Search

Three-dimensional printing is a rapidly growing manufacturing method for orthopaedic implants and it is currently thriving in several other engineering industries. It enables the variation of implant design and the construction of complex structures which can be exploited in orthopaedics and other medical sectors. In this review, we develop the vocabulary to characterise 3D printing in orthopaedics from terms defined by industries employing 3D printing, and by fully examining a 3D-printed off-the-shelf acetabular cup (Fig. 1). This is a commonly used 3D-printed implant in orthopaedics, and it exhibits a range of prominent features brought about by 3D printing. The key features and defects of the porous and dense regions of the implant are clarified and discussed in depth to determine reliable definitions and a common understanding of characteristics of 3D printing between engineers and medical experts in orthopaedics. Despite the extensive list of terminology derived here, it is clear significant gaps exist in the knowledge of this field. Therefore, it is necessary for continued investigations of unused implants, but perhaps more significantly, examining those in vivo and retrieved to understand their long-term impact on patients and the effects of certain features (e.g. surface-adhered particles). Analyses of this kind will establish an understanding of 3D printing in orthopaedics and additionally it will help to update the regulatory approach to this new technology.

Abstract Background Three-dimensional computed-tomography (3D-CT) planning for primary Total Hip Arthroplasty (THA) typically uses the external femoral surface; as a result, it is difficult to predict the prosthetic femoral version (PFV) for uncemented femoral stems that press-fit to the internal surface of the bone. Cemented fixation allows the surgeon to adjust the version independent of the internal femoral anatomy. We aimed to better understand the effect of the fixation type on PFV. Methods This was a case series study including a total of 95 consecutive patients (106 hips), who underwent uncemented (n = 81 hips) and cemented (n = 25 hips) primary THA using the posterior approach. The surgeon aimed for a PFV of 20°. Our primary objective was to compare PFV in both groups; our secondary objective was to evaluate the clinical outcomes. Results The mean (± SD) PFV was 13° (± 9°) and 23° (± 8°) for the uncemented and cemented THA groups (P

CT is the principal imaging modality used for the pre-operative 3D planning and assessment of total hip arthroplasty (THA). The image quality offered by CT has a radiation penalty to the patient. Higher than necessary radiation exposure is of particular concern when imaging young patients and women of childbearing age, due to the greater risk of radiation-induced cancer in this group. A harmonised low-dose CT protocol is needed, evidenced by the huge variability in the 17 protocols reviewed. The majority of the protocols were incomplete, leading to uncertainty among radiographers when performing the scans. Only three protocols (20%) were optimised for both ‘field of view’ and image acquisition parameters. 10 protocols (60%) were optimised for ‘field of view’ only. These protocols included imaging of the relevant landmarks in the bony pelvis in addition to the knees – the reference for femoral anteversion. CT parameters, including the scanner kilovoltage (kV), milliamperage–time product (mAs) and slice thickness, must be optimised with a ‘field of view’ that includes the relevant bony landmarks. The recommended kV and mAs values were very wide ranging from 100 to 150 and from 100 to 250, respectively. The large variability that exists amongst the CT protocols illustrates the need for a more consistent low-dose CT protocol for the planning of THA. This must provide an optimal balance between image quality and radiation dose to the patient. Current CT scanners do not allow for measurements of functional pelvic orientation and additional upright imaging modalities are needed to augment them.

In recent decades, agricultural intensification has led to a strong decline in biodiversity. Field margins act as shelters and dispersal corridors for biodiversity in highly disturbed landscapes, and are critical to the maintenance of ecosystem services. However, they are also impacted by agricultural practices in neighboring fields. Agricultural impacts are often studied at field to landscape scales, and rarely across biogeographic regions. One of the challenges in large-scale studies is the lack of standardized monitoring schemes including both biodiversity and accurate estimation of agricultural practices. Here, we take advantage of a national monitoring scheme in 462 sites in France, to assess the effects of agricultural practices on field margin flora at different extents and resolutions. We used spatial simultaneous autoregressive and generalized dissimilarity models to assess the response of plant richness and composition to climatic, soil and landscape conditions, and to agricultural (fertilization, herbicides) and margin management drivers. Analyses were repeated at the site-level, 40 and 75 km resolutions, and at regional and national extents. We found that the impact of agricultural practices on species richness was most important at the site-level, whereas climate and crop diversity became more important at the 75 km resolution. Compositional variations responded differently, with climate being more important at the site-level, and fertilization and crop diversity at the coarsest resolution. There was a strong variation in the variance explained by models among regions, but climate effects were weaker within biogeographic units compared to the national level, and different agricultural practices stood out as influential in different regions, suggesting that the regional context is fundamental in determining plant community structure. To efficiently conserve biodiversity, we therefore recommend the implementation of agricultural measures adapted to each region.

Abstract Background Implantation of the femoral component with suboptimal version is associated with instability of the reconstructed hip joint. High variability of Prosthetic Femoral Version (PFV) has been reported in primary Total Hip Arthroplasty (THA). Three-dimensional (3D) Patient-Specific Instrumentation (PSI) has been recently developed and may assist in delivering a PFV within the intended range. We performed a pilot study to better understand whether the intra-operative use of a novel PSI guide, designed to deliver a PFV of 20°, results in the target range of PFV in primary cemented THA. Methods We analysed post-operative Computed-Tomography (CT) data of two groups of patients who underwent primary cemented THA through posterior approach; 1. A group of 11 patients (11 hips) for which the surgeon used an intra-operative 3D-printed stem positioning guide (experimental) 2. A group of 24 patients (25 hips) for which the surgeon did not use the guide (control). The surgeon aimed for a PFV of 20°, and therefore the guide was designed to indicate the angle at which the stem was positioned intra-operatively. PFV angles were measured using the post-operative 3D-CT models of the proximal femurs and prosthetic components in both groups. Our primary objective was to compare the PFV in both groups. Our secondary objective was to evaluate the clinical outcome. Results Mean (± SD) values for the PFV was 21.3° (± 4.6°) and 24.6° (± 8.2°) for the experimental and control groups respectively. In the control group, 20% of the patients reported a PFV outside the intended range of 10° to 30° anteversion. In the experimental group, this percentage dropped to 0%. Satisfactory clinical outcome was recorded in both groups. Conclusion The intra-operative use of a PSI PFV guide helped the surgeon avoid suboptimal PFV in primary cemented THA. Further studies are needed to evaluate if the PSI guide directly contributes to a better clinical outcome.

Resumo Cuidados paliativos promovem qualidade de vida e alívio de sofrimento a pacientes e seus familiares. Nesse contexto, a estratégia a ser adotada na alimentação desses pacientes envolve reflexões da equipe de saúde. Esta pesquisa tem como objetivo verificar a compreensão de profissionais da área hospitalar que atuam no setor de oncologia sobre a nutrição/alimentação de pacientes sob cuidados paliativos. Realizaram-se individualmente entrevistas com dez profissionais, que compreenderam que os cuidados melhoram a qualidade de vida por meio do controle de sintomas físicos, psicológicos e espirituais dos pacientes e seus familiares. Entendem que, além do atendimento das necessidades nutricionais, a alimentação pode proporcionar prazer, conforto e memória afetiva, e que a comunicação é fundamental para um cuidado integrado e humanizado. Assim, julga-se importante desenvolver estratégias de intervenção a partir de treinamentos e da educação continuada desses profissionais.

