Search

IntroductionTo address issues related to shallow soil tillage, low soil nutrient content, and single tillage method in maize production in the Western Inner Mongolia Region, this study implemented various tillage and straw return techniques, including strip cultivation, subsoiling, deep tillage, no-tillage, straw incorporation with strip cultivation, straw incorporation with subsoiling, straw incorporation with deep tillage, and straw incorporation with no tillage, while using conventional shallow spinning by farmers as the control.MethodsWe employed Xianyu 696 (XY696) and Ximeng 6 (XM6) as experimental materials to assess maize 100-grains weight, grain filling rate parameters, and grain nutrient quality. This investigation aimed to elucidate how tillage and straw return influence the accumulation of grain material in different maize varieties.Results and discussionThe results indicated that proper implementation of tillage and straw return had a significant impact on the 100-grains weight of both varieties. In comparison to CK (farmer’s rotary rotation), the most notable rise in 100-grains weight was observed under the DPR treatment (straw incorporation with deep tillage), with a maximum increase of 4.84% for XY696 and 6.28% for XM6. The proper implementation of tillage and straw return in the field resulted in discernible differences in the stages of improving the grain filling rates of different maize varieties. Specifically, XY696 showed a predominant increase in the filling rate during the early stage (V1), while XM6 exhibited an increase in the filling rates during the middle and late stages (V2 and V3). In comparison to CK, V1 increased by 1.54% to 27.56% in XY696, and V2 and V3 increased by 0.41% to 10.42% in XM6 under various tillage and straw return practices. The proper implementation of tillage and straw return had a significant impact on the nutritional quality of the grains in each variety. In comparison to CK, the DPR treatment resulted in the most pronounced decrease in the soluble sugar content of grains by 25.43% and the greatest increase in the crude fat content of grains by 9.67%.ConclusionUltimately, the proper implementation of soil tillage and straw return facilitated an increase in grain crude fat content and significantly boosted grain weight by improving the grouting rate parameters at all stages for various maize varieties. Additionally, the utilization of DPR treatment proved to be more effective. Overall, DPR is the most promising strategy to improve maize yield and the nutritional quality of grain in the long term in the Western Inner Mongolia Region.

IntroductionAutotetraploid rice holds high resistance to abiotic stress and substantial promise for yield increase, but it could not be commercially used because of low fertility. Thus, our team developed neo-tetraploid rice with high fertility and hybrid vigor when crossed with indica autotetraploid rice. Despite these advances, the molecular mechanisms underlying this heterosis remain poorly understood.MethodsAn elite indica autotetraploid rice line (HD11) was used to cross with neo-tetraploid rice, and 34 hybrids were obtained to evaluate agronomic traits related to yield. WE-CLSM, RNA-seq, and CRISPR/Cas9 were employed to observe endosperm structure and identify candidate genes from two represent hybrids. Results and discussionThese hybrids showed high seed setting and an approximately 55% increase in 1000-grain weight, some of which achieved grain yields comparable to those of the diploid rice variety. The endosperm observations indicated that the starch grains in the hybrids were more compact than those in paternal lines. A total of 119 seed heterosis related genes (SHRGs) with different expressions were identified, which might contribute to high 1000-grain weight heterosis in neo-tetraploid hybrids. Among them, 12 genes had been found to regulate grain weight formation, including OsFl3, ONAC023, OsNAC024, ONAC025, ONAC026, RAG2, FLO4, FLO11, OsISA1, OsNF-YB1, NF-YC12, and OsYUC9. Haplotype analyses of these 12 genes revealed the various effects on grain weight among different haplotypes. The hybrids could polymerize more dominant haplotypes of above grain weight regulators than any homozygous cultivar. Moreover, two SHRGs (OsFl3 and SHRG2) mutants displayed a significant reduction in 1000-grain weight and an increase in grain chalkiness, indicating that OsFl3 and SHRG2 positively regulate grain weight. Our research has identified a valuable indica autotetraploid germplasm for generating strong yield heterosis in combination with neo-tetraploid lines and gaining molecular insights into the regulatory processes of heterosis in tetraploid rice.

Enlarging the lateral space of drip tubes saves irrigation equipment costs (drip tubes and bypass), but it will lead to an increased risk of grain yield heterogeneity between wheat rows. Adjusting wheat row spacing is an effective cultivation measure to regulate a row’s yield heterogeneity. During a 2-year field experiment, we investigated the variations in yield traits and photosynthetic physiology by utilizing two different water- and fertilizer-demanding spring wheat cultivars (NS22 and NS44) under four kinds of drip irrigation patterns with different drip tube lateral spacing and wheat row spacing [① TR4, drip tube spacing (DTS) was 60 cm, wheat row horizontal spacing (WRHS) was 15 cm; ② TR6, DTS was 90 cm, WRHS was 15 cm; ③ TR6L, DTS was 90 cm, WRHS was 10 cm, inter-block spacing (IBS) was 35 cm; and ④ TR6S, DTS was 80 cm, WRHS was 10 cm, IBS was 25 cm]. The results showed that under 15-cm equal row spacing condition, after the number of wheat rows served by a single tube increased from four (TR4, control) to six (TR6), NS22 and NS44 exhibited a marked decline in yield. The decline of NS22 (9.93%) was higher than that of NS44 (9.04%), and both cultivars also showed a greater decrease in grain weight and average grain-filling rate (AGFR) of inferior grains (NS22: 23.19%, 13.97%; NS44: 7.78%, 5.86%) than the superior grains (NS22: 10.60%, 8.33%; NS44: 4.89%, 4.62%). After the TR6 was processed to narrow WRHS (from 15 to 10 cm) and add IBS (TR6L: 35 cm; TR6S: 25 cm), the grain weight per panicle (GWP) and AGFR of superior and inferior grains in the third wheat row (RW3) of NS22 and NS44 under TR6L increased significantly by 26.05%, 8.22%, 14.05%, 10.50%, 5.09%, and 5.01%, respectively, and under TR6S, they significantly increased by 20.78%, 9.91%, 16.19%, 9.28%, 5.01%, and 4.14%, respectively. The increase in GWP and AGFR was related to the increase in flag leaf area, net photosynthetic rate, chlorophyll content, relative water content, actual photochemical efficiency of PSII, and photochemical quenching coefficient. Among TR4, TR6, TR6L, and TR6S, for both NS22 and NS44, the yield of TR6S was significantly higher than that of TR6 and TR6L. Furthermore, TR6S showed the highest economic benefit.

The application rate of potassium fertilizer is closely related to the yield of crops. Thin-shelled Tartary buckwheat is a new variety of Tartary buckwheat with the advantages of thin shell and easy shelling. However, little is known about application rate of potassium fertilizer on the yield formation of thin-shelled Tartary buckwheat. This study aimed to clarify the effect of potassium fertilizer on the growth and yield of thin-shelled Tartary buckwheat. A field experiment to investigate the characteristics was conducted across two years using thin-shelled Tartary buckwheat (Miku 18) with four potassium fertilizer applications including 0 (no potassium fertilizer, CK), 15 (low-concentration potassium fertilizer, LK), 30 (medium-concentration potassium fertilizer, MK), and 45 kg·ha−1 (high-concentration potassium fertilizer, HK). The maximum and average grain filling rates; starch synthase activity; superoxide dismutase and peroxidase activities in leaves; root morphological indices and activities; available nitrogen, phosphorus, and organic matter content in rhizosphere soil; urease and alkaline phosphatase activities in rhizosphere soil; plant height, main stem node number, main stem branch number, leaf number; grain number per plant, grain weight per plant, and 100-grain weight increased first and then decreased with the increase in potassium fertilizer application rate and reached the maximum at MK treatment. The content of malondialdehyde was significantly lower in MK treatment than in other three treatments. The yields of thin-shelled Tartary buckwheat treated with LK, MK, and HK were 1.22, 1.37, and 1.07 times that of CK, respectively. In summary, an appropriate potassium fertilizer treatment (30kg·ha−1) can delay the senescence, promote the grain filling, and increase the grain weight and final yield of thin-shelled Tartary buckwheat. This treatment is recommended to be used in production to achieve high-yield cultivation of thin-shelled Tartary buckwheat.

Grain weight and grain shape are important traits that determine rice grain yield and quality. Mining more quantitative trait loci (QTLs) that control grain weight and shape will help to further improve the molecular regulatory network of rice grain development and provide gene resources for high-yield and high-quality rice varieties. In the present study, a QTL for grain length (GL) and grain width (GW), qGL5.2, was firstly fine-mapped into a 21.4 kb region using two sets of near-isogenic lines (NILs) derived from the indica rice cross Teqing (TQ) and IRBB52. In the NIL populations, the GL and ratio of grain length to grain width (RLW) of the IRBB52 homozygous lines increased by 0.16–0.20% and 0.27–0.39% compared with the TQ homozygous lines, but GW decreased by 0.19–0.75%. Then, by analyzing the grain weight and grain shape of the knock-out mutant, it was determined that the annotation gene Os05g0551000 encoded a RING-type E3 ubiquitin ligase, which was the cause gene of qGL5.2. The results show that GL and RLW increased by 2.44–5.48% and 4.19–10.70%, but GW decreased by 1.69–4.70% compared with the recipient. Based on the parental sequence analysis and haplotype analysis, one InDel variation located at −1489 in the promoter region was likely to be the functional site of qGL5.2. In addition, we also found that the Hap 5 (IRBB52-type) increased significantly in grain length and grain weight compared with other haplotypes, indicating that the Hap 5 can potentially be used in rice breeding to improve grain yield and quality.

