Search

African scientific research faces formidable challenges, particularly with limited access to state-of-the-art measurement instruments. The high cost associated with these devices presents a significant barrier for regional research laboratories, impeding their ability to conduct sophisticated experiments and gather precise data. This predicament not only hampers the individual laboratories but also has broader implications for the African scientific community and the advancement of knowledge in developing nations—the financial cost barrier considerably impacts the research quality of these laboratories. Reflection on technical and economical solutions needs to be quickly found to help these countries advance their research. In civil engineering, the thermal conductivity property is the most important measurement for characterizing heat transfer in construction materials. Existing devices (i.e., conductometers) in a laboratory are expensive (approximately EUR 30,000) and unavailable for some African laboratories. This study proposes a new and affordable device to evaluate thermal conductivity in construction materials. The method involves establishing a thermal flux between a heat source (from the Joule effect provided by steel wool where a current is circulating) and a cold source (generated by ice cubes) under steady-state conditions. The development of the cylindrical prototype is based on the comparative flux-meter method outlined in the measuring protocol of the ASTM E1225 standard document. Experiments were conducted on four distinct materials (polystyrene, wood, agglomerated wood, and rigid foam). The results indicate a correct correlation between the experimental values obtained from the newly developed prototype and the reference values found in the literature. For example, concerning the experimental polystyrene study, the detailed case analysis reveals a good correlation, with a deviation of only 4.88%. The percent error found falls within the acceptable range indicated by the standard recommendations of the ASTM E1225 standard, i.e., within 5% acceptable error.

The experimental and theoretical analysis of viscous dissipation and heat generation/absorption management is crucial in engineering, medical, biological, and exploration activities. This study investigates the analytical solution of viscous heating and thermal gyration of magneto-micropolar fluid particles across a resistive medium with internal non-uniform heat generation/absorption. The formulated partial differential equations were appropriately converted into coupled ordinary differential equations employing similarity variables along with the boundary conditions. The simulation of the resultant equations is carried out using the collocating weighted residual scheme, and the result is validated using the shooting technique via the Runge-Kutta method of order four, Adomian decomposition technique, variational iteration scheme, differential transform method, and quasi-linearization technique as the control methods. Tabular and graphical representations are provided to illustrate the flow characteristics. Taking from the results, the existence of a magnetic field retards the gyration of the fluid particle motion. The spin gradient and vortex viscosity terms reveal the reverse occurrence of micro-rotation distribution, and it is seen that the porosity term suppresses the velocity field. Furthermore, it is observed that the parameters that enhance internal heat generation decrease the viscosity of the fluid in the region. Hence, these findings will assist scientists and engineers to effectively manage heat generation/absorption in industries where effective heat transfer activities are crucial to achieving ideal performance and reducing energy waste.

The thermal behavior of the cladding layer and the flow behavior of the molten pool significantly affect the geometry, temperature distribution and microstructure of the cladding track, thus affecting the mechanical properties of the cladding. Based on the interaction between the laser and powders, a calculation method of the cross-sectional area of the cladding track is proposed. The droplet energy method and the moving grid method are first combined to establish the surface growth model of the cladding track, to calculate the geometry of the cladding track. Then, the temperature field and flow field of the cladding track are studied. The driving forces of the molten pool flow including shear viscosity, gravity, buoyancy, surface tension at the gas-liquid boundary and pressure between liquids are considered to carry out the dynamics study of the molten pool. According to the force condition of the infinitesimal in the molten pool, the dynamic rules and boundary rules of the molten pool are established, so as to solve the flow field of the molten pool. In addition, the calculated geometry of the cladding track is compared with the experimental result to verify the accuracy of the model, and the microhardness of the cladding track is measured. The results show that the relative error between the simulation and the experiment is less than 6%, and the microhardness of the cladding layer is significantly improved. This work can provide a method for studying the morphology, temperature field, and flow field of laser cladding.

The Inconel 718 superalloy, a precipitation-hardenable material, is of particular interest for applications involving components operating under extreme conditions due to its excellent mechanical properties, high corrosion resistance at temperatures up to 700 °C, and good workability. At high temperatures, thermal transfer processes are crucial for temperature distribution across the component’s section, structural transformations, and variations in the alloy’s properties. The history of accidental overheating events is critical for the microstructure and properties of the alloy. Studies on thermal transfer in the Inconel 718 alloy available in the literature typically focus on the alloy in its as-delivered state. The experimental research presented in this paper examines the influence of repeated overheating history on the thermal diffusivity of the alloy.

To comprehensively investigate the evolution of the stress field, a three-dimensional thermodynamic model of laser cladding was developed in this paper. By analyzing the physical process and constructing a mathematical model, the temperature transfer and stress distribution were calculated. The simulation examined the evolution and distribution of stress at various scanning speeds, discussing the interplay between the temperature field and the stress field during rapid heating and cooling. Residual stress was measured through X-ray diffraction in experiments, and the crack distribution within the cladding layer was observed. The findings indicated that the stress values calculated from the simulation model aligned well with the experimental results. By combining experimental data, we conducted a qualitative analysis of the distribution of residual stresses and the trends of crack initiation, leading to the proposal of an optimized processing scheme that significantly enhances the quality and reliability of the cladding layer.

