Search

Bread wheat (T. aestivum) is one of the world’s most widely consumed cereals. Since micronutrient deficiencies are becoming more common among people who primarily depend upon cereal-based diets, a need for better-quality wheat varieties has been felt. An association panel of 154 T. aestivum lines was evaluated for the following quality traits: grain appearance (GA) score, grain hardness (GH), phenol reaction (PR) score, protein percent, sodium dodecyl sulfate (SDS) sedimentation value, and test weight (TWt). In addition, the panel was also phenotyped for grain yield and related traits such as days to heading, days to maturity, plant height, and thousand kernel weight for the year 2017–18 at the Borlaug Institute for South Asia (BISA) Ludhiana and Jabalpur sites. We performed a genome-wide association analysis on this panel using 18,351 genotyping-by-sequencing (GBS) markers to find marker-trait associations for quality and grain yield-related traits. We detected 55 single nucleotide polymorphism (SNP) marker trait associations (MTAs) for quality-related traits on chromosomes 7B (10), 1A (9), 2A (8), 3B (6), 2B (5), 7A (4), and 1B (3), with 3A, 4A, and 6D, having two and the rest, 4B, 5A, 5B, and 1D, having one each. Additionally, 20 SNP MTAs were detected for yield-related traits based on a field experiment conducted in Ludhiana on 7D (4) and 4D (3) chromosomes, while 44 SNP MTAs were reported for Jabalpur on chromosomes 2D (6), 7A (5), 2A (4), and 4A (4). Utilizing these loci in marker-assisted selection will benefit from further validation studies for these loci to improve hexaploid wheat for better yield and grain quality.

Bread wheat germplasm is accessed from the International Maize and Wheat Improvement Centre (CIMMYT) and the International Centre for Agricultural Research in the Dry Areas (ICARDA) by Australian wheat breeders and researchers through the CIMMYT Australia ICARDA Germplasm Evaluation (CAIGE) program. The CAIGE program coordinates the selection, importation, quarantine, dissemination, and evaluation of the imported bread wheat germplasm and the management of associated data and information. This paper describes the CAIGE model and assesses both the genetic and economic impacts of these materials on the Australian wheat industry after commercialisation of wheat breeding in the early 21st century and the establishment of CAIGE. The CAIGE concept was validated using data collected and analysed from multi-environment trials between 2017 and 2020. The impact of cultivars with and without CAIGE contribution to pedigree on yield was estimated using production-by-variety statistics. Net gain in yield, estimated as the yield difference between CAIGE and Non-CAIGE varieties, was multiplied by the percentage contribution to pedigree to estimate the additional yield. The CAIGE bread wheat program identified diverse, high-yielding, and disease-resistant germplasm and significantly improved the capture and dissemination of information. The benefit-cost ratio, calculated as the sum of benefits divided by investments, indicated that, for every dollar invested in CAIGE, a further $20 was generated in benefits. The internal rate of return was estimated at 163% and the modified rate at 18%. The benefits of these international materials to Australian wheat breeding remained significant.

Abstract The architectural design of polycyclic/multisubstituted pentafulvenes has demonstrated great potential for the development of electrochromic materials and biologically active motifs. Unfortunately, the enantioselective construction of such distinctive cores with all carbon quaternary chiral centers has remained untouched to date. Herein, we disclose an enantioselective homologating annulation of cyclopent-4-ene-dione with 3-cyano-4-methylcoumarins through L-tert-leucine derived thiourea catalysis, affording a wide range of enantioenriched polycyclic multisubstituted embedded aminopentafulvenes with excellent stereocontrol (up to 99:1 er) and chemical yields up to 87%. A detailed photophysical and cytotoxicity analysis of racemic and chiral homologated adducts unveils the exceptional behavior of chiral adducts over their racemic analogs, highlighting the importance of stereoselectivity of the developed scaffolds. A cellular uptake experiment in a mammalian fibroblast cell line confirmed the potential of developed polycyclic aminopentafulvene cores as a highly promising labeling dye that can be utilized for bioimaging without any adverse effects.

The goal of public breeding programs is to develop and disseminate improved varieties to farmers. This strategy aims at providing farming communities with superior crop varieties than they are growing. However, the strategy rarely considers the needs and preferences of farmers, especially gendered preferences, failing to solve real field problems by addressing the differences and inequalities prevalent in the farming communities. Our research examines how personal, household, agronomic and ecological characteristics of wheat growers in Bihar, India’s eastern Indo-Gangetic Plains, affect women and men’s wheat trait choices. Data were obtained from 1,003 households where both male and female respondents from the same household were interviewed. We accounted for 23 traits of wheat from a careful assessment of production, environment, cooking quality, market demand, and esthetic criteria. Binomial logistic regression was used to determine women’s and men’s trait preferences. The results imply that gender influences the preferences of wheat traits. Some traits are favored by both women and men, however, in other instances, there are striking disparities. For example, men choose wheat varieties that are well adapted to extreme climate conditions, have a higher grain yield, and produce chapati with a superior taste, while women prefer wheat types with superior chapati making quality, higher grain yield, and high market prices. Other socioeconomic, agronomic, cultural, and geolocational factors have a considerable impact on trait preferences. These human dimensions of traits preferred by women and men farmers are important for trait combinations to develop breeding product profiles for certain market segments.

The Aegilops tauschii-derived leaf rust resistance gene Lr42 has been widely used for breeding resistance wheat cultivars, but the molecular basis is unknown. Here, the authors show that Lr42 encodes an NLR-type of disease resistance gene by bulked segregant mapping in Ae. tauschii and confirm its function in common wheat.

The development and deployment of diverse resistance sources in new wheat cultivars underpin the durable control of stripe rust. In the present study, two loci for adult plant resistance (APR), QYrSM155.1 and QYrSM155.2, were identified in the Chinese wheat breeding line Shaanmai 155. QYrSM155.1 was mapped to a 3.0-cM interval between the single-nucleotide polymorphism (SNP) markers AX-109583610 and AX-110907562 on chromosome arm 2BL. QYrSM155.2 was mapped to a 2.1-cM interval flanked by the SNP markers AX-110378556 and AX-86173526 on chromosome arm 7AS. A genome-wide association study was used to identify markers associated with APR in a panel of 411 spring wheat lines. Thirteen and 11 SNPs were significantly associated with QYrSM155.1 and QYrSM155.2, respectively, corresponding to physical intervals of 653.75–655.52 Mb on 2BL and 81.63–83.93 Mb on 7AS. To characterize the haplotype variation and the distribution of these QTL, haplotype analysis was performed based on these SNPs in an independent panel of 1101 worldwide wheat accessions. Three major haplotypes (2B_h1, 2B_h2, and 2B_h3) for QYrSM155.1 and four major haplotypes (7A_h1, 7A_h2, 7A_h3, and 7A_h4) for QYrSM155.2 were identified. Accessions individually harboring QYrSM155.1_h1 and QYrSM155.2_h1 haplotypes and their combination displayed resistance. Additional assays of 1306 current Chinese cultivars and breeding lines using markers flanking QYrSM155.1 and QYrSM155.2 indicated that the resistance haplotypes of the two QTL were present in respectively 1.45% and 14.16% of lines. Increasing resistance haplotype frequencies at these two loci using marker-assisted selection should benefit wheat production in China.

Leaf rust (LR) and stripe rust (YR) are important diseases in wheat producing areas worldwide and cause severe yield losses under favorable environmental conditions when susceptible varieties are grown. We determined the genetic basis of resistance to LR and YR in variety Borlaug 100 by developing and phenotyping a population of 198 F6 recombinant inbred lines derived from a cross with the susceptible parent Apav#1. LR and YR phenotyping were conducted for 4 and 3 seasons, respectively, at CIMMYT research stations in Mexico under artificial epidemics. Mendelian segregation analyses indicated that 3–5 LR and 2 YR genes conferred resistance in Borlaug 100. Lr46/Yr29 (1BL), Yr17 (2AS) and Yr30 (3BS) were present in the resistant parent and segregated in the RIL population based on characterization by molecular markers linked to these genes. When present alone, Lr46/Yr29 caused average 13% and 16% reductions in LR and YR severities, respectively, in RILs. Similarly, Yr17 and Yr30 reduced YR severities by 57% and 11%, respectively. The Yr30 and the Yr17 translocation were also associated with 27% and 14% reductions, respectively, in LR severity, indicating that the 3BS and 2AS chromosomal regions likely carry new slow rusting LR resistance genes, temporarily designated as LrB1 and LrB2, respectively. Additive effects of Yr30*Yr17, Yr29*Yr17 and Yr29*Yr30 on YR and LR were significant and reduced YR severities by 56%, 55%, and 45%, respectively, and LR severities by 34%, 40%, and 45%, respectively. Furthermore, interaction between the three genes was also significant, with mean reductions of 70% for YR and 54% for LR severities. Borlaug 100, or any one of the 21 lines with variable agronomic traits but carrying all three co-located resistance loci, can be used as resistance sources in wheat breeding programs.