Grain size is a primary determinant of grain weight, which is one of the three essential components of rice grain yield. Mining the genes that control grain size plays an important role in analyzing the regulation mechanism of grain size and improving grain appearance quality. In this study, two closely linked quantitative trait loci (QTL) controlling grain size, were dissected and fine-mapped in a 515.6-kb region on the long arm of chromosome 10 by using six near isogenic line populations. One of them, qGS10.2, which controlled 1000 grain weight (TGW) and grain width (GW), was delimited into a 68.1-kb region containing 14 annotated genes. The Teqing allele increased TGW and GW by 0.17 g and 0.011 mm with the R2 of 12.7% and 11.8%, respectively. The other one, qGL10.2, which controlled grain length (GL), was delimited into a 137.3-kb region containing 22 annotated genes. The IRBB52 allele increased GL by 0.018 mm with the R2 of 6.8%. Identification of these two QTL provides candidate regions for cloning of grain size genes.

CRISPR/Cas9 system has emerged as an efficient tool for sustainable crop improvement. Roots are the “principal hidden organ” that has a crucial function in vascular plants. Receptor-like protein kinase 1 (RPK1) has been reported to regulate root architecture system (RAS), abiotic stress, and yield both in Arabidopsis and rice. We employed a CRISPR/Cas9-based system, namely LR-1 and LR-2 constructs having double guided RNAs transformed via agrobacterium for targeted mutagenesis of TaRPK1 genes to alter the root architecture and hence yield in Triticum aestivum. Sequencing confirmed seven CRISPR/Cas9-based mutated T0 lines of LR-1 constructs and six T0 lines of LR-2 constructs, with an overall mutation efficiency of 41.93%. The T0 plants displayed higher monoallelic mutation compared to the diallelic mutation. 37.5% monoallelic mutation at target site 1 within the D genome by gRNA1 was observed by the LR-1 construct. The LR-2 constructs showed a higher monoallelic mutation frequency of 26.67% at target sites 1 and 2 within A, B, and D genomes. The deletions were mainly short, however longer deletions such as 12d, 17d, 19d, and 20d were detected by gRNA2 of LR-1 construct. Transgenic lines revealed significant alteration in morphology and RSA with a significant increase in number of effective tillers, grain weight, root length, root depth, root volume, and root surface area while reduced root diameter, root angle, and spike length, compared to the wild plants. Tillers and total grain weight increased significantly, suggesting edited lines increased grain production by decreasing spike length. The study validates that CRISPR/Cas9 mediated targeted editing of TaRPK1 is a practical approach for modifying RAS and hence yield enhancement in wheat.

Delays in sowing have significant effects on the grain yield, yield components, and grain protein concentrations of winter wheat. However, little is known about how delayed sowing affects these characteristics at different positions in the wheat spikes. In this study, the effects of sowing date were investigated in a winter wheat cultivar, Shannong 30, which was sown in 2019 and 2020 on October 8 (normal sowing) and October 22 (late sowing) under field conditions. Delayed sowing increased the partitioning of 13C-assimilates to spikes, particularly to florets at the apical section of a spike and those occupying distal positions on the same spikelet. Consequently, the increase in grain number was the greatest for the apical sections, followed by the basal and central sections. No significant differences were observed between sowing dates in the superior grain number in the basal and central sections, while the number in apical sections was significantly different. The number of inferior grains in each section also increased substantially in response to delayed sowing. The average grain weights in all sections remained unchanged under delayed sowing because there were parallel increases in grain number and 13C-assimilate partitioning to grains at specific positions in the spikes. Increases in grain number m–2 resulted in reduced grain protein concentrations as the limited nitrogen supply was diluted into more grains. Delayed sowing caused the greatest reduction in grain protein concentration in the basal sections, followed by the central and apical sections. No significant differences in the reduction of the grain protein concentration were observed between the inferior and superior grains under delayed sowing. In conclusion, a 2-week delay in sowing improved grain yield through increased grain number per spike, which originated principally from an increased grain number in the apical sections of spikes and in distal positions on the same spikelet. However, grain protein concentrations declined in each section because of the increased grain number and reduced N uptake.

Ear photosynthesis plays a key role in wheat photosynthesis during the grain filling stage, particularly under drought stress. Thus, dissecting the responsibilities of the glume and awn in photosynthetic carbon fixation and assimilates transportation during the grain filling stage in spikes is imperative. In this study, the detachment of the glume (DG) and awn (DA) of a wheat variety (Pubing143) was used to estimate their influences on ear photosynthesis and dry matter distribution. Radioactive carbon-14 (14C) isotope was detected by a multifunctional liquid scintillation counting system. The accumulation of 14C assimilates and their contributions to grain weight were then calculated. Under well-watered conditions, ear photosynthesis was reduced by 16.8 % and 46.2 % 25 d after anthesis (DAA) in the de-glumed control (DGC) and de-awned control (DAC) treatments, respectively, compared with the intact ear control (IEC). Under drought stress, ear photosynthesis was reduced by 46 % and 74.2 % at 25 DAA after removing the glume and awn, respectively. Under normal conditions, the number of 14C assimilates of DGC, and DAC was reduced by 14.6 % and 20.9 % in grains at 25 DAA, respectively, compared with the IEC. Compared with IED, the 14C assimilates of DGD, and DAD declined by 17.2 % and 27 %, respectively, in grains at 25 DAA under drought conditions. Under well-watered conditions, the grain weight per pot was reduced by 11.2 % and 25.4 % in the de-glumed control (DGC) and de-awned control (DAC) treatments, respectively, compared with the intact ear control (IEC). The grain weight per pot was further reduced after removing the glume and awn (16 % and 32.2 %, respectively) under drought stress. Furthermore, the awn contribution to grain weight was twice that of the glume. Our results suggest that the glume and awn of ears play prominent roles during grain filling in wheat, especially under drought stress, and that the awn is more crucial than the glume.

IntroductionAbsorption of nutrients from the soil depends on soil moisture, fertilizer application, soil nutrients and other factors. Foliar application of nutrients under water stress is one of the ways to reduce the effect of stress on the quantity and quality of agricultural products. Today, in many countries, a variety of organic acids such as humus fertilizers are used to improve the quantity and quality of crops and orchards. These fertilizers can be used with irrigation, foliar application, hydroponic cultivation, soil application and seed inoculation. One of the objectives of this project was to identify new wheat cultivars tolerant to water stress condition and use micro elements to introduce suitable cultivars and the effect of these elements in increasing grain yield.Materials and methodsIn order to study the effect of foliar application of nutrients on grain yield and grain quality of bread wheat cultivars in conditions of water stress, the field studies were carried out during 2017-2018 and 2018-2019 at the Agricultural Research Station of Miandoab, in West Azerbaijan province, Iran (46º 3´ E, 36º 58´ N, altitude 1142 m). The experiment was performed as a factorial split plot in a randomized complete block design with three replications. Irrigation treatments in the main plots were included stopping irrigation at flowering stage until maturity and full irrigation until seed maturity. Sub-plots were foliar application treatments with zinc, potassium, phosphorus, magnesium and humic acid with four cultivars of wheat included Orum, Zare, Mihan and Heidari Each plot was planted in six rows with a length of four meters and a width of 1.2 meters at row intervals of 20 cm. Foliar application of micro elements was at the time of spike emergence and before flowering. Grain yield in the final harvest stage and removal of half a meter from the beginning and end of each plot was performed by a combine of grain experiments. After final sampling, 30 g of seeds per plot after digestion was used to measure micro elements in the grain using an atomic absorption. Combined analysis of variance of data from two years of study and drawing graphs was performed using MSTATC, SPSS and Excel software.Results and discussionIn this study, foliar application of zinc, increased 1000-grain weight, grain yield, harvest index, iron, manganese, zinc, and copper content in grin under normal irrigation by 9.30, 15.99, 18.30, 35.35, 102.10, 18.34, and 20.45 percent respectively under normal conditions and by 9.73, 4.36, 9.00, 41.81, 65.51, 43.24 and 29.78 percent respectively under drought conditions, Under normal irrigation conditions, foliar application of zinc in Mihan cultivar had the highest 1000-grain weight, grain yield, harvest index, manganese, zinc, and copper content in grain. Under drought stress conditions, the highest 1000-grain weight, grain yield, harvest index, manganese, and zinc content were allocated to foliar application of zinc in the Mihan cultivar. In this study, foliar application with zinc, potassium, phosphorus, and humic acid treatments in Mihan cultivar had equal grin yield and more than the control foliar application under normal irrigation conditions and was able to replace some of the water requirement of plant, Therefore, foliar application of these treatments along with selecting the appropriate cultivar can be a solution to improve the quantitative and qualitative yield of wheat in areas where the plant experiences periods of water deficit stress with different intensities.ConclusionsConsidering the favorable effect of foliar application of nutrients, especially zinc and humic acid on the quality and quantity of wheat grains, it is suggested that extension projects be carried out to transfer these results to farmers. Also, due to higher grain yield and high grain quality of Mihan cultivar, it is suggested that this cultivar gradually replace the previous cultivars.

