Search

This work proposes a wavelet shrinkage rule under asymmetric LINEX loss function and a mixture of a point mass function at zero and the logistic distribution as prior distribution to the wavelet coefficients in a nonparametric regression model with gaussian error. Underestimation of a significant wavelet coefficient can lead to the bad detection of features of the unknown function, such as peaks, discontinuities, and oscillations. It can also occur under asymmetrically distributed wavelet coefficients. Thus, the proposed rule is suitable when overestimation and underestimation have asymmetric losses. Statistical properties of the rule, such as squared bias, variance, frequentist, and bayesian risks, are obtained. Simulation studies are conducted to evaluate the performance of the rule against standard methods and an application in a real dataset involving infrared spectra is provided.

Nonlinear diffusion has been proved to be an indispensable approach for the removal of noise in image processing. In this paper, we employ nonlinear diffusion for the purpose of denoising audio signals in order to have this approach also recognized as a powerful tool for audio signal processing. We apply nonlinear diffusion to wavelet coefficients obtained from different filters associated with orthogonal and biorthogonal wavelets. We use wavelet decomposition to keep signal components well-localized in time. We compare denoising results using nonlinear diffusion with wavelet shrinkage for different wavelet filters. Our experiments and results show that the denoising is much improved by using the nonlinear diffusion process.

To avoid the problems of relative overlap and low signal-to-noise ratio (SNR) of segmented three-dimensional (3D) multimodal medical images, which limit the effect of medical image diagnosis, a 3D multimodal medical image segmentation algorithm using reinforcement learning and big data analytics is proposed. Bayesian maximum a posteriori estimation method and improved wavelet threshold function are used to design wavelet shrinkage algorithm to remove high-frequency signal component noise in wavelet domain. The low-frequency signal component is processed by bilateral filtering and the inverse wavelet transform is used to denoise the 3D multimodal medical image. An end-to-end DRD U-Net model based on deep reinforcement learning is constructed. The feature extraction capacity of denoised image segmentation is increased by changing the convolution layer in the traditional reinforcement learning model to the residual module and introducing the multiscale context feature extraction module. The 3D multimodal medical image segmentation is done using the reward and punishment mechanism in the deep learning reinforcement algorithm. In order to verify the effectiveness of 3D multimodal medical image segmentation algorithm, the LIDC-IDRI data set, the SCR data set, and the DeepLesion data set are selected as the experimental data set of this article. The results demonstrate that the algorithm's segmentation effect is effective. When the number of iterations is increased to 250, the structural similarity reaches 98%, the SNR is always maintained between 55 and 60 dB, the training loss is modest, relative overlap and accuracy all exceed 95%, and the overall segmentation performance is superior. Readers will understand how deep reinforcement learning and big data analytics test the effectiveness of 3D multimodal medical image segmentation algorithm.

Wavelet thresholding (or shrinkage) attempts to remove the noises existing in the signals while preserving inherent pattern characteristics in the reconstruction of true signals. For data-denoising purpose, we present a new wavelet thresholding procedure which employs the step-down testing idea of identifying active contrasts in unreplicated fractional factorial experiments. The proposed method employs bootstrapping methods to a step-down test for thresholding wavelet coefficients. By introducing the concept of a false discovery error rate in testing wavelet coefficients, we shrink the wavelet coefficients with p-values higher than the error rate. The error rate controls the expected proportion of wrongly accepted coefficients among chosen wavelet coefficients. Bootstrap samples are used to approximate the p-value for computational efficiency. We also present some guidelines for selecting the values of hyper-parameters which affect the performance in the step-down thresholding procedure. Based on some common testing signals and an air-conditioner sounds example, the comparison of our proposed procedure with other thresholding methods in the literature is performed. The analytical results show that the proposed procedure has a potential in data-denoising and data-reduction in a variety of signal reconstruction applications.

