Search

One of the options currently taken into account for the realization of the first DEMO reactor is the “water-cooled lanket”. This option implies an irradiation temperature for the blanket material in the range of 280–350 °C. Therefore, in light of the under irradiation behaviour of EUROFER, namely of the DBTT shift toward high temperature due to the low irradiation temperature embrittlement, the target of the hereby reported activities is the development of much tougher alloys, to try to tolerate the embrittlement due to the low irradiation temperature. We report in this paper the work done to optimize the toughness of Eurofer 97, increasing the normalizing temperature and maintaining a small grain size using multiple normalizing treatments. We report also the mechanical behaviour of two 9Cr1WTa type alloys, produced and tested with the same aim to find alloys more resistant to embrittlement at low irradiation temperature. Keywords: EUROFER 97, RAFM steels, Microstructure, Heat treatment, Tensile, Charpy, KLST

The contribution of ENEA together with Rina-CSM to the Eurofusion programme “WPMAT-Advanced Seels” deals with the development of innovative RAFM steels able to withstand the critical temperatures typical of the different operational environments foreseen for the blanket of the first DEMO reactor. The optimization of the chemical composition and the Thermo Mechanical Treatment for these materials should be done according to the blanket operating temperatures that are related to two possible working conditions: the WCLL-BB (Water Cooled Lead Lithium Breeding Blanket) or the H(D)CLL-BB (Helium (Dual) Cooled Lead Lithium Breeding Blanket). On the one hand the “water-cooling” option implies a minimum irradiation temperature for the blanket material in the range of 280–350 °C. On the other hand, the “helium-cooled” and the “dual-coolant” solutions imply an operating temperature for the blanket material in the range of 650 °C. Therefore in the first case the target is the improvement of the toughness of the martensitic alloys; whilst concerning the second scenario the target is the development of more creep resistant martensitic steels, suitable to tolerate such a high operating temperature. In both the cases the Tungsten content plays a key role, both in terms of solid solution hardening and influence on the DBTT. Two alloys aimed at fulfilling the specifications for the two DEMO operating conditions, both with increased Tungsten content respect to Eurofer, have been produced and characterized. The mechanical properties of these two alloys are hereby reported and discussed.

Among the options currently taken into account for the realization of the first DEMO reactor there are the “helium-cooled” and the “dual coolant” breeding blanket. Therefore the high temperature (650 °C) behavior of the proposed innovative martensitic alloys should be improved, namely the frame of the hereby reported activities is the development of martensitic alloys more resistant to creep, suitable to tolerate such a high operating temperature. In order to improve the high temperature mechanical properties, concerning the alloy design strategies, two alternative routes are proposed; the effect of Nitrogen and Tungsten increase are taken into account as well as the addition of carbo-nitride forming elements, like Vanadium, combined with the “ausforming” thermo-mechanical treatments. Two alloys have been designed and a special thermo-mechanical treatment on Eurofer 97-2 is proposed. The “ausforming” treatment, consisting in a sort of hot-working at a lower temperature with respect to the austenitization one after the austenitization stage, is aimed at the achievement of a beneficial dislocation “pinning” at high temperature due to carbide precipitation. Generally the improvement of tensile properties is associated to the hardening of the steel due to dislocation network and precipitation effects. This hardening is accompanied by a DBTT increase to markedly higher values with respect to Standard Eurofer. The proposed materials should be, in any case, at least room temperature ductile in order to undergo safe manufacturing and assembling processes. Therefore the issue of the DBTT increase has been taken into account by tuning the tempering temperature adequately. The two variations from chemical composition of Eurofer 97 have been casted and the thermo-mechanical treatments have been selected by means of SEM and hardness measurements to tune grain size and precipitation of carbides. The outcomes of the preliminary mechanical characterization (tensile, creep and impact tests) will be discussed in this paper. Keywords: EUROFER 97, RAFM steels, Thermo-mechanical treatment, Ausforming, Tensile, Creep, Charpy