Wheat is one of the major food crops in the world. Functional validation of the genes in increasing the grain yield of wheat by genetic engineering is essential for feeding the ever-growing global population. This study investigated the role of ABP7, a bHLH transcription factor from maize involved in kernel development, in regulating grain yield-related traits in transgenic wheat. Molecular characterization showed that transgenic lines HB123 and HB287 contained multicopy integration of ABP7 in the genome with higher transgene expression. At the same time, QB205 was a transgenic event of single copy insertion with no significant difference in ABP7 expression compared to wild-type (WT) plants. Phenotyping under field conditions showed that ABP7 over-expressing transgenic lines HB123 and HB287 exhibited improved grain yield-related traits (e.g., grain number per spike, grain weight per spike, thousand-grain weight, grain length, and grain width) and increased grain yield per plot, compared to WT plants, whereas line QB205 did not. In addition, total chlorophyll, chlorophyll a, chlorophyll b, and total soluble sugars were largely increased in the flag leaves of both HB123 and HB287 transgenic lines compared to the WT. These results strongly suggest that ABP7 positively regulates yield-related traits and plot grain yield in transgenic wheat. Consequently, ABP7 can be utilized in wheat breeding for grain yield improvement.

ADP-glucose pyrophosphorylase (AGPase) influences cereal productivity. There are few reports on the function of cytosolic AGPase small subunit in bread wheat (TaAGPS). In the present study, TaAGPS was preferentially expressed in developing endosperm during grain-filling stages in bread wheat. TaAGPS allelic variations were characterized in 143 wheat accessions by PacBio RS II sequencing. Two haplotypes (TaAGPS-7A-TG and TaAGPS-7A-CT) of TaAGPS-7A were identified and corresponding functional markers were developed, whereas no variants of TaAGPS-7B and TaAGPS-7D were detected. TaAGPS-7A was associated with thousand-kernel weight (TKW) by haplotype–trait association analysis in two populations. Near-isogenic lines (NILs) with TaAGPS-7A-TG showed higher TKW and total kernel starch content than those with TaAGPS-7A-CT, owing to the higher AGPase activity of TaAGPS-7A-TG than TaAGPS-7A-CT both in vitro and in vivo. Overexpression of TaAGPS-7A-TG in bread wheat doubled the transcription levels of TaAGPS and increased AGPase activity by 55.7%, resulting in a 3.0-g higher TKW than in the wild type (WT). Knockdown of TaAGPS led to reduced expression of TaAGPS, AGPase activity, and TKW than in the WT. Thus, owing to the 218th amino acid change of Ser to Ala in TaAGPS-7A, the favorable haplotype TaAGPS-7A-TG showed higher AGPase activity, resulting in higher kernel starch content and grain weight. This finding could be applied to increasing starch content and grain weight in bread wheat.

Grain yield in rice is a complex trait and it is controlled by a number of quantitative trait loci (QTL). To dissect the genetic basis of rice yield, QTL analysis for nine yield traits was performed using an F2 population containing 190 plants, which was developed from a cross between Youyidao (YYD) and Sanfenhe (SFH), and each plant in the population evaluated with respect to nine yield traits. In this study, the correlations among the nine yield traits were analyzed. The grain yield per plant positively correlated with six yield traits, except for grain length and grain width, and showed the highest correlation coefficient of 0.98 with the number of filled grains per plant. A genetic map containing 133 DNA markers was constructed and it spanned 1831.7 cM throughout 12 chromosomes. A total of 36 QTLs for the yield traits were detected on nine chromosomes, except for the remaining chromosomes 5, 8, and 9. The phenotypic variation was explained by a single QTL that ranged from 6.19% to 36.01%. Furthermore, a major QTL for grain width and weight, qGW2-1, was confirmed to be newly identified and was narrowed down to a relatively smaller interval of about ~2.94-Mb. Collectively, we detected a total of 36 QTLs for yield traits and a major QTL, qGW2-1, was confirmed to control grain weight and width, which laid the foundation for further map-based cloning and molecular design breeding in rice.

Abstract Grain weight and size, mostly determined by grain length, width and thickness, are crucial traits affecting grain quality and yield in rice. A quantitative trait locus controlling grain length and width in rice, qGS1-35.2, was previously fine-mapped in a 57.7-kb region on the long arm of chromosome 1. In this study, OsPUB3, a gene encoding a U-box E3 ubiquitin ligase, was validated as the causal gene for qGS1-35.2. The effects were confirmed firstly by using CRISPR/Cas9-based mutagenesis and then through transgenic complementation of a Cas9-free knock-out (KO) mutant. Two homozygous KO lines were produced, each having a 1-bp insertion in OsPUB3 which caused frameshift mutation and premature termination. Compared with the recipient and a transgenic-negative control, both mutants showed significant decreases in grain weight and size. In transgenic complementation populations derived from four independent T0 plants, grain weight of transgenic-positive plants was significantly higher than transgenic-negative plants, coming with increased grain length and a less significant decrease in grain width. Based on data documented in RiceVarMap V2.0, eight haplotypes were classified according to six single-nucleotide polymorphisms (SNPs) found in the OsPUB3 coding region of 4695 rice accessions. Significant differences on grain size traits were detected between the three major haplotypes, Hap1, Hap2 and Hap3 that jointly occupy 98.6% of the accessions. Hap3 having the largest grain weight and grain length but intermediate grain width exhibits a potential for simultaneously improving grain yield and quality. In another set of 257 indica rice cultivars tested in our study, Hap1 and Hap2 remained to be the two largest groups. Their differences on grain weight and size were significant in the background of non-functional gse5, but non-significant in the background of functional GSE5, indicating a genetic interaction between OsPUB3 and GSE5. Cloning of OsPUB3 provides a new gene resource for investigating the regulation of grain weight and size.

Biochar is considered as a soil amendment for enhancing crop productivity. However, limited information is available on the residual effect of biochar application on rice grain yield and yield attributes. In this study, a fixed field experiment was conducted in a double rice-cropping system from 2017 to 2019. The dynamics of rice grain yield and yield attributes were monitored in the six growing seasons with 0, 20, and 40 t/ha biochar application. The results showed that the averaged grain yields in the first four seasons were increased by 2.56-16.84% and 6.15-10.77% with 20 and 40 t/ha biochar application. The trend of increased grain yield in rice with biochar application during the first seasons was mainly attributable to an increase in total biomass, panicles per m2 and spikelets per panicle. Nonetheless, the grain yields in the sixth season were not influenced by biochar addition due to decreases in panicles per m2 and spikelets per panicle. Thus, it can be seen that the positive effects of biochar application on rice yield and yield attributes depend on the duration of biochar application.

Grain size is a key component of grain yield in cereals. It is a complex quantitative trait controlled by multiple genes. Grain size is determined via several factors in different plant development stages, beginning with early tillering, spikelet formation, and assimilates accumulation during the pre-anthesis phase, up to grain filling and maturation. Understanding the genetic and molecular mechanisms that control grain size is a prerequisite for improving grain yield potential. The last decade has brought significant progress in genomic studies of grain size control. Several genes underlying grain size and weight were identified and characterized in rice, which is a model plant for cereal crops. A molecular function analysis revealed most genes are involved in different cell signaling pathways, including phytohormone signaling, transcriptional regulation, ubiquitin–proteasome pathway, and other physiological processes. Compared to rice, the genetic background of grain size in other important cereal crops, such as wheat and barley, remains largely unexplored. However, the high level of conservation of genomic structure and sequences between closely related cereal crops should facilitate the identification of functional orthologs in other species. This review provides a comprehensive overview of the genetic and molecular bases of grain size and weight in wheat, barley, and rice, focusing on the latest discoveries in the field. We also present possibly the most updated list of experimentally validated genes that have a strong effect on grain size and discuss their molecular function.

