Search

Abstract Background Mesenchymal stem cells (MSCs) are widely used in the development of therapeutic tools in regenerative medicine. However, their quality decreases during in vitro expansion because of heterogeneity and acquired cellular senescence. We investigated the potential role of podoplanin (PDPN) in minimizing cellular senescence and maintaining the stemness of tonsil-derived MSCs (TMSCs). Methods TMSCs were isolated from human tonsil tissues using an enzymatic method, expanded, and divided into two groups: early-passaged TMSCs, which were cultured for 3–7 passages, and late-passaged TMSCs, which were passaged more than 15 times. The TMSCs were evaluated for cellular senescence and MSC characteristics, and PDPN-positive and -negative cells were identified by fluorescence-activated cell sorting. In addition, MSC features were assessed in siRNA-mediated PDPN-depleted TMSCs. Results TMSCs, when passaged more than 15 times and becoming senescent, exhibited reduced proliferative rates, telomere length, pluripotency marker (NANOG, OCT4, and SOX2) expression, and tri-lineage differentiation potential (adipogenesis, chondrogenesis, or osteogenesis) compared to cells passaged less than five times. Furthermore, PDPN protein levels significantly decreased in a passage-dependent manner. PDPN-positive cells maintained their stemness characteristics, such as MSC-specific surface antigen (CD14, CD34, CD45, CD73, CD90, and CD105) and pluripotency marker expression, and exhibited higher tri-lineage differentiation potential than PDPN-negative cells. SiRNA-mediated silencing of PDPN led to decreased cell-cycle progression, proliferation, and migration, indicating the significance of PDPN as a preliminary senescence-related factor. These reductions directly contributed to the induction of cellular senescence via p16Ink4a/Rb pathway activation. Conclusion PDPN may serve as a novel biomarker to mitigate cellular senescence in the clinical application of MSCs. Graphical Abstract

Abstract Salivary stones, known as sialoliths, form within the salivary ducts due to abnormal salivary composition and cause painful symptoms, for which surgical removal is the primary treatment. This study explored the role of the salivary microbial communities in the formation of sialoliths. We conducted a comparative analysis of microbial communities present in the saliva and salivary stones, and sequenced the 16S rRNA gene in samples obtained from patients with sialoliths and from healthy individuals. Although the diversity in the saliva was high, the essential features of the microbial environment in sialoliths were low diversity and evenness. The association of microbial abundance between stones and saliva revealed a positive correlation between Peptostreptococcus and Porphyromonas, and a negative correlation for Pseudomonas in saliva. The functional potential differences between saliva and stones Bacterial chemotaxis and the citrate cycle were negatively correlated with most genera found in salivary stone samples. However, the functions required for organic compound degradation did not differ between the saliva samples. Although some microbes were shared between the sialoliths and saliva, their compositions differed significantly. Our study presents a novel comparison between salivary stones and salivary microbiomes, suggesting potential preventive strategies against sialolithiasis.

Far-infrared (FIR) therapy has been extensively studied because of its numerous benefits in improving human health. A planar heating element device was designed to assess the in vitro efficacy of FIR therapy by using a flexible carbon fiber composite sheet (CFS) with versatile designs and shapes. The physical properties were optimized for in vitro assays, and low hygroscopicity and stable thermal performance were obtained through thermoplastic polyurethane (TPU) lamination. The CFS evenly released FIR at temperatures ranging from 25 to 80 °C. There was no significant effect on cell viability under most conditions. However, the FIR emitted from the CFS at 70 and 80 °C for 2 h increased apoptotic cell death. The FIR irradiation between 60 and 80 °C for 1 h or less effectively induced osteogenesis of the tonsil-derived mesenchymal stem cells (TMSCs) without inducing cytotoxicity. The most significant osteogenic induction occurred at 60 and 70 °C, as evidenced by increased calcium mineralization and osteogenic markers. This study demonstrated that CFS efficiently generates the FIR, which induces the osteogenicity of TMSCs at a non-cytotoxic level, suggesting the potential applicability of the CFS device for treating bone diseases such as osteoporosis.