Both oxyhydrogen and butanol are renewable alternative fuels. Based on gasoline/butanol compound injection mode, although the introduction of oxyhydrogen can effectually enhance the optimal BDIr (butanol direct injection ratio), it also leads to an increase in NO emission. Therefore, this paper further studies the influence of lean-burn on the combustion and emission of ternary-fuel combined supply engine with oxyhydrogen/butanol/gasoline. In this paper, three variables are set, namely five BDIr (0–80%), five ONPIv (oxyhydrogen negative pressure inhalation volume) (0–16 L/min) and five λ (1.0–1.4). The results show that the larger the λ, the more significant the impact of oxyhydrogen on improving combustion and thermal transfer inside the cylinder. With the increase of ONPIv, CoVIMEP, CA 10–90 and CA 0-10 decrease, IMEP increases. Under all lean-burn conditions, ONPI can reduce CO and HC emissions. Under the condition of λ = 1.4, when ONPIv = 16 L/min, NO emission is 49.98% lower than the value of the original engine. Moreover, based on BDIr = 40%, 16 L/min ONPIv can elevate the λ limit from 1.41 to 1.83. In summary, “1.1 = λ ≤ 1.2+ONPIv = 16 L/min+60%≤BDIr≤80%” is the excellent control strategy of ONPI + BDI + GPI engine. The synergistic influence of lean-burn and larger BDIr can greatly reduce gasoline consumption and NOx emission caused by oxyhydrogen, but also worsen the mixture combustion atmosphere. ONPI can effectively improve this problem, and further increase energy efficiency. The coupling technology of ternary-fuel combined supply and lean-burn has a positive impact on improving thermal transfer efficiency, optimizing mixture combustion and decreasing gaseous emission.

The traditional curing methods for thermosetting resins are energy-inefficient and environmentally unfriendly. Frontal polymerization (FP) is a self-sustaining process relying on the exothermic heat of polymerization. During FP, the external energy input (such as UV light input or heating) is only required at the initial stage to trigger a localized reaction front. FP is regarded as the rapid and energy-efficient manufacturing of polymers. The precise control of FP is essential for several manufacturing technologies, such as 3D printing, depending on the materials and the coupling of thermal transfer and polymerization. In this review, recent progress on the materials, modeling, and application of FP for thermosetting resins are presented. First, the effects of resin formulations and mixed fillers on FP behavior are discussed. Then, the basic mathematical model and reaction-thermal transfer model of FP are introduced. After that, recent developments in FP-based manufacturing applications are introduced in detail. Finally, this review outlines a roadmap for future research in this field.

The main objective of the paper is optimization of the process of thermal transfer in order to obtain - with minimum number of tests and maximum precision - a high adhesion degree of stencils applied to the garments. The major factors affecting the thermal transfer processes are: temperature, pressure, time, and the characteristics of the textile (fiber composition, finishing, structure of the face surface, etc.). The problem is current for most companies that produce clothing for sports and outdoor activities. This category of products is quite complex due to processing technology, combinations of various textile components, cutout components and most importantly the informative and decorative elements applied through thermal transfer process. To optimize the thermal transfer process, a series of experiments with a central rotating compound were applied. Analysis and Interpretation of the results showed that the pressing time is the most important factor of the adhesion of the thermal transfer to the textile material and its ulterior resistance to washing.

The turbulent convective thermal transfer in channel heat exchangers (CHEs) is studied numerically via the CFD (Computational Fluid Dynamics) method. Deflectors are inserted on the hot bottom walls of the heat channel to enhance the hydrothermal characteristics. Various shapes of in-line deflectors are considered, namely: rectangular (a/b = 0.00), cascaded rectangular-triangular (a/b = 0.25, 0.50, and 0.75), and triangular (a/b = 1.00) shapes. From the obtained results, the inclusion of in-line deflectors with a/b = 0.75 has given the most significant thermal enhancement factor, which was higher than that for a/b = 0.00, 0.25, 0.50, and 1.00 by about 5.36, 5.06, 67.27, and 3.88%, respectively. Also, the in-line cascaded deflector’ case (a/b = 0.75) shows an increase in the enhancement factor (η) from 4 to 15.44% over the cases of one deflector (corrugated, rectangular, triangular, trapezoidal, arc, (+), S, 45° V, 45° W, T, Γ, and ε-shaped) or two deflectors (staggered corrugated). This highlights the effectiveness of in-line cascaded rectangular-triangular deflectors with a/b = 0.75 in improving the performance of the proposed exchanger for the conditions adopted.