Genetic dissection of yield component traits including kernel characteristics is essential for the continuous improvement in wheat yield. In the present study, one recombinant inbred line (RIL) F6 population derived from a cross between Avocet and Chilero was used to evaluate the phenotypes of kernel traits of thousand-kernel weight (TKW), kernel length (KL), and kernel width (KW) in four environments at three experimental stations during the 2018–2020 wheat growing seasons. The high-density genetic linkage map was constructed with the diversity arrays technology (DArT) markers and the inclusive composite interval mapping (ICIM) method to identify the quantitative trait loci (QTLs) for TKW, KL, and KW. A total of 48 QTLs for three traits were identified in the RIL population on the 21 chromosomes besides 2A, 4D, and 5B, accounting for 3.00%–33.85% of the phenotypic variances. Based on the physical positions of each QTL, nine stable QTL clusters were identified in the RILs, and among these QTL clusters, TaTKW-1A was tightly linked to the DArT marker interval 3950546–1213099, explaining 10.31%–33.85% of the phenotypic variances. A total of 347 high-confidence genes were identified in a 34.74-Mb physical interval. TraesCS1A02G045300 and TraesCS1A02G058400 were among the putative candidate genes associated with kernel traits, and they were expressed during grain development. Moreover, we also developed high-throughput kompetitive allele-specific PCR (KASP) markers of TaTKW-1A, validated in a natural population of 114 wheat varieties. The study provides a basis for cloning the functional genes underlying the QTL for kernel traits and a practical and accurate marker for molecular breeding.

Developing wheat varieties with durable resistance is a core objective of the International Maize and Wheat Improvement Center (CIMMYT) and many other breeding programs worldwide. The CIMMYT advanced wheat line “Mucuy” displayed high levels of resistance to stripe rust (YR) and leaf rust (LR) in field evaluations in Mexico and several other countries. To determine the genetic basis of YR and LR resistance, 138 F5 recombinant inbred lines (RILs) derived from the cross of Apav#1× Mucuy were phenotyped for YR responses from 2015 to 2020 at field sites in India, Kenya, and Mexico, and LR in Mexico. Seedling phenotyping for YR and LR responses was conducted in the greenhouse in Mexico using the same predominant races as in field trials. Using 12,681 polymorphic molecular markers from the DArT, SNP, and SSR genotyping platforms, we constructed genetic linkage maps and QTL analyses that detected seven YR and four LR resistance loci. Among these, a co-located YR/LR resistance loci was identified as Yr29/Lr46, and a seedling stripe rust resistance gene YrMu was mapped on the 2AS/2NS translocation. This fragment also conferred moderate adult plant resistance (APR) under all Mexican field environments and in one season in Kenya. Field trial phenotyping with Lr37-virulent Puccinia triticina races indicated the presence of an APR QTL accounting for 18.3–25.5% of the LR severity variation, in addition to a novel YR resistance QTL, QYr.cim-3DS, derived from Mucuy. We developed breeder-friendly KASP and indel molecular markers respectively for Yr29/Lr46 and YrMu. The current study validated the presence of known genes and identified new resistance loci, a QTL combination effect, and flanking markers to facilitate accelerated breeding for genetically complex, durable rust resistance.

Conservation agriculture (CA) is an agronomic management system based on zero tillage and residue retention. Due to its potential for climate change adaptation through the reduction of soil erosion and improved water availability, CA is becoming more important in many regions of the world. However, increased bulk density and large amounts of crop residues may be a constraint for early plant establishment. This holds especially true under irrigated production areas with high yield potential. Genotype × tillage effects on yield are not well understood and it is unclear whether tillage should be an evaluation factor in breeding programs.Fourteen CIMMYT bread (Triticum aestivum) and thirteen durum (Triticum turgidum) wheat genotypes, created between 1964 and 2011, were tested for yield and agronomic performance at CIMMYT's experimental station near Ciudad Obregon, Mexico, during nine seasons. The genotypes were subjected to different tillage and irrigation treatments which consisted of conventional and permanent raised beds with full and reduced irrigation. The dataset includes traits collected during the growing period (days to emergence, days to flowering, maturity, plant height, NDVI, days from flowering to maturity, grain production rate) and at harvest (yield, harvest index, thousand grain weight, spikes/m², grains/m², test weight) and weather data (daily minimum and maximum temperature, rainfall). Six years of data of 26 genotypes were published along with the Honsdorf et al. (2018) paper in Field Crops Research (DOI: s10.1016/j.fcr.2017.11.011). This updated dataset includes three additional seasons of data (harvest years 2016 to 2018) and an additional bread wheat genotype (Borlaug100).

Leaf rust and stripe rust are important wheat diseases worldwide causing significant losses where susceptible varieties are grown. Resistant cultivars offer long-term control and reduce the use of hazardous chemicals, which can be detrimental to both human health and the environment. Land races have been a valuable resource for mining new genes for various abiotic and biotic stresses including wheat rusts. Afghan wheat landrace “KU3067” displayed high seedling infection type (IT) for leaf rust and low IT for stripe rust; however, it displayed high levels of field resistance for both rusts when tested for multiple seasons against the Mexican rust isolates. This study focused on identifying loci-conferring seedling resistance to stripe rust, and also loci-conferring adult plant resistance (APR) against the Mexican races of leaf rust and stripe rust. A backcrossed inbred line (BIL) population advanced to the BC1F5 generation derived from the cross of KU3067 and Apav (triple rust susceptible line) was used for both, inheritance and QTL mapping studies. The population and parents were genotyped with Diversity Arrays Technology-genotyping-by-sequencing (DArT-Seq) and phenotyped for leaf rust and stripe rust response at both seedling and adult plant stages during multiple seasons in Mexico with relevant pathotypes. Mapping results identified an all-stage resistance gene for stripe rust, temporarily designated as YrKU, on chromosome 7BL. In total, six QTL-conferring APR to leaf rust on 1AS, 2AL, 4DL, 6BL, 7AL, and 7BL, and four QTL for stripe rust resistance on 1BS, 2AL, 4DL, and 7BL were detected in the analyses. Among these, pleiotropic gene Lr67/Yr46 on 4DL with a significantly large effect is the first report in an Afghan landrace-conferring resistance to both leaf and stripe rusts. QLr.cim-7BL/YrKU showed pleiotropic resistance to both rusts and explained 7.5–17.2 and 12.6–19.3% of the phenotypic variance for leaf and stripe rusts, respectively. QYr.cim-1BS and QYr.cim-2AL detected in all stripe environments with phenotypic variance explained (PVE) 12.9–20.5 and 5.4–12.5%, and QLr.cim-6BL are likely to be new. These QTL and their closely linked markers will be useful for fine mapping and marker-assisted selection (MAS) in breeding for durable resistance to multiple rust diseases.

Accelerating breeding efforts for developing biofortified bread wheat varieties necessitates understanding the genetic control of grain zinc concentration (GZnC) and grain iron concentration (GFeC). Hence, the major objective of this study was to perform genome-wide association mapping to identify consistently significant genotyping-by-sequencing markers associated with GZnC and GFeC using a large panel of 5,585 breeding lines from the International Maize and Wheat Improvement Center. These lines were grown between 2018 and 2021 in an optimally irrigated environment at Obregon, Mexico, while some of them were also grown in a water-limiting drought-stressed environment and a space-limiting small plot environment and evaluated for GZnC and GFeC. The lines showed a large and continuous variation for GZnC ranging from 27 to 74.5 ppm and GFeC ranging from 27 to 53.4 ppm. We performed 742,113 marker-traits association tests in 73 datasets and identified 141 markers consistently associated with GZnC and GFeC in three or more datasets, which were located on all wheat chromosomes except 3A and 7D. Among them, 29 markers were associated with both GZnC and GFeC, indicating a shared genetic basis for these micronutrients and the possibility of simultaneously improving both. In addition, several significant GZnC and GFeC associated markers were common across the irrigated, water-limiting drought-stressed, and space-limiting small plots environments, thereby indicating the feasibility of indirect selection for these micronutrients in either of these environments. Moreover, the many significant markers identified had minor effects on GZnC and GFeC, suggesting a quantitative genetic control of these traits. Our findings provide important insights into the complex genetic basis of GZnC and GFeC in bread wheat while implying limited prospects for marker-assisted selection and the need for using genomic selection.

