Search

Stavsky et al. examined the effects of deleting the mitochondrial sodium/lithium/calcium exchanger, NCLX, on mitochondrial and synaptic calcium homeostasis, synaptic activity, and plasticity in mice. Having identified a human mutation that impairs NCLX activity and is associated with mental retardation, they show that NCLX is crucial for defining synaptic strength and plasticity, which are pivotal elements of learning and memory.

Lactate is a major metabolite largely produced by astrocytes that nourishes neurons. ASIC1a, a Na+ and Ca2+-permeable channel with an extracellular proton sensing domain, is thought to be activated by lactate through chelation of divalent cations, including Ca2+, Mg2+ and Zn2+, that block the channel pore. Here, by monitoring lactate-evoked H+ and Ca2+ transport in cultured mouse cortical and hippocampal neurons, we find that stereo-selective neuronal uptake of L-lactate results in rapid intracellular acidification that triggers H+ extrusion to activate plasma membrane ASIC1a channels, leading to propagating Ca2+ waves into the cytosol and mitochondria. We show that lactate activates ASIC1a at its physiological concentrations, far below that needed to chelate divalent cations. The L-isomer of lactate exerts a much greater effect on ASIC1a-mediated activity than the d-isomer and this stereo-selectivity arises from lactate transporters, which prefer the physiologically common L-lactate. The lactate uptake in turn results in intracellular acidification, which is then followed by a robust acid extrusion. The latter response sufficiently lowers the pH in the vicinity of the extracellular domain of ASIC1a to trigger its activation, resulting in cytosolic and mitochondrial Ca2+ signals that accelerate mitochondrial respiration. Furthermore, blocking ASIC1a led to a robust mitochondrial ROS production induced by L-lactate. Together our results indicate that ASIC1a is a metabolic sensor, which by sensing extracellular pH drop triggered by neuronal lactate uptake with subsequent proton extrusion, transmits a Ca2+ response that is propagated to mitochondria to enhance lactate catabolism and suppress ROS production.

Background Connexins are transmembrane proteins forming gap junctions between the cells, which allow intercellular communication. Significance of gap junctions and connexins in lung carcinoma is not yet understood. The objective of the study was to investigate immunohistochemical expression and the localization of connexin-43 (Cx43) in primary lung carcinoma and its lymphatic metastases. Methods Surgical specimens of excised tumors from 88 patients (45 men and 43 women, 61.9 ± 7.4 years) with lung carcinoma (52 adenocarcinoma (AC), 36 squamous cell carcinoma (SqCC)) who were operated on at the University Hospital “Bezanijska Kosa” in a five-year period (2012–2016) were used. We conducted immunohistochemical staining for Cx43 and measured the degree of expression (percentage of positive cells and staining intensity) as well as localization of Cx43 in primary tumor and in lymphatic metastases. Results Immunohistochemical analysis of the primary tumors revealed that SqCC showed significantly higher percentage of tumor cells expressing Cx43 as well as higher staining intensity than AC (p

Cultured meat (also referred to as cultivated meat or cell-based meat)—CM—is fabricated through the process of cellular agriculture (CA), which entails application of bioengineering, i.e., tissue engineering (TE) principles to the production of food. The main TE principles include usage of cells, grown in a controlled environment provided by bioreactors and cultivation media supplemented with growth factors and other needed nutrients and signaling molecules, and seeded onto the immobilization elements—microcarriers and scaffolds that provide the adhesion surfaces necessary for anchor-dependent cells and offer 3D organization for multiple cell types. Theoretically, many solutions from regenerative medicine and biomedical engineering can be applied in CM-TE, i.e., CA. However, in practice, there are a number of specificities regarding fabrication of a CM product that needs to fulfill not only the majority of functional criteria of muscle and fat TE, but also has to possess the sensory and nutritional qualities of a traditional food component, i.e., the meat it aims to replace. This is the reason that bioengineering aimed at CM production needs to be regarded as a specific scientific discipline of a multidisciplinary nature, integrating principles from biomedical engineering as well as from food manufacturing, design and development, i.e., food engineering. An important requirement is also the need to use as little as possible of animal-derived components in the whole CM bioprocess. In this review, we aim to present the current knowledge on different bioengineering aspects, pertinent to different current scientific disciplines but all relevant for CM engineering, relevant for muscle TE, including different cell sources, bioreactor types, media requirements, bioprocess monitoring and kinetics and their modifications for use in CA, all in view of their potential for efficient CM bioprocess scale-up. We believe such a review will offer a good overview of different bioengineering strategies for CM production and will be useful to a range of interested stakeholders, from students just entering the CA field to experienced researchers looking for the latest innovations in the field.

