Search

This paper examines the impact of silicon in the AlCrFeMnNi high-entropy alloy system, focusing on both its microstructural and mechanical properties. Alloys with varying silicon content (x = 0, 0.3, 0.6, 0.9 atomic ratio) were synthesized using vacuum arc melting. The phase formation of these high-entropy alloys was analyzed using x-ray diffraction to comprehend the alloying process behaviour. The findings revealed that the solidification of the AlCrFeMnNi alloy occurred in dendritically, with dendrite cores containing Cr, Fe, and Ni, while interdendritic regions were enriched in Al and Ni after adding Silicon. Increasing the silicon content from 0 to 0.9 led to significant improvements in microhardness and wear resistance. This improvement is attributed to the reinforcement of grain boundaries provided by silicon. The formation of an Al and Ni rich B2 phase is crucial in resisting dislocation motion and preventing further deformation. Additionally, the addition of silicon led to improved corrosion resistance, as demonstrated by potentiodynamic polarization measurements. However, a trade-off was observed between compressive strength and ductility: compressive strength increased with higher silicon concentrations, but at the expense of ductility.

A multi-component category of an alloy containing very specific properties revolutionized the area of material science and the present engineering era. Laser cladding, a technique for surface coating, enhances surface quality and modifies properties using advanced coating technologies. In current trends, Laser cladding is mainly used in equipment and machine parts for enhancing surface properties, repairing damaged parts and surface coating caused by its advantages such as small heat-affected zone, low substrate damage, low dilution rate and exceptional metallurgical material bonding among coating and used substrate. Laser cladding improves substrates’ mechanical and various functional-specific properties, ensuring a high-quality balance between mechanical and surface attributes. The research society was able to investigate laser-cladding HEAs coatings because of the superior attributes of HEAs compared to ordinary alloys. This paper reviews current developments in laser-cladding HEAs coatings and the application of laser-cladding technology to HEAs materials. The laser cladding high-entropy alloy coatings have potential applications in corrosion, wear, and oxidation resistance, as well as their respective substrates. Cladded coatings composed of HEAs materials are measured to have shown potential applications in recent technology, opening exciting possibilities for the future. The study also discusses current trends and future prospects.

Generation of solid waste is the integral consequence of civilization and its management is stand-ing as a big challenge in front of state government at present time. Municipal solid waste in Durg-Bhilai is littered with improper places due to lack of understanding about the scientific im-portance of garbage and its consequences. Our foremost concern is the selection of appropriate dumping area nearby Durg-Bhilai (C.G.) and for the selection of appropriate dumping area, a multi criteria decision making technique is used. This paper attempts to evaluate 4 dumping areas based on 5 criteria. Analytical hierarchy process (AHP) is used to determine the weighs for each criterion and quality function deployment (QFD) is also implemented. The results indicate that Potiyakala was the best dumping site nearby Durg-Bhilai area.

In today’s global scenario of intense competition and environmental uncertainty flexibility in supply chain has an important role to play for the existence of any supply chain business. A need to be responsive to the constantly changing market scenario and cater to the customer needs, a certain degree of flexibility is required, which requires the coordination of many plants to produce and deliver goods to customers located in different places, and suppliers, which provide each plant with the required components. This paper intends to measure the degree of flexibility required for a two stage supply chain and assessing both the supplier flexibility and the assembler flexibility. In this paper, nine configurations of the SC are considered resulting from the combination of the three degrees of supplier and manufacturer flexibility, i.e. no flexibility, limited flexibility and total flexibility, respectively. Simulation model representing the different flexibility configurations are evaluated and the performance of each configuration analyzed to determine the flexibility configuration suitable to a supply chain. In particular the performance analysis of lead time, work-in-process, service level and cost are measured to determine the suitable flexibility.