Spot blotch caused by the fungus Bipolaris sorokiniana poses a serious threat to bread wheat production in warm and humid wheat-growing regions of the world. Hence, the major objective of this study was to identify consistent genotyping-by-sequencing (GBS) markers associated with spot blotch resistance using genome-wide association mapping on a large set of 6,736 advanced bread wheat breeding lines from the International Maize and Wheat Improvement Center. These lines were phenotyped as seven panels at Agua Fria, Mexico between the 2013–2014 and 2019–2020 crop cycles. We identified 214 significant spot blotch associated GBS markers in all the panels, among which only 96 were significant in more than one panel, indicating a strong environmental effect on the trait and highlights the need for multiple phenotypic evaluations to identify lines with stable spot blotch resistance. The 96 consistent GBS markers were on chromosomes 1A, 1B, 1D, 2A, 3B, 4A, 5B, 5D, 6B, 7A, 7B, and 7D, including markers possibly linked to the Lr46, Sb1, Sb2 and Sb3 genes. We also report the association of the 2NS translocation from Aegilops ventricosa with spot blotch resistance in some environments. Moreover, the spot blotch favorable alleles at the 2NS translocation and two markers on chromosome 3BS (3B_2280114 and 3B_5601689) were associated with increased grain yield evaluated at several environments in Mexico and India, implying that selection for favorable alleles at these loci could enable simultaneous improvement for high grain yield and spot blotch resistance. Furthermore, a significant relationship between the percentage of favorable alleles in the lines and their spot blotch response was observed, which taken together with the multiple minor effect loci identified to be associated with spot blotch in this study, indicate quantitative genetic control of resistance. Overall, the results presented here have extended our knowledge on the genetic basis of spot blotch resistance in bread wheat and further efforts to improve genetic resistance to the disease are needed for reducing current and future losses under climate change.

Biofortification of cereal grains offers a lasting solution to combat micronutrient deficiency in developing countries where it poses developmental risks to children. Breeding efforts thus far have been directed toward increasing the grain concentrations of iron (Fe) and zinc (Zn) ions. Phytic acid (PA) chelates these metal ions, reducing their bioavailability in the digestive tract. We present a high-throughput assay for quantification of PA and its application in screening a breeding population. After extraction in 96-well megatiter plates, PA content was determined from the phosphate released after treatment with a commercially available phytase enzyme. In a set of 330 breeding lines of wheat grown in the field over 3 years as part of a HarvestPlus breeding program for high grain Fe and Zn, our assay unraveled variation for PA that ranged from 0.90 to 1.72% with a mean of 1.24%. PA content was not associated with grain yield. High yielding lines were further screened for low molar PA/Fe and PA/Zn ratios for increased metal ion bioavailability, demonstrating the utility of our assay. Genome-wide association study revealed 21 genetic associations, six of which were consistent across years. Five of these associations mapped to chromosomes 1A, 2A, 2D, 5A, and 7D. Additivity over four of these haplotypes accounted for an ∼10% reduction in PA. Our study demonstrates it is possible to scale up assays to directly select for low grain PA in forward breeding programs.

Wheat blast is an emerging threat to wheat production, due to its recent migration to South Asia and Sub-Saharan Africa. Because genomic selection (GS) has emerged as a promising breeding strategy, the key objective of this study was to evaluate it for wheat blast phenotyped at precision phenotyping platforms in Quirusillas (Bolivia), Okinawa (Bolivia) and Jashore (Bangladesh) using three panels: (i) a diversity panel comprising 172 diverse spring wheat genotypes, (ii) a breeding panel comprising 248 elite breeding lines, and (iii) a full-sibs panel comprising 298 full-sibs. We evaluated two genomic prediction models (the genomic best linear unbiased prediction or GBLUP model and the Bayes B model) and compared the genomic prediction accuracies with accuracies from a fixed effects model (with selected blast-associated markers as fixed effects), a GBLUP + fixed effects model and a pedigree relationships-based model (ABLUP). On average, across all the panels and environments analyzed, the GBLUP + fixed effects model (0.63 ± 0.13) and the fixed effects model (0.62 ± 0.13) gave the highest prediction accuracies, followed by the Bayes B (0.59 ± 0.11), GBLUP (0.55 ± 0.1), and ABLUP (0.48 ± 0.06) models. The high prediction accuracies from the fixed effects model resulted from the markers tagging the 2NS translocation that had a large effect on blast in all the panels. This implies that in environments where the 2NS translocation-based blast resistance is effective, genotyping one to few markers tagging the translocation is sufficient to predict the blast response and genome-wide markers may not be needed. We also observed that marker-assisted selection (MAS) based on a few blast-associated markers outperformed GS as it selected the highest mean percentage (88.5%) of lines also selected by phenotypic selection and discarded the highest mean percentage of lines (91.8%) also discarded by phenotypic selection, across all panels. In conclusion, while this study demonstrates that MAS might be a powerful strategy to select for the 2NS translocation-based blast resistance, we emphasize that further efforts to use genomic tools to identify non-2NS translocation-based blast resistance are critical.

A collection of 482 tetraploid wheat accessions from the CIMMYT Germplasm Bank was screened in the greenhouse for resistance to leaf rust disease caused by the fungus Puccinia triticina E. The accessions were screened against two races CBG/BP and BBG/BP in the field at two locations: against race CBG/BP at the Norman E. Borlaug Experimental Station (CENEB) located in the Yaqui Valley in the northern state of Sonora in Mexico during the 2014–2015 growing season; and against race BBG/BP at CIMMYT headquarters in El Batan, Texcoco, in the state of Mexico in the summer of 2015. Among the accessions, 79 durum genotypes were identified, of which 68 continued demonstrating their resistance in the field (past the seedling stage) against the two leaf rust races. An additional set of 41 genotypes was susceptible at the seedling stage, but adult plant race-specific resistance was identified in the field. The 79 seedling-resistant genotypes were tested against 15 different leaf rust races at the seedling stage to measure the usefulness of their resistance in a breeding program. Among the 79 accessions tested, 35 were resistant to all races used in the tests. Two sample sources, CIMMYT (18/35) pre-breeding germplasm and Ethiopian landraces (17/35), showed seedling resistance to all races tested except for seven landraces from Ethiopia, which became susceptible to the Cirno race identified in 2017.

Wheat occupies a special role in global food security since, in addition to providing 20% of our carbohydrates and protein, almost 25% of the global production is traded internationally. The importance of wheat for food security was recognised by the Chief Agricultural Scientists of the G20 group of countries when they endorsed the establishment of the Wheat Initiative in 2011. The Wheat Initiative was tasked with supporting the wheat research community by facilitating collaboration, information and resource sharing and helping to build the capacity to address challenges facing production in an increasingly variable environment. Many countries invest in wheat research. Innovations in wheat breeding and agronomy have delivered enormous gains over the past few decades, with the average global yield increasing from just over 1 tonne per hectare in the early 1960s to around 3.5 tonnes in the past decade. These gains are threatened by climate change, the rapidly rising financial and environmental costs of fertilizer, and pesticides, combined with declines in water availability for irrigation in many regions. The international wheat research community has worked to identify major opportunities to help ensure that global wheat production can meet demand. The outcomes of these discussions are presented in this paper.

A primary selection target for wheat (Triticum aestivum) improvement is grain yield. However, the selection for yield is limited by the extent of field trials, fluctuating environments, and the time needed to obtain multiyear assessments. Secondary traits such as spectral reflectance and canopy temperature (CT), which can be rapidly measured many times throughout the growing season, are frequently correlated with grain yield and could be used for indirect selection in large populations particularly in earlier generations in the breeding cycle prior to replicated yield testing. While proximal sensing data collection is increasingly implemented with high-throughput platforms that provide powerful and affordable information, efficient and effective use of these data is challenging. The objective of this study was to monitor wheat growth and predict grain yield in wheat breeding trials using high-density proximal sensing measurements under extreme terminal heat stress that is common in Bangladesh. Over five growing seasons, we analyzed normalized difference vegetation index (NDVI) and CT measurements collected in elite breeding lines from the International Maize and Wheat Improvement Center at the Regional Agricultural Research Station, Jamalpur, Bangladesh. We explored several variable reduction and regularization techniques followed by using the combined secondary traits to predict grain yield. Across years, grain yield heritability ranged from 0.30 to 0.72, with variable secondary trait heritability (0.0–0.6), while the correlation between grain yield and secondary traits ranged from −0.5 to 0.5. The prediction accuracy was calculated by a cross-fold validation approach as the correlation between observed and predicted grain yield using univariate and multivariate models. We found that the multivariate models resulted in higher prediction accuracies for grain yield than the univariate models. Stepwise regression performed equal to, or better than, other models in predicting grain yield. When incorporating all secondary traits into the models, we obtained high prediction accuracies (0.58–0.68) across the five growing seasons. Our results show that the optimized phenotypic prediction models can leverage secondary traits to deliver accurate predictions of wheat grain yield, allowing breeding programs to make more robust and rapid selections.