Cardiac involvement in drug reaction with eosinophilia and systemic symptoms (DS) is rare but associated with high mortality. The aim of this research was to systematically review case reports by PRISMA guidelines in order to synthetize the knowledge of cardiac manifestations of DS. We identified 42 cases from 36 case reports. Women were two times more affected than men. Two-thirds of patients had cardiac manifestation in the initial phase of the disease, while in one-third of cases cardiac manifestations developed later (mean time of 70 ± 63 days). The most common inciting medications were minocycline (19%) and allopurinol (12%). In 17% of patients, the heart was the only internal organ affected, while the majority (83%) had at least one additional organ involved, most commonly the liver and the kidneys. Dyspnea (55%), cardiogenic shock (43%), chest pain (38%), and tachycardia (33%) were the most common cardiac signs and symptoms reported. Patients frequently had an abnormal ECG (71.4%), and a decrease in left ventricular ejection fraction was the most common echocardiographic finding (45%). Endomyocardial biopsy or histological examination at autopsy was performed in 52.4%, with the predominant finding being fulminant eosinophilic myocarditis with acute necrosis in 70% of those biopsied. All patients received immunosuppressive therapy with intravenous steroids, while non-responders were more likely to have received IVIG, cyclosporine, mycophenolate, and other steroid-sparing agents (60%). Gender and degree of left ventricular systolic dysfunction were not associated with outcomes, but short latency between drug exposure and the first DRESS symptom onset (

Introduction: Lung cancer is among leading causes of death worldwide. Different histological types of the lung carcinoma show significant differences in behavior. Objectives: The aim of this study is to determine the distribution patterns of metastases of different lung cancer histological types in autopsied individuals. Methods: Protocols from all autopsies performed at the Institute of Pathology from 2008 till 2014 were reviewed retrospectively, and information on individuals' age, sex, histological type of primary lung cancer, presence and location of metastases, and causes of death were recorded. Results: More than 90% of the individuals with lung cancer metastases were older than 50 years (mean age: 64.5 ± 10.3), with two-fold male predominance. The most frequent histological type in both sexes was adenocarcinoma (48%). Although, in general, hematogenous metastases were mostly found in the liver and adrenal glands, various histological types of lung cancer show specific dissemination patterns. Metastases in adrenal glands derived mostly from adenocarcinoma and large-cell carcinoma. Metastases in the intestines most frequently originated from large-cell carcinoma (P = 0.01). Metastatic complications and bronchopneumonia were the most frequent causes of death. Conclusions: While, overall, the most frequent hematogenous metastases occur in the liver and adrenal glands, various histological types of lung cancer show specific dissemination patterns. Knowing distribution of metastases is essential for making algorithms of treatment, as well as for improving clinical assessment of the patients with unclear clinical findings and suspicion on occult primary lung cancer.

BACKGROUND: Miliary tuberculosis (TB) usually presents with atypical clinical manifestations; thus it is often recognized only at autopsy. OBJECTIVES: Our objectives were to study the frequency of MT diagnosed at autopsy and determine clinical diagnoses that masked TB, as well as causes of death and comorbidities. DESIGN: Retrospective study of all autopsies performed between 2008 and 2014. SETTING: Institute of Pathology, Belgrade, Serbia. SUBJECTS AND METHODS: In subjects where autopsy showed the presence of MT that was not recognized clinically, we recorded the clinical diagnoses (presumed causes of death) as reported in autopsy request forms, as well as actual cause of death and comorbidities as determined at autopsy. MAIN OUTCOME MEASURES: Clinically unrecognized MT. RESULTS: The total number of autopsies in this period was 6206. Thirty-five individuals showed clinically unrecognized MT (0.56% of all autopsies, age: 62.2 [17.2] years, M:F=2:3). Common clinical diagnoses masking pulmonary MT were exacerbation of COPD (25%) and pulmonary thromboembolism (25%), with common radiological presentation of diffuse pulmonary infiltrates (56.3%). Dominant clinical diagnoses in patients with generalized MT were adult respiratory distress syndrome, sepsis, gastrointestinal bleeding and meningoencephalitis. Disseminated MT was often associated with secondary anemia or thrombocytopenia (15.8%) and recent surgery (15.8%). Frequent comorbidities included chronic renal failure and malignancies, whereas MT was a dominant cause of death. CONCLUSION: Greater awareness of MT is needed to improve recognition in clinical settings. In particular, MT should be considered in patients with atypical clinical presentation and diffuse pulmonary infiltrates on chest X-ray, particularly if they have chronic renal failure, malignancy, hematological disorders or a history of recent surgery. LIMITATIONS: None.

