Search

The main aim of this study was to evaluate the efficiency of natural zeolite for Cr(VI) removal from aqueous solutions. Following simple modification of adsorbent, the effect of operational parameters including pH (2–10), adsorbent dosage (2–20 g/L), contact time (5–150 min) and Cr(VI) concentration (10–50 mg/L) were studied according to one-factor-at-a-time procedure. The maximum Cr(VI) removal of 99.53% was obtained at initial pH of 2, contact time of 30 min, adsorbent dosage of 8 g/L and initial chromium concentration of 10 mg/L. The Freundlich isotherm was best fitted with experimental data (R2 = 0.951). Also, type 1pseudo second order kinetic model showed the most correlation (R2 = 1) with the experimental data. According to obtained results, it can be concluded that the application of clay-like adsorbents such as natural clinoptilolite zeolite can be considered as an efficient alternative for final treatment of effluents containing Cr(VI).

Thermally activated persulfate efficiency for the treatment of a recalcitrant high TDS wastewater was investigated. The specific character of studied wastewater was high TDS content of around 23820 mg/L and BOD5/COD ratio of 0.