Abstract Physical activity and a healthy lifestyle are crucial factors for delaying and reducing the effects of sarcopenia. Cycling has gained popularity in the last decades among midlife men. While the cardiovascular benefits of cycling and other endurance exercises have been extensively proved, the potential benefits of lifelong aerobic exercise on muscle health have not been adequately studied. Our aim was to quantify the benefits of cycling in terms of muscle health in middle-aged men, using magnetic resonance imaging. We ran a cross-sectional study involving two groups of middle-aged male adults (mean age 49 years, range 30–65) that underwent Dixon MRI of the pelvis. The groups consisted of 28 physically inactive (PI) and 28 trained recreational cyclists. The latter had cycled more than 7000 km in the last year and have been training for 15 years on average, while the PI volunteers have not practiced sports for an average of 27 years. We processed the Dixon MRI scans by labelling and computing the fat fraction (FF), volume and lean volume of gluteus maximus (GMAX) and gluteus medius (GMED); and measuring the volume of subcutaneous adipose tissue (SAT). We found that the cyclists group had lower FF levels, a measure of intramuscular fat infiltration, compared to the PI group for GMAX (PI median FF 21.6%, cyclists median FF 14.8%, p

Objectives This study aims to quantitatively evaluate whether there are muscle mass differences between male and female recreational cyclists and compare muscle quality and body composition in the pelvis region between two well-matched groups of fit and healthy male and female adults.Methods This cross-sectional study involved 45 female and 42 male recreational cyclists. The inclusion criteria for both groups were to have cycled more than 7000 km in the last year, have an absence of injuries and other health problems, have no contraindication to MRI, and be 30–65 years old. Our main outcome measures were fat fraction, as a measure of intramuscular fat (IMF) content, and volume of the gluteal muscles measured using Dixon MRI. The gluteal subcutaneous adipose tissue (SAT) volume was evaluated as a secondary measure.Results We found that there were no sex differences in the IMF content of gluteus maximus (GMAX, p=0.42), gluteus medius (GMED, p=0.69) and gluteus minimus (GMIN, p=0.06) muscles, despite females having more gluteal SAT (p

Biodiversity is a key component of agricultural ecosystems and belongs to one of the exceeded planetary boundaries. In the quest for innovation to mitigate impact, it is essential to have tools to assess the anthropogenic impact on biodiversity. In this study, we developed a new indicator, I-BIO that aimed to predict the impacts of management practices and the influence of the landscape on overall biodiversity at species group level. I-BIO encompassed four groups: microorganisms, vegetation, invertebrates and vertebrates. This predictive indicator was built using DEXi software that facilitates the design of hierarchical decision trees, based on input variables in the form of qualitative classes, aggregated using utility functions. I-BIO was constructed using data from a long-term platform in Scotland and then applied to two data sets in France and one in Scotland. The results showed that the lowest class is predominant for all branches especially for invertebrates and soil invertebrates. Monte Carlo sampling was used to test for sensitivity. Then, a validation step was carried out to compare I-BIO outputs with real data using data on the four groups from Scottish and French datasets. I-BIO predictions of weed and soil invertebrate abundance conformed to field data. Due to low numbers of samples, validation of microorganisms, flying invertebrates and vertebrates predictions require more data. Future developments of I-BIO will focus on predictions specifically to assess the impact of management on species richness. Avenues for improvement include a better integration of landscape features and the history of agricultural practices as they both have a great influence on biodiversity.

Abstract Background 3D printed patient-specific titanium acetabular cups are used to treat patients with massive acetabular defects. These have highly porous surfaces, with the design intent of enhancing bony fixation. Our aim was to characterise these porous structures in commercially available designs. Methods We obtained 12 final-production, patient-specific 3D printed acetabular cups that had been produced by 6 manufacturers. High resolution micro-CT imaging was used to characterise morphometric features of their porous structures: (1) strut thickness, 2) the depth of the porous layer, (3) pore size and (4) the level of porosity. Additionally, we computed the surface area of each component to quantify how much titanium may be in contact with patient tissue. Statistical comparisons were made between the designs. Results We found a variability between designs in relation to the thickness of the struts (0.28 to 0.65 mm), how deep the porous layers are (0.57 to 11.51 mm), the pore size (0.74 to 1.87 mm) and the level of porosity (34 to 85%). One manufacturer printed structures with different porosities between the body and flange; another manufacturer had two differing porous regions within the body of the cups. The cups had a median (range) surface area of 756.5 mm2 (348 – 1724). Conclusions There is a wide variability between manufacturers in the porous titanium structures they 3D print. We do not currently know whether there is an optimal porosity and how this variability will impact clinically on the integrity of bony fixation; this will become clearer as post market surveillance data is generated.

Abstract Preterm newborns are more likely to suffer from infectious diseases at birth compared to children delivered at term. Whether this is due to compromised cellular, humoral, or organ-specific development remains unclear. To begin to define whether maternal–fetal antibody transfer profiles differ across preterm (PT) and fullterm (FT) infants, the overall quantity and functional quality of an array of 24 vaccine-, endemic pathogen-, and common antigen-specific antibodies were assessed across a cohort of 11 PT and 12 term-delivered maternal:infant pairs from birth through week 12. While total IgG levels to influenza, pneumo, measles, rubella, EBV, and RSV were higher in FT newborns, selective Fc-receptor binding antibodies was noted in PT newborns. In fact, near equivalent antibody-effector functions were observed across PT and FT infants, despite significant quantitative differences in transferred antibody levels. Moreover, temporal transfer analysis revealed the selective early transfer of FcRn, FcγR2, and FcγR3 binding antibodies, pointing to differential placental sieving mechanisms across gestation. These data point to selectivity in placental transfer at distinct gestational ages, to ensure that children are endowed with the most robust humoral immunity even if born preterm.

Abstract Background Titanium, which is known to be a highly biologically inert element, is one of the most commonly used metals in orthopaedic implants. While cobalt and chromium blood metal ion testing is routinely used in the clinical monitoring of patients with metal-on-metal hip implants, much less is known about the levels of titanium in patients with other implant types. The aim of this study was to better understand the normal ranges of blood titanium levels in patients implanted with large and sliding titanium constructs by comparison with reference levels from conventional titanium hips. Methods This study examined data collected from 136 patients. Over a period of 24 months, whole blood samples were collected from 41 patients implanted with large titanium implants: long (range 15 to 30 cm) spine rods with a sliding mechanism (“spine rods”, n = 18), long bone tumour implants (“tumour implants”, n = 13) and 3D-printed customised massive acetabular defect implants (“massive acetabular implants”, n = 10). This data was compared with standard, uncemented primary titanium hip implants (“standard hips”, 15 cm long) (n = 95). Clinical, imaging and blood titanium levels data were collected for all patients and compared statistically between the different groups. Results The median (range) of blood titanium levels of the standard hip, spine rods, femoral tumour implants and massive acetabular implants were 1.2 ppb (0.6–4.9), 9.7 ppb (4.0–25.4), 2.6 ppb (0.4–104.4) and 5.7 ppb (1.6–31.5) respectively. Spine rods and massive acetabular implants had significantly greater blood titanium levels compared to the standard hips group (p

Background:. The management of massive acetabular defects at the time of revision hip surgery is challenging. Severe pelvic bone loss and the heterogeneity and quality of the remaining bone stock can compromise the fixation and mechanical stability of the implant. Methods:. We reviewed a database of consecutive patients who had undergone acetabular reconstruction with the use of a custom 3D-printed implant with a dual-mobility bearing for the treatment of Paprosky type-3B defects between 2016 and 2019. Functional and radiological outcomes were assessed. Results:. A total of 26 patients (17 women and 9 men) with a minimum follow-up of 36 months (median, 53 months; range, 36 to 77 months) were identified. The median age at surgery was 69 years (range, 49 to 90 years), and 4 patients had pelvic discontinuity. The cumulative implant survivorship was 100%. The median Oxford Hip Score improved significantly from 8 (range, 2 to 21) preoperatively to 32 (range, 14 to 47) postoperatively (p = 0.0001). One patient had a transient sciatic nerve palsy, 1 hip dislocated 6 months postoperatively and was managed nonoperatively, and 1 infection recurred. No patient had a fracture. Radiographic evaluation showed bone ingrowth at the bone-implant interface in 24 patients (92%) at ≥12 months of follow-up and showed no evidence of implant loosening or migration at the latest follow-up (3 to 6 years). Conclusions:. Excellent functional improvement, implant survivorship, and osseointegration were recorded in the patient cohort. Accurate preoperative planning and the adoption of custom 3D-printed implants showed promising results in complex revision hip surgery. Level of Evidence:. Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