Storage of a great amount of plum kernel waste becomes a challenge for food industry. In this work, the plum seed was used as a source of fixed oil that can be an ingredient of commercial products. Soxhlet extraction was carried out using the different solvents, such as n-hexane, n-heptane, ethyl acetate, acetone, or chloroform:methanol mixture (2:1 v/v). The highest yield of oil (about 30%) was obtained using n-heptane and n-hexane, while the lowest yield was obtained using ethyl acetate. The analysis of physico-chemical parameters indicated that all samples of plum seed oil have an exceptional quality. Schaal oven test indicated that the fixed oil of plum seed exhibited satisfactory oxidative stability at moderate storage temperatures (up to 65 °C). The composition of phenolic compounds in the oil samples was determined using HPLC method. The most abundant compound of seven identified and quantified phenolic compounds was vanillic acid. The highest content of β-carotene (1.67 mg 100 g−1 fixed oil) spectrophotometrically determined was in the oil extracted with n-hexane. The lowest content of β-carotene (1.26 mg 100 g−1 fixed oil) was determined in the oil extracted with a mixture of chloroform:methanol (2:1 v/v). This oil had the highest antioxidant activity (IC50 value of 4.35 mg mL−1) compared to other oil samples. The antioxidant activity was probably caused by the presence of phenolic compounds. The investigated physico-chemical properties demonstrated that the plum seed oil has a potential for application in the food, cosmetics, and pharmaceutical industry.

The aim of this study was to optimize the ultrasound-assisted extraction of phenolic compounds from black locust (Robiniae pseudoacaciae) flowers using central composite design. The ethanol concentration (33−67%), extraction temperature (33−67 °C), and extraction time (17−33 min) were analyzed as the factors that impact the total phenolic content. The liquid-to-solid ratio of 10 cm3 g−1 was the same during extractions. The optimal conditions were found to be 59 °C, 60% (v/v) ethanol, and extraction time of 30 min. The total phenolic content (TPC = 3.12 gGAE 100 g−1 dry plant material) and antioxidant activity (IC50 = 120.5 µg cm−3) of the extract obtained by ultrasound-assisted extraction were compared with those obtained by maceration (TPC = 2.54 gGAE 100 g−1 dry plant material, IC50 = 150.6 µg cm−3) and Soxhlet extraction (TPC = 3.22 gGAE 100 g−1 dry plant material, IC50 = 204.2 µg cm−3). The ultrasound-assisted extraction gave higher total phenolic content and better antioxidant activity for shorter extraction time so that it represents the technique of choice for the extraction of phenolic compounds. The obtained extract, as the source of antioxidants, can be applied in the pharmaceutical and food industries.

The packaging materials industry has already recognized the importance of Total Productive Maintenance as a system of proactive techniques for improving equipment reliability. Bearing faults, which often occur gradually, represent one of the foremost causes of failures in the industry. Therefore, detection of their faults in an early stage is quite important to assure reliable and efficient operation. We present a new automated technique for early fault detection and diagnosis in rolling-element bearings based on vibration signal analysis. Following the wavelet decomposition of vibration signals into a few sub-bands of interest, the standard deviation of obtained wavelet coefficients is extracted as a representative feature. Then, the feature space dimension is optimally reduced to two using scatter matrices. In the reduced two-dimensional feature space the fault detection and diagnosis is carried out by quadratic classifiers. Accuracy of the technique has been tested on four classes of the recorded vibrations signals, i.e., normal, with the fault of inner race, outer race, and ball operation. The overall accuracy of 98.9% has been achieved. The new technique can be used to support maintenance decision-making processes and, thus, to increase reliability and efficiency in the industry by preventing unexpected faulty operation of bearings.

