Search

With the developments in manufacturing technologies, interest on porosity graded alumina ceramics has increased for applications such as thick barrier coating, cores for precision casting and biocompatible implants. Lithography-based Ceramic Manufacturing (LCM) offers high quality and near-net manufacturing of complex ceramic components with high resolution. Multi-material LCM printing setup can overcome the main problems of conventional manufacturing techniques for fabrication of porosity graded alumina with desired microstructure and gradient architecture (i.e., gradient direction, fraction, type). Two-vat system in the newly developed multi-material LCM printer setup enables not only assigning one material to any desired layer but also use of different materials in each layer by assigning the respective materials to selected pixels of the layer image. This article introduces methodologies for the fabrication of porosity graded alumina ceramics (PGACs) with continuous and discrete porosity transitions zones by combining sacrificial templating and LCM. It is illustrated how the properties of the slurry and the desired gradient architecture play an important role for the selection of suitable method.

In this work we demonstrate the feasibility of fabricating textured alumina employing a lithography-based ceramic manufacturing process. The combination of vat rotation and platform immersion contributes to the alignment of alumina templates during printing. Templated Grain Growth during sintering provides a high degree of texture (Lotgering Factor ​~ ​0.80) with relatively low porosity (approx. 7%). A comparable characteristic biaxial strength of 640 ​MPa and 570 ​MPa was measured for textured and equiaxed alumina samples, opening the path for 3D printing textured ceramics of complex architectures for structural and functional applications.

This work demonstrates the use of additive manufacturing to design and fabricate alumina ceramics with strength as high as 1 ​GPa. A multi-material approach is employed by embedding alumina-zirconia layers between outer pure alumina layers with significant compressive residual stresses. Biaxial bending is performed both on the 3D printed multi-material and monolithic alumina parts. Results are analysed in the framework of Weibull statistics. A characteristic biaxial strength higher than 1 ​GPa is measured on the multilayers, compared to 650 ​MPa in monolithic alumina, the difference corresponding to the magnitude of compressive residual stresses due to the thermal mismatch between material regions during cooling from sintering. This is the first report of employing additive manufacturing to tailor the strength of alumina ceramics, taking advantage of the layer-by-layer printing process. Designing complex-shaped ceramic architectures with residual stresses through additive manufacturing opens a new path for fabrication of technical ceramics with tailored mechanical properties.