The placement of acetabular implant components determines the short- and long-term outcomes of total hip replacement (THR) and a number of tools have been developed to assist the surgeon in achieving cup orientation to match the surgical plan. However, the accuracy and precision of 3D-CT for the measurement of acetabular component position and orientation is yet to be established. To investigate this, we compared measurements of cobalt chrome acetabular components implanted into 2 different bony pelvic models between a coordinate measuring Faro arm and 3 different low dose CT images, including 3D-CT, 2D anterior pelvic plane (APP) referenced CT and 2D scanner referenced (SR) CT. Intra-observer differences were assessed using the Intraclass correlation coefficient (ICC). The effect of imaging the pelvis positioned in 3 different orientations within the CT scanner was also assessed. The measured parameters were the angles of inclination and version. 3D-CT measurements were found to closely match the “true values” of the component position measurements, compared with the 2D-CT methods. ICC analysis also showed good agreement between the coordinate measuring arm (CMA) and 3D-CT but poor agreement between the 2D SR method, in the results from two observers. When using the coordinate system of the CT scanner, the measurements consistently produced the greatest error; this method yielded values up to 34° different from the reference digitising arm. However, the difference between the true inclination and version angles and those measured from 3D APP CT was below half a degree in all cases. We concluded that low radiation dose 3D-CT is a validated reference standard for the measurement of acetabular cup orientation.

Objetivo: Analisar o estado nutricional e o tempo de jejum pré-operatório de pacientes oncológicos submetidos a procedimentos cirúrgicos. Método: Estudo de abordagem quantitativa, realizado com pacientes com diagnóstico de câncer de cabeça e pescoço e/ou trato gastrointestinal submetidos à cirurgias durante o mês de novembro de 2020. Foi aplicado questionário para coleta dos dados clínicos, cirúrgicos e de trajetória terapêutica e realizada avaliação nutricional por meio da antropometria (peso, estatura, circunferência da panturrilha) e aplicação da Avaliação Subjetiva Global Produzida pelo Próprio Paciente (ASG-PPP). As variáveis foram analisadas de acordo com a natureza do dados. Resultados: Foram avaliados 20 pacientes com média de idade de 62,55 anos, sendo 55% do sexo feminino e 80% apresentaram desnutrição moderada ou grave pela ASG-PPP. O tempo médio de jejum pré-operatório foi de 14,21 horas. O tempo médio entre o diagnóstico e a realização da cirurgia foi de 158 dias. Não houve diferença estatística entre o tempo de trajetória terapêutica e o diagnóstico nutricional. Conclusão: O tempo de jejum pré-operatório ultrapassou as orientações de 8 a 12 horas convencionais e 80% dos pacientes apresentavam desnutrição moderada ou grave segundo a ferramenta ASG-PPP. Evidencia-se a necessidade de desenvolvimento protocolos de abreviação do tempo de jejum pré-operatório, proporcionando melhores condições para a recuperação pós-operatória. Palavras-chave: Jejum. Neoplasias. Estado nutricional. Oncologia.

Abstract Background With the Persona® knee system a novel anatomic total knee design was developed, which has no pre-coating, whereas the predecessor knee system is pre-coated with polymethylmethacrylate (PMMA). Joint registry data have shown no decrease in risk of aseptic revision of PMMA pre-coated tibial components compared with non-pre-coated implants. The aim of this retrieval study was to compare the amount of cement adhesions, geometry and surface features between the two knee designs and to correlate them with the underlying reason for revision surgery. Methods Retrieval analysis was performed of 15 NexGen® and 8 Persona® fixed-bearing knee implants from the same manufacturer retrieved from two knee revision centres. A photogrammetric method was used to grade the amount of cement attached to the tibial tray backside. The geometry and dimensions of the tibial trays, tray projections and peripheral lips were measured using digital callipers and compared between the two different designs. To measure the surface roughness on the backside of the tibial tray, a contact profilometer was used. To investigate differences between the two designs statistical analyses (t-test) were performed. Results All Persona® trays showed evidence of cement adhesion with a % area of 75.4%; half of the NexGen® trays had cement adhesions, with a mean value of 20%. There was a significant difference in the percentage of area covered by cement between the two designs (p

Background: SPECT/CT distribution patterns in patients with total knee replacements have previously been correlated with factors such as time of implantation, implant type and alignment. It is unknown, however, if an increased and more extended bone tracer uptake (BTU) in SPECT/CT, representing loading of the joint, correlates with findings from retrieval studies. The aim of this study was to further understand this subject. Materials and Methods: 62 retrieved TKA were included. SPECT/CT was performed prior to revision. Quantitative and qualitative medio-lateral comparisons of BTU intensity and distribution in the tibia were performed. Retrieval analysis was performed with a micro-CT method to assess the thickness differences between medial and lateral sides of polyethylene inserts with symmetrical designs. Results: In the subgroup of TKA with asymmetrical SPECT/CT distribution, there was a significant correlation between retrieval and medical imaging data (p = 0.0355): patients showing a more extended BTU in the medial compartment also had a significantly thinner insert in the medial compartment, and vice versa in the lateral side. Conclusion: This is the first study comparing BTU distribution patterns and retrieval findings. Our results support the hypothesis that SPECT/CT is able to identify bone activity due to implant position and loading.

Abstract We aimed to determine if gluteus maximus (GMAX) fat infiltration is associated with different levels of physical activity. Identifying and quantifying differences in the intramuscular fat content of GMAX in subjects with different levels of physical activity can provide a new tool to evaluate hip muscles health. This was a cross-sectional study involving seventy subjects that underwent Dixon MRI of the pelvis. The individuals were divided into four groups by levels of physical activity, from low to high: inactive patients due to hip pain; and low, medium and high physical activity groups of healthy subjects (HS) based on hours of exercise per week. We estimated the GMAX intramuscular fat content for each subject using automated measurements of fat fraction (FF) from Dixon images. The GMAX volume and lean volume were also measured and normalized by lean body mass. The effects of body mass index (BMI) and age were included in the statistical analysis. The patient group had a significantly higher FF than the three groups of HS (median values of 26.2%, 17.8%, 16.7% and 13.7% respectively, p

Abstract Background With the Persona® knee system a new polyethylene formulation incorporating vitamin-E which aims to reduce oxidation and maintain wear resistance was introduced. Although in-vitro studies have demonstrated positive effects of the vitamin-E antioxidants on UHMWPE, no retrieval study has looked at polyethylene damage of this system yet. It was the aim to investigate the in-vivo performance of this new design, by comparing it with its predecessor in retrieval analysis. Methods 15 NexGen® and 8 Persona® fixed-bearing implants from the same manufacturer (Zimmer Biomet) were retrieved from two knee revision centres. For retrieval analysis, a macroscopic analysis of polyethylene using a peer-reviewed damage grading method was used (Hood-score). The roughness of all articulating metal components was measured using a contact profilometer. The reason(s) for TKA revision were recorded. Statistical analyses (t-test) were performed to investigate differences between the two designs. Results The mean Hood score for Persona® inserts was 109.3 and for NexGen® 115.1 without significant differences between the two designs. Results from the profilometer revealed that Persona® and NexGen® femoral implants showed an identical mean surface roughness of 0.14 μm. The Persona® tibial tray showed a significantly smoother surface (0.06 μm) compared to the NexGen® (0.2 μm; p

