Search

Though multiplexing meta-holograms remains an attractive approach for realizing optical encoding, existing methods encode information based on the intensity of the holographic images. Here, the authors report vectorial metasurfaces that decouple and encode intensity and polarization information.

In this work, the physical and the electrical properties of vertical GaN Schottky diodes were investigated. Cathodo-luminescence (CL), micro-Raman spectroscopy, SIMS, and current-voltage (I-V) measurements were performed to better understand the effects of physical parameters, for example structural defects and doping level inhomogeneity, on the diode electrical performances. Evidence of dislocations in the diode epilayer was spotted thanks to the CL measurements. Then, using 2D mappings of the E2h and A1 (LO) Raman modes, dislocations and other peculiar structural defects were observed. The I-V measurements of the diodes revealed a significant increase in the leakage current with applied reverse bias up to 200 V. The combination of physical and electrical characterization methods indicated that the electrical leakage in the reverse biased diodes seems more correlated with short range non-uniformities of the effective doping than with strain fluctuation induced by dislocations.

N-doped homo-epitaxial GaN samples grown on freestanding GaN substrates have been investigated by micro-Raman spectroscopy. Quantitative analysis of the E2h and the A1(LO) modes’ behavior has been performed while intentionally increasing the carrier density using silicon doping. We noticed that as the carrier concentration increases up to 1.8 × 1018 cm−3, the E2h mode remains unchanged. On the other hand, when the doping gets higher, the A1(LO) position shifts to a higher frequency range, its width becomes larger, and its intensity drastically diminishes. This change in the A1(LO) behavior is due to its interaction and its coupling with the free negative charge carriers. Furthermore, we calibrated the A1(LO) frequency position shift as a function of the n-carrier concentration. We found out that for low n doping, the change in the A1(LO) position can be considered as a linear variation while in the overall doping range, a sigmoid growth trend with a Boltzmann fit can be tentatively applied to describe the A1(LO) position shift. This calibration curve can also be used to describe the coupling strength between the carriers and the A1(LO) phonon. Eventually, this study shows that micro-Raman spectroscopy is a powerful non-destructive tool to probe the doping concentration and the crystalline quality of GaN material with a microscopic spatial resolution.

Controlling light with planar elements requires full polarization channels and reconstruction of optical signals. Here, the authors have demonstrated a general method relying on pixelated metasurfaces that enables wavefront shaping with arbitrary output polarization, allowing full utilization of polarization channels.

We report the possibility to control the tilting of nanoneedles and nanowires by using structured sapphire substrates. The advantage of the reported strategy is to obtain well oriented growth along a single direction tilted with respect to the surface normal, whereas the growth in other directions is suppressed. In our particular case, the nanostructures are tilted with respect to the surface normal by an angle of 58°. Moreover, we demonstrate that variation of the nanostructures shape from nanoneedles to cylindrical nanowires by using SiO2 layer is observed.