Wheat (Triticum aestivum L.) is the most widely grown cereal crop in the world and is staple food to half the world’s population. The current world population is expected to reach 9.8 billion people by 2050, but food production is not expected to keep pace with demand in developing countries. Significant opportunities exist for traditional grain exporters to produce and export greater amounts of wheat to fill the gap. Karnal bunt, however, is a major threat, due to its use as a non-tariff trade barrier by several wheat-importing countries. The cultivation of resistant varieties remains the most cost-effective approach to manage the disease, but in countries that are free of the disease, genetic improvement is difficult due to quarantine restrictions. Here we report a study on pre-emptive breeding designed to identify linked molecular markers, evaluate the prospects of genomic selection as a tool, and prioritise wheat genotypes suitable for use as parents. In a genome-wide association (GWAS) study, we identified six DArTseq markers significantly linked to Karnal bunt resistance, which explained between 7.6 and 29.5% of the observed phenotypic variation. The accuracy of genomic prediction was estimated to vary between 0.53 and 0.56, depending on whether it is based solely on the identified Quantitative trait loci (QTL) markers or the use of genome-wide markers. As genotypes used as parents would be required to possess good yield and phenology, further research was conducted to assess the agronomic value of Karnal bunt resistant germplasm from the International Maize and Wheat Improvement Center (CIMMYT). We identified an ideal genotype, ZVS13_385, which possessed similar agronomic attributes to the highly successful Australian wheat variety, Mace. It is phenotypically resistant to Karnal bunt infection (

Hyperspectral reflectance phenotyping and genomic selection are two emerging technologies that have the potential to increase plant breeding efficiency by improving prediction accuracy for grain yield. Hyperspectral cameras quantify canopy reflectance across a wide range of wavelengths that are associated with numerous biophysical and biochemical processes in plants. Genomic selection models utilize genome-wide marker or pedigree information to predict the genetic values of breeding lines. In this study, we propose a multi-kernel GBLUP approach to genomic selection that uses genomic marker-, pedigree-, and hyperspectral reflectance-derived relationship matrices to model the genetic main effects and genotype × environment (G × E) interactions across environments within a bread wheat (Triticum aestivum L.) breeding program. We utilized an airplane equipped with a hyperspectral camera to phenotype five differentially managed treatments of the yield trials conducted by the Bread Wheat Improvement Program of the International Maize and Wheat Improvement Center (CIMMYT) at Ciudad Obregón, México over four breeding cycles. We observed that single-kernel models using hyperspectral reflectance-derived relationship matrices performed similarly or superior to marker- and pedigree-based genomic selection models when predicting within and across environments. Multi-kernel models combining marker/pedigree information with hyperspectral reflectance phentoypes had the highest prediction accuracies; however, improvements in accuracy over marker- and pedigree-based models were marginal when correcting for days to heading. Our results demonstrate the potential of using hyperspectral imaging to predict grain yield within a multi-environment context and also support further studies on the integration of hyperspectral reflectance phenotyping into breeding programs.

Wheat blast (WB) is a destructive disease in South America and its first outbreak in Bangladesh in 2016 posed a great risk to food security of South Asian countries. A genome wide association study (GWAS) was conducted on a diverse panel of 184 wheat genotypes from South Asia and CIMMYT. Phenotyping was conducted in eight field experiments in Bolivia and Bangladesh and a greenhouse experiment in the United States. Genotypic data included 11,401 SNP markers of the Illumina Infinium 15K BeadChip and four additional STS markers on the 2NS/2AS translocation region. Accessions with stable WB resistance across experiments were identified, which were all 2NS carriers. Nevertheless, a dozen moderately resistant 2AS lines were identified, exhibiting big variation among experiments. Significant marker-trait associations (MTA) were detected on chromosomes 1BS, 2AS, 6BS, and 7BL; but only MTAs on 2AS at the 2NS/2AS translocation region were consistently significant across experiments. The resistant accessions identified in this study could be used in production in South Asian countries as a preemptive strategy to prevent WB outbreak.

The development of high-throughput genotyping and phenotyping has provided access to many tools to accelerate plant breeding programs. Unmanned Aerial Systems (UAS)-based remote sensing is being broadly implemented for field-based high-throughput phenotyping due to its low cost and the capacity to rapidly cover large breeding populations. The Structure-from-Motion photogrammetry processes aerial images taken from multiple perspectives over a field to an orthomosaic photo of a complete field experiment, allowing spectral or morphological trait extraction from the canopy surface for each individual field plot. However, some phenotypic information observable in each raw aerial image seems to be lost to the orthomosaic photo, probably due to photogrammetry processes such as pixel merging and blending. To formally assess this, we introduced a set of image processing methods to extract phenotypes from orthorectified raw aerial images and compared them to the negative control of extracting the same traits from processed orthomosaic images. We predict that standard measures of accuracy in terms of the broad-sense heritability of the remote sensing spectral traits will be higher using the orthorectified photos than with the orthomosaic image. Using three case studies, we therefore compared the broad-sense heritability of phenotypes in wheat breeding nurseries including, (1) canopy temperature from thermal imaging, (2) canopy normalized difference vegetation index (NDVI), and (3) early-stage ground cover from multispectral imaging. We evaluated heritability estimates of these phenotypes extracted from multiple orthorectified aerial images via four statistical models and compared the results with heritability estimates of these phenotypes extracted from a single orthomosaic image. Our results indicate that extracting traits directly from multiple orthorectified aerial images yielded increased estimates of heritability for all three phenotypes through proper modeling, compared to estimation using traits extracted from the orthomosaic image. In summary, the image processing methods demonstrated in this study have the potential to improve the quality of the plant trait extracted from high-throughput imaging. This, in turn, can enable breeders to utilize phenomics technologies more effectively for improved selection.

The title compound, C25H22N2O2Se, crystallizes in the space group P21/c with one molecule in the asymmetric unit. The compound was synthesized by the addition of phenylselenyl bromide to a cyanamide. The phenylselenyl portion and the cyano group, as well as the ketone functional group in the cyclohexa-2,5-dien-1-one portion of the structure, are disordered, with occupancy factors of 0.555 (14) and 0.445 (14).

Droughts and high temperatures are the main abiotic constraints hampering durum wheat production. This study investigated the accumulation of phenolic acids (PAs) in the wholemeal flour of six durum wheat cultivars under drought and heat stress. Phenolic acids were extracted from wholemeals and analysed through HPLC-DAD analysis. Ferulic acid was the most represented PA, varying from 390.1 to 785.6 µg/g dry matter across all cultivars and growth conditions, followed by sinapic acids, p-coumaric, vanillic, syringic, and p-hydroxybenzoic acids. Among the cultivars, Cirno had the highest PAs content, especially under severe drought conditions. Heat stress enhanced the accumulation of minor individual PAs, whereas severe drought increased ferulic acid and total PAs. Broad-sense heritability was low (0.23) for p-coumaric acid but ≥0.69 for all other components. Positive correlations occurred between PA content and grain morphology and between test weight and grain yield. Durum wheat genotypes with good yields and high accumulation of PAs across different growing conditions could be significant for durum wheat resilience and health-promoting value.

The greenbug, Schizaphis graminum Rondani, significantly reduces wheat, Triticum aestivum L., grain yields if not controlled. Host plant resistance (HPR) can protect yield, is environmentally friendly and easy to use. Our objectives were to: (1) identify genomic regions associated with S. graminum resistance in a recombinant inbred line (RIL) population derived from a cross of “Sokoll” (resistant) and “Weebill1” (moderately susceptible), (2) evaluate Sokoll derived breeding germplasm for resistance, and (3) conduct allelism tests between Sokoll and sources carrying resistance genes Gba, Gbb, and Gbd. Resistance was measured quantitatively and qualitatively using a SPAD meter and visual assessments, respectively. We identified a large effect resistance gene on chromosome arm 7DL of Sokoll, herein referred as GbSkl, which contributed up to 24% of the phenotypic variation. Other minor QTL on chromosomes 2B, 3A, and 7B were also identified. The QTL on 2B and 3A originated from Weebill1. Of the Sokoll derived germplasm, 13% displayed resistance. Allelism tests indicated that GbSkl could be allelic or tightly linked to the temporarily designated genes Gba, Gbb, and Gbd. Utility of SPAD to determine quantitative variation in resistance phenotyping is demonstrated and breeding efforts are underway to transfer the resistance from Sokoll to new CIMMYT elite germplasm.