The aim of this study was to assess the quality of mandibular bone using CBCT images in archeological populations that inhabited Croatia from the medieval to the Early Modern Period. A total of 88 human skulls (45 male and 43 female) from three samples (pre-Ottoman (N = 27), Ottoman (N = 32), and Vlach (N = 29)) were analyzed by using CBCT. The mental index, gonion index, antegonion index, panoramic mandibular index, degree of resorption of the alveolar ridge, and cortical index of the mandible were evaluated using the OnDemand3DApp. The results showed an expected higher value of cortex thickness in males when compared to females. Females in the younger groups had higher values of cortical thickness than those in the older age group. The Ottoman sample had significantly lower values of mandibular indices than the other two samples. There were no age-related differences in bone thickness in males, suggesting that hormonal changes have a stronger influence in females. Lower values of mandibular indices in the Ottoman sample may be an indicator of specific factors that influenced this population. Our study of bone changes in archeological populations with different living conditions may contribute to a better understanding of impact of biocultural factors on physiological and pathological processes, which are extremely complex in bone tissue.

Introduction: Artificial intelligence has been applied in various fields throughout history, but its integration into daily life is more recent. The first applications of AI were primarily in academia and government research institutions, but as technology has advanced, AI has also been applied in industry, commerce, medicine and dentistry. Objective: Considering that the possibilities of applying artificial intelligence are developing rapidly and that this field is one of the areas with the greatest increase in the number of newly published articles, the aim of this paper was to provide an overview of the literature and to give an insight into the possibilities of applying artificial intelligence in medicine and dentistry. In addition, the aim was to discuss its advantages and disadvantages. Conclusion:The possibilities of applying artificial intelligence to medicine and dentistry are just being discovered. Artificial intelligence will greatly contribute to developments in medicine and dentistry, as it is a tool that enables development and progress, especially in terms of personalized healthcare that will lead to much better treatment outcomes.

Objectives: The study aimed to determine the relationship between the mandibular asymmetry index according to Kjellberg between patients with painful unilateral anterior disc displacement (DD) and asymptomatic volunteers without disc displacement. Vertical measurements were performed on a panoramic single-image radiograph, and the disc status was confirmed by magnetic resonance imaging (MRI). Material and methods: Two groups of subjects were retrospectively selected, 40 patients (the overall mean age was 35.5 years; 75% female) with temporomandibular disorder symptoms confirmed by RDC/TMD axis I and manual functional analysis. Unilateral DD was determined by MRI. A comparative group of asymptomatic volunteers (20 dental students with a mean age of 23.4 years; 72% female) had the physiological position of the disc determined by MRI. The vertical asymmetry of the condyle was determined by the method of Kjellberg et al. The symmetry of the gonial angle of the mandible was also measured. Results: A comparison of the mean of the asymmetry index between patients (average 90.89±7.08%) and asymptomatic volunteers (mean 95.86±4.44%) showed a statistically significant difference (p=0.0029). There was no difference (p=0.088) in gonial angle symmetry between the patients (mean 96.48±2.96°) and the asymptomatic volunteers (mean 97.52±2.31°). The distribution of the presence of individual DD diagnoses (partial and total displacement with reduction, displacement without reduction) in patients diagnosed with asymmetry of the mandible was without statistical significance (p>0.05). Conclusion: This study actually points to the asymmetry of the mandible as a potential morphological risk of anterior DD.

Quantifying electron-phonon interactions for the surface states of topological materials can provide key insights into surface-state transport, topological superconductivity, and potentially how to manipulate the surface state using a structural degree of freedom. We perform time-resolved x-ray diffraction (XRD) and angle-resolved photoemission (ARPES) measurements on Bi_{2}Te_{3} and Bi_{2}Se_{3}, following the excitation of coherent A_{1g} optical phonons. We extract and compare the deformation potentials coupling the surface electronic states to local A_{1g}-like displacements in these two materials using the experimentally determined atomic displacements from XRD and electron band shifts from ARPES. We find the coupling in Bi_{2}Te_{3} and Bi_{2}Se_{3} to be similar and in general in agreement with expectations from density functional theory. We establish a methodology that quantifies the mode-specific electron-phonon coupling experimentally, allowing detailed comparison to theory. Our results shed light on fundamental processes in topological insulators involving electron-phonon coupling.