Aims: Acetabular edge-loading was a cause of increased wear rates in metal-on-metal hip arthroplasties, ultimately contributing to their failure. Although such wear patterns have been regularly reported in retrieval analyses, this study aimed to determine their in vivo location and investigate their relationship with acetabular component positioning. Methods: 3D CT imaging was combined with a recently validated method of mapping bearing surface wear in retrieved hip implants. The asymmetrical stabilizing fins of Birmingham hip replacements (BHRs) allowed the co-registration of their acetabular wear maps and their computational models, segmented from CT scans. The in vivo location of edge-wear was measured within a standardized coordinate system, defined using the anterior pelvic plane. Results: Edge-wear was found predominantly along the superior acetabular edge in all cases, while its median location was 8° (interquartile range (IQR) -59° to 25°) within the anterosuperior quadrant. The deepest point of these scars had a median location of 16° (IQR -58° to 26°), which was statistically comparable to their centres (p = 0.496). Edge-wear was in closer proximity to the superior apex of the cups with greater angles of acetabular inclination, while a greater degree of anteversion influenced a more anteriorly centred scar. Conclusion: The anterosuperior location of edge-wear was comparable to the degradation patterns observed in acetabular cartilage, supporting previous findings that hip joint forces are directed anteriorly during a greater portion of walking gait. The further application of this novel method could improve the current definition of optimal and safe acetabular component positioning.

Aims: The aim of this study was to present the first retrieval analysis findings of PRECICE STRYDE intermedullary nails removed from patients, providing useful information in the post-market surveillance of these recently introduced devices. Methods: We collected ten nails removed from six patients, together with patient clinical data and plain radiograph imaging. We performed macro- and microscopic analysis of all surfaces and graded the presence of corrosion using validated semiquantitative scoring methods. We determined the elemental composition of surface debris using energy dispersive x-ray spectroscopy (EDS) and used metrology analysis to characterize the surface adjacent to the extendable junctions. Results: All nails were removed at the end of treatment, having achieved their intended lengthening (20 mm to 65 mm) and after regenerate consolidation. All nails had evidence of corrosion localized to the screw holes and the extendable junctions; corrosion was graded as moderate at the junction of one nail and severe at the junctions of five nails. EDS analysis showed surface deposits to be chromium rich. Plain radiographs showed cortical thickening and osteolysis around the junction of six nails, corresponding to the same nails with moderate – severe junction corrosion. Conclusion: We found, in fully united bones, evidence of cortical thickening and osteolysis that appeared to be associated with corrosion at the extendable junction; when corrosion was present, cortical thickening was adjacent to this junction. Further work, with greater numbers of retrievals, is required to fully understand this association between corrosion and bony changes, and the influencing surgeon, implant, and patient factors involved. Cite this article: Bone Jt Open 2021;2(8):599–610.

Aims: The main advantage of 3D-printed, off-the-shelf acetabular implants is the potential to promote enhanced bony fixation due to their controllable porous structure. In this study we investigated the extent of osseointegration in retrieved 3D-printed acetabular implants. Methods: We compared two groups, one made via 3D-printing (n = 7) and the other using conventional techniques (n = 7). We collected implant details, type of surgery and removal technique, patient demographics, and clinical history. Bone integration was assessed by macroscopic visual analysis, followed by sectioning to allow undecalcified histology on eight sections (~200 µm) for each implant. The outcome measures considered were area of bone attachment (%), extent of bone ingrowth (%), bone-implant contact (%), and depth of ingrowth (%), and these were quantified using a line-intercept method. Results: The two groups were matched for patient sex, age (61 and 63 years), time to revision (30 and 41 months), implant size (54 mm and 52 mm), and porosity (72% and 60%) (p > 0.152). There was no difference in visual bony attachment (p = 0.209). Histological analysis showed greater bone ingrowth in 3D-printed implants (p < 0.001), with mean bone attachment of 63% (SD 28%) and 37% (SD 20%), respectively. This was observed for all the outcome measures. Conclusion: This was the first study to investigate osseointegration in retrieved 3D-printed acetabular implants. Greater bone ingrowth was found in 3D-printed implants, suggesting that better osseointegration can be achieved. However, the influence of specific surgeon, implant, and patient factors needs to be considered.

Pyridoxine-dependent epilepsy is a rare autosomal recessive disease usually associated with neonatal seizures that do not respond to common antiseizure medications but are controlled by pyridoxine administration. Because the symptoms can mimic common neonatal disorders, the diagnosis can be initially missed or delayed. We report a fatal case of a boy who was initially diagnosed with respiratory distress, birth asphyxia, and persistent pulmonary hypertension and whose condition rapidly deteriorated during the first day of life.

Abstract Background 3D Surgical planning has become a key tool in complex hip revision surgery. The restoration of centre of rotation (CoR) of the hips and leg length (LL) are key factors in achieving good clinical outcome. Pelvic imaging is the gold standard for planning and assessment of LL. We aimed to better understand if 3D planning is effective at equalising LL when large acetabular defects are present. Materials and methods This was a prospective case study of 25 patients. We report the analysis of pre-operative LL status and planned LL restoration measured on CT, in relation to the achieved LL measured post-operatively in functional, weight bearing position. Our primary objective was the assessment of restoration of CoR as well as the anatomical and functional LL using biplanar full-length standing low-dose radiographs; our secondary objective was to evaluate the clinical outcome. Results Pre-operative intra-pelvic discrepancy between right and left leg was a mean of 28 mm (SD 17.99, min = 3, max = 60 mm). Post-operatively, the difference between right and left vertical femoral offset (VFO), or CoR discrepancy, was of 7.4 mm on average, significantly different from the functional LL discrepancy (median = 15 mm), p = 0.0024. Anatomical LLD was a median of 15 mm. In one case there was transient foot drop, one dislocation occurred 6 months post-operatively and was treated by closed reduction, none of the patients had had revision surgery at the time of writing. Mean oxford hip score at latest follow up was 32.1/48. Discussion This is the first study to investigate limb length discrepancy in functional position after reconstruction of large acetabular defects. We observed that VFO is not an optimal surrogate for LL when there is significant bone loss leading to length inequality, fixed flexion of the knee and abduction deformity. Conclusions Although challenging, LLD and gait abnormalities can be greatly improved with the aid of an accurate surgical planning. Surgeons and engineers should consider the integration of EOS imaging in surgical planning of reconstruction of large acetabular defects.

Hepatocyte transplantation is a promising treatment for liver failure and inborn metabolic liver diseases, but progress has been hampered by a scarcity of available organs. Here, hepatocytes isolated from livers procured for a neonatal hepatocyte donation program within a research setting were assessed for metabolic function and suitability for transplantation. Organ donation was considered for infants who died in neonatal intensive care in the Stockholm region during 2015–2021. Inclusion was assessed when a decision to discontinue life-sustaining treatment had been made and hepatectomy performed after declaration of death. Hepatocyte isolation was performed by three-step collagenase perfusion. Hepatocyte viability, yield, and function were assessed using fresh and cryopreserved cells. Engraftment and maturation of cryopreserved neonatal hepatocytes were assessed by transplantation into an immunodeficient mouse model and analysis of the gene expression of phase I, phase II, and liver-specific enzymes and proteins. Twelve livers were procured. Median warm ischemia time (WIT) was 190 [interquartile range (IQR): 80–210] minutes. Median viability was 86% (IQR: 71%–91%). Median yield was 6.9 (IQR: 3.4–12.8) x10 6 viable hepatocytes/g. Transplantation into immunodeficient mice resulted in good engraftment and maturation of hepatocyte-specific proteins and enzymes. A neonatal organ donation program including preterm born infants was found to be feasible. Hepatocytes isolated from neonatal donors had good viability, function, and engraftment despite prolonged WIT. Therefore, neonatal livers should be considered as a donor source for clinical hepatocyte transplantation, even in cases with extended WIT.