Novel high-throughput phenotyping (HTP) approaches are needed to advance the understanding of genotype-to-phenotype and accelerate plant breeding. The first generation of HTP has examined simple spectral reflectance traits from images and sensors but is limited in advancing our understanding of crop development and architecture. Lodging is a complex trait that significantly impacts yield and quality in many crops including wheat. Conventional visual assessment methods for lodging are time-consuming, relatively low-throughput, and subjective, limiting phenotyping accuracy and population sizes in breeding and genetics studies. Here, we demonstrate the considerable power of unmanned aerial systems (UAS) or drone-based phenotyping as a high-throughput alternative to visual assessments for the complex phenological trait of lodging, which significantly impacts yield and quality in many crops including wheat. We tested and validated quantitative assessment of lodging on 2,640 wheat breeding plots over the course of 2 years using differential digital elevation models from UAS. High correlations of digital measures of lodging to visual estimates and equivalent broad-sense heritability demonstrate this approach is amenable for reproducible assessment of lodging in large breeding nurseries. Using these high-throughput measures to assess the underlying genetic architecture of lodging in wheat, we applied genome-wide association analysis and identified a key genomic region on chromosome 2A, consistent across digital and visual scores of lodging. However, these associations accounted for a very minor portion of the total phenotypic variance. We therefore investigated whole genome prediction models and found high prediction accuracies across populations and environments. This adequately accounted for the highly polygenic genetic architecture of numerous small effect loci, consistent with the previously described complex genetic architecture of lodging in wheat. Our study provides a proof-of-concept application of UAS-based phenomics that is scalable to tens-of-thousands of plots in breeding and genetic studies as will be needed to uncover the genetic factors and increase the rate of gain for complex traits in crop breeding.

The recent availability of an assembled and annotated genome reference sequence for the diploid crop barley (Hordeum vulgare L.) provides new opportunities to study the genetic basis of agronomically important traits such as resistance to stripe [Puccinia striiformis f. sp. hordei (Psh)], leaf [P. hordei (Ph)], and stem [P. graminis f. sp. tritici (Pgt)] rust diseases. The European barley cultivar Pompadour is known to possess high levels of resistance to leaf rust, predominantly due to adult plant resistance (APR) gene Rph20. We developed a barley recombinant inbred line (RIL) population from a cross between Pompadour and the leaf rust and stripe rust susceptible selection Biosaline-19 (B-19), and genotyped this population using DArT-Seq genotyping by sequencing (GBS) markers. In the current study, we produced a high-density linkage map comprising 8,610 (SNP and in silico) markers spanning 5957.6 cM, with the aim of mapping loci for resistance to leaf rust, stem rust, and stripe rust. The RIL population was phenotyped in the field with Psh (Mexico and Ecuador) and Ph (Australia) and in the greenhouse at the seedling stage with Australian Ph and Pgt races, and at Wageningen University with a European variant of Psh race 24 (PshWUR). For Psh, we identified a consistent field QTL on chromosome 2H across all South American field sites and years. Two complementary resistance genes were mapped to chromosomes 1H and 4H at the seedling stage in response to PshWUR, likely to be the loci rpsEm1 and rpsEm2 previously reported from the cultivar Emir from which Pompadour was bred. For leaf rust, we determined that Rph20 in addition to two minor-effect QTL on 1H and 3H were effective at the seedling stage, whilst seedling resistance to stem rust was due to QTL on chromosomes 3H and 7H conferred by Pompadour and B-19, respectively.

In this study, we used genotype × environment interactions (G×E) models for hybrid prediction, where similarity between lines was assessed by pedigree and molecular markers, and similarity between environments was accounted for by environmental covariables. We use five genomic and pedigree models (M1–M5) under four cross-validation (CV) schemes: prediction of hybrids when the training set (i) includes hybrids of all males and females evaluated only in some environments (T2FM), (ii) excludes all progenies from a randomly selected male (T1M), (iii) includes all progenies from 20% randomly selected females in combination with all males (T1F), and (iv) includes one randomly selected male plus 40% randomly selected females that were crossed with it (T0FM). Models were tested on a total of 1888 wheat ( L.) hybrids including 18 males and 667 females in three consecutive years. For grain yield, the most complex model (M5) under T2FM had slightly higher prediction accuracy than the less complex model. For T1F, the prediction accuracy of hybrids for grain yield and other traits of the most complete model was 0.50 to 0.55. For T1M, Model M3 exhibited high prediction accuracies for flowering traits (0.71), whereas the more complex model (M5) demonstrated high accuracy for grain yield (0.5). For T0FM, the prediction accuracy for grain yield of Model M5 was 0.61. Including genomic and pedigree gave relatively high prediction accuracy even when both parents were untested. Results show that it is possible to predict unobserved hybrids when modeling genomic general combining ability (GCA) and specific combining ability (SCA) and their interactions with environments.

Breeding wheat with enhanced levels of grain zinc (Zn) and iron (Fe) is a cost-effective, sustainable solution to malnutrition problems. Modern wheat varieties have limited variation in grain Zn and Fe, but large-scale screening has identified high levels of Zn and Fe in wild relatives and progenitors of cultivated wheat. The most promising sources of high Zn and Fe are einkorn (Triticum monococcum), wild emmer (T. dicoccoides), diploid progenitors of hexaploid wheat (such as Aegilops tauschii), T. spelta, T. polonicum, and landraces of T. aestivum. This study evaluate the effects of translocations from rye and different Aegilops species in a “Pavon-76” wheat genetic background and utilized in the wheat biofortification breeding program at CIMMYT that uses diverse genetic resources, including landraces, recreated synthetic hexaploids, T. spelta and pre-breeding lines. Four translocations were identified that resulted significantly higher Zn content in “Pavon 76” genetic background than the check varieties, and they had increased levels of grain Fe as well-compared to “Pavon 76.” These lines were also included in the breeding program aimed to develop advanced high Zn breeding lines. Advanced lines derived from diverse crosses were screened under Zn-enriched soil conditions in Mexico during the 2017 and 2018 seasons. The Zn content of the grain was ranging from 35 to 69 mg/kg during 2017 and 38 to 72 mg/kg during 2018. Meanwhile grain Fe ranged from 30 to 43 mg/kg during 2017 and 32 to 52 mg/kg during 2018. A highly significant positive correlation was found between Zn and Fe (r = 0.54; P < 0.001) content of the breeding lines, therefore it was possible to breed for both properties in parallel. Yield testing of the advanced lines showed that 15% (2017) and 24% (2018) of the lines achieved 95–110% yield potential of the commercial checks and also had 12 mg/kg advantage in the Zn content suggesting that greater genetic gains and farmer-preferred wheat varieties were developed and deployed. A decade of research and breeding efforts led to the selection of “best-bet” breeding lines and the release of eight biofortified wheat varieties in target regions of South Asia and in Mexico.

Twelve new azole compounds were synthesized through an ene reaction involving methylidene heterocycles and phenylmaleimide, producing four oxazoles, five thiazoles, and one pyridine derivative, and ethyl glyoxylate for an oxazole and a thiazole compound. The twelve azoles have a stereogenic center in their structure. Hence, a method to separate the enantiomeric pairs, must be provided if any further study of chemical and pharmacological importance of these compounds is to be accomplished. Six chiral stationary phases were assayed: four were based on macrocyclic glycopeptide selectors and two on linear carbohydrates, i.e., derivatized maltodextrin and amylose. The enantiomers of the entire set of new chiral azole compounds were separated using three different mobile phase elution modes: normal phase, polar organic, and reversed phase. The most effective chiral stationary phase was the MaltoShell column, which was able to separate ten of the twelve compounds in one elution mode or another. Structural similarities in the newly synthesized oxazoles provided some insights into possible chiral recognition mechanisms.

Genomic selection (GS) has been promising for increasing genetic gains in several species. Therefore, we evaluated the potential integration of GS for grain yield (GY) in bread wheat ( L.) in CIMMYT’s elite yield trial nurseries. We observed that the genomic prediction accuracies within nurseries (0.44 and 0.35) were substantially higher than across-nursery accuracies (0.15 and 0.05) for GY evaluated in the bed and flat planting systems, respectively. The accuracies from using only a subset of 251 genotyping-by-sequencing markers were comparable to the accuracies using all 2038 markers. We also used the item-based collaborative filtering approach for incorporating other related traits in predicting GY and observed that it outperformed genomic predictions across nurseries, but was less predictive when trait correlations with GY were low. Furthermore, we compared GS and phenotypic selections (PS) and observed that at a selection intensity of 0.5, GS could select a maximum of 70.9 and 61.5% of the top lines and discard 71.5 and 60.5% of the poor lines selected or discarded by PS within and across nurseries, respectively. Comparisons of GS and pedigree-based predictions revealed that the advantage of GS over the pedigree was moderate in populations without full-sibs. However, GS was less advantageous for within-family selections in elite families with few full-sibs and minimal Mendelian sampling variance. Overall, our results demonstrate the importance of applying GS for GY at the appropriate stage of the breeding cycle, and we speculate that gains can be maximized if it is implemented in early-generation within-family selections.

Races belonging to Ug99 lineage of stem rust fungus Pucciniagraminis f. sp. tritici (Pgt) continue to pose a threat to wheat (Triticumaestivum L.) production in various African countries. Growing resistant varieties is the most economical and environmentally friendly control measure. Recombinant inbred line (RIL) populations from the crosses of susceptible parent ‘Cacuke’ with the resistant parents ‘Huhwa’ and ‘Yaye’ were phenotyped for resistance at the seedling stage to Pgt race TTKSK (Ug99) and in adult plants in field trials at Njoro, Kenya for two seasons in 2016. Using the Affymetrix Axiom breeders SNP array, two stem rust resistance genes, temporarily designated as SrH and SrY, were identified and mapped on chromosome arm 2BL through selective genotyping and bulked segregant analysis (BSA), respectively. Kompetitive allele specific polymorphism (KASP) markers and simple sequence repeat (SSR) markers were used to saturate chromosome arm 2BL in both RIL populations. SrH mapped between markers cim109 and cim114 at a distance of 0.9 cM proximal, and cim117 at 2.9 cM distal. SrY was flanked by markers cim109 and cim116 at 0.8 cM proximal, and IWB45932 at 1.9 cM distal. Two Ug99-effective stem rust resistance genes derived from bread wheat, Sr9h and Sr28, have been reported on chromosome arm 2BL. Infection types and map position in Huhwa and Yaye indicated that Sr28 was absent in both the parents. However, susceptible reactions produced by resistant lines from both populations against Sr9h-virulent race TTKSF+ confirmed the presence of a common resistance locus Sr9h in both lines. Test of allelism is required to establish genetic relationships between genes identified in present study and Sr9h. Marker cim117 linked to SrH was genotyped on set of wheat lines with Huhwa in the pedigree and is advised to be used for marker assisted selection for this gene, however, a combination of phenotypic and genotypic assays is desirable for both genes especially for selection of Sr9h in breeding programs.

Karnal bunt (KB) of wheat, caused by Tilletia indica, is one of the greatest challenges to grain industry, not because of yield loss, but quarantine regulations that restrict international movement and trade of affected stocks. Genetic resistance is the best way to manage this disease. Although several different sources of resistance have been identified to date, very few of those have been subjected to genetic analyses. Understanding the genetics of resistance, characterization and mapping of new resistance loci can help in development of improved germplasm. The objective of this study was to identify and characterize resistance loci (QTL) in two independent recombinant inbred lines (RILs) populations utilizing different wheat lines as resistance donors. Elite CIMMYT wheat lines Blouk#1 and Huirivis#1 were used as susceptible female parents and WHEAR/KUKUNA/3/C80.1/3∗BATAVIA//2∗WBLL1 (WKCBW) and Mutus as moderately resistant male parents in Pop1 and Pop2 populations, respectively. Populations were evaluated for KB resistance in 2015–16 and 2016–17 cropping seasons at two seeding dates (total four environments) in Cd. Obregon, Mexico. Two stable QTL from each population were identified in each environment: QKb.cim-2B and QKb.cim-3D (Pop1), QKb.cim-3B1 and QKb.cim-5B2 (Pop2). Other than those four QTL, other QTL were detected in each population which were specific to environments: QKb.cim-5B1, QKb.cim-6A, and QKb.cim-7A (Pop1), QKb.cim-3B2, QKb.cim-4A1, QKb.cim-4A2, QKb.cim-4B, QKb.cim-5A1, QKb.cim-5A2, and QKb.cim-7A2 (Pop2). Among the four stable QTL, all but QKb.cim-3B1 were derived from the resistant parent. QKb.cim-2B and QKb.cim-3D in Pop1 and QKb.cim-3B1 and QKb.cim-5B2 in Pop2 explained 5.0–11.4% and 3.3–7.1% phenotypic variance, respectively. A combination of two stable QTL in each population reduced KB infection by 24–33%, respectively. Transgressive resistant segregants lines derived with resistance alleles from both parents in each population were identified. Single nucleotide polymorphism (SNP) markers flanking these QTL regions may be amenable to marker-assisted selection. The best lines from both populations (in agronomy, end-use quality and KB resistance) carrying resistance alleles at all identified loci, may be used for inter-crossing and selection of improved germplasm in future. Markers flanking these QTL may assist in selection of such lines.

The title compound, C20H20N2O2, crystallizes in the P21/c space group with one molecule in the asymmetric unit. It contains an amine with a cyano substituent and hence is classified as a cyanamide. One terminal CH3 group is disordered over two positions with occupancies of 0.874 (9)/0.126 (9).

Genomics and phenomics have promised to revolutionize the field of plant breeding. The integration of these two fields has just begun and is being driven through big data by advances in next-generation sequencing and developments of field-based high-throughput phenotyping (HTP) platforms. Each year the International Maize and Wheat Improvement Center (CIMMYT) evaluates tens-of-thousands of advanced lines for grain yield across multiple environments. To evaluate how CIMMYT may utilize dynamic HTP data for genomic selection (GS), we evaluated 1170 of these advanced lines in two environments, drought (2014, 2015) and heat (2015). A portable phenotyping system called ‘Phenocart’ was used to measure normalized difference vegetation index and canopy temperature simultaneously while tagging each data point with precise GPS coordinates. For genomic profiling, genotyping-by-sequencing (GBS) was used for marker discovery and genotyping. Several GS models were evaluated utilizing the 2254 GBS markers along with over 1.1 million phenotypic observations. The physiological measurements collected by HTP, whether used as a response in multivariate models or as a covariate in univariate models, resulted in a range of 33% below to 7% above the standard univariate model. Continued advances in yield prediction models as well as increasing data generating capabilities for both genomic and phenomic data will make these selection strategies tractable for plant breeders to implement increasing the rate of genetic gain.

More than 50% of undernourished children live in Asia and more than 25% live in Africa. Coupled with an inadequate food supply, mineral deficiencies are widespread in these populations; particularly zinc (Zn) and iron (Fe) deficiencies that lead to retarded growth, adverse effects on both the immune system and an individual's cognitive abilities. Biofortification is one solution aimed at reducing the incidence of these deficiencies. To efficiently breed a biofortified wheat variety, it is important to generate knowledge of the genomic regions associated with grain Zn (GZn) and Fe (GFe) concentration. This allows for the introgression of favorable alleles into elite germplasm. In this study we evaluated two bi-parental populations of 188 recombinant inbred lines (RILs) displaying a significant range of transgressive segregation for GZn and GFe during three crop cycles in CIMMYT, Mexico. Parents of the RILs were derived from Triticum spelta L. and synthetic hexaploid wheat crosses. QTL analysis identified a number of significant QTL with a region denominated as QGZn.cimmyt-7B_1P2 on chromosome 7B explaining the largest (32.7%) proportion of phenotypic variance (PVE) for GZn and leading to an average additive effect of −1.3. The QTL with the largest average additive effect for GFe (−0.161) was found on chromosome 4A (QGFe.cimmyt-4A_P2), with 21.14% of the PVE. The region QGZn.cimmyt-7B_1P2 co-localized closest to the region QGZn.cimmyt-7B_1P1 in a consensus map built from the linkage maps of both populations. Pleiotropic or tightly linked QTL were also found on chromosome 3B, however of minor effects and PVE between 4.3 and 10.9%. Further efforts are required to utilize the QTL information in marker assisted backcrossing schemes for wheat biofortification. A strategy to follow is to intercross the transgressive individuals from both populations and then utilize them as sources in biofortification breeding pipelines.

Growing resistant wheat varieties is a key method of minimizing the extent of yield losses caused by the globally important wheat leaf rust (LR) and stripe rust (YR) diseases. In this study, a population of 186 F8 recombinant inbred lines (RILs) derived from a cross between a synthetic wheat derivative (PI610750) and an adapted common wheat line (cv. “UC1110”) were phenotyped for LR and YR response at both seedling and adult plant stages over multiple seasons. Using a genetic linkage map consisting of single sequence repeats and diversity arrays technology markers, in combination with inclusive composite interval mapping analysis, we detected a new LR adult plant resistance (APR) locus, QLr.cim-2DS, contributed by UC1110. One co-located resistance locus to both rusts, QLr.cim-3DC/QYr.cim-3DC, and the known seedling resistance gene Lr26 were also mapped. QLr.cim-2DS and QLr.cim-3DC showed a marginally significant interaction for LR resistance in the adult plant stage. In addition, two previously reported YR APR loci, QYr.ucw-3BS and Yr48, were found to exhibit stable performances in rust environments in both Mexico and the United States and showed a highly significant interaction in the field. Yr48 was also observed to confer intermediate seedling resistance against Mexican YR races, thus suggesting it should be re-classified as an all-stage resistance gene. We also identified 5 and 2 RILs that possessed all detected YR and LR resistance loci, respectively. With the closely linked molecular markers reported here, these RILs could be used as donors for multiple resistance loci to both rusts in wheat breeding programs.

CIMMYT wheat (Triticum aestivum L.) lines Francolin#1 and Quaiu#3 displayed effective and stable adult plant resistance (APR) to Chinese Blumeria graminis f. sp. tritici isolates in the field. To elucidate their genetic basis of resistance, two recombinant inbred line (RIL) populations of their crosses with Avocet, the susceptible parent, were phenotyped in Zhengzhou and Shangqiu in the 2014–2015 and 2015–2016 cropping seasons. These populations were also genotyped with SSR (simple sequence repeat markers) and DArT (diversity arrays technology) markers. Two common significant quantitative trait loci (QTL) on wheat chromosomes 1BL and 4BL were detected in both populations by joint and individual inclusive composite interval mapping, explaining 20.3–28.7% and 9.6–15.9% of the phenotypic variance in Avocet × Francolin#1 and 4.8–11.5% and 10.8–18.9% in Avocet × Quaiu#3, respectively. Additional QTL were mapped on chromosomes 1DL and 5BL in Avocet × Francolin#1 and on 2DL and 6BS in Avocet × Quaiu#3. Among these, QPm.heau-1DL is probably a novel APR gene contributing 6.1–8.5% of total phenotypic variance. The QTL on 1BL corresponds to the pleiotropic multi-pathogen resistance gene Yr29/Lr46/Pm39, whereas the QTL on 2DL maps to a similar region where stripe rust resistance gene Yr54 is located. The QTL identified can potentially be used for the improvement of powdery mildew and rust resistance in wheat breeding.

The leaf spotting diseases in wheat that include Septoria tritici blotch (STB) caused by , Stagonospora nodorum blotch (SNB) caused by , and tan spot (TS) caused by pose challenges to breeding programs in selecting for resistance. A promising approach that could enable selection prior to phenotyping is genomic selection that uses genome-wide markers to estimate breeding values (BVs) for quantitative traits. To evaluate this approach for seedling and/or adult plant resistance (APR) to STB, SNB, and TS, we compared the predictive ability of least-squares (LS) approach with genomic-enabled prediction models including genomic best linear unbiased predictor (GBLUP), Bayesian ridge regression (BRR), Bayes A (BA), Bayes B (BB), Bayes Cπ (BC), Bayesian least absolute shrinkage and selection operator (BL), and reproducing kernel Hilbert spaces markers (RKHS-M), a pedigree-based model (RKHS-P) and RKHS markers and pedigree (RKHS-MP). We observed that LS gave the lowest prediction accuracies and RKHS-MP, the highest. The genomic-enabled prediction models and RKHS-P gave similar accuracies. The increase in accuracy using genomic prediction models over LS was 48%. The mean genomic prediction accuracies were 0.45 for STB (APR), 0.55 for SNB (seedling), 0.66 for TS (seedling) and 0.48 for TS (APR). We also compared markers from two whole-genome profiling approaches: genotyping by sequencing (GBS) and diversity arrays technology sequencing (DArTseq) for prediction. While, GBS markers performed slightly better than DArTseq, combining markers from the two approaches did not improve accuracies. We conclude that implementing GS in breeding for these diseases would help to achieve higher accuracies and rapid gains from selection.

The single most important decision in plant breeding programs is the selection of appropriate crosses. The ideal cross would provide superior predicted progeny performance and enough diversity to maintain genetic gain. The aim of this study was to compare the best crosses predicted using combinations of mid-parent value and variance prediction accounting for linkage disequilibrium (V) or assuming linkage equilibrium (V). After predicting the mean and the variance of each cross, we selected crosses based on mid-parent value, the top 10% of the progeny, and weighted mean and variance within progenies for grain yield, grain protein content, mixing time, and loaf volume in two applied wheat ( L.) breeding programs: Instituto Nacional de Investigación Agropecuaria (INIA) Uruguay and CIMMYT Mexico. Although the variance of the progeny is important to increase the chances of finding superior individuals from transgressive segregation, we observed that the mid-parent values of the crosses drove the genetic gain but the variance of the progeny had a small impact on genetic gain for grain yield. However, the relative importance of the variance of the progeny was larger for quality traits. Overall, the genomic resources and the statistical models are now available to plant breeders to predict both the performance of breeding lines per se as well as the value of progeny from any potential crosses.

Developing cultivars with improved adaptation to drought and heat stressed environments is a priority for plant breeders. Canopy temperature (CT) is a useful tool for phenotypic selection of tolerant genotypes, as it integrates many physiological responses into a single low-cost measurement. The objective of this study was to determine the ability of CT to predict grain yield within the flow of a wheat breeding program and assess its utility as a tool for indirect selection. CT was measured in both heat and drought stressed field experiments in northwest Mexico on 18 breeding trials totaling 504 spring wheat lines from the International Maize and Wheat Improvement Center (CIMMYT) Irrigated Bread Wheat program. In the heat treatment, CT was significantly correlated with yield (r = −0.26) across all trials, with a maximum coefficient of determination within the individual trials of R2 = 0.36. In the drought treatment, a significant correlation across all trials was only observed when days to heading or plant height was used as a covariate. However, the coefficient of determination within individual trials had a maximum of R2 = 0.54, indicating that genetic background may impact the ability of CT to predict yield. Overall a negative slope in the heat treatment indicated that a cooler canopy provided a yield benefit under stress, and implementing selection strategies for CT may have potential for breeding tolerant genotypes.

Wheat ( L.) cultivars must possess suitable end-use quality for release and consumer acceptability. However, breeding for quality traits is often considered a secondary target relative to yield largely because of amount of seed needed and expense. Without testing and selection, many undesirable materials are advanced, expending additional resources. Here, we develop and validate whole-genome prediction models for end-use quality phenotypes in the CIMMYT bread wheat breeding program. Model accuracy was tested using forward prediction on breeding lines ( = 5520) tested in unbalanced yield trials from 2009 to 2015 at Ciudad Obregon, Sonora, Mexico. Quality parameters included test weight, 1000-kernel weight, hardness, grain and flour protein, flour yield, sodium dodecyl sulfate sedimentation, Mixograph and Alveograph performance, and loaf volume. In general, prediction accuracy substantially increased over time as more data was available to train the model. Reflecting practical implementation of genomic selection (GS) in the breeding program, forward prediction accuracies () for quality parameters were assessed in 2015 and ranged from 0.32 (grain hardness) to 0.62 (mixing time). Increased selection intensity was possible with GS since more entries can be genotyped than phenotyped and expected genetic gain was 1.4 to 2.7 times higher across all traits than phenotypic selection. Given the limitations in measuring many lines for quality, we conclude that GS is a powerful tool to facilitate early generation selection for end-use quality in wheat, leaving larger populations for selection on yield during advanced testing and leading to better gain for both quality and yield in bread wheat breeding programs.

The partial rust resistance genes and have been used extensively in wheat ( L.) improvement, as they confer exceptional durability. Interestingly, the resistance of is associated with the expression of leaf tip necrosis (LTN) and with pseudo-black chaff (PBC). Genome-wide association mapping using CIMMYT’s stem rust resistance screening nursery (SRRSN) wheat lines was done to identify genotyping-by-sequencing (GBS) markers linked to LTN and PBC. Phenotyping for these traits was done in Ithaca, New York (fall 2011); Njoro, Kenya (main and off-seasons, 2012), and Wellington, India (winter, 2013). Using the mixed linear model (MLM), 18 GBS markers were significantly associated with LTN. While some markers were linked to loci where the durable leaf rust resistance genes (7DS), (1BL), and (7BL) were mapped, significant associations were also detected with other loci on 2BL, 5B, 3BS, 4BS, and 7BS. Twelve GBS markers linked to the locus (3BS) and loci on 2DS, 4AL, and 7DS were significantly associated with PBC. This study provides insight into the complex genetic control of LTN and PBC. Further efforts to validate and study these loci might aid in determining the nature of their association with durable resistance.

Quantitative adult plant resistance (APR) to stem rust ( f. sp. ) is an important breeding target in wheat ( L.) and a potential target for genomic selection (GS). To evaluate the relative importance of known APR loci in applying GS, we characterized a set of CIMMYT germplasm at important APR loci and on a genome-wide profile using genotyping-by-sequencing (GBS). Using this germplasm, we describe the genetic architecture and evaluate prediction models for APR using data from the international Ug99 stem rust screening nurseries. Prediction models incorporating markers linked to important APR loci and seedling phenotype scores as fixed effects were evaluated along with the classic prediction models: Multiple linear regression (MLR), Genomic best linear unbiased prediction (G-BLUP), Bayesian Lasso (BL), and Bayes Cπ (BCπ). We found the region to play an important role in APR in this germplasm. A model using linked markers as fixed effects in G-BLUP was more accurate than MLR with linked markers (-value = 0.12), and ordinary G-BLUP (-value = 0.15). Incorporating seedling phenotype information as fixed effects in G-BLUP did not consistently increase accuracy. Overall, levels of prediction accuracy found in this study indicate that GS can be effectively applied to improve stem rust APR in this germplasm, and if genotypes at linked markers are available, modeling these genotypes as fixed effects could lead to better predictions.

Every industry need helps to modify its working style quickly with the improvement of existing technology. New developing technologies improve production speed, reduce industrial process costs, etc. Technical specialists carry out continuous research and development to increase efficiency. A significant advance in 4D printing over 3D Printing is its capacity to alter shape over time because external elements such as pressure, air, heat, water, etc., use controlled impact. 4D Printing has one “D'' instead of 3D Printing, and the fourth aspect is time. Therefore, its capacity to alter shape over time is a significant advancement of 4D printing over 3D printing technologies. It is evident that 4D printing will be of tremendous value to manufacturers regarding features and advances in dentistry. Its applications cover medical modelling, surgical guides manufacture, prosthodontics, dentistry, orthodontics, implantology, and dentistry instruments. This paper is brief about 4D printing and its printing of smart materials through 4D printing. Process workflow and Bio-Oriented 4D printable smart materials for dentistry are presented diagrammatically. Further, the paper identifies and discusses the significant potential of 4D printing for dentistry. 4D printing is an innovative technology that uses the inputs from smart materials, and the 3D printed item becomes another structure via the impact of external energy sources such as temperature, light, or other environmental stimuli. The objective is to integrate technology and design to create self-assembly and programmable material technologies that better design, production, and performance.

Abstract The pursuit of sustainable agriculture has become imperative in addressing global food security challenges while minimizing environmental impacts. Recent innovations in nanotechnology have given rise to a promising solution: nanofertilizers. Research reveals that these nanofertilizers can significantly enhance nutrient use efficiency, reducing environmental consequences, and advancing the cause of cleaner production. With potential increases of up to 30% in nutrient use efficiency and 20% in crop yields compared to traditional fertilizers, nanofertilizers demonstrate the capability to substitute up to 50% of conventional fertilizers, thereby diminishing their ecological footprint. This review paper explores the emerging trends and advancements in the field of nanofertilizers and their potential to revolutionize modern agriculture. We delve into the fundamental concepts of nanofertilizers, including their unique characteristics and controlled-release mechanisms. We analysed the impact of nanofertilizers on crop productivity, quality, and growth through the lens of research findings and case studies. While acknowledging the substantial potential of nanofertilizers, we also address environmental and safety considerations, emphasizing the importance of responsible deployment. In an era prioritizing environmental concerns, nanofertilizers offer a promising solution to meet growing food demands while protecting ecosystems. Graphical Abstract

Background: Peptic ulcer perforation is a serious complication which affects 2–10% of peptic ulcer patients. Peptic ulcer perforation presents with an overall mortality of 10% although various authors had reported incidence between 1.3% and 20%. Being a life-threatening complication of peptic ulcer disease, it needs special attention with prompt resuscitation and appropriate surgical management if morbidity and mortality are to be contained. Aims and Objectives: The aim of the study was to the comparative study of Graham’s omentopexy versus modified Graham’s omentopexy in duodenal perforation. Materials and Methods: This prospective and single-center study was done in Birsa Munda, GMC Shahdol Madhya Pradesh from 2021 to 2023 for 2 years of periods. A total of 160 patients divided into two groups-Graham’s omentopexy 80 cases group “A” and modified Graham’s omentopexy 80 cases group “B.” Results: One hundred and forty-six (91%) were male and 14 (9%) were female with M:F Ratio 10:1. Most of the patients were 20–78 years of age in both groups. Post-operative leakage was 7.5% and 1.25%, respectively. Mortality rate in Group A (3.75%) and in Group B (1.25%). The overall mortality rate was 7.14%. In this study, average hospital stay was 12.4 days in Group A and 9.0 days in Group B. Conclusion: This study showed that modified Graham’s patch repair is as effective as Graham’s patch repair in terms of the mean operative time period, the timing of oral feed allow, and mean hospital stay timing.

This work evaluated an anaerobic sequencing batch membrane bioreactor (AnSBR-MBR) equipped with waste-based ceramic membranes for treating low-strength real drain wastewater. Two feeding regimes, viz. settled feed (Phase 1) and mixed feed (Phase 2) were compared. The biological performance (chemical oxygen demand (COD) and phosphate (PO43-) removal) and filtration performance (total suspended solids (TSS) removal and membrane fouling) were investigated. The reactor characteristics in terms of solids content, sludge settling behaviour, and extracellular polymeric substances (EPS) were also assessed. In Phase 1, the settled feed (with the absence of particulate organic matter) resulted in low volatile suspended solids (VSS; 0.23 ± 0.15 g/L), causing low COD removal (28.38 ± 8.14%). In the mixed feed regime in Phase 2, VSS increased (1.82 ± 0.60 g/L) due to the organic content in the particulate matter, which gave microorganisms additional food, resulting in increased COD removal (47.42 ± 2.81%); this phase was also characterised by lower membrane fouling because of the lower EPS content. Marginally higher TSS removal was obtained as well in Phase 2 (96.72 ± 3.26%) than in Phase 1 (90.48 ± 8.14%). This work demonstrates that AnSBR-MBR performance is superior with mixed drain wastewater containing suspended solids and thus pre-settling is not recommended. HIGHLIGHTS Feeding strategies are important in the anaerobic treatment of dilute drain wastewater.; Mixed wastewater containing organic particulate matter is recommended as an influent.; Mixed wastewater resulted in higher COD removal and lower membrane fouling.; Waste-based ceramic membranes were successfully field tested.;

This study aims to assess the level of sustainability in vegetable-based agrifood production systems in Benin and to propose actions to enhance sustainability, food safety, and year-round production in the vegetable production systems. Semi-structured interviews were conducted with 200 vegetable farmers in contrasting agroecological areas (with areas of extensive production of staples and intensive production of vegetables), using the “Indicateur de Durabilité des Exploitations Agricoles” (IDEA) framework (an on-farm sustainability index). Most of the surveyed vegetable farmers produced a wide range of crops, including leafy vegetables (amaranth, African eggplant, and African basil) and peppers, grown by more than 50% of the farmers. The average scores achieved by the vegetable farms regarding three dimensions of sustainability—ecological, social, and economic—were 35, 41, and 63, respectively, out of a maximum score of 100. All three sustainability dimensions of the vegetable farms were, on average, at a low level and improvements were needed for them to reach an acceptable standard. The vegetable farms located in the south of Benin had, on average, a higher sustainability score than those in the north: around 50% of vegetable farms in the south had a medium score, while the sustainability level of almost 75% of vegetable farms in the north was low. Interventions seeking to improve the sustainability of vegetable farms in Benin should focus on the promotion and adoption of eco-responsible practices that improve on-farm biodiversity, water conservation, and the effective allocation and management of land and labor, to mitigate the environmental impacts of vegetable production.

Virtual Reality (VR) revolutionises education, offering a uniquely immersive and engaging learning experience. It fosters personalised learning, ignites creativity, and enhances understanding through interactive 3D models. These models transport students into a virtual world, facilitating better comprehension and memory retention. VR also addresses crucial educational challenges, such as catering to students with special needs and enabling remote learning. Nevertheless, VR also faces challenges like high initial investment and, hence, has limited adoption in education. Thus, to overcome this challenge, Additive Manufacturing (AM) is identified as an emerging technology that complements VR in education. VR provides a digital model, whereas AM provides 3D physical models, enhancing understanding in students. These technologies reduce paperwork, promote a sustainable environment, and facilitate students to learn from their homes, reducing their travelling requirements. This paper highlights that using these technologies in education contributes to achieving many United Nation's Sustainable Development Goals.This is a review-based research, where a scoping review has been presented, with articles and research papers from the relevant sources collected and analysed to address the well identified research objectives. It also compares traditional and VR-based teaching-learning, provides a broad classification for the different education segments targetable through VR, the economic impact of VR on education, and significant applications and advantages of VR in education. We also propose using AM as a cost-effective enabler for VR in education, facilitating sustainability by achieving many of the SDG goals. Further, limitations and VR's implications in academia are presented to show a way forward.