The purpose of the study was to find differences in the parameters of the response to the blink reflex (BR) between patients with idiopathic trigeminal neuralgia (TN) and health volunteers. A prospective cohort study was conducted over 2 years. The TN-subgroup included 15 patients (mean age / SD 62.3 ± 10.7 years). Pain-free and healthy volunteers as a HV-subgroup (mean age / SD: 30.8 ± 8.1 years) were recruited from asymptomatic students of dental medicine. Diagnostic parameters were determined by measuring latency to the onset of the BR components from electric stimulation. The following branches of the trigeminal nerve were affected: maxillary branch only (26.7%), mandibular branch only (20%), combined: ophthalmic branch with maxillary branch (6.7 %), and ophthalmic branch with mandibular branch (6.7%) respectively, combined maxillary and mandibular branch (26.7%) and affected all three branches (13.4%). The latencies of the BR, left and right side together, between subgroups were significantly higher for values R1 (homolateral early response), R2 (homolateral late response), R2c latency (contralaterally expressed response) in the TN-subgroup (p < 0.05). On the basis of the presence of R1c and R3 latencies and upon considering the abnormal findings of the BR, no statistically significant differences were found between the examined subgroups (p > 0.05). Blink-reflex parameters (R1, R2 and R2c) were significantly abnormal comparing TN-patients with healthy volunteers. The R3 component of the BR was related to noxious stimuli, likewise by innocuous stimuli.

Sex assessment is a key part of forensic analysis to establish the identity of unknown deceased individuals. Previous studies have shown that canines are the most dimorphic teeth, but population-specific data are necessary for forensic methods. This study explores sex dimorphism in canine crown dimensions and morphology in a contemporary Croatian population. The material consisted of 302 dental casts (147 females, 155 males) of orthodontic patients and dental students (11–25 years). The distal accessory ridge (DAR) of the upper and lower canines was evaluated using the Arizona State University Dental Anthropology System. Mesiodistal (MD) and buccolingual (BL) crown dimensions were measured on 120 casts. Sex differences in MD and BL dimensions were significant (p < 0.05) for all the canines (upper and lower, left and right), while in DAR only for lower canines (p < 0.000001). When all variables were put into the model, backward stepwise discriminant function analysis isolated lower canine DAR and lower left canine MD as the two independent variables differentiating sex. Using these two variables, a discriminant function formula allowed for sex determination with an accuracy of 73.5%. This study shows that both canine crown morphology and dimensions are useful for sex determination, especially for lower canines. These methods can be applied to children, as lower canines erupt at about 9 years of age.

Abstract The proximity to structural phase transitions in IV-VI thermoelectric materials is one of the main reasons for their large phonon anharmonicity and intrinsically low lattice thermal conductivity κ. However, the κ of GeTe increases at the ferroelectric phase transition near 700 K. Using first-principles calculations with the temperature dependent effective potential method, we show that this rise in κ is the consequence of negative thermal expansion in the rhombohedral phase and increase in the phonon lifetimes in the high-symmetry phase. Strong anharmonicity near the phase transition induces non-Lorentzian shapes of the phonon power spectra. To account for these effects, we implement a method of calculating κ based on the Green-Kubo approach and find that the Boltzmann transport equation underestimates κ near the phase transition. Our findings elucidate the influence of structural phase transitions on κ and provide guidance for design of better thermoelectric materials.

Abstract Increasing the Seebeck coefficient S in thermoelectric materials usually drastically decreases the electrical conductivity σ, making significant enhancement of the thermoelectric power factor σ S 2 extremelly challenging. Here we predict, using first-principles calculations, that the extraordinary properties of charged ferroelectric domain walls (DWs) in GeTe enable a five-fold increase of σ S 2 in the DW plane compared to bulk. The key reasons for this enhancement are the confinement of free charge carriers at the DWs and Van Hove singularities in the DW electronic band structure near the Fermi level. These effects lead to an increased energy dependence of the DW electronic transport properties, resulting in more than a two-fold increase of S with respect to bulk, without considerably degrading the in-plane σ. We propose a design of a nano-thermoelectric device that utilizes the exceptional thermoelectric properties of charged ferroelectric DWs. Our findings should inspire further investigation of ferroelectric DWs as efficient thermoelectric materials.