Abstract Background Modern designs of joint replacements require a large inventory of components to be available during surgery. Pre-operative CT imaging aids 3D surgical planning and implant sizing, which should reduce the inventory size and enhance clinical outcome. We aimed to better understand the impact of the use of 3D surgical planning and Patient Specific Instrumentation (PSI) on hip implant inventory. Methods An initial feasibility study of 25 consecutive cases was undertaken to assess the discrepancy between the planned component sizes and those implanted to determine whether it was possible to reduce the inventory for future cases. Following this, we performed a pilot study to investigate the effect of an optimized inventory stock on the surgical outcome: we compared a group of 20 consecutive cases (experimental) with the 25 cases in the feasibility study (control). We assessed: (1) accuracy of the 3D planning system in predicting size (%); (2) inventory size changes (%); (3) intra and post-operative complications. Results The feasibility study showed variability within 1 size range, enabling us to safely optimize inventory stock for the pilot study. (1) 3D surgical planning correctly predicted sizes in 93% of the femoral and 89% of the acetabular cup components; (2) there was a 61% reduction in the implant inventory size; (3) we recorded good surgical outcomes with no difference between the 2 groups, and all patients had appropriately sized implants. Conclusions 3D planning is accurate in up to 95% of the cases. CT-based planning can reduce inventory size in the hospital setting potentially leading to a reduction in costs.

Abstract Background To assess the relationship between mechanical wear and the failure of the internal lengthening mechanism in retrieved MAGnetic Expansion Control (MAGEC) growing rods. Methods This study included 34 MAGEC rods retrieved from 20 patients. The state of the internal mechanism and mechanical wear were assessed in all the rods using plain radiographs and visual inspection. Metrology was then performed to assess the topography and mechanical wear of the telescopic bars, using a Talyrond 365 (Taylor Hobson, Leicester, UK) roundness measuring machine. Results Plain radiographs showed evidence of a broken internal mechanism in 29% of retrieved rods. Single-side wear marks were found in 97% of retrieved rods. Material loss was found to significantly increase in rods with a damaged internal mechanism (p

Abstract Background 3D Printed custom-made implants constitute a viable option in patients with acetabular Paprosky III defects. In these patients, needing complex hip revision surgery, the appreciation of the bony defect is crucial to assure stable fixation of the customised implant, often intended to replace a failed one. We aimed to understand the effect of metal artefact on the design of customised implants. Methods 26 patients with massive acetabular defects were referred, between May 2016 and September 2018, to our institution classified as “un-reconstructable” by other hospitals. They all received custom 3D-printed acetabular cups. A subset of them underwent two-stage revision surgery due to infection. We then extended the two-stage procedure to the cases where metal artefacts were significantly affecting the reading of the CT scans. CT scans of patients’ pelvises were taken pre and post-implant removal. We assessed for changes in bony shape and volume of the pelvis using 3D imaging software and quantified the effect on implant design with CAD software. Results Eight (out of 26) patients (31%) underwent two-stage revision surgery. The CT bony reconstructions between the two timepoints changed in all cases. The changes were mostly associated to the shape and distribution of the acetabular defects. Three of these cases (37.5%) showed a remarkable difference in the remaining bone that led to a change in implant design. So far, there has been no difference in the clinical outcome between the patients who underwent single (n = 18) and two-stage surgery (n = 8). Conclusions The shape of the acetabulum reconstructed from CT data is potentially altered by metal artefact and bone excised during removal of the failed component. For “end-of-road” acetabular reconstruction, we recommend surgeons consider the use of two-stage surgery to enable a reliable fitting of the complex shape of 3D-printed implants.

Abstract Background Three-dimensional (3D) printing of porous titanium implants is increasing in orthopaedics, promising enhanced bony fixation whilst maintaining design similarities with conventionally manufactured components. Our study is one of the first to non-destructively characterize 3D-printed implants, using conventionally manufactured components as a reference. Methods We analysed 16 acetabular cups retrieved from patients, divided into two groups: ‘3D-printed’ (n = 6) and ‘conventional’ (n = 10). Coordinate-measuring machine (CMM), electron microscopy (SEM) and microcomputed tomography (micro-CT) were used to investigate the roundness of the internal cup surface, the morphology of the backside surface and the morphometric features of the porous structures of the cups, respectively. The amount of bony attachment was also evaluated. Results CMM analysis showed a median roundness of 19.45 and 14.52 μm for 3D-printed and conventional cups, respectively (p = 0.1114). SEM images revealed partially molten particles on the struts of 3D-printed implants; these are a by-product of the manufacturing technique, unlike the beads shown by conventional cups. As expected, porosity, pore size, strut thickness and thickness of the porous structure were significantly higher for 3D-printed components (p = 0.0002), with median values of 72.3%, 915 μm, 498 μm and 1.287 mm (p = 0.0002). The median values of bony attachment were 84.9% and 69.3% for 3D-printed and conventional cups, respectively (p = 0.2635). Conclusion 3D-printed implants are designed to be significantly more porous than some conventional components, as shown in this study, whilst still exhibiting the same shape and size. We found differences in the surface morphologies of the groups, related to the different manufacturing methods; a key finding was the presence of partially molten particles on the 3D-printed cups.

The night has historically been neglected in both disciplinary and interdisciplinary research. To some extent, this is not surprising, given the diurnal bias of human researchers and the difficulty of performing work at night. The night is, however, a critical element of biological, chemical, physical, and social systems on Earth. Moreover, research into social issues such as inequality, demographic changes, and the transition to a sustainable economy will be compromised if the night is not considered. Recent years, however, have seen a surge in research into the night. We argue that “night studies” is on the cusp of coming into its own as an interdisciplinary field, and that when it does, the field will consider questions that disciplinary researchers have not yet thought to ask.

Abstract Background The design freedom allowed by three-dimensional (3D) printing enables the production of acetabular off-the-shelf cups with complex porous structures. The only studies on these designs are limited to clinical outcomes. Our aim was to analyse and compare the designs of different 3D printed cups from multiple manufacturers (Delta TT, Trident II Tritanium and Mpact 3D Metal). Methods We analysed the outer surface of the cups using scanning electron microscopy (SEM) and assessed clinically relevant morphometric features of the lattice structures using micro-computed tomography (micro-CT). Dimensions related to the cup wall (solid, lattice and overall thickness) were also measured. Roundness and roughness of the internal cup surface were analysed with coordinate measuring machine (CMM) and optical profilometry. Results SEM showed partially molten titanium beads on all cups, significantly smaller on Trident II (27 μm vs ~ 70 μm, p

Edge-wear in acetabular cups is known to be correlated with greater volumes of material loss; the location of this wear pattern in vivo is less understood. Statistical shape modelling (SSM) may provide further insight into this. This study aimed to identify the most common locations of wear in vivo, by combining CT imaging, retrieval analysis and SMM. Shape variance was described in 20 retrieved metal-on-metal acetabular surfaces. These were revised after a mean of 90 months, from 13 female and seven male patients. They were positioned with a mean inclination and anteversion of 53° and 30°, respectively. Their orientation, in vivo, was established using their stabilising fins, visible in pre-revision CT imaging. The impact of wear volume, positioning, time, gender and size on the in vivo location of wear was investigated. These surfaces had a mean wear volume of 49.63 mm3. The mean acetabular surface displayed superior edge-wear centred 7° within the posterosuperior quadrant, while more of the volumetric wear occurred in the anterosuperior quadrant. Components with higher inclination had greater superior edge-wear scars, while a relationship was observed between greater anteversion angles and more posterosuperior edge-wear. This SSM method can further our understanding of hip implant function, informing future design and may help to refine the safe zone for implant positioning.