Wearable electronics are new structures with a wide range of possible applications. This study aims to analyze the effects of hot pressing in thermal transfer of different carbon-based composites as a new application method of screen-printed electronics on textiles. Flexible heaters were screen-printed on polyethylene terephthalate PET foil with composites based on graphene, carbon black, and graphite with different wt.%, measured and then hot pressed to measure and analyze differences. Research showed that the hot pressing process in thermal transfer resulted in decreased electrical resistance, increased power, and higher maximal temperatures. Best results were achieved with composites based on 12 wt.% graphene with sheet resistance lowered by about 40% and increased power by about 110%. This study shows promise for thermal transfer and screen-printing combination as an alternative for creating flexible electronics on textiles.

Computational modeling offers an opportunity for a better understanding and investigation of thermal transfer mechanisms. It can be used for the optimization of the electron beam melting process and for obtaining new materials with improved characteristics that have many applications in the power industry, medicine, instrument engineering, electronics, etc. A time-dependent 3D axis-symmetrical heat model for simulation of thermal transfer in metal ingots solidified in a water-cooled crucible at electron beam melting and refining (EBMR) is developed. The model predicts the change in the temperature field in the casting ingot during the interaction of the beam with the material. A modified Pismen-Rekford numerical scheme to discretize the analytical model is developed. These equation systems, describing the thermal processes and main characteristics of the developed numerical method, are presented. In order to optimize the technological regimes, different criteria for better refinement and obtaining dendrite crystal structures are proposed. Analytical problems of mathematical optimization are formulated, discretized and heuristically solved by cluster methods. Using important for the practice simulation results, suggestions can be made for EBMR technology optimization. The proposed tool is important and useful for studying, control, optimization of EBMR process parameters and improving of the quality of the newly produced materials.

Background and Aim : Along with improvements in aesthetics and longevity of restorations, finishing and polishing, can produce potentially injurious temperature rise within the pulp chamber. The purpose of the current study was to find whether different polishing methods and thickness of composites have any effect on temperature rise of composite restorative materials . Materials and Methods : Sixty composite resin specimens 9 mm in diameter were prepared and assigned to three experimental groups with three sample thicknesses (2, 3 and 4mm). Each group was divided into four subgroups randomly. Polishing in subgroups 1 and 2 (continuous and intermittent dry polishing) and subgroups 3 and 4 (continuous and intermittent wet polishing) was carried out with a slow speed contra-angle hand piece at a medium speed for 120 seconds in a roll on motion. Immediately after polishing, temperature was measured on the top and bottom surface of each sample using a laser thermometer. One and two way ANOVA, Duncan, and paired T-test was used to analyze the data . Results: The mean temperature rise after polishing in different methods was significant continuous dry polishing produced the maximum temperature rise. In addition, increasing the thickness of composite resin up to 4mm did not significantly affect thermal transfer from the top surface to the base during polishing . Conclusion : Copious use of water coolant during finishing and polishing procedures is considered a simple and effective method for pulpal protection. Increasing the thickness of composite resin does not have a significant role in compensating the heat generated during polishing procedure .

This paper seeks to present the technical conditions and the main types of research and experimental verifications being conducted by the Laboratory of Research and Hygrothermal Testing for Materials, Building Elements and Parts at INCD URBAN-INCERC Iasi Branch. Another purpose of this paper is to describe the subjects of the research work done by the group of researchers within the Laboratory over the past 15 years. The main research papers, tests, expert studies, studies on the behavior of in-use buildings may be grouped in the following categories: verification of the quality of new products, products for the hygrothermal conservation and rehabilitation, for materials, elements, closing systems used in constructions and installations; homologation of the new building solutions or hygrothermal rehabilitation existing solutions; identification of the stationary regime specific thermal and physical parameters – resistance to thermal transfer, the condensation risk, the temperature range at the surface of closing elements, the global thermal transfer coefficient; determination of the behavior in case of water vapor diffusion; the accumulation of dew within the structure; determination of the behavior of thermally difficult areas: decks, joining areas, studs, areas with clamps, sashes, lintels etc; experimental determination of the behavior of non-stationary thermal regime closing elements – thermal inertia index, damping and dephasing of the thermal wave, phase displacement; technical agrementation of products, and climatic qualification of industrial equipments, under extreme climatic conditions.

The present study is aimed at predicting downward flame spread characteristics over poly(methyl methacrylate) (PMMA) with different sample dimensions in different pressure environments. Three-dimensional (3-D) downward flame spread experiments on free PMMA slabs were conducted at five locations with different altitudes, which provide different pressures. Pressure effects on the flame spread rate, profile of pyrolysis front and flame height were analyzed at all altitudes. The flame spread rate in the steady-state stage was calculated based on the balance on the fuel surface and fuel properties. Results show that flame spread rate increases exponentially with pressure, and the exponent of pressure further shows an increasing trend with the thickness of the sample. The angle of the pyrolysis front emerged on sample residue in the width direction, which indicates a steady-burning stage, varies clearly with sample thicknesses and ambient pressures. A global non-dimensional equation was proposed to predict the variation tendency of the angle of the pyrolysis front with pressure and was found to fit well with the measured results. In addition, the dependence of average flame height on mass burning rate, sample dimension and pressure was proposed based on laminar diffusion flame theory. The fitted exponent of experimental data is 1.11, which is close to the theoretical value.