It is crucial to synergistically improve the yield and quality of sweet maize by implementing precise and strategic planting methods. However, a comprehensive understanding of how increasing plant density affects the sweet maize fresh ear yield, grain-filling rate, and grain carbohydrate concentration is not fully understood. Thus, a field experiment was performed using a split-plot design in Southeast China in 2021 and 2022, involving four sweet maize varieties (MT6855 and WT2015 were compact-type varieties, XMT10 and YZ7 were flat-type varieties) and three plant densities (D1: 4.5 plants m−2; D2: 6.0 plants m−2; and D3: 7.5 plants m−2). The results showed that an increasing plant density markedly increased the fresh ear yield of sweet maize varieties (MT6855 and WT2015) over the two years. However, it did not influence the fresh ear yield of XMT10 and YZ7. Across all four varieties in 2021 and 2022, the increasing plant density decreased the sweet maize filled ear length, while it did not affect the grain soluble solid concentration and grain residue ratio. The sweet maize grain weight, the maximum grain-filling rate, and the mean grain-filling rate decreased significantly with the increase in planting density across all four varieties. However, plant density did not significantly affect the grain soluble sugar, sucrose, fructose, and starch concentrations across different varieties at most stages during the grain filling. The current study also found that the sweet maize fresh ear yield was dramatically positively correlated with ears ha−1, grains per ear, grain-filling rate, and grain starch concentration but negatively correlated with the bare plant rate. Notably, a parabolic relationship existed between the fresh ear yield and 100-grain weight. These findings suggest that optimizing the plant density, particularly with compact-type varieties, can improve the sweet maize fresh ear yield without decreasing its quality.

Increasing grain weight under dense planting conditions can further improve maize yield. 6-BA is known to be involved in regulating grain development and influencing grain weight. Maize grain development is closely linked to starch accumulation and hormone levels. In this work, the effects of applying 6-BA at the flowering stage under high density on the grain filling characteristics, starch content, starch synthesis critical enzyme activity, and endogenous hormones levels of maize grains (including inferior grains (IGs) and superior grains (SGs)) of two high-yielding summer maize varieties widely cultivated in China were investigated. The findings indicated that applying 6-BA significantly improved maize yield compared to the control, mainly as a result of increased grain weight due to a faster grain filling rate. Additionally, the activities of enzymes associated with starch synthesis, including sucrose synthase (SuSy), ADP-glucose pyrophosphorylase (AGPase), granule-bound starch synthase (GBSS), soluble starch synthase (SSS), and starch branching enzyme (SBE), were all increased following 6-BA application, thus facilitating starch accumulation in the grains. Applying 6-BA also increased the zeatin riboside (ZR), indole-3-acetic acid (IAA), and abscisic acid (ABA) levels, and reduced the gibberellin (GA3) level in the grains, which further improved grain filling. It is worth noting that IG had a poorer filling process than SG, possibly due to the low activities of critical enzymes for starch synthesis and imbalanced endogenous hormones levels. However, IG responded more strongly to exogenous 6-BA than SG. It appears that applying 6-BA is beneficial in improving filling characteristics, promoting starch accumulation by enhancing the activities of critical enzymes for starch synthesis, and altering endogenous hormones levels in the grains, thus improving grain filling and increasing the final grain weight and yield of maize grown under crowded conditions. These results provide theoretical and technical support for the further utilization of exogenous hormones in high-density maize production.

The source–sink ratio during grain filling is a critical factor that affects crop yield in wheat, and the main objective of this study was to determine the source–sink relations at both the canopy scale and the individual culm level under two nitrogen (N) levels at the post-jointing stage. Nine widely-used cultivars were chosen for analyzing source–sink relations in southwestern China; and three typical cultivars of different plant types were subjected to artificial manipulation of the grain-filling source–sink ratio to supplement crop growth measurements. A field experiment was conducted over two consecutive seasons under two N rates (N+, 150 kg ha−1; N–, 60 kg ha−1), and three manipulations were imposed after anthesis: control (Ct), removal of flag and penultimate leaves (Lr) and removal of spikelets on one side of each spike (Sr). The results showed that the single grain weights in the three cultivars were significantly decreased by Lr and increased by Sr, which demonstrated that wheat grain yield potential seems more source-limited than sink-limited during grain filling, but the source–sink balance was obviously changed by climatic variations and N deficient environments. Grain yield was highly associated with sink capacity (SICA), grain number, biomass, SPAD values, and leaf area index during grain filling, indicating a higher degree of source limitation with an increase in sink capacity. Therefore, source limitation should be taken into account by breeders when SICA is increased, especially under non-limiting conditions. Chuanmai 104, a half-compact type with a mid-sized spike and a long narrow upper leaf, showed relatively better performance in source–sink relations. Since this cultivar showed the characteristics of a lower reduction in grain weight after Lr, a larger increase after Sr, and a lower reduction in post-anthesis dry matter accumulation, then the greater current photosynthesis during grain filling contributed to the grain after source and sink manipulation.

Grain yield is a polygenic trait that can be influenced by environmental factors and genetic compositions at all plant growth stages. Currently, the molecular mechanisms behind the coordination of the interaction between grain yield-related traits remain unknown. In this study, we characterized the function of four STRESS_tolerance and GRAIN_LENGTH (OsSGL) Poaceae ortholog genes that are transcribed into DUF1645 domain-containing proteins in relation to the grain length, grain weight, and drought stress-tolerance of rice. The transgenic plants with overexpressing or heterologous high levels of Poaceae OsSGL ortholog genes exhibited longer grain size than the wild type plants. Larger cells were seen in panicles of the four transgenic lines with paraffin sectioning and scanning electron microscopy analyses. In addition, four Poaceae OsSGL ortholog genes positively affected the drought tolerance of rice. Four transgenic plants displayed higher resistance to drought stress at the seedling and vegetative stages. RNA-sequencing and qRT-PCR results indicated that over- or heterologous-expression of four Poaceae OsSGL ortholog genes also affected the transcriptome of rice plants. These genes may play a role in auxin and cytokinin biosynthesis and their transduction pathways. Taken together, these results suggested that the four OsSGL orthologs have a conserved function in the regulation of stress-tolerance and cell growth by modulating hormonal biosynthesis and signaling.

To study the difference among cytoplasm at the different nitrogen conditions, a research experiment was conducted using five different cytoplasmic male sterile (CMS) hybrid rice with nitrogen levels at N0, N1, N2, and N3; the nitrogen application rates were 0, 90, 180, and 270 kg/ha, from 2018 to 2019. Results showed that among tested cultivars of CMS hybrid rice, JW (J803A × Chenghui727) showed the highest yield in both years for the low nitrogen and high nitrogen treatments. The dry matter accumulation and translation of JW type in nutritive organs were higher than that of others during the low nitrogen level (N1). We concluded that the nutrient translocation within plants organs and dry biomass accumulation were highly dependent on CMS type and nitrogen application. This research indicates that selecting a rice cultivar with greater efficiency of nitrogen is favourable for raising the number of grains per panicle, grain yield, and nitrogen use efficiency. JW cytoplasm displayed great efficiency in low nitrogen, which is a potential cytoplasmic resource.

The assessment of biological and actual grain yields, as well as the results of studying the percentage of realization of biological yields of varieties of wintering oats of various uses cultivated in soil and climatic conditions of the south foothill zone of the Northwest Caucasus, showed the advantage of grain-type varieties. For comparison, the grain yields of 2018 and 2020 were taken. with differences in the amount of precipitation during the most important period of culture development – the grain filling phase. In the conditions of the first year of research, the grain yield of wintering oats was 100–147 g/m2 and it ranged from 288 g/m2 (Guzeripl) to 438 g/m2 (Oshten) in 2019–2020. Biological yield in 2018 was formed at the level of 150–245 g/m2. In more favorable weather conditions in 2020, the level of biological yield varied from 436 g/m2 (Oshten) to 902 g/m2 (Verny). For two years of research, the average value of biological yield was 293–540 g/m2. The number of plants was: 2018 – 100–124 pcs./m2, 2020 – 132–224 pcs./m2. Grain weight varied from 1,3 to 1,8 g (2018), in 2020 it was 2,3–4,9 g. On average, over two years, the number of plants varied from 124 pcs./m2 (Guzeripl) to 174 pcs./m2 (AGU 75), the grain weight was 1,9–3,2 g. Studies have found that the most highly productive varieties are Oshten, AGU 75, Mezmai. The Verny variety is distinguished by a high biological yield of grain, Oshten is characterized by the highest percentage of biological yield realization.

The aim of the study was to examine the impact of microbiological and organic fertilizers on morphological and productive characteristics of triticale during a three-year period (2009/10-2011/12). A two-factorial field experiment was arranged using a randomized block design with four replications. The object of the study was the triticale winter cultivar Odisej, and the following treatments were applied: a control variant without fertilization, microbiological fertilizer "Slavol" (Agrounik Serbia) 5.0 l ha-1 , organic fertilizer "Biohumus Royal offert" (Altamed RS) 3.0 t ha-1 + microbiological fertilizer "Slavol" (Agrounik Serbia) 5.0 l ha-1 . The results showed that the expression of the characteristics was significantly affected by the environment. The lowest values were obtained in the first year when the most unfavourable meteorological conditions were observed. The application of microbiological fertilizer had no impact on the stem length and grain weight per spike, but it significantly increased the number of fertile spikelets (3.7%), spike length (7.7%) and grain yield (18.6%). The combined application of fertilizers provided better results for all the examined characteristics, while in comparison with the control, the differences ranged from 4.3% for the number of fertile spikelets to 46.5% for grain yield. The strongest correlation was determined between the spike length and the number of fertile spikelets (r = 0.939**). The obtained results lead to the conclusion that under variable environmental conditions, the application of fertilizers has a significant impact on morphological and productive characteristics of triticale, and consequently on the stability of this crop production in the organic farming system.

