA-CAES. Furthermore, we propose an overall architectural scheme of a clean energy router (CER) based on AA-CAES. The storage and mutual conversion mechanism of wind and solar power, heating, and other clean energy were designed to provide a key technological solution for the coordination and comprehensive utilization of various clean energies for the EI. Therefore, the design of the CER scheme and its efficiency were analyzed based on a thermodynamic simulation model of AA-CAES. Meanwhile, we explored the energy conversion mechanism of the CER and improved its overall efficiency. The CER based on AA-CAES proposed in this paper can provide a reference for efficient comprehensive energy utilization (CEU) (93.6%) in regions with abundant wind and solar energy sources.

As an effective approach of implementing power load shifting, fostering the accommodation of renewable energy, such as the wind and solar generation, energy storage technique is playing an important role in the smart grid and energy internet. Compressed air energy storage (CAES) is a promising energy storage technology due to its cleanness, high efficiency, low cost, and long service life. This paper surveys state-of-the-art technologies of CAES, and makes endeavors to demonstrate the fundamental principles, classifications and operation modes of CAES. Critical subsystems of CAES are elaborated exhaustively. The application prospects and further research directions are summarized to promote the popularization of CAES in smart grid and energy internet.

Cogeneration is becoming increasingly popular in building and community energy systems with demands on electricity and heat, which is suitable for residential and industrial use in remote areas. This paper considers a stand-alone cogeneration energy hub. The electrical and thermal energies are produced by a combined heat and power (CHP) unit, photovoltaic panels, and a solar thermal collector. Since solar units generate no electricity and heat during the night, energy storage units which shift demands over time can promote the usage of solar energy and reduce the fuel cost of the CHP unit. This paper proposes a method to retrieve the optimal operation cost as an explicit function in the capacity parameters of electric and thermal energy storage units, reflecting the value of energy storage in the cogeneration energy hub. The capacity parameter set is divided into a collection of polyhedrons; on each polyhedron, the optimal value is an affine function in the capacity parameters. Furthermore, the optimal sizes of system components are discussed. The capacity of the CHP unit is determined from a linear program, ensuring supply adequacy; the capacities of solar generation and energy storage units are calculated based on the cost reduction and the budget. Case studies demonstrate the effectiveness of the proposed method.

The comprehensive utilization technology of combined cooling, heating and power (CCHP) systems is the leading edge of renewable and sustainable energy research. In this paper, we propose a novel CCHP system based on a hybrid trigenerative compressed air energy storage system (HT-CAES), which can meet various forms of energy demand. A comprehensive thermodynamic model of the HT-CAES has been carried out, and a thermodynamic performance analysis with energy and exergy methods has been done. Furthermore, a sensitivity analysis and assessment capacity for CHP is investigated by the critical parameters effected on the performance of the HT-CAES. The results indicate that round-trip efficiency, electricity storage efficiency, and exergy efficiency can reach 73%, 53.6%, and 50.6%, respectively. Therefore, the system proposed in this paper has high efficiency and flexibility to jointly supply multiple energy to meet demands, so it has broad prospects in regions with abundant solar energy resource.

Liquid air energy storage (LAES) is a promising energy storage technology in consuming renewable energy and electricity grid management. In the baseline LAES (B-LAES), the compression heat is only utilized in heating the inlet air of turbines, and a large amount of compression heat is surplus, leading to a low round-trip efficiency (RTE). In this paper, an integrated energy system based on LAES and the Kalina cycle (KC), called KC-LAES, is proposed and analyzed. In the proposed system, the surplus compression heat is utilized to drive a KC system to generate additional electricity in the discharging process. An energetic model is developed to evaluate the performance of the KC and the KC-LAES. In the analysis of the KC subsystem, the calculation results show that the evaporating temperature has less influence on the performance of the KC-LAES system than the B-LAES system, and the optimal working fluid concentration and operating pressure are 85% and 12 MPa, respectively. For the KC-LAES, the calculation results indicate that the introduction of the KC notably improves the compression heat utilization ratio of the LAES, thereby improving the RTE. With a liquefaction pressure value of eight MPa and an expansion pressure value of four MPa, the RTE of the KC-LAES is 57.18%, while that of the B-LAES is 52.16%.

Adiabatic compressed air energy storage (A-CAES) is an effective balancing technique for the integration of renewables and peak-shaving due to the large capacity, high efficiency, and low carbon use. Increasing the inlet air temperature of turbine and reducing the compressor power consumption are essential to improving the efficiency of A-CAES. This paper proposes a novel solar–thermal-assisted A-CAES system (ST-CAES), which features a higher inhale temperature of the turbine to improve the system efficiency. Solar–thermal energy, as an external thermal source, can alleviate the inadequate temperature of the thermal energy storage (TES), which is constrained by the temperature of the exhaust air of the compressor. Energy and exergy analyses were performed to identify ST-CAES performance, and the influence of key parameters on efficiency were studied. Furthermore, exergy efficiency and the destruction ratio of each component of ST-CAES were investigated. The results demonstrate that electricity storage efficiency, round-trip efficiency, and exergy efficiency can reach 70.2%, 61%, and 50%, respectively. Therefore, the proposed system has promising prospects in cities with abundant solar resources owing to its high efficiency and the ability to jointly supply multiple energy needs.