Search

The choice of the optimal orientation of the solar panels is by far one of the most important issues in the practical application of solar installations. The use of phase changing materials (PCMs) is an efficient approach of storing solar thermal energy. Because PCMs are isothermal in nature, they provide better density energy storage and the capacity to function across a wide temperature range. Unfortunately, this feature is very rare on various solar power panels; however, ignoring it can reduce the performance of the panels to unacceptable levels. The fact is that the angle of incidence of rays on the surface greatly affects the reflection coefficient and, consequently, the role of unacceptable solar energy. In this paper, a smart energy harvesting model was proposed. In the case of glass, when the angle of incidence varies vertically from its surface to 30, the reflection coefficient is practically unchanged and slightly less than 5%, i.e., more than 95% of the radiation goes inwards. Furthermore, the reflection increase is noticeable, and the area of the reflected radiation by 60 doubles to almost 10%. At an angle of incidence of 70, it reflects 20% of the radiation, and at 80, 40%. For most other objects, the dependence of the reflection magnitude on the angle of incidence is approximately the same.

The contemporary concern in worldwide power scenario and consumption rate is frightening significantly at a marvelous amount of population, and it originates a very high augment in the electrical energy area. The all-embracing attraction and manufacture of fossil energy is the chief reason in the ecological issues. Due to these relic fuels, the ecological resources get exhausted, and it results in climatic change. Due to these negative aspects, every country puts effort to bring the energy efficiency high with the help of renewable energy. Presently, the solar energy donation worldwide decreases. Contrarily, solar energy contribution to the global energy is highly contrary to nonconventional energy resources. But there is a progress in power generation, and it plays a vital role in solar photovoltaic generation. Gallium nitride and silicon carbide power semiconductors will emerge to bring the efficiency high in the photovoltaic technology. In this work, we will converse about how to increase the efficiency by using gallium nitride.

Currently, electric cars are receiving a lot of attention because of their low fuel consumption and pollution-free nature. The efficiency of electric vehicles is constantly being improved via a variety of studies and applications. The battery is a significant portion of an electric vehicle’s overall component count. Because the electric vehicle’s battery acts like the vehicle’s heart, battery performance and efficiency in electric vehicles (EVs) are examined in this research.

In this paper, functions of BMS in elections vehicles are explained. The BMS consists of number of electronics components for monitoring and controlling the functions of batteries in electrical vehicles (EVs). Nowadays, the EV has more concentrations because it has number of merits like compact in size, does not require fossil fuel so it is environment friendly, and cost-saving. The main components in EV are batteries because batteries decide the performance and efficiency of EV. So, we should give more importance to batteries. Battery is controlled and monitored with the help of BMS. The BMS protects the battery and increases life time and efficiency due to charging discharging process.

Lack of communication causes problems for patients with neurodegenerative diseases, so the need for alternative methods is required to convey their thoughts with caretakers, friends, and family members. Brain-computer interface (BCI) is a device to control external devices by using mental thoughts without any other muscle movements to improve the communication quality for the disabled individual without any other help. The techniques of measuring electrical signal around the scalp during some activities by using electrodes are called electroencephalogram (EEG). By combining these two technologies together to form a brain-computer interaction, this helps the paralyzed individual to communicate with others to share the thoughts. In this paper, we deal with the history of EEG, electrode placements with measurements, and signal ranges, and also further discussed some of the prominent studies completed in designing BCI using EEG. This helps the new researchers to know the EEG measurement and position completely and paved the new way to create EEG-based interface research.

The aim of this paper is to investigate the design computation and prototype model implementation of a Modified Mechanical Structure (MMS) Electric Bike (E-Bike). It is the technology that allows the vehicle to operate with the assistance of electrical energy. All conventional cars will be converted to electric vehicles (EVs) in the future. EVs will be affordable to all types of people, allowing them to fly comfortably and safely. As a result, this paper proposes a design estimate and model implementation of the MMS E-Bike with the smallest number of parts, lowest expense, and lightest weight possible. The most important parts of the designed MMS E-Bike are the battery, MMS, BLDC motor, and electronic commutator with their controller. Because of its adapted mechanical frame nature, the designed E-Bike is low in cost and weight, and it can also go up to 25 kmph. Furthermore, the rider will be able to ride the built MMS E-Bike without any pain to their bodies and should be able to sit comfortably during their journey. In comparison to the Ampere Angel and DMW Electra 20 E-Bikes, the performance of the developed model is tested under various operating conditions, as well as their battery backup.