Abstract Grain weight and grain number, the two important yield traits, are mainly determined by grain size and panicle architecture in rice. Herein, we report the identification and functional analysis of OsSPL4 in panicle and grain development of rice. Using CRISPR/Cas9 system, two elite alleles of OsSPL4 were obtained, which exhibited an increasing number of grains per panicle and grain size, resulting in increase of rice yield. Cytological analysis showed that OsSPL4 could regulate spikelet development by promoting cell division. The results of RNA-seq and qRT-PCR validations also demonstrated that several MADS-box and cell-cycle genes were up-regulated in the mutation lines. Co-expression network revealed that many yield-related genes were involved in the regulation network of OsSPL4. In addition, OsSPL4 could be cleaved by the osa-miR156 in vivo, and the OsmiR156-OsSPL4 module might regulate the grain size in rice. Further analysis indicated that the large-grain allele of OsSPL4 in indica rice might introgress from aus varieties under artificial selection. Taken together, our findings suggested that OsSPL4 could be as a key regulator of grain size by acting on cell division control and provided a strategy for panicle architecture and grain size modification for yield improvement in rice.

Rice productivity has considerably improved due to the effective employment of heterosis, but the genetic basis of heterosis for grain shape and weight remains uncertain. For studying the genetic dissection of heterosis for grain shape/weight and their relationship with grain yield in rice, quantitative trait locus (QTL) mapping was performed on 1,061 recombinant inbred lines (RILs), which was developed by crossing xian/indica rice Quan9311B (Q9311B) and Wu-shan-si-miao (WSSM). Whereas, BC1F1 (a backcross F1) was developed by crossing RILs with Quan9311A (Q9311A) combined with phenotyping in Hefei (HF) and Nanning (NN) environments. Overall, 114 (main-effect, mQTL) and 359 (epistatic QTL, eQTL) were identified in all populations (RIL, BC1F1, and mid-parent heterosis, HMPs) for 1000-grain weight (TGW), grain yield per plant (GYP) and grain shape traits including grain length (GL), grain width (GW), and grain length to width ratio (GLWR). Differential QTL detection revealed that all additive loci in RILs population do not show heterotic effects, and few of them affect the performance of BC1F1. However, 25 mQTL not only contributed to BC1F1’s performance but also contributed to heterosis. A total of seven QTL regions was identified, which simultaneously affected multiple grain traits (grain yield, weight, shape) in the same environment, including five regions with opposite directions and two regions with same directions of favorable allele effects, indicating that partial genetic overlaps are existed between different grain traits. This study suggested different approaches for obtaining good grain quality with high yield by pyramiding or introgressing favorable alleles (FA) with the same direction of gene effect at the QTL regions affecting grain shape/weight and grain yield distributing on different chromosomes, or introgressing or pyramiding FA in the parents instead of fixing additive effects in hybrid as well as pyramiding the polymorphic overdominant/dominant loci between the parents and eliminating underdominant loci from the parents. These outcomes offer valuable information and strategy to develop hybrid rice with suitable grain type and weight.

Abstract Background Grain weight and grain shape are important agronomic traits that affect the grain yield potential and grain quality of rice. Both grain weight and grain shape are controlled by multiple genes. The 3,000 Rice Genomes Project (3 K RGP) greatly facilitates the discovery of agriculturally important genetic variants and germplasm resources for grain weight and grain shape. Results Abundant natural variations and distinct phenotic differentiation among the subgroups in grain weight and grain shape were observed in a large population of 2,453 accessions from the 3 K RGP. A total of 21 stable quantitative trait nucleotides (QTNs) for the four traits were consistently identified in at least two of 3-year trials by genome-wide association study (GWAS), including six new QTNs (qTGW3.1, qTGW9, qTGW11, qGL4/qRLW4, qGL10, and qRLW1) for grain weight and grain shape. We further predicted seven candidate genes (Os03g0186600, Os09g0544400, Os11g0163600, Os04g0580700, Os10g0399700, Os10g0400100 and Os01g0171000) for the six new QTNs by high-density association and gene-based haplotype analyses. The favorable haplotypes of the seven candidate genes and five previously cloned genes in elite accessions with high TGW and RLW are also provided. Conclusions Our results deepen the understanding of the genetic basis of grain weight and grain shape in rice and provide valuable information for improving rice grain yield and grain quality through molecular breeding.

Abstract Background In breeding programs, the selection of cultivars with the highest yield potential consisted in the selection of the yield per se, which resulted in cultivars with higher grains per spike (GN) and occasionally increased grain weight (GW) (main numerical components of the yield). In this study, quantitative trait loci (QTL) for GW, GN and spike fertility traits related to GN determination were mapped using two doubled haploid (DH) populations (Baguette Premium 11 × BioINTA 2002 and Baguette 19 × BioINTA 2002). Results In total 305 QTL were identified for 14 traits, out of which 12 QTL were identified in more than three environments and explained more than 10% of the phenotypic variation in at least one environment. Eight hotspot regions were detected on chromosomes 1A, 2B, 3A, 5A, 5B, 7A and 7B in which at least two major and stable QTL sheared confidence intervals. QTL on two of these regions (R5A.1 and R5A.2) have previously been described, but the other six regions are novel. Conclusions Based on the pleiotropic analysis within a robust physiological model we conclude that two hotspot genomic regions (R5A.1 and R5A.2) together with the QGW.perg-6B are of high relevance to be used in marker assisted selection in order to improve the spike yield potential. All the QTL identified for the spike related traits are the first step to search for their candidate genes, which will allow their better manipulation in the future.

Grain appearance is one of the most important attributes of rice. It is determined by grain size, shape, and weight, which in turn influences the rice yield and market value. In this study, QTLs for grain length, grain width, grain length/width ratio, and grain weight were mapped using the high-throughput indica/indica SNP platforms. The population of the mega indica variety IR64 and the high-quality aromatic variety Sadri from Iran was phenotyped. Based on this phenotypic data, plants of 94 F2:3 families including both parents were selected. A linkage map analysis of 210 SNP markers identified 14 QTLs controlling the grain length, grain width, length/width ratio, and 1,000 grain weight. Among these 14, one important region containing the QTLs for all the four studies’ traits was mapped on chromosome 8. It was derived from Sadri for the decreased length/width ratio and increased grain weight. This study demonstrated the speed and efficiency in using multiplex SNP genotyping for QTL analysis. Moreover, this study identified four novel QTLs (qGL8, qTGW8, qLWR8, and qGW8) sharing the same position on chromosome 8 which were linked with grain quality characteristics between one indica and one aromatic variety. It will enable more precise marker-assisted selection for grain weight, shape, and size. Further in-depth studies are required to dissect this region of interest and identify the related gene(s).

Mining novel and less utilized thousand grain weight (TGW) related genes are useful for improving wheat yield. In this study, a recombinant inbred line population from a cross between Zhongkemai 138 (ZKM138, high TGW) and Chuanmai 44 (CM44, low TGW) was used to construct a new Wheat 50K SNP array-derived genetic map that spanned 1,936.59 cM and contained 4, 139 markers. Based on this map, ninety-one quantitative trait loci (QTL) were detected for eight grain-related traits in six environments. Among 58 QTLs, whose superior alleles were contributed by ZKM138, QTgw.cib-6A was a noticeable major stable QTL and was also highlighted by bulked segregant analysis with RNA sequencing (BSR-Seq). It had a pyramiding effect on TGW enhancement but no significant trade-off effect on grain number per spike or tiller number, with two other QTLs (QTgw.cib-2A.2 and QTgw.cib-6D), possibly explaining the excellent grain performance of ZKM138. After comparison with known loci, QTgw.cib-6A was deduced to be a novel locus that differed from nearby TaGW2 and TaBT1. Seven simple sequence repeat (SSR) and thirty-nine kompetitive allele-specific PCR (KASP) markers were finally developed to narrow the candidate interval of QTgw.cib-6A to 4.1 Mb. Only six genes in this interval were regarded as the most likely candidate genes. QTgw.cib-6A was further validated in different genetic backgrounds and presented 88.6% transmissibility of the ZKM138-genotype and a 16.4% increase of TGW in ZKM138 derivatives. And the geographic pattern of this locus revealed that its superior allele is present in only 6.47% of 433 Chinese modern wheat varieties, indicating its potential contribution to further high-yield breeding.

The peculiarities of the formation of yield structure elements in six varieties of winter wheat at different levels of mineral nutrition have been studied. The correlations between the elements of the varieties' yield structure and the grain yield value have been presented. It was found that yield is strongly correlated with such elements of structure as productive tillering, the number of productive stems per m2 and the number of grains in the main ear (r = 0.808876...0.981697). It is shown, that the variety, providing grain yield of 6...7 t/ha, should form the elements of structure of the following parameters: productive tillering – 2,0...2,2; the stem density – 600...650 productive stems per m2; the number of grains in the main ear – 31...33 pieces; the thousand-grain weight – 46...47 g; the weight of a ear grain – 1,15...1,20 g. The purpose of the study was to investigate the role of the main elements of yield structure in the formation of grain yield in the variety profile and under different nutritional conditions in order to justify methods for managing the production process.

