Search

The thermal analysis of hybrid nano-fluids is a significant research area with diverse applications in industries such as paint, electronics, and mechanical engineering. Existing literature provides limited solutions to the governing equations for the flow of these fluids. Modeling and deriving non-similar solutions for these equations pose interesting and challenging mathematical problems. This study focuses on investigating heat transfer in the flow of two types of nano-fluids, specifically Al2O3/H2O micropolar nano-fluid and Al2O3 + Ag/H2O hybrid nano-fluid, near an isothermal sphere. Conservation laws are employed to formulate the mathematical problem, and by normalizing the variables, the governing equations are converted into a set of dimensionless partial differential equations. Non-similar solutions are then obtained using numerical methods. A comparative analysis is carried out to assess the influence of various parameters on different profiles and engineering quantities for both types of nano-fluids. Both linear and rotational velocities fall down near the surface of sphere with rising microstructure in hybrid nanofluid. The micro-rotation parameter rises the temperature profile while reduces the Nusselt number of both traditional Al2O3/water based nanofluid as well as hybrid nanofluid.

The newest class of heat transfer improvement is accomplished by using hybrid Nano-fluids. Therefore, the heat transfer and pressure drop of a mixture of Iron oxide (Fe3O4) and Magnesium oxide (MgO) nanoparticles suspended into the base fluid under a turbulent regime through a plain and wavy tube are computed employing commercial software ANSYS Fluent. A mixture of Fe3O4 and MgO nanoparticles in pure water is considered a brand-new type of hybrid Nano-fluid for boosting heat transfer. The simulation procedures were performed utilizing the single and multiphase (mixture) approaches at Reynolds number in the range of (3,916 - 31,331) and volume concentrations range of (0.5% ≤ φ ≤ 2%). The plain and wavy walls are subjected to a constant heat flux of 18,189 W/m2, and the flow is presumed as fully developed. The computed outcomes are validated with the correlation equations and experimental data of literature. The outcomes demonstrate that boosting the nanoadditives fraction leads to a remarkable improvement of heat transfer and hydrothermal performance indicator (HPI) of MgO-Fe3O4 /H2O Hybrid Nano-fluid through the considered tubes compared with the conventional base fluid. However, the increment is slightly higher with a wavy wall tube than with the plain one. Moreover, new correlations were suggested for specific water-based hybrid Nano-fluid volume concentrations.