The present work aims at developing a new approach towards the analysis of the crack path through the access to the information from the infrared (IR) video imaging of the steady fatigue crack growth. We first test some commonly available infrared image filtering techniques, and then we introduce a new robust algorithm to identify the position of the dynamic crack. The proposed procedure performs the local analysis of the temperature distribution around the fatigue crack tip in the 316L stainless steel. The developed MATLAB framework simplifies the routine processing and permits analyzing multiple experiments reasonably easily. Two filtering procedures - Gaussian and wavelet shrinkage - were implemented and applied successively to denoise the IR images. Both filters produce comparable and good quality results. The new algorithm capable of automatically locating the crack tip position from consecutive filtered IR images is proposed. Remarkably successful results are demonstrated with only small errors caused by materials distortion.

The paper is devoted to the new model for image decomposition, that splits an image $f$ into three components $u+v+\omega$, with $u$ a piecewise-smooth or the ``cartoon'' component, $v$ a texture component and $\omega$ the noise part in variational approach. This decomposition model is in fact incorporates the advantages of two preceding models: the second-order total variation minimization of Rudin-Osher-Fatemi (ROF2), and wavelet shrinkage for oscillatory functions. This decomposition model is presented as an extension of the three components decomposition algorithm of Aujol et al. in \cite{JAC}. It also continues the idea introduced previously by authors in \cite{TPB}, for two components decomposition model. The ROF2 model was first proposed by Bergounioux et al. in \cite{BP}, it is an improved regularization method to overcome the undesirable staircasing effect. The wavelet shrinkage is well combined to separate the oscillating part due to texture from that due to noise. Experimental results validate the proposed algorithm and demonstrate that the image decomposition model presents effective and comparable performance to other state-of-the-art models.

The present work aims at developing a new approach towards the analysis of the crack path through the access to the information from the infrared (IR) video imaging of the steady fatigue crack growth. We first test some commonly available infrared image filtering techniques, and then we introduce a new robust algorithm to identify the position of the dynamic crack. The proposed procedure performs the local analysis of the temperature distribution around the fatigue crack tip in the 316L stainless steel. The developed MATLAB framework simplifies the routine processing and permits analyzing multiple experiments reasonably easily. Two filtering procedures - Gaussian and wavelet shrinkage - were implemented and applied successively to denoise the IR images. Both filters produce comparable and good quality results. The new algorithm capable of automatic locating the crack tip position from consecutive filtered IR images is proposed. Remarkably successful results are demonstrated with only small errors caused by materials distortion.

Partial Discharge (PD) measurements of large generators are extremely affected and hampered by noise, making the denoising of PD signal an inevitable issue. Wavelet shrinkage is the most commonly employed method for PD signal denoising. The appropriate mother wavelet and decomposition level are critically important for the denoising performance. In consideration of the PD signal characteristics of large generators, a novel wavelet shrinkage scheme for PD signal denoising is presented. In the scheme, a scale dependent wavelet selection method is proposed; the core idea is that the optimum wavelet at each scale is selected as the one maximizing the energy ratio of coefficients beside and inside the range formed by the threshold, which correspond to the signal to be reserved and noise to be removed, respectively. In addition, taking into account the influence of mother wavelet at each scale on the decomposition level, an approach for decomposition level determination is put forward based on the energy composition after decomposition at each scale. The application results on the simulated signals with different SNR obtained by combining the various pulses and measured signal on-site show the effectiveness of the proposed scheme. Besides, the denoising results are compared with that of the existing wavelet selection methods and the proposed wavelet selection method shows an obvious advantage.