Heat stress is a primary constraint to Australia's barley production. In addition to impacting grain yield, it adversely affects physical grain quality (weight and plumpness) and market value. The incidence of heat stress during grain filling is rising with global warming. However, breeding for new superior heat-tolerant genotypes has been challenging due to the narrow window of sensitivity, the unpredictable nature of heat stress, and its frequent co-occurrence with drought stress. Greater scientific knowledge regarding traits and mechanisms associated with heat tolerance would help develop more efficient selection methods. Our objective was to assess 157 barley varieties of contrasting genetic backgrounds for various developmental, agro-morphological, and physiological traits to examine the effects of heat stress on physical grain quality. Delayed sowing (i.e., July and August) increased the likelihood of daytime temperatures above 30°C during grain-filling. Supplementary irrigation of field trials ensured a reduced impact of drought stress. Heat tolerance appeared to be the primary factor determining grain plumpness. A wide variation was observed for heat tolerance, particularly among the Australian varieties. Genotypic variation was also observed for grain weight, plumpness, grain growth components, stay-green and stem water-soluble carbohydrates (WSC) content, and mobilisation under normal and delayed sown conditions. Compared to normal sowing, delayed sowing reduced duration of developmental phases, plant height, leaf size, head length, head weight, grain number, plumpness, grain width and thickness, stem WSC content, green leaf area retention, and harvest index (HI), and increased screenings, grain length, grain-filling rate (GFR), WSC mobilisation efficiency (WSCME), and grain protein content. Overall, genotypes with heavier and plumper grains under high temperatures had higher GFR, longer grain-filling duration, longer green leaf area retention, higher WSCME, taller stature, smaller leaf size, greater HI, higher grain weight/plumpness potentials, and earlier flowering. GFR played a significant role in determining barley grain weight and plumpness under heat-stress conditions. Enhancing GFR may provide a new avenue for improving heat tolerance in barley.

Grain size, grain number per panicle, and grain weight are key agronomic traits that determine grain yield in rice. However, the molecular mechanisms coordinately controlling these traits remain largely unknown. In this study, we identified a major QTL, SMG3, that is responsible for grain size, grain number per panicle, and grain weight in rice, which encodes a MYB-like protein. The SMG3 allele from M494 causes an increase in the number of grains per panicle but produces smaller grain size and thousand grain weight. The SMG3 is constitutively expressed in various organs in rice, and the SMG3 protein is located in the nucleus. Microscopy analysis shows that SMG3 mainly produces long grains by increasing in both cell length and cell number in the length direction, which thus enhances grain weight by promoting cell expansion and cell proliferation. Overexpression of SMG3 in rice produces a phenotype with more grains but reduces grain length and weight. Our results reveal that SMG3 plays an important role in the coordinated regulation of grain size, grain number per panicle, and grain weight, providing a new insight into synergistical modification on the grain appearance quality, grain number per panicle, and grain weight in rice.

Abstract. The aim of this study was to assess the variation in grain quality traits among mutant lines of winter feed barley. Nine mutant lines derived from the advanced breeding line Kt3029 and 10 mutant lines derived from variety GA-Luttrell along with their parent forms were evaluated. The study was conducted at the Institute of Agriculture – Karnobat during the period 2015-2017. Test weight, 1000-grain weight, the content of protein, starch, lysine, fat, ash, and fibre were determined. Significant differences between the mutant lines and the parent forms for the studied traits were observed. Significantly higher protein content compared to parent was found in the grain of mutant lines 22/1-5, 22/2-10 and 22/1-12 from line Kt3029 and 26/1-1, 26/1-3 and 26/2-11 from variety GA-Luttrell. The grain of mutant line 26/2-12 had the best combination of protein and starch. Mutant lines 22/1-11 and 22/1-12 from Kt3029 and 26/1-1, 26/2-1 and 26/2-12 from variety GA-Luttrell showed a good combination between protein content and 1000-grain weight. Those mutant lines can be included in the breeding program for the development of varieties with improved feed quality.

Grain size and flag leaf angle are two important traits that determining grain yield in rice. However, the mechanisms regulating these two traits remain largely unknown. In this study, a rice long grain 5 (lg5) mutant with a large flag leaf angle was identified, and map-based cloning revealed that a single base substitution followed by a 2 bp insertion in the LOC_Os05g40384 gene resulted in larger grains, a larger flag leaf angle, and higher plant height than the wild type. Sequence analysis revealed that lg5 is a novel allele of elongated uppermost internode-1 (EUI1), which encodes a cytochrome P450 protein. Functional complementation and overexpression tests showed that LG5 can rescue the bigger grain size and larger flag leaf angle in the Xiushui11 (XS) background. Knockdown of the LG5 transcription level by RNA interference resulted in elevated grain size and flag leaf angle in the Nipponbare (NIP) background. Morphological and cellular analyses suggested that LG5 regulated grain size and flag leaf angle by promoting cell expansion and cell proliferation. Our results provided new insight into the functions of EUI1 in rice, especially in regulating grain size and flag leaf angle, indicating a potential target for the improvement of rice breeding.

Meteorological factors are one of the important factors that determine maize kernel weight and grain nutritional quality. Analyzing the influence of meteorological factors before and after anthesis on maize kernel weight and nutritional quality components is of great significance for improving corn yield and quality. Therefore, five different maize hybrids and conducted continuous experiments from 2018 to 2021 were selected in this study, to explore the response of maize kernel weight and grain nutritional quality to meteorological factors in different growth periods, and to quantify the linear relationship between grain nutritional quality parameters, grain weight, and meteorological factors. The main results were as follows: the 100-grain weight reached the maximum value of 39.53 g in 2018; the contents of crude protein, total starch, and crude fat in grains reached the maximum in 2018, 2020, and 2018, respectively, which were 9.61%, 69.2%, and 5.1%. Meteorological factors significantly affected the maize grain weight (p < 0.05). Before anthesis, total sunshine duration, average temperature, relative humidity, and the accumulated temperature had strong effects on grain weight. After anthesis, average daily temperature, total rainfall, temperature difference, accumulated temperature, average daily highest temperature, and total sunshine hours had strong effects on grain weight. There was also a significant correlation between grain weight and grain nutritional quality components (p < 0.05). The multivariate polynomial equation analysis revealed that further potential for maize grain weight could be exploited by adjusting the content of each quality component of the kernels under the current test conditions. Meteorological elements can indirectly affect the 100-grain weight through their relationship with the nutritional quality of the grains, with accumulated temperature before anthesis, average temperature after anthesis, and accumulated temperature after anthesis having the greatest indirect effect on the 100-grain weight. Therefore, the effects of pre-anthesis accumulation temperature, post-anthesis average temperature, and post-anthesis accumulation temperature on the nutritional quality of the grains can be harmonized by the application of hybrids of different lengths of vegetation and by adjusting the sowing time in agricultural production. Ultimately, maize grain weight can be increased on the basis of optimizing the content of various quality components in the grains.

We used mutant cipk17 and Nipponbare in field experiments to analyze agronomic traits, photosynthetic parameters, transcriptome, and gene expression. The results demonstrated cytoplasmic localization of OsCIPK17, while GUS allogeneic (A. thaliana) tissue-staining and quantitative analysis showed the gene was expressed in many organs, including flower buds; furthermore, it was involved in root, stem, and leaf growth. Compared to Nipponbare plants, grain filling rate and final grain weight decreased in plants of the knockout mutant owing to a delay in attainment of maximum grain filling rate. Photosystem II (PSII) efficiency was also reduced. Enrichment analysis showed that the functions of differentially expressed genes (DEGs) focused on nucleoside-, nucleotide-, and lipid-binding, as well as hydrolase, transferase, and phosphorylase activities. Signaling pathways mainly included starch and sucrose metabolism, as well as photosynthesis. Additionally, some DEGs were verified by fluorescence analysis. The results showed that knockout of OsCIPK17 affected photosynthesis and starch-, sucrose-, and amino acid metabolism-related gene expression; furthermore, the mutation reduced PSII utilization efficiency, it blocked the synthesis and metabolism of starch and sucrose, and affected the formation and transport of assimilates, thereby reducing final grain weight.

In Algeria, drought affects grain weight and modified its biochemical composition. The present study was conducted to evaluate the effect of two water supplies (100% FC, 30% FC) on grain weight and composition of five genotypes of durum wheat (Triticum durum Desf.). We also examined the effects of shading of peduncle, spike and the entire plant and excision of awns, flag leaves and foliar system on grain weight, starch and amylose/amylopectin ratio. From this study, we found that grain weight was significantly reduced by the application of water deficit. However, this action is greatly related to genotype type. It is admitted that this trait is strongly conditioned by the grain filling process. The morphological characteristics of plants were implicated to grain weight elaboration. Among organs studied, the photosynthetic rate of spick and reserves remobilization from stem announced determinant in grain filling. We found also that starch content which is associated to amylose/amylopectin ratio is strongly related to grain weigh. Finally, grains weight variations were associated to starch content and mainly related to the water supply condition.