Objectives: Dental profession is characterized by a high risk of injuries at work due to exposure to specific working conditions. The operating area in a patient’s mouth is small, and it is handled by a large number of sharp instruments and drills that rotate at high speed, which creates an aerosol contaminated with particles of saliva and blood. This poses a risk of transmitting infections from patients to the dentist through stabbing incidents and cuts, which are some of the most common occupational injuries that are reported in the scientific literature. Objective: The aim of this study was to examine the frequency of occupational injuries among dentists in Croatia, to establish most common injuries, and to determine the main risk factors. The aim of this research was also to determine the dentists’ opinion on causes that are responsible for the occupational diseases and injuries. Material and methods: The survey was conducted based on a sample of 406 dentists from Croatia as respondents to an electronic survey. Results: 63.05% of the respondents suffered injuries caused by dental practitioners. The most common injuries were needle puncture incidents (57.75%) and cuts (20.86%), followed by eye injuries (13.37%), patient bite (4.81%) and punches (1.60%). The largest number of respondents stated the improper posture as the most important cause of occupational diseases and injuries, followed by stress, infection and noise. Conclusion: knowledge of risk factors is the first step of injury prevention. Our respondents were largely aware of the dangers surrounding them. Nevertheless, the frequency of injuries was high and there is still a need for preventive measures to minimize the frequency of injuries in dentistry.

A diluted ethanol orange peel extract was used for sustainable dyeing and functionalization of different fabrics. The extract analysis was performed using UPLC-ESI-MS/MS; its total flavonoid (0.67 g RE/100 g d.w.) and antioxidant (2.81 g GAE/100 g d.w.) contents and antioxidant activity (IC50 of 65.5 µg/mL) were also determined. The extract dyeing performance at various dyebath pH values was evaluated using multifiber fabric. Among six fabrics, extract possessed the ability for dyeing wool, polyamide, and cellulose acetate (at pH 4.5), which color strength (K/S) values increased after washing (9.7–19.8 vs. 11.6–23.2). Extract:water ratio of 20:35 (v/v) was found to be sufficient for achieving satisfactory K/S values (i.e., 20.17, 12.56, and 10.38 for wool, polyamide, and cellulose acetate, respectively) that were slightly changed after washing. The optimal dyeing temperatures for wool, polyamide, and cellulose acetate are 55, 35, and 25 °C, while the equilibrium dye exhaustion at those temperatures was achieved after 45, 120, and 90 min, respectively. The color coordinate measurements revealed that wool and polyamide fabrics are yellower than cellulose acetate, while, compared to polyamide and cellulose acetate, wool is redder. Possible interactions between selected fabrics and extract compounds are suggested. All fabrics possessed excellent antioxidant activity (88.6–99.6%) both before and after washing. Cellulose acetate provided maximum bacterial reduction (99.99%) for Escherichia coli, and Staphylococcus aureus, which in the case of Staphylococcus aureus remained unchanged after washing. Orange peel extract could be used for simultaneous dyeing and functionalization of wool and polyamide (excellent antioxidant activity) and cellulose acetate (excellent antioxidant and antibacterial activity) fabrics.

Objective: Turner syndrome (TS) and Klinefelter syndrome (KS) represent the two most common X chromosome aneuploidies, each associated with systemic disruptions to growth and development. Effects of these conditions on tooth crown morphology are explored in a sample of Croatian individuals. Material and Methods: The sample included 57 TS, 37 KS and 88 control individuals. Dental crown morphology was scored on dental casts according to the Turner-Scott Dental Anthropology System. Results: Incisor shoveling and the hypocone were significantly different between TS individuals and both control and KS individuals. Individuals with TS exhibit lower grades of expression than either group. Furthermore, the number of lingual cusps on the mandibular premolars, the hypoconulid on the mandibular second molar, and cusp 7 on the mandibular first molar were significantly different, though pair-wise comparisons did not elucidate these differences. Tuberculum dentale, distal accessory ridge, and Carabelli’s trait were expressed similarly to the control. KS individuals were not significantly different from control individuals for any trait, though this may be related to sample size. Conclusions: Previous studies suggest the loss of an X chromosome has a reducing effect on dental crown morphology, which is confirmed in this research. TS individuals exhibit generally simpler dental morphology compared to the control sample, though some traits are expressed comparably to the control sample. The effects of KS are less clear. Though previous studies suggest that the presence of an extra X chromosome increases dental crown dimensions, there was no notable effect on crown morphology in this study.