Background: The lack of appropriate mesenchymal stem cells (MSCs) selection methods has given the challenges for standardized harvesting, processing, and phenotyping procedures of MSCs. Genetic engineering coupled with high-throughput proteomic studies of MSC surface markers arises as a promising strategy to identify stem cell-specific markers. However, the technical limitations are the key factors making it less suitable to provide an appropriate starting material for the screening platform. A more accurate, easily accessible approach is required to solve the issues. Methods: This study established a high-throughput screening strategy with forward versus side scatter gating to identify the adipogenesis-associated markers of bone marrow-derived MSCs (BMSCs) and tonsil-derived MSCs (TMSCs). We classified the MSC-derived adipogenic differentiated cells into two clusters: lipid-rich cells as side scatter (SSC)-high population and lipid-poor cells as SSC-low population. By screening the expression of 242 cell surface proteins, we identified the surface markers which exclusively found in lipid-rich subpopulation as the specific markers for BMSCs and TMSCs. Results: High-throughput screening of the expression of 242 cell surface proteins indicated that CD49f and CD146 were specific for BMSCs and TMSCs. Subsequent immunostaining confirmed the consistent specific expression of CD49f and CD146 and in BMSCs and TMSCs. Enrichment of MSCs by CD49f and CD146 surface markers demonstrated that the simultaneous expression of CD49f and CD146 is required for adipogenesis and osteogenesis of mesenchymal stem cells. Furthermore, the fate decision of MSCs from different sources is regulated by distinct responses of cells to differentiation stimulations despite sharing a common CD49f+CD146+ immunophenotype. Conclusions: We established an accurate, robust, transgene-free method for screening adipogenesis associated cell surface proteins. This provided a valuable tool to investigate MSC-specific markers. Additionally, we showed a possible crosstalk between CD49f and CD146 modulates the adipogenesis of MSCs.

Aims: Far-infrared (FIR) irradiation inhibits adipogenic differentiation of tonsil-derived mesenchymal stem cells (TMSCs) by activating Ca2+-dependent protein phosphatase 2B (PP2B), but it stimulates osteogenic differentiation in a PP2B-independent pathway. We investigated the potential involvement of transient receptor potential vanilloid (TRPV) channels, a well-known Ca2+-permeable channel, in the effects of FIR irradiation on adipogenic or osteogenic differentiation of TMSCs. Methods: TMSCs, in the absence or presence of activators or inhibitors, were exposed to FIR irradiation followed by adipogenic or osteogenic differentiation, which was assessed using Oil red O or Alizarin red S staining, respectively. RT-PCR, qRT-PCR, and Western blotting were used to determine gene and protein expression of calcium channels and adipocyte-specific markers. Results: Treatment with the calcium ionophore ionomycin simulated the inhibitory effect of FIR irradiation on adipogenic differentiation but had no effect on osteogenic differentiation, indicating the involvement of intracellular Ca2+ in adipogenic differentiation. Inhibition of pan-TRP channels using ruthenium red reversed the FIR irradiation-induced inhibition of adipogenic differentiation. Among the TRP channels tested, inhibition of the TRPV2 channel by tranilast or siRNA against TRPV2 attenuated the inhibitory effect of FIR irradiation on adipogenic differentiation, accompanied by a decrease in intracellular Ca2+ levels. By contrast, activation of the TRPV2 channel by probenecid simulated FIR irradiation-induced inhibition of adipogenic differentiation. Expectedly, the stimulatory effect of FIR irradiation on osteogenic differentiation was independent of the TRPV2 channel. Conclusion: Our data demonstrate that the TRPV2 channel is a sensor/receptor for the inhibited adipogenic differentiation of TMSCs associated with FIR irradiation.

Our previous study found that the level of CCN1 increases as osteogenic differentiation progresses in tonsil-derived mesenchymal stem cells (TMSCs). This study investigated how CCN1 is regulated through HDAC inhibition in TMSCs and their relationship with osteogenesis. Valproic acid (VPA) (1–5 mM), a well-known histone deacetylase (HDAC) inhibitor, strongly inhibited TMSC proliferation without altering MSC-specific surface markers, CD14, 34, 45, 73, 90 and 105. However, CD146 expression increased at 5 mM VPA. VPA increased osteogenic differentiation of TMSCs but decreased adipogenesis and chondrogenesis, as evidenced by the cell-specific staining of differentiation. The former was validated by the increased osteocalcin (OCN). The changes in CCN1 by VPA was biphasic; it increased until 48 h and decreased thereafter. Knockdown of CCN1 by using siRNA inhibited the osteogenic effect of VPA. VPA had no effect on CCN1 mRNA expression, but inhibition of protein synthesis by cycloheximide showed that VPA slowed down the CCN1 protein degradation. Moreover, overexpression of HDAC1 completely inhibited VPA-induced CCN1. Our results indicate that VPA inhibits the HDAC1, inducing CCN1 protein stability rather than gene expression, thereby promoting osteogenic differentiation of TMSCs. These findings present the noble implication of VPA as an inhibitor of HDAC1 to facilitate CCN1-induced osteogenic differentiation of MSCs.