Around the world, salinity a critical limiting factor in agricultural productivity. Plant growth is affected by salt stress at all stages of development. The contemporary investigation focused on Chaetomorpha antennina aqueous extracts (SWEs) to decrease the effects of salt strain on rice germination, growth, yield, and the production of key biological and biochemical characters of the rice, Oryza sativa L. (Poaceae). SWE improved the germination capacities of rice seedlings by promoting their emergence 36.27 h prior to those that had been exposed to saline stress. The creation of 79.647% longer radicles by SWE treatment on salt-stressed seeds which boosted the establishment effectiveness of seeds produced under salt stress longer radicles resulted in plants that were 64.8% taller. SWE treatment was effective in revoking the levels of protein (26.9%), phenol (35.54%), and SOD (41.3%) enzyme levels that were previously constrained by salinity stress. Additionally, SWE were also efficient in retaining 82.6% of leaf water content and enhancing the production of photosynthetic pigments affected by salt exposure earlier. The improvement in plant functionality was evident from the display of increase in tiller numbers/hill (62.36%), grain yield (58.278%), and weight (56.502%). The outcome of our research shows that SWEs protected the plants from the debarring effects of salinity by enhancing the plant functionality and yield by mechanistically enriching their physiological (germination and vegetative growth) and biochemical attributes (leaf RWC, photosynthetic pigments, protein, phenol, and SOD). Despite the increase in TSS and starch levels in rice grain exposed to salinity stress, SWE improved the grain protein content thus cumulatively enhancing rice nutrition and marketability. The current investigation reveals that the extracts of C. antennina can help alleviate rice plants from salt stress in an efficient, eco-friendly, as well as economical way.

Grain weight is one of the major factors determining single plant yield production of rice and other cereal crops. Research has begun to reveal the regulatory mechanisms underlying grain weight as well as grain size, highlighting the importance of this research for plant molecular biology. The developmental trait of grain weight is affected by multiple molecular and genetic aspects that lead to dynamic changes in cell division, expansion and differentiation. Additionally, several important biological pathways contribute to grain weight, such as ubiquitination, phytohormones, G-proteins, photosynthesis, epigenetic modifications and microRNAs. Our review integrates early and more recent findings, and provides future perspectives for how a more complete understanding of grain weight can optimize strategies for improving yield production. It is surprising that the acquired wealth of knowledge has not revealed more insights into the underlying molecular mechanisms. To accelerating molecular breeding of rice and other cereals is becoming an emergent and critical task for agronomists. Lastly, we highlighted the importance of leveraging gene editing technologies as well as structural studies for future rice breeding applications.

The development of low-nitrogen (N) tolerant varieties is an effective way to improve the use efficiency of N in rice and is crucial to the sustainable rice production in China. Recently, we observed that higher grain yields were obtained in the hybrid rice variety Deyou 4727 (DY4727) than in the hybrid rice variety Y-liangyou 900 (YLY900) under zero-N fertilization conditions, suggesting that DY4727 has higher low-N tolerance compared to YLY900. In this study, field experiments were performed in 2020 and 2021 to compare the responses of yield attributes to N fertilization (180 kg N ha–1) relativized to zero-N fertilization between DY4727 and YLY900. Results showed that the response of grain yield to N fertilization was 13–55% for two varieties in two years. DY4727 had lower response of grain yield to N fertilization than YLY900 by 47% in 2020 and by 70% in 2021. There were no significant or consistent differences in responses of spikelets per m2, spikelet filling percentage, aboveground biomass, intercepted radiation, radiation use efficiency, and aboveground N uptake to N fertilization between DY4727 and YLY900. DY4727 had 32% and 26% lower positive response of grain weight to N fertilization compared to YLY900 in 2020 and 2021, respectively. The response of harvest index to N fertilization was negative (−3% in 2020 and −9% in 2021) for DY4727 but positive (1% in 2020 and 12% in 2021) for YLY900. DY4727 had higher negative response of internal N-use efficiency to N fertilization (−41% in 2020 and −24% in 2021) than YLY900 (−11% in 2020 and −10% in 2021). This study suggests that grain weight, harvest index, and internal N-use efficiency are key traits determining the difference in response of grain yield to N fertilization between DY4727 and YLY900.

Grain size, shape and weight are important factors influencing grain yield and quality of rice. They are mostly determined by grain length (GL) and grain width (GW). A 13.2 Mb interval, RM167–RM287 on chromosome 11 of rice, was previously found to be associated with variations in 1000-grain weight (TGW). In this study, three populations derived from the indica rice cross Teqing/IRBB52 were used to identify and validate quantitative trait loci (QTLs) controlling GL, GW, TGW and the ratio of GL to GW (RLW) in the RM167–RM287 region. First, two QTL clusters associated with these traits were detected using two populations, segregating the RM167–RM287 interval only. One controlled GL, GW and TGW and was designated as qGS11. The other controlled GL and RLW. The allelic directions of the two QTL clusters on GL were opposite. Then, qGS11 was further mapped in a 1.4 Mb interval using near-isogenic lines, showing a small effect on GL and a relatively large effect on TGW, GW and RLW. Meanwhile, a stable and small effect on the heading date was detected. The allelic direction for the heading date was the opposite for TGW and GW but the same for GL and RLW. The results suggest that qGS11 has the potential for application in rice breeding.

Heat stress during the preflowering panicle initiation stage seriously decreases rice grain weight in an invisible way and has not been given enough attention. The current review aims to (i) specify the heat effects on rice grain weight during the panicle initiation stage compared with the most important grain-filling stage; and (ii) discuss the physiological mechanisms of the decreased rice grain weight induced by heat during panicle initiation in terms of assimilate supply and phytohormone regulation, which are key physiological processes directly regulating rice grain weight. We emphasize that the effect of heat during the panicle initiation stage on rice grain weight is more serious than that during the grain-filling stage. Heat stress during the panicle initiation stage induces alterations in endogenous phytohormones, leading to the inhibition of the photosynthesis of functional leaves (source) and the formation of vascular bundles (flow), thus reducing the accumulation and transport of nonstructural carbohydrates and the growth of lemmata and paleae. The disruptions in the “flow” and restrictions in the preanthesis “source” tissue reduce grain size directly and decrease grain plumpness indirectly, resulting in a reduction in the final grain weight, which could be the direct physiological causes of the lower rice grain weight induced by heat during the panicle initiation stage. We highlight the seriousness of preflowering heat stress on rice grain weight, which can be regarded as an invisible disaster. The physiological mechanisms underlying the lower grain weight induced by heat during panicle initiation show a certain novelty because they distinguish this stage from the grain-filling stage. Additionally, a number of genes that control grain size through phytohormones have been summarized, but their functions have not yet been fully tested under heat conditions, except for the Grain Size and Abiotic stress tolerance 1 (GSA1) and BRASSINOSTEROID INSENSITIVE1 (OsBRI1) genes, which are reported to respond rapidly to heat stress. The mechanisms of reduced rice grain weight induced by heat during the panicle initiation stage should be studied in more depth in terms of molecular pathways.

Grain weight is a key trait that determines rice quality and yield, and it is primarily controlled by quantitative trait loci (QTL). Recently, attention has been paid to minor QTLs. A minor effect QTL qTGW7 that controls grain weight was previously identified in a set of chromosomal fragment substitution lines (CSSLs) derived from Nipponbare (NPB)/93-11. Compared to NPB, the single segment substitution line (SSSL) N83 carrying the qTGW7 introgression exhibited an increase in grain length and width and a 4.5% increase in grain weight. Meanwhile, N83 was backcrossed to NPB to create a separating population, qTGW7b, a QTL distinct from qTGW7, which was detected between markers G31 and G32. Twelve near-isogenic lines (NILs) from the BC9F3 population and progeny of five NILs from the BC9F3:4 population were genotyped and phenotyped, resulting in the fine mapping of the minor effect QTL qTGW7b to the approximately 86.2-kb region between markers G72 and G32. Further sequence comparisons and expression analysis confirmed that five genes, including Os07g39370, Os07g39430, Os07g39440, Os07g39450, and Os07g39480, were considered as the candidate genes underlying qTGW7b. These results provide a crucial foundation for further cloning of qTGW7b and molecular breeding design in rice.