Time series forecasting is widely used in various areas of human knowledge, especially in the planning and strategic direction of companies. The success of this task depends on the forecasting techniques applied. In this paper, a hybrid approach to project time series is suggested. To validate the methodology, a time series already modeled by other authors was chosen, allowing the comparison of results. The proposed methodology includes the following techniques: wavelet shrinkage, wavelet decomposition at level r, and artificial neural networks (ANN). Firstly, a time series to be forecasted is submitted to the proposed wavelet filtering method, which decomposes it to components of trend and linear residue. Then, both are decomposed via level r wavelet decomposition, generating r + 1 Wavelet Components (WCs) for each one; and then each WC is individually modeled by an ANN. Finally, the predictions for all WCs are linearly combined, producing forecasts to the underlying time series. For evaluating purposes, the time series of Canadian Lynx has been used, and all results achieved by the proposed method were better than others in existing literature.

On the basis of wavelet theory, we propose an outlier-detection algorithm for satellite gravity gradiometry by applying a wavelet-shrinkage-de-noising method to some simulation data with white noise and outliers. The result shows that this novel algorithm has a 97% success rate in outlier identification and that it can be efficiently used for pre-processing real satellite gravity gradiometry data.

Constant false alarm rate (CFAR) algorithms allow RADAR systems to set detection thresholds and isolated the target from noise or clutter to keeping the false alarm rate at certain level. In this paper a technique added to Improved Switching IS-CFAR system is used to reduce the non-homogenous effect and clutter wall, this technique is called wavelet de-noising. The detection performance of Improving IS-CFAR using wavelet de-noising (I2S-CFAR) processor is compared with the IS-CFAR detectors for homogeneous, non-homogenous and clutter wall. By using wavelet de-noising a gain in signal to noise ratio (SNR) about 2.6dB achieved for the same probability of detection.

An interferometric synthetic aperture radar (InSAR) phase denoising algorithm using the local sparsity of wavelet coefficients and nonlocal similarity of grouped blocks was developed. From the Bayesian perspective, the double- l 1 norm regularization model that enforces the local and nonlocal sparsity constraints was used. Taking advantages of coefficients of the nonlocal similarity between group blocks for the wavelet shrinkage, the proposed algorithm effectively filtered the phase noise. Applying the method to simulated and acquired InSAR data, we obtained satisfactory results. In comparison, the algorithm outperformed several widely-used InSAR phase denoising approaches in terms of the number of residues, root-mean-square errors and other edge preservation indexes.

Background subtraction without a separate training phase has become a critical task, because a sufficiently long and clean training sequence is usually unavailable, and people generally thirst for immediate detection results from the first frame of a video. Without a training phase, we propose a background subtraction method based on three-dimensional (3D) discrete wavelet transform (DWT). Static backgrounds with few variations along the time axis are characterized by intensity temporal consistency in the 3D space-time domain and, hence, correspond to low-frequency components in the 3D frequency domain. Enlightened by this, we eliminate low-frequency components that correspond to static backgrounds using the 3D DWT in order to extract moving objects. Owing to the multiscale analysis property of the 3D DWT, the elimination of low-frequency components in sub-bands of the 3D DWT is equivalent to performing a pyramidal 3D filter. This 3D filter brings advantages to our method in reserving the inner parts of detected objects and reducing the ringing around object boundaries. Moreover, we make use of wavelet shrinkage to remove disturbance of intensity temporal consistency and introduce an adaptive threshold based on the entropy of the histogram to obtain optimal detection results. Experimental results show that our method works effectively in situations lacking training opportunities and outperforms several popular techniques.

Digital radiography is a popular diagnostic imaging method. Denoising and enhancement have an important potential in obtaining as much easily interpretable diagnostic information as possible with reasonable absorbed doses of ionising radiation. Due to the increasing usage of high resolution and high precision images with a limited number of human experts, the computational efficiency of the denoising and enhancement becomes important. In this paper, a local adaptive image enhancement and simultaneous denoising algorithm for fulfilling the requirements of digital X-ray image enhancement is introduced. The algorithm is based on modification of the wavelet transform coefficients by a pointwise nonlinear transformation and reconstructing the enhanced image from the modified wavelet transform coefficients. The implementation of algorithm in software is simple, quick, and universal.