Femoral neck osteotomy creates a critical anatomical landmark for surgeons performing primary Total Hip Arthroplasty (THA); it affects the final height and position of the femoral component. Patient Specific Instrumentation (PSI) has been developed to guide the osteotomy. We aimed to assess the accuracy of a patient-specific (PS) femoral osteotomy guide in primary THA using three-dimensional (3D) computed tomography (CT) analysis. We included pre- and post-operative CT data of 103 THAs. All patients underwent 3D planning to define the optimal femoral neck osteotomy level. Our primary objective was to quantify the discrepancy between the achieved and planned osteotomy level; our secondary objective was to evaluate the clinical outcome. The median (Interquartile Range—IQR) discrepancy between the achieved and planned osteotomy level was 0.3 mm (−1 mm to 2 mm). We found a strong positive correlation between the planned and achieved osteotomy level (R2 = 0.9, p < 0.001). A satisfactory clinical outcome was recorded. Our findings suggest that surgeons can use 3D-printed PS guides to achieve a femoral neck osteotomy with a high level of accuracy to the plan.

Objectives To determine and compare the health status of hip joints of individuals undertaking various lengths of long-distance running and of those who are not running.Methods Fifty-two asymptomatic volunteers underwent bilateral hip 3.0 Tesla MRI: (1) 8 inactive non-runners; (2) 28 moderately active runners (average half a marathon (21 km)/week) and (3) 16 highly active runners (≥ marathon (42 km)/week). Two musculoskeletal radiologists reported the hip MRI findings using validated scoring systems. Study participants completed a Hip disability and Osteoarthritis Outcome Score (HOOS) questionnaire to indicate their perceived hip function.Results The MRI findings show that there were no significant differences among inactive non-runners, moderately active runners and highly active runners in the amount of labral abnormalities (p=0.327), articular cartilage lesions (p=0.270), tendon abnormalities (p=0.141), ligament abnormalities (p=0.519). Bone marrow oedema was significantly more common in moderately active runners than in non-runners and highly active runners (p=0.025), while small subchondral cysts were more common in runners than in non-runners (p=0.017), but these were minor/of small size, asymptomatic and did not indicate specific exercise-related strain. Articular cartilage lesions and bone marrow oedema were not found in highly active runners. HOOS scores indicate no hip symptoms or functional problems among the three groups.Conclusion The imaging findings were not significantly different among inactive non-runners, moderately active runners and highly active runners, in most hip structures, suggesting that long-distance running may not add further damage to the hip joints.

The drivers of coexistence between species with different growth rates are of interest in both ecology and applied microbial science. The authors show, via modelling, that species interactions moderated by consumption or degradation of chemicals can allow coexistence.

Abstract Background Adverse Reaction to Metal Debris (ARMD) is a major reason for revision surgeries in patients with metal-on-metal (MoM) hip replacements. Most failures are related to excessively wearing implant producing harmful metal debris (extrinsic factor). As ARMD may also occur in patients with low-wearing implants, it has been suggested that there are differences in host-specific intrinsic factors contributing to the development of ARMD. However, there are no studies that have directly assessed whether the development of ARMD is actually affected by these intrinsic factors. Methods We included all 29 patients (out of 33 patients) with sufficient data who had undergone bilateral revision of ASR MoM hips (58 hips) at our institution. Samples of the inflamed synovia and/or pseudotumour were obtained perioperatively and sent to histopathological analysis. Total wear volumes of the implants were assessed. Patients underwent MARS-MRI imaging of the hips preoperatively. Histological findings, imaging findings and total wear volumes between the hips of each patient were compared. Results The difference in wear volume between the hips was clinically and statistically significant (median difference 15.35 mm3, range 1 to 39 mm3, IQR 6 to 23 mm3) (p 0.05 for all comparisons). These features included macrophage sheet thickness, perivascular lymphocyte cuff thickness, presence of plasma cells, presence of diffuse lymphocytic infiltration and presence of germinal centers. Conclusions Despite the significantly differing amounts of wear (extrinsic factor) seen between the sides, majority of the histological findings were similar in both hips and the presence of pseudotumour was symmetrical in most hips. As a direct consequence, it follows that there must be intrinsic factors which contribute to the symmetry of the findings, ie. the pathogenesis of ARMD, on individual level. This has been hypothesized in the literature but no studies have been conducted to confirm the hypothesis. Further, as the threshold of metal debris needed to develop ARMD appears to be largely variable based on the previous literature, it is likely that there are between-patient differences in these intrinsic factors, ie. the host response to metal debris is individual.

Cardiovascular disease (CVD) is a global health concern. Vascular dysfunction is an aspect of CVD, and novel treatments targeting vascular physiology are necessary. In the endothelium, eNOS regulates vasodilation and mitochondrial function; both are disrupted in CVD. (–)-Epicatechin, a botanical compound known for its vasodilatory, eNOS, and mitochondrial-stimulating properties, is a potential therapy in those with CVD. We hypothesized that (–)-epicatechin would support eNOS activity and mitochondrial respiration, leading to improved vasoreactivity in a thermoneutral-derived rat model of vascular dysfunction. We housed Wistar rats at room temperature or in thermoneutral conditions for a total of 16 week and treated them with 1mg/kg body weight (–)-epicatechin for 15 day. Vasoreactivity, eNOS activity, and mitochondrial respiration were measured, in addition to the protein expression of upstream cellular signaling molecules including AMPK and CaMKII. We observed a significant improvement of vasodilation in those housed in thermoneutrality and treated with (–)-epicatechin (p < 0.05), as well as dampened mitochondrial respiration (p < 0.05). AMPK and CaMKIIα and β expression were lessened with (–)-epicatechin treatment in those housed at thermoneutrality (p < 0.05). The opposite was observed with animals housed at room temperature supplemented with (–)-epicatechin. These data illustrate a context-dependent vascular response to (–)-epicatechin, a candidate for CVD therapeutic development.

Today the so-called “smart city” is connoted by massive implementation of novel, digital technology, which is often considered as the best solution to global issues affecting contemporary cities. Sophisticated and low-cost technological solutions are developed also in the field of noise monitoring and they are expected to play an important role for acousticians, city planners and policy makers. However, the “smart city” paradigm is controversial: it relies on advanced technological solutions, yet it fails to consider the city as a social construct and it often overlooks the role of citizens, in the quest for technological advances and novel methods. This is especially true in the field of smart acoustic solutions addressing the issue of urban quiet areas: main methods and technologies developed so far barely involve citizens and consider their preferences. This contribution tackles this challenge, by illustrating a novel mixed methodology, which combines the soundscape approach, the citizen science paradigm and a novel mobile application - the Hush City app - with the ultimate goal of involving people in identifying, assessing and planning urban quiet areas. Firstly, the theoretical background and the methods applied are described; secondly initial findings are discussed; thirdly potential impact and future work are outlined.

Abstract Background Adverse Reaction to Metal Debris (ARMD) is still a major reason for revision surgeries in patients with metal-on-metal (MoM) hip replacements. ARMD consists of a wide range of alterations in periprosthetic tissues, most important of which are metallosis, inflammation, pseudotumors and necrosis. Studies investigating histopathological findings and their association to implant wear or indirect measures of wear have yielded inconsistent results. Therefore, we aimed to investigate bearing surface wear volume, whole blood and synovial fluid metal ion concentrations, histopathological findings in periprosthetic tissues and their associations. Methods Seventy-eight patients with 85 hips revised for ARMD were included in the study. Prior to revision surgery, all patients had whole blood chromium and cobalt ion levels assessed. In revision surgery, a synovial fluid sample was taken and analyzed for chromium and cobalt. Periprosthetic tissue samples were taken and analyzed for histopathological findings. Explanted implants were analyzed for bearing wear volume of both acetabular cup and femoral head components. Results Volumetric wear of the failed components was highly variable. The total wear volume of the head and cup had a strong correlation with whole blood chromium and cobalt ion concentrations (Cr: ρ = 0.80, p

Today the so-called “smart city” is connoted by massive implementation of novel, digital technology, which is often considered as the best solution to global issues affecting contemporary cities. Sophisticated and low-cost technological solutions are developed also in the field of noise monitoring and they are expected to play an important role for acousticians, city planners and policy makers. However, the “smart city” paradigm is controversial: it relies on advanced technological solutions, yet it fails to consider the city as a social construct and it often overlooks the role of citizens, in the quest for technological advances and novel methods. This is especially true in the field of smart acoustic solutions addressing the issue of urban quiet areas: main methods and technologies developed so far barely involve citizens and consider their preferences. This contribution tackles this challenge, by illustrating a novel mixed methodology, which combines the soundscape approach, the citizen science paradigm and a novel mobile application - the Hush City app - with the ultimate goal of involving people in identifying, assessing and planning urban quiet areas. Firstly, the theoretical background and the methods applied are described; secondly initial findings are discussed; thirdly potential impact and future work are outlined.

