Search

Abstract Photocatalytic CO2 reduction is considered as a promising strategy for CO2 utilization and producing renewable energy, however, it remains challenge in the improvement of photocatalytic performance for wide‐band‐gap photocatalyst with controllable product selectivity. Herein, the sulfur‐doped In(OH)3 (In(OH)xSy‐z) nanocubes are developed for selective photocatalytic reduction of CO2 to CH4 under simulated light irradiation. The CH4 yield of the optimal In(OH)xSy‐1.0 can be enhanced up to 39 times and the CH4 selectivity can be regulated as high as 80.75% compared to that of pristine In(OH)3. The substitution of sulfur atoms for hydroxyl groups in In(OH)3 enhances the visible light absorption capability, and further improves the hydrophilicity behavior, which promotes the H2O dissociation into protons (H*) and accelerates the dynamic proton‐feeding CO2 hydrogenation. In situ DRIFTs and DFT calculation confirm that the non‐metal sulfur sites significantly weaken the over‐potential of the H2O oxidation and prevent the formation of ·OH radicals, enabling the stabilization of *CHO intermediates and thus facilitating CH4 production. This work highlights the promotion effect of the non‐metal doping engineering on wide‐band‐gap photocatalysts for tailoring the product selectivity in photocatalytic CO2 reduction.

TiO2 semiconductor plays a paramount important as an active photocatalyst mainly due to its photo-induced electron transfer properties. The metastable anatase in particular are widely accepted to have the most photoactive activity in catalytic application as opposed to rutile TiO2. This is majorly due to the significantly lower recombination rate of electron pair possesses by anatase TiO2. Unfortunately, high recombination rate in anatase TiO2 hinders its application as a functional photocatalyst. Therefore, it is crucial to further enhance the photocatalytic activity of anatase TiO2, by modifying its optical properties, morphological properties, and crystal facet. The study aims to provide a benign synthesis method for TiO2 with a co-exposed {001}/{100} anatase TiO2 facet. The synthesis was conducted via one-pot reflux condensation method. A concise evaluation upon the effect of different synthesis heating duration, temperature and doping materials towards the crystal phase, morphology, and photocatalytic performance of TiO2 were conducted. Anatase TiO2 with high percentage of the high-energy {001} facet have the ability to boost the adsorption and photocatalytic performance as opposed to anatase TiO2 dominated with a thermodynamically stable {101} facet. The incorporation of non-metal dopant (HF) acts as surface modifier which leads to the enhancement of {001} facet percentage. This study further evaluates the functionalities of HCl in paving way towards the formation of mid-gap state, hence improving Anatase TiO2 optical properties. The reduction of band gap of the anatase TiO2 can clearly be identified from the shifts in the adsorption band towards higher wavelength. From the findings, it was found that the synergistic effect upon co-doping anatase TiO2 with the two non-metal dopants plays an important role in altering the ratio of exposed facet hence leading towards improving the photocatalytic efficiency of the nanomaterial. To evaluate the photocatalytic performance of the synthesized TiO2, Remazol Brilliant Blue (0.01 g/L) was chosen as the target pollutant. The enhanced photodegradation of co-doped F/Cl-TiO2 was evaluated and it was found that 87.21% and 43.21% of Remazol Brilliant Blue had successfully been degraded within 120 min with irradiation of broad spectrum and blue light (475 nm) respectively. This is mainly attributed to the co-exposed {001}/{100} anatase TiO2 facet presence in the F/Cl-TiO2 sample.

Abstract Zinc-Imidazole coordination polymer (ZnImCP) was simply synthesized hydrothermally at relatively low temperature (70 °C) from zinc acetate and imidazole. ZnImCP was treated by sulfide solution to produce sulfur-doped samples (S-ZnImCPs). Structures of the synthesized ZnImCP and S-ZnImCPs were characterized through FTIR, PXRD, and, Raman, SEM/EDX, N2-BET, UV–VIS DRS, and pHpzc analyses. The photocatalytic performances of pristine CP and sulfur modified CPs under visible and ultra-violet irradiations for degrading the cationic methylene blue (MB) and the anionic methyl orange (MO) were investigated considering different initial pH values 4, 7 and 10. Under visible light, the results indicate that these CPs display considerable photocatalytic degradation towards the cationic MB for the initial pH 4 and 7 where degradation increases with sulfur content. While under ultra-violet, results indicate considerable photocatalytic degradation towards both dyes for the initial pH 7 and 10 where degradation increases with sulfur content which indicates the gainful of non-metal dopping. The buffering nature of CPs and the type of radiation considering determined band-gap values effectively influence the degradation mechanisms.

Searching for low-cost and highly-efficient oxygen reduction reaction (ORR) catalysts is crucial to the large-scale application of fuel cells. Herein, by means of density functional theory (DFT) computations, we proposed a new class of ORR catalysts by doping the CrS2 monolayer with non-metal atoms (X@CrS2, X = B, C, N, O, Si, P, Cl, As, Se, and Br). Our results revealed that most of the X@CrS2 candidates exhibit negative formation energy and large binding energy, thus ensuring their high stability and offering great promise for experimental synthesis. Moreover, based on the computed free energy profiles, we predicted that N@CrS2 exhibits the best ORR catalytic activity among all considered candidates due to its lowest overpotential (0.41 V), which is even lower than that of the state-of-the-art Pt catalyst (0.45 V). Remarkably, the excellent catalytic performance of N@CrS2 for ORR can be ascribed to its optimal binding strength with the oxygenated intermediates, according to the computed linear scaling relationships and volcano plot, which can be well verified by the analysis of the p-band center as well as the charge transfer between oxygenated species and catalysts. Therefore, by carefully modulating the incorporated non-metal dopants, the CrS2 monolayer can be utilized as a promising ORR catalyst, which may offer a new strategy to further develop eligible electrocatalysts in fuel cells.

Mesoporous titania (mp-TiO2) has drawn tremendous attention for a diverse set of applications due to its high surface area, interfacial structure, and tunable combination of pore size, pore orientation, wall thickness, and pore connectivity. Its pore structure facilitates rapid diffusion of reactants and charge carriers to the photocatalytically active interface of TiO2. However, because the large band gap of TiO2 limits its ability to utilize visible light, non-metal doping has been extensively studied to tune the energy levels of TiO2. While first-principles calculations support the efficacy of this approach, it is challenging to efficiently introduce active non-metal dopants into the lattice of TiO2. This review surveys recent advances in the preparation of mp-TiO2 and their doping with non-metal atoms. Different doping strategies and dopant sources are discussed. Further, co-doping with combinations of non-metal dopants are discussed as strategies to reduce the band gap, improve photogenerated charge separation, and enhance visible light absorption. The improvements resulting from each doping strategy are discussed in light of potential changes in mesoporous architecture, dopant composition and chemical state, extent of band gap reduction, and improvement in photocatalytic activities. Finally, potential applications of non-metal-doped mp-TiO2 are explored in water splitting, CO2 reduction, and environmental remediation with visible light.