Hypoparathyroidism is an endocrine disorder that occurs because of the inability to produce parathyroid hormone (PTH) effectively. Previously, we reported the efficacy of tonsil-derived mesenchymal stem cells (TMSCs) differentiated into parathyroid-like cells for the treatment of hypoparathyroidism. Here, we investigated the feasibility of three-dimensional structural microbeads fabricated with TMSCs and alginate, a natural biodegradable polymer, to treat hypoparathyroidism. Alginate microbeads were fabricated by dropping a 2% (w/v) alginate solution containing TMSCs into a 5% CaCl2 solution and then differentiated into parathyroid-like cells using activin A and sonic hedgehog for 7 days. The protein expression of PTH, a specific marker of the parathyroid gland, was significantly higher in differentiated alginate microbeads with TMSCs (Al-dT) compared with in undifferentiated alginate microbeads with TMSCs. For in vivo experiments, we created the hypoparathyroidism animal model by parathyroidectomy (PTX) and implanted alginate microbeads in the dorsal interscapular region. The PTX rats with Al-dT (PTX+Al-dT) showed the highest survival rate and weight change and a gradual increase in serum intact PTH levels. We also detected a higher expression of PTH in retrieved tissues of PTX+Al-dT using immunofluorescence analysis. This study demonstrates that alginate microbeads are potential a new tool as a surgically scalable therapy for treating hypoparathyroidism.

The therapeutic potential of tonsil-derived mesenchymal stem cells (TMSC) prepared from human tonsillar tissue has been studied in animal models for several diseases such as hepatic injury, hypoparathyroidism, diabetes and muscle dystrophy. In this study, we examined the therapeutic effects of TMSC in a dextran sulfate sodium (DSS)-induced colitis model. TMSC were injected in DSS-induced colitis mice via intraperitoneal injection twice (TMSC[x2]) or four times (TMSC[x4]). Control mice were injected with either phosphate-buffered saline or human embryonic kidney 293 cells. Body weight, stool condition and disease activity index (DAI) were examined daily. Colon length, histologic grading, and mRNA expression of pro-inflammatory cytokines, interleukin 1β (IL-1β), IL-6, IL-17 and tumor necrosis factor α, and anti-inflammatory cytokines, IL-10, IL-11 and IL-13, were also measured. Our results showed a significant improvement in survival rates and body weight gain in colitis mice injected with TMSC[x2] or TMSC[x4]. Injection with TMSC also significantly decreased DAI scores throughout the experimental period; at the end of experiment, almost complete reversal of DAI scores to normal was found in colitis mice treated with TMSC[x4]. Colon length was also significantly recovered in colitis mice treated with TMSC[x4]. However, histopathological alterations induced by DSS treatment were not apparently improved by injection with TMSC. Finally, treatment with TMSC[x4] significantly reversed the mRNA levels of IL-1β and IL-6, although expression of all pro-inflammatory cytokines tested was induced in colitis mice. Under our experimental conditions, however, no apparent alterations in the mRNA levels of all the anti-inflammatory cytokines tested were found. In conclusion, our findings demonstrate that multiple injections with TMSC produced a therapeutic effect in a mouse model of DSS-induced colitis.

Ideal hypoparathyroidism animal models are a prerequisite to developing new treatment modalities for this disorder. The purpose of this study was to evaluate the feasibility of a model whereby rats were parathyroidectomized (PTX) using a fluorescent-identification method and the ideal calcium content of the diet was determined. Thirty male rats were divided into surgical sham (SHAM, n = 5) and PTX plus 0, 0.5, and 2% calcium diet groups (PTX-FC (n = 5), PTX-NC (n = 10), and PTX-HC (n = 10), respectively). Serum parathyroid hormone levels decreased to non-detectable levels in all PTX groups. All animals in the PTX-FC group died within 4 days after the operation. All animals survived when supplied calcium in the diet. However, serum calcium levels were higher in the PTX-HC than the SHAM group. The PTX-NC group demonstrated the most representative modeling of primary hypothyroidism. Serum calcium levels decreased and phosphorus levels increased, and bone volume was increased. All animals survived without further treatment and did not show nephrotoxicity including calcium deposits. These findings demonstrate that PTX animal models produced by using the fluorescent-identification method, and fed a 0.5% calcium diet, are appropriate for hypoparathyroidism treatment studies.