The accuracy of the implant’s post-operative position and orientation in reverse shoulder arthroplasty is known to play a significant role in both clinical and functional outcomes. Whilst technologies such as navigation and robotics have demonstrated superior radiological outcomes in many fields of surgery, the impact of augmented reality (AR) assistance in the operating room is still unknown. Malposition of the glenoid component in shoulder arthroplasty is known to result in implant failure and early revision surgery. The use of AR has many promising advantages, including allowing the detailed study of patient-specific anatomy without the need for invasive procedures such as arthroscopy to interrogate the joint’s articular surface. In addition, this technology has the potential to assist surgeons intraoperatively in aiding the guidance of surgical tools. It offers the prospect of increased component placement accuracy, reduced surgical procedure time, and improved radiological and functional outcomes, without recourse to the use of large navigation or robotic instruments, with their associated high overhead costs. This feasibility study describes the surgical workflow from a standardised CT protocol, via 3D reconstruction, 3D planning, and use of a commercial AR headset, to AR-assisted k-wire placement. Post-operative outcome was measured using a high-resolution laser scanner on the patient-specific 3D printed bone. In this proof-of-concept study, the discrepancy between the planned and the achieved glenoid entry point and guide-wire orientation was approximately 3 mm with a mean angulation error of 5°.

Objective: to investigate the quality of root canal treatments performed by undergraduate students. Methods: 274 root-filled teeth (excluding molars) from the Department of Endodontology of the Federal University of Santa Catarina in a nine-year period were selected and evaluated by two calibrated examiners. The evaluation was based on tooth type, number of root canals, presence or absence curvature, length of filling material considered the radiographic apex as reference (considered adequate shorter than 2mm from radiographic apex), filling material density, filling taper, and overall quality of RCT. Chi-square and Fisher exact tests were performed to analyze associations between variables of interest (p0.05). The factor more frequently identified as unacceptable was filling length (26.6%). All RCT performed in curved teeth and classified as unacceptable were underfilled. Procedural errors, such as perforations or instrumental separation, were not found in this sample. Conclusion: The most common criteria identified as unacceptable was the length of the filling material. Incisors had better quality assessment rates than canines and premolars. The high-quality rates found in this sample may be linked to the professor/student rates.

Accurate quantification of bearing material loss from retrieved metal-on-metal (MOM) hip replacements is key to understanding their failure. Geometric methods are currently the only means of estimating volumetric wear from retrieved implants and numerous contrasting approaches to obtain these measures have been published. Data collection strategies have been thoroughly discussed and refined to minimise the effect of error incurring factors; however, there is an opportunity to optimise the current methods of estimating the pre-wear geometry and, therefore, improve the accuracy of wear volume measurements. An automated analysis strategy to quantify volumetric wear is proposed in this study, which utilises the entire bearing surface to determine the implants pristine geometry. This involves the iterative removal of geometrically effected data points to optimise the fit and size of a perfect sphere. Once fitted, this reference geometry is compared with the measured data, in its entirety, to calculate the volume change representative of the quantity of material lost. Improving the reliability of this parameter could influence the care of a million patients that remain with MOM hip implants. Rigorous validation of this method will dominate future work, ensuring that the accuracy and reliability of this approach are sufficient to provide clinically meaningful data.

The relative contribution of ecological processes in shaping metacommunity dynamics in heavily managed landscapes is still unclear. Here we used two complementary approaches to disentangle the role of environment and spatial effect in farmland bird community assembly in an intensive agro-ecosystem. We hypothesized that the interaction between habitat patches and dispersal should play a major role in such unstable and unpredictable environments. First, we used a metacommunity patterns analysis to characterize species co-occurrences and identify the main drivers of community assembly; secondly, variation partitioning was used to disentangle environmental and geographical factors (such as dispersal limitation) on community structure and composition. We used high spatial resolution data on bird community structure and composition distributed among 260 plots in an agricultural landscape. Species were partitioned into functional classes, and point count stations were classified according to landscape characteristics before applying metacommunity and partitioning analyses within each. Overall we could explain around 20% of the variance in species composition in our system, revealing that stochasticity remains very important at this scale. However, this proportion varies depending on the scale of analysis, and reveals potentially important contributions of environmental filtering and dispersal. These conclusions are further reinforced when the analysis was deconstructed by bird functional classes or by landscape habitat classes, underlining trait-related filters, thus reinforcing the idea that wooded areas in these agroecosystems may represent important sources for a specific group of bird species. Our analysis shows that deconstructing the species assemblages into separate functional groups and types of landscapes, along with a combination of analysis strategies, can help in understanding the mechanisms driving community assembly.

Extremely preterm infants are born with immature lungs and are exposed to an inflammatory environment as a result of oxidative stress. This may lead to airway remodeling, cellular aging and the development of bronchopulmonary dysplasia (BPD). Reliable markers that predict the long-term consequences of BPD in infancy are still lacking. We analyzed two biomarkers of cellular aging and lung function, telomere length and YKL-40, respectively, at 10 years of age in children born preterm with a history of BPD (n = 29). For comparison, these markers were also evaluated in sex-and-age-matched children born at term with childhood asthma (n = 28). Relative telomere length (RTL) was measured in whole blood with qPCR and serum YKL-40 with ELISA, and both were studied in relation to gas exchange and the regional ventilation/perfusion ratio using three-dimensional V/Q-scintigraphy (single photon emission computer tomography, SPECT) in children with BPD. Higher levels of YKL-40 were associated with shorter leukocyte RTL (Pearson’s correlation: −0.55, p = 0.002), but were not associated with a lower degree of matching between ventilation and perfusion within the lung. Serum YKL-40 levels were significantly higher in children with BPD compared to children with asthma (17.7 vs. 13.2 ng/mL, p < 0.01). High levels of YKL-40 and short RTLs were associated to the need for ventilatory support more than 1 month in the neonatal period (p < 0.01). The link between enhanced telomere shortening in childhood and structural remodeling of the lung, as observed in children with former BPD but not in children with asthma at the age of 10 years, suggests altered lung development related to prematurity and early life inflammatory exposure. In conclusion, relative telomere length and YKL-40 may serve as biomarkers of altered lung development as a result of early-life inflammation in children with a history of prematurity.

Osteoarthritis (OA) is one of the most prevalent joint diseases, which causes pain and disability in the adult population. OA affects the osteochondral unit in the joints, which comprises both cartilage and subchondral bone. There has been some progress in understanding the changes in subchondral bone with progression of OA. However, local changes in subchondral bone such as microstructure or volumetric bone mineral density (vBMD) in connection with the defect in cartilage are relatively unexplored. To develop an effective treatment for progression of OA, it is important to understand how the physical environment provided by the subchondral bone affects the overlying cartilage. In this study, we examined the vBMD distribution in the OA joint tissues obtained from total hip replacement surgeries due to OA, using peripheral quantitative CT (pQCT). It was found that there is a significant decrease in vBMD, which co-localizes with the damage in the overlying cartilage. This was not limited to the subchondral bone immediately adjacent to the cartilage defect but continued in the layers below. Bone resorption and cyst formation in the OA tissues were also detected. We observed that the bone surrounding subchondral bone cysts exhibited much higher vBMD than that of the surrounding bones. pQCT was able to detect significant changes in vBMD between OA and non-OA samples, as well as between areas of different cartilage degeneration, which points to its potential as a technique for detection of early OA.