The aim of the study was to analyze zygomatic air cell defect (ZACD) incidence using magnetic resonance imaging (MRI) and validity of panoramic radiograph as a comparative method of ZACD diagnostics. The connection between ZACD incidence, age, left/right temporomandibular joint (TMJ) and comorbidity with diagnosis of TMJ disorder was analyzed. Panoramic radiographs and MRIs of 140 TMJs of 70 consecutive patients with previously confirmed TMJ diagnosis were compared in the study. A grading system (4-point scale from ‘0’ for absence to ‘3’ for most extended pneumatization) was used to determine low signal on MRIs as pneumatization of temporal bone. ZACD was diagnosed in 22 joints of 15 patients (incidence, 20.4%), with seven patients having bilateral appearance. In the joints of nine patients, ZACD was identified as extensive according to the grading scale. The validity of ZACD findings on panoramic radiographs compared with MRI findings yielded 0.45 sensitivity and 0.98 specificity. There was no relation (p>0.05) between comorbidity of ZACD and TMJ disorder, either by age or side of the body. More prevalent ZACD in our MRI analysis than in other researches based on panoramic radiographs could be explained by the expected superimposed osseous structures in the area of articular eminence.

The purpose was to evaluate dental caries experience in different male subpopulations of Croatian Army recruits and dental students, and subsequently, smoking habits related to the level of education and place of residence. Croatian army recruits (n=248; mean age 20.2) and male dental students (n=56; mean age 21.5) were evaluated according to DMFT and FST indices, divided according to age and place of residence, and interviewed about their dietary habits and smoking of tobacco. In the subpopulation of recruits, the median value of DMFT was 6 and of FST index 25. A statistically significant difference was recorded between DT and FST index (p

Forensic odontology is the application of dentistry within the criminal justice system. Forensic expertise, including dental identification, mostly relies on dental records. We explored the practice of maintaining dental records among Croatian dentists, as well as their knowledge of legal regulations and the application of dental records in forensic odontology. In all, 145 dentists participated in an online survey. Questions covered general information on dentists, maintenance of dental records, and knowledge of legal requirements and forensic odontology. Overall, 70% of dentists obtain and archive written informed consents, while 87% record dental status. Generally, non-carious dental lesions and developmental dental anomalies were not recorded. About 72% of dentists record filling material and surfaces. Only 32% of dentists know the legal requirements for keeping records, whereas 21% have no knowledge of forensic odontology and its purpose. The survey revealed different practices in the maintenance of dental records, including significant flaws and lack of awareness of its forensic importance. This obvious need for additional education on proper maintenance of dental records could be met by including forensic odontology in compulsory undergraduate courses and postgraduate dental education. Establishing national and international standards in dental charting would comply with contemporary trends in health care and the requirements of forensic expertise.

The aim of this study was to evaluate the use of splint treatment for therapy of osteoarthritis of temporomandibular joint, and to compare the level of anxiety (State-Trait Anxiety Inventory,STAI) and clinical characteristics between 16 patients and 20 asymptomatic dental school students. Magnetic resonance imaging (MRI) was used for all subjects. Dental students showed a statistically signiicant higher capacity of mouth opening (p

New, simple, cost effective, accurate and reproducible UV-spectrophotometric methods were developed and validated for the estimation of sodium usnate in pharmaceutical preparations. Sodium usnate was estimated at 290 nm in water and phosphate buffer (pH 3):methanol (11:20 V/V). Beer’s law was obeyed in the concentration range of 0.1–5 μg·cm−3 (r = 0.997) in water and 1–12 μg·cm−3 (r = 0.999) in the phosphate buffer:methanol. The apparent molar absorptivity and Sandell’s sensitivity coefficient were found to be 3.16×104 dm3·mol−1·cm−1 and 11.58 ng·cm–2/0.001 A in water and 3.72×104 dm3·mol−1·cm−1 and 9.83 ng·cm–2/0.001 A in phosphate buffer:methanol, respectively, indicating the high sensitivity of the proposed methods. These methods were tested and validated for various parameters according to ICH guidelines. The detection and quantitation limits were found to be 0.0721 and 0.2163 μg·cm–3 in water and 0.163, 0.489 μg·cm−3 in phosphate buffer:methanol, respectively. The proposed methods were successfully applied for the determination of sodium usnate in pharmaceutical preparations. The results demonstrated that the procedure is accurate, precise and reproducible (R.S.D. < 2 %).