The primary goal of common wheat (T. aestivum) breeding is increasing yield without negatively impacting the agronomic traits or product quality. Genetic approaches to improve the yield increasingly target genes that impact the grain weight and number. An energetic trade-off exists between the grain weight and grain number, the result of which is that most genes that increase the grain weight also decrease the grain number. QTL associated with grain weight and number have been identified throughout the hexaploid wheat genome, leading to the discovery of numerous genes that impact these traits. Genes that have been shown to impact these traits will be discussed in this review, including TaGNI, TaGW2, TaCKX6, TaGS5, TaDA1, WAPO1, and TaRht1. As more genes impacting the grain weight and number are characterized, the opportunity is increasingly available to improve common wheat agronomic yield by stacking the beneficial alleles. This review provides a synopsis of the genes that impact grain weight and number, and the most beneficial alleles of those genes with respect to increasing the yield in dryland and irrigated conditions. It also provides insight into some of the genetic mechanisms underpinning the trade-off between grain weight and number and their relationship to the source-to-sink pathway. These mechanisms include the plant size, the water soluble carbohydrate levels in plant tissue, the size and number of pericarp cells, the cytokinin and expansin levels in developing reproductive tissue, floral architecture and floral fertility.

There is concern over the impact of global warming on rice production due increased heat stress, coupled with decreased relative humidity (RH). It is unknown how rice yield and quality are affected by heat stress and decreased RH during the grain filling stage. We conducted experiments in controlled growth chambers on six rice cultivars, varying in heat tolerance using 12 combinative treatments of three factors: two RH levels (75% and 85%), three temperature levels (the daily maximum temperature at 33 °C, 35 °C, and 37 °C), and two durations (8 d and 15 d after anthesis). Results showed that RH75% with temperature treatments significantly reduced grain weight, which was higher than RH85%. The same trend was also observed for both head rice rate and chalkiness. R168 was the most heat-tolerant cultivar, but it still had some differences in grain weight, head rice rate, and chalkiness between the two RH regimes. The lower RH was most detrimental at 35 °C, and to a lesser extent at 33 °C, but had a negligible effect at 37 °C. Our results provide a better understanding of temperature and RH’s interaction effects on rice quality during the grain filling stage, suggesting that RH should be considered in heat tolerance screening and identification to facilitate rice breeding and genetic improvement.

The current lack of efficient methods for high throughput field phenotyping is a constraint on the goal of increasing durum wheat yields. This study illustrates a comprehensive methodology for phenotyping this crop's water use through the use of the two-source energy balance (TSEB) model employing very high resolution imagery. An unmanned aerial vehicle (UAV) equipped with multispectral and thermal cameras was used to phenotype 19 durum wheat cultivars grown under three contrasting irrigation treatments matching crop evapotranspiration levels (ETc): 100%ETc treatment meeting all crop water requirements (450 mm), 50%ETc treatment meeting half of them (285 mm), and a rainfed treatment (122 mm). Yield reductions of 18.3 and 48.0% were recorded in the 50%ETc and rainfed treatments, respectively, in comparison with the 100%ETc treatment. UAV flights were carried out during jointing (April 4th), anthesis (April 30th), and grain-filling (May 22nd). Remotely-sensed data were used to estimate: (1) plant height from a digital surface model (H, R2 = 0.95, RMSE = 0.18m), (2) leaf area index from multispectral vegetation indices (LAI, R2 = 0.78, RMSE = 0.63), and (3) actual evapotranspiration (ETa) and transpiration (T) through the TSEB model (R2 = 0.50, RMSE = 0.24 mm/h). Compared with ground measurements, the four traits estimated at grain-filling provided a good prediction of days from sowing to heading (DH, r = 0.58–0.86), to anthesis (DA, r = 0.59–0.85) and to maturity (r = 0.67–0.95), grain-filling duration (GFD, r = 0.54–0.74), plant height (r = 0.62–0.69), number of grains per spike (NGS, r = 0.41–0.64), and thousand kernel weight (TKW, r = 0.37–0.42). The best trait to estimate yield, DH, DA, and GFD was ETa at anthesis or during grain filling. Better forecasts for yield-related traits were recorded in the irrigated treatments than in the rainfed one. These results show a promising perspective in the use of energy balance models for the phenotyping of large numbers of durum wheat genotypes under Mediterranean conditions.

Grain size is a major determinant of grain weight, which is one of the components of rice yield. The objective o this study was to identify novel, and important quantitative trait loci (QTLs) for grain size and weight in rice. QTLs were mapped using a BC4F4 population including 192 backcross inbred lines (BILs) derived from a backcross between Xiaolijing (XLJ) and recombinant inbred lines (RILs). The mapping population was planted in both Lingshui (Hainan, 2015) and Fuyang (Zhejiang, 2016), with the short- and long-day conditions, respectively. A total of 10 QTLs for grain length, four for grain width, four for the ratio of grain length to width, and 11 for grain weight were detected in at least one environment and were distributed across 11 chromosomes. The phenotypic variance explained ranged from 6.76–25.68%, 14.30–34.03%, 5.28–26.50%, and 3.01–22.87% for grain length, grain width, the ratio of grain length to width, and thousand grain weight, respectively. Using the sequential residual heterozygotes (SeqRHs) method, qGS7.1, a QTL for grain size and weight, was mapped in a 3.2-Mb interval on chromosome 7. No QTLs about grain size and weight were reported in previous studies in this region, providing a good candidate for functional analysis and breeding utilization.

Abstract Background Diethyl aminoethyl hexanoate (DA-6), a plant growth regulator, has many beneficial effects on agricultural production. DA-6 has been applied to many plant species, but the molecular mechanism by which spraying DA-6 after anthesis regulates wheat grain filling is still unknown. Results In this study, we used four DA-6 concentrations: C0 (0 g/L), C2 (2 g/L), C4 (4 g/L), and C6 (6 g/L). The results showed that C4 and C6 led to a significantly higher 1000-grain weight and seed protein content than C0 during two wheat growing seasons. We then subjected samples at 24 days after anthesis (at which point the grain weight increased rapidly) to transcriptome analysis. Flag leaf (L), seed (S), and stem (T) samples under C6 and C0 were used for RNA-seq. The seed samples under C6 compared with C0 (S6vsS0) presented the most differentially expressed genes (DEGs; 2164). Plant hormone signal transduction (p = 1.97 × 10− 4), protein processing in the endoplasmic reticulum (ER; p = 9.04 × 10− 11) and starch and sucrose metabolism (p = 1.90 × 10− 10) pathways were the most markedly enriched pathways in the flag leaves, stems, and seeds, respectively. DEGs involved in sucrose synthesis in the flag leaves, protein processing in ER in the stems, and starch synthesis and protein processing in ER in the seeds were significantly upregulated under C6 compared with C0. Conclusions Overall, we propose a model for spraying DA-6 after anthesis to regulate metabolic pathways in wheat, which provides new insights into wheat in response to DA-6.

Meiosis is the least explored stage for thermotolerance in wheat. We evaluated the impact of 5 d of moderate transient daily heat stress during meiosis in the main stem spike on physiological and grain yield traits in 30 diverse wheat cultivars which vary widely in heat tolerance and sensitivity. We found that a moderate heat stress event during meiosis in the main stem spike had lasting impacts on plant growth and reproduction in heat-sensitive, but not heat-tolerant, wheat cultivars. Heat-tolerant cultivars maintained grain yield, grain number and individual grain weight in the main stem spike and also total plant grain yield and biomass in the heat stress treatment relative to the control. Heat-sensitive cultivars responded to heat stress by producing fewer and smaller grains per spikelet on the main stem, fewer tillers, lower biomass and lower total plant grain yield in the high temperature treatment relative to the control. Heat-sensitive cultivars produced higher flag leaf chlorophyll content in the high temperature treatment relative to the control than heat-tolerant cultivars during the first 3 d of heat treatment. There was small reduction in pollen viability from 98% to 96% following heat stress during meiosis which was unrelated to heat tolerance or sensitivity. Moderate transient heat stress during meiosis did not greatly reduce the production of viable male gametes, but had long-lasting negative impacts on fertilization and subsequent seed production in heat-sensitive cultivars.

Abstract Background Grain weight (GW) is a key component of sunflower yield and quality, but may be limited by maternal tissues. Cell growth is influenced by expansin proteins that loosen the plant cell wall. This study aimed to identify spatio-temporal expression of EXPN genes in sunflower reproductive organ tissues (ovary, pericarp, and embryo) and evaluate correlations between reproductive organ growth and expansin genes expression. Evaluations involved eight different developmental stages, two genotypes, two source-sink treatments and two experiments. The genotypes evaluated are contrasting in GW (Alybro and confection variety RHA280) under two source-sink treatments (control and shaded) to study the interactions between grain growth and expansin genes expression. Results Ovaries and grains were sampled at pre- and post-anthesis, respectively. Final GW differed between genotypes and shading treatments. Shading treatment decreased final GW by 16.4 and 19.5% in RHA280 and Alybro, respectively. Relative expression of eight expansin genes were evaluated in grain tissues. EXPN4 was the most abundant expansin in the ovary tissue, while EXPN10 and EXPN7 act predominantly in ovary and pericarp tissues, and EXPN1 and EXPN15 in the embryo tissues. Conclusions Specific expansin genes were expressed in ovary, pericarp and embryo in a tissue-specific manner. Differential expression among grain tissues was consistent between genotypes, source-sink treatments and experiments. The correlation analysis suggests that EXPN genes could be specifically involved in grain tissue extension, and their expression could be linked to grain size in sunflower.