In this paper, we present the concept of traceback analysis to identify the origins of non-wet defects caused by hydrophobic unknown nanoparticles in the semiconductor packaging process. Traceback analysis involves five-steps, i.e., practical observation of failure mode, detailed physical and chemical analysis, process investigation, hypothesis establishment, and failure reproduction with comparison. Initially, the morphology and composition of the unknown nanoparticles are analyzed using an optical microscope (OM), field-emission scanning electron microscopy (FE-SEM), contact angle (CA), energy-dispersive spectroscopy (EDS), and Fourier-transform infrared spectroscopy (FT-IR). As a result, spherical unknown nanoparticles with a size of ca. 500 nm consists of organic imidazole-derived materials, similar to the composition of organic solderability preservative (OSP). To identify the origin, printed circuit board (PCB) manufacturing processes are reviewed step-by-step. Traceback analysis identifies that the 1-methoxy-2-propyl acetate (PGMEA) cleaning solvent can form spherical emulsions when mixed with deionized (DI) water during the cleaning process. This can occur when PGMEA and DI water mix in the cleaning bath or recycling pipes, or when leftover PGMEA and DI water mix during next cleaning processes. These PGMEA/DI water form emulsions owing to the polarity differences between hydrophobic PGMEA and hydrophilic DI water and remain on the PCB surface. Thus, organic nanoparticles grow in the PGMEA emulsion on the Cu pad during OSP application for surface finishing purposes. This comprehensive approach ensures a thorough understanding of defect origins. The traceback analysis described in this study, involving five-steps, is applicable not only in semiconductor packaging but also in defect investigation across various industries.

One-dimensional lithium-ion transport channels in lithium iron phosphate (LFP) used as a cathode in lithium-ion batteries (LIBs) result in low electrical conductivity and reduced electrochemical performance. To overcome this limitation, three-dimensional plasma-treated reduced graphene oxide (rGO) was synthesized in this study and used as an additive for LFP in LIB cathodes. Graphene oxide was synthesized using Hummers’ method, followed by mixing with LFP, lyophilization, and plasma treatment to obtain LFP@rGO. The plasma treatment achieved the highest degree of reduction and porosity in rGO, creating ion transfer channels. The structure of LFP@rGO was verified through scanning electron microscopy (SEM) analysis, which demonstrated that incorporating 10.0 wt% of rGO into LFP resulted in successful coverage by the rGO layer, forming LFP@rGO-10. In half-cell tests, LFP@rGO-10 exhibited a specific capacity of 142.7 mAh g−1 at the 1.0 C-rate, which is higher than that of LFP. The full-cell exhibited 86.8% capacity retention after 200 cycles, demonstrating the effectiveness of rGO in enhancing the performance of LFP as an LIB cathode material. The outstanding efficiency and performance of the LFP@rGO-10//graphite cell highlight the promising potential of rGO-modified LFP as a cathode material for high-performance LIBs, providing both increased capacity and stability.

The use of plate-like materials to induce a percolation gel-like effect in electrorheological (ER) fluids is sparsely documented. Hence, we dispersed plate-like materials, namely natural mica, synthetic mica, and glass, as well as their pulverized particles, in various concentrations in silicone oil to form ER fluids. Subsequently, the rheological properties of the fluids were evaluated and compared to identify the threshold concentration for percolating a gel-like state. The shear stress and viscoelastic moduli under zero-field conditions confirmed that plate-like materials can be used to induce percolation gel-like effects in ER fluids. This is because of the high aspect ratio of the materials, which enhances their physical stability. In practical ER investigations, ER fluids based on synthetic mica (30.0 wt%) showed the highest yield stress of 516.2 Pa under an electric field strength of 3.0 kV mm−1. This was attributed to the formation of large-cluster networks and additional polarization induced by the ions. This study provides a practical approach for developing a new type of gel-like ER fluid.