The experiment was carried out to investigate the effect of feed withholding in the very early life ofbird on its compensatory growth capacity and fat parameters. A total of 60 mixed-sexes of one day oldRoss chicks were used in the experiment conducted with completely randomized design of 2 differentfeeding times after hatching, i.e.: T1: given access to feed and water ad libitum immediately afterhatching until 35d of age; and T2: withheld from feed (fasted) but not from water for 48h after hatchingand then fed ad libitum until d35. The birds were weighed at the start of experiment and weeklythereafter, and DWG was then calculated. Feed intakes and FCR were also recorded weekly. At d36,abdominal fat was taken out from 2 birds per pen and was weighed. Breast meat (skinless) from thesame birds was also sampled for total FA analysis. Final BW (d35) and total feed consumption of earlyfastedbirds were 1935.17±43.90 kg and 2745.55±47.48 kg and those of unfasted birds were2019.00±50.85 kg and 2910.84±128.10 kg, respectively. FCR of early-fasted and unfasted birds at d35were 1.42±0.03 and 1.45±0.07. The magnitude difference of DWG between early-fasted and unfastedbirds was 27% at d7, whereas at d35 the difference was only 4.5%. Abdominal fat percentage to live BWof early-fasted birds was 1.65±0.09% (male) and 1.60±0.10% (female) and that of unfasted birds was2.00±0.19% (male) and 1.89±0.38% (female). Total FA contained in meat of early-fasted and unfastedbirds were 0.82±0.10 and 0.85±0.10 g/100gDM. Overall, BW and feed consumption of early-fastedbirds were significantly lower (P0.05) between early-fasted and unfasted birds. Inconclusion, holding birds without feed following hatch (under practical conditions) may limit thecompensatory growth capacity of birds in the later age. Fasting applied in the very early life of broilerleads to impairment of cell hyperplasia resulting in permanent stunting. Abdominal fat and total FAcontained in meat might not be affected by fasting for 48h after hatching. The degree or duration of feedwithholding (for 48h after hatching) might not sufficient to reduce adipocyte proliferation or the numberof precursor adipocytes.

This study was carried out to investigate the effect of different levels of Chlorella sp. in the form ofmeal administrated in the diet of broilers throughout their life upon FA profile of the breast muscle,mucosal secretory IgA (sIgA) concentration and production index (PI) of broiler. Allotted in 18 pens, thetotal of 90 Ross day old chicks were assigned in completely randomized design by 3 of dietarytreatments (T1: control (basal diet without enrichment of Chlorella sp.); T2: basal diet enriched with 5-gChlorella sp./kg feed; T3): basal diet enriched with 10-g Chlorella sp./kg feed. At d-36, skinless breastmeat was collected for FA determination. Practical standard of vaccination was performed to activateantibodies production and at d-36 gut mucosa was collected for sIgA analysis. Chlorella sp.administration had no significant effect (P>0.05) on the FA profile of breast muscle, mucosal sIgAconcentration and producton index of broiler. In conclusion, the level and ratio between n-3 to n-6polyunsaturated fatty acids (PUFA) as well as the nature of dietary PUFA source determine tissue PUFAcomposition. Beside through eicosanoid, Chlorella sp. may affect mucosal sIgA production throughcytokines mediated effect. Although Chlorella sp. administration does not improve the production indexof broiler, this treatment may produce broiler meat with lower fat content.

Three-dimensional (3D) printed titanium orthopaedic implants have recently revolutionized the treatment of massive bone defects in the pelvis, and we are on the verge of a change from conventional to 3D printed manufacture for the mass production of millions of off-the-shelf (non-personalized) implants. The process of 3D printing has many adjustable variables, which taken together with the possible variation in designs that can be printed, has created even more possible variables in the final product that must be understood if we are to predict the performance and safety of 3D printed implants. We critically reviewed the clinical use of 3D printing in orthopaedics, focusing on cementless acetabular components used in total hip arthroplasty. We defined the clinical and engineering rationale of 3D printed acetabular cups, summarized the key variables involved in the manufacturing process that influence the properties of the final parts, together with the main limitations of this technology, and created a classification according to end-use application to help explain the controversial and topical issues. Whilst early clinical outcomes related to 3D printed cups have been promising, in-depth robust investigations are needed, partly because regulatory approval systems have not fully adapted to the change in technology. Analysis of both pristine and retrieved cups, together with long-term clinical outcomes, will help the transition to 3D printing to be managed safely.

OBJETIVO: relatar a experiência de atuação fonoaudiológica para promoção da saúde baseada em visita domiciliar. MÉTODOS: a partir da realização de visitas domiciliares e entrevistas com um morador de cada domicílio visitado foram levantadas demandas gerais ligadas ao processo de saúde-doença, bem como realizadas as orientações e encaminhamentos para os serviços de atenção básica, quando necessário. RESULTADOS: foram visitadas 30 famílias, das quais 27 têm a mulher como principal provedora afetiva e financeira do núcleo familiar; sendo que nenhuma destas mulheres concluiu o ensino fundamental. Em média residem cinco moradores por domicílio, sendo pelo menos, duas crianças e um idoso; 10 das famílias visitadas não possuem, entre os residentes, alguém com trabalho fixo. As crianças costumam frequentar regularmente a escola. Tabagismo e alto índice de abandono dos estudos na adolescência também foram comumente referidos. Dentre as 63 crianças residentes nos domicílios visitados, os atrasos de linguagem e distúrbio fonológico consistem as alterações da comunicação humana mais comumente referidas, assim como o uso de chupeta e/ou mamadeira. Cada visita resultou em breve relato descritivo dos achados, bem como encaminhamentos e orientações realizadas. Sistematicamente foram realizadas discussões para revisão dos encaminhamentos feitos junto à equipe da unidade de saúde. CONCLUSÕES: os distúrbios de linguagem oral foram as alterações fonoaudiológicas mais comumente referidas pela população visitada, assim como a demanda por orientações em relação às funções do sistema sensório-motor-oral. Foram privilegiadas ações de promoção e educação em saúde a partir de visitas domiciliares. A continuação das atividades apresentadas prevê a avaliação da efetividade das ações desenvolvidas.PURPOSE: to report the experience of SLP intervention for health promotion based on domiciliary visits. METHODS: from conducting domiciliary visits and interviews with a local inhabitant of each visited home we raised general demands in the process of health and illness, as well as the counseling and referrals for primary care services whenever needed. RESULTS: 30 families were visited, of which 27 have women as the main emotional and financial provider of the family, and none of these women completed primary school. On average there are five residents per household, with at least 2 children and an elderly, ten visited families do not have one permanent job. Children usually attend school regularly. Smoking and high rate of dropouts in adolescence were also commonly mentioned. Among the 63 children living in the visited homes, delays in language and phonological disorders consist of the most commonly mentioned alterations in human communication, as well as the use of a pacifier and / or bottle. Each visit resulted in a brief descriptive report on the findings, as well as referrals and advice were given. Systematical discussions were held in order to review the referrals made by the basic health unit team. CONCLUSIONS: the oral speech therapy related alterations were the most commonly referred to by the visited population, as well as the demand for guidance on the sensory-motor-oral functions. Focus has been place on health promotion and education based on domiciliary visits. The effectiveness of the actions performed should be evaluated.