Search

Insulating Liquids are widely used for their electrical and thermal properties in power apparatuses, particularly at the level of liquid-filled transformers. With the shift in engineering aspects towards sustainable development, it is important to find a sustainable solution with ecofriendly nature. Therefore, alternative (biodegradable) liquids are of high importance in the global transformer communities. In the present study, the alternative dielectric fluids (ester-based) feasibility for potential regeneration with Fuller’s earth is investigated. The experimental results are confined to the reclamation temperature as well as the ratio of Fuller's earth (the sorbent) and the liquid. A suitable laboratory treatment apparatus is designed and is adopted in this study. Promising measurements to comment on the effectiveness of the treatment have been performed at controlled treatment temperature and sorbent-liquid ratio with the ASTM 7150-13 as a reference norm.The results of this study allowed 80°C and 1 g/30 ml as affirmative conditions for the present experimental conditions. Diagnostic measurements include turbidity, particle counter, and UV spectrophotometry before and after treatments. It is inferred that fuller’s earth is not a promising sorbent for the reclamation of ester liquids.

Among the main causes of outdoor insulation failures is their poor specifications in terms of leakage distances. This happens when the selected criteria are unable to cope with all the stresses imposed by the changes in environmental pollutions. Therefore, it is important for utilities to fully understand the actual pollution characteristics of the service environment in which the insulators are operating. In this paper, the pollution severity and performance of some 13.2 kV ceramic insulators, sampled in different areas of a Canadian aluminum factory, are assessed. The investigations were performed taking into account the influence of air humidity. Various characteristics were investigated to assess the pollution levels of the insulators, such as equivalent salt deposit density (ESDD) and non-soluble deposit density (NSDD), surface resistance, and leakage current characteristics (density, 3rd harmonic amplitude, and phase). It was witnessed that the insulators, collected around the factory, were much more polluted in comparison to the initial expectation. The pollution level should not be considered static due to the environmental parameters’ dynamics. Lessons to learn: the reliability of an electrical grid is dependent on components whose own reliability is strongly affected by external factors, of which there is often a poor awareness. If care is not taken to re-evaluate the post-installation pollution levels of the insulators, the light may simply turn out!