A selective, precise and stability-indicating, modified high performance liquid chromatographic method for the analysis of sodium picosulfate both as a bulk drug and in formulations was developed and validated. As the method could effectively separate the drug from its degradation product, it can be employed as a stability-indicating one. The chromatographic separation was achieved on a ZORBAX Eclipse XDB C-18 analytical column. The mobile phase consisted of phosphate buffer (pH 7):acetonitrile (85:15 v/v). The absorbance was monitored with a DAD detector at 263 nm. The flow rate was 1.5 mL min-1. Statistical analysis proved the method is repeatable, selective, and accurate for estimation of sodium picosulfate in the presence its degradation product. Forced degradation studies were performed on bulk sample of sodium picosulfate using heat (25, 40, 60 and 80 °C) and oxidation (0.1, 0.5 and 1% v/v hydrogen peroxide). The proposed method was successfully applied, with excellent recovery, to the analysis of a pharmaceutical formulation (Sodium picosulfate, Zdravlje-Actavis, Serbia)

A new procedure for the analytical control of a pharmaceutical formulation by high performance liquid chromatographic (HPLC) is proposed. It allows the simultaneous determination of the major compounds in the formulation of the active compound (sodium picosulfate) and the degradation product (impurity), which slowly degrades by hydrolysis with different concentrations of sodium hydroxide, at different temperatures. Separation of sodium picosulfate from the degradation product was performed using the ZORBAX Eclipse XDB C-18 column, with a mobile phase consisting of phosphate buffer (pH = 7) : acetonitrile 85:15 v/v. The method was validated using the HPLC procedure, evaluating selectivity, accuracy, linearity and precision. The proposed method was successfully applied, with excellent recovery, to the analysis of a pharmaceutical formulation (Sodium picosulfate, Zdravlje-Actavis, Serbia) containing sodium picosulfate.

Simple, accurate and reproducible UV-spectrophotometric method was developed and validated for the estimation of phenylephrine hydrochloride in pharmaceutical nasal drops formulations. Phenylephrine hydrochloride was estimated at 291 nm in 1 mol⋅dm-3 sodium hydroxide (pH 13.5). Beer’s law was obeyed in the concentration range of 10–100 μg⋅cm−3 (r2 = 0.9990) in the sodium hydroxide medium. The apparent molar absorptivity was found to be 1.63×103 dm3⋅mol−1⋅cm−1. The method was tested and validated for various parameters according to the ICH (International Conference on Harmonization) guidelines. The detection and quantitation limits were found to be 0.892 and 2.969 μg⋅cm−3, respectively. The proposed method was successfully applied for the determination of phenylephrine hydrochloride in pharmaceutical nasal drops formulations. The results demonstrated that the procedure is accurate, precise and reproducible (relative standard deviation < 1 %), while being simple, cheap and less time consuming, and hence can be suitably applied for the estimation of phenylephrine hydrochloride in different dosage forms.

This paper presents the experimental results for the simultaneous spectrophotometric determination of two active components in nasal solutions. The resolution of two-component mixtures of timazolin and phenylephrine has been accomplished by using partial least-squares. The method comprised of the absorptivity measurement in a nasal solution at wavelengths of 265 and 272 nm, respectively. Notwithstanding the presence of two components and their high degree of spectral overlap, they have been determined simultaneously with high accuracy and precision, with no interference, rapidly and without resorting to extraction procedures using non aqueous solvents. This method was tested and validated for various parameters according to ICH guidelines. The results demonstrated that the procedure is accurate, precise and reproducible (relative standard deviation

Carbon atoms can form structures in one, two and three dimensions due to their unique chemical versatility. In terms of thermal conductivity, carbon polymorphs cover a wide range from very low values with amorphous carbon to very high values with diamond, carbon nanotubes and graphene. Schwarzites are a class of three-dimensional fully covalent sp ^2 -bonded carbon polymorphs, with the same local chemical environment as graphene and carbon nanotubes, but negative Gaussian curvature. We calculate the thermal conductivity of a (10,0) carbon nanotube, graphene and two schwarzites with different curvature, by molecular dynamics simulations based on the Tersoff empirical potential. We find that schwarzites present a thermal conductivity two orders of magnitude smaller than nanotubes and graphene. The reason for such large difference is explained by anharmonic lattice dynamics calculations, which show that phonon group velocities and mean free paths are much smaller in schwarzites than in nanotubes and graphene. Their reduced thermal conductivity, in addition to tunable electronic properties, indicate that schwarzites could pave the way towards all-carbon thermoelectric technology with high conversion efficiency.