Herein, unique three-dimensional (3D) hierarchically structured carbon nanofiber (CNF)/metal oxide/conducting polymer composite materials were successfully synthesized by combinations of various experimental methods. Firstly, base CNFs were synthesized by carbonization of electrospun PAN/PVP fibers to attain electric double-layer capacitor (EDLC) characteristics. To further enhance the capacitance, tin oxide (SnO2) and iron oxide (Fe2O3) were coated onto the CNFs via facile hydrothermal treatment. Finally, polypyrrole (PPy) was introduced as the outermost layer by a dispersion polymerization method under static condition to obtain 3D-structured CNF/SnO2/PPy and CNF/Fe2O3/PPy materials. With each synthesis step, the morphology and dimension of materials were transformed, which also added the benign characteristic for supercapacitor application. For the practical application, as-synthesized CNF/SnO2/PPy and CNF/Fe2O3/PPy were applied as active materials for supercapacitor electrodes, and superb specific capacitances of 508.1 and 426.8 F g−1 (at 1 A g−1) were obtained (three-electrode system). Furthermore, an asymmetric supercapacitor (ASC) device was assembled using CNF/SnO2/PPy as the positive electrode and CNF/Fe2O3/PPy as the negative electrode. The resulting CNF/SnO2/PPy//CNF/Fe2O3/PPy device exhibited excellent specific capacitance of 101.2 F g−1 (at 1 A g−1). Notably, the ASC device displayed a long-term cyclability (at 2000 cycles) with a retention rate of 81.1%, compared to a CNF/SnO2//CNF/Fe2O3 device of 70.3% without an outermost PPy layer. By introducing the outermost PPy layer, metal oxide detachment from CNFs were prevented to facilitate long-term cyclability of electrodes. Accordingly, this study provides an effective method for manufacturing a high-performance and stable supercapacitor by utilizing unique 3D hierarchical materials, comprised of CNF, metal oxide, and conducting polymer.

In this study, a flexible all-solid-state asymmetric supercapacitor (FASC) device has been successfully fabricated via full recycling of heated tobacco waste (HTW). Tobacco leaves and cellulose acetate tubes have been successfully carbonized (HTW-C) and mixed with metal oxides (MnO2 and Fe3O4) to obtain highly active materials for supercapacitors. Moreover, poly(lactic acid) (PLA) filters have been successfully dissolved in an organic solvent and mixed with the as-prepared active materials using a simple paste mixing method. In addition, flexible MnO2- and Fe3O4-mixed HTW-C/PLA electrodes (C-MnO2/PLA and C-Fe3O4/PLA) have been successfully fabricated using the drop-casting method. The as-synthesized flexible C-MnO2/PLA and C-Fe3O4/PLA electrodes have exhibited excellent electrical conductivity of 378 and 660 μS cm−1, and high specific capacitance of 34.8 and 47.9 mF cm−2 at 1 mA cm−2, respectively. A practical FASC device (C-MnO2/PLA//C-Fe3O4/PLA) has been assembled by employing the C-MnO2/PLA as the positive electrode and C-Fe3O4/PLA as the negative electrode. The as-prepared FASC device showed a remarkable capacitance of 5.80 mF cm−2 at 1 mA cm−2. Additionally, the FASC device manifests stable electrochemical performance under harsh bending conditions, verifying the superb flexibility and sustainability of the device. To the best of our knowledge, this is the first study to report complete recycling of heated tobacco waste to prepare the practical FASC devices. With excellent electrochemical performance, the experiments described in this study successfully demonstrate the possibility of recycling new types of biomass in the future.

Light detection and ranging (LiDAR) sensors utilize a near-infrared (NIR) laser with a wavelength of 905 nm. However, LiDAR sensors have weakness in detecting black or dark-tone materials with light-absorbing properties. In this study, SiO2/black TiO2 core/shell nanoparticles (SBT CSNs) were designed as LiDAR-detectable black materials. The SBT CSNs, with sizes of 140, 170, and 200 nm, were fabricated by a series of Stöber, TTIP sol-gel, and modified NaBH4 reduction methods. These SBT CSNs are detectable by a LiDAR sensor and, owing to their core/shell structure with intrapores on the shell (ca. 2–6 nm), they can effectively function as both color and NIR-reflective materials. Moreover, the LiDAR-detectable SBT CSNs exhibited high NIR reflectance (28.2 R%) in a monolayer system and true blackness (L* < 20), along with ecofriendliness and hydrophilicity, making them highly suitable for use in autonomous vehicles.

Herein, the electrorheological (ER) performances of ER fluids were correlated with their colors to allow for the visual selection of the appropriate fluid for a specific application using naked eyes. A series of TiO2-coated synthetic mica materials colored white, yellow, red, violet, blue, and green (referred to as color mica/TiO2 materials) were fabricated via a facile sol–gel method. The colors were controlled by varying the thickness of the TiO2 coating layer, as the coatings with different thicknesses exhibited different light interference effects. The synthesized color mica/TiO2 materials were mixed with silicone oil to prepare colored ER fluids. The ER performances of the fluids decreased with increasing thickness of the TiO2 layer in the order of white, yellow, red, violet, blue, and green materials. The ER performance of differently colored ER fluids was also affected by the electrical conductivity, dispersion stability, and concentrations of Na+ and Ca2+ ions. This pioneering study may provide a practical strategy for developing new ER fluid systems in future.