Search

The work focuses on the characterization of the flowfield over a truncated linear aerospike by combining theoretical grounds, numerical simulations and experimental tests. The experimental investigations are carried out on a test rig designed at Politecnico di Torino for advanced nozzle testing. Fully three-dimensional CFD analyses are performed on the actual geometry of the experimental nozzle model. At low nozzle pressure ratios (nprs) the analysis combines numerical simulations and experimental testing, which are also used for validating the CFD results. At higher nprs, the flowfield characterization is performed only by three-dimensional CFD analyses. In addition to the validation of the numerical method, the edge effects at different nprs have been observed.

Thrust augmentation in rocket engines using secondary injection in the diverging part of a nozzle is an innovative extension of after burners. This technique finds application in single stage to orbit propulsion devices, where the nozzle has to work at varying ambient pressures. Experimental and numerical studies have been conducted with varying cross flow and injection conditions to analyse the performance augmentation in a 2D nozzle. Schlieren images and wall pressure data are obtained from the experiment. Simulations are con-ducted using a HLLC scheme based finite volume solver. A detailed description of flow physics resulting due to the introduction of sonic angled jet into expanding supersonic flow is presented. It is found that the injection angle, pressure and main flow pressure have notable influence in the performance of the nozzle.

Single stage to orbit propulsion devices are being developed as part of low cost access to space endeavors. Sea level operation of high area ratio rocket nozzle used in rocket engines leads to an overexpanded flow condition resulting in high side loads. Secondary injection of propellants in high area ratio nozzle is an attractive option to overcome the inefficiency of operation of such nozzles in sea level conditions in addition to the augmentation of thrust. A numerical study on thrust augmentation in high area ratio nozzle by secondary injection of propellants is presented here. The turbulent compressible reacting flow in rocket nozzle with auxiliary injection is simulated using conservation equations for chemical species based on finite rate chemistry model and compressible Navier-Stokes equations with AUSM+-up upwind scheme based unstuctured finite volume solver. An optimized eight step, six species reduced H2-O2finite chemistry reaction model is used to model the supersonic combustion. The indigenously developed solver has an efficient rescaling algorithm to alleviate the effect of stiffness in conventional explicit algorithm for simultaneous solution of reacting flow. The code is validated using the wall pressure and hydrogen concentration values reported for the similar high area ratio rocket nozzle. Accurate prediction of nozzle performance is possible with present turbulent reacting flow simulation as it take care of all losses in nozzle flow. Extensive computations have been performed for the performance estimation of high area ratio rocket nozzle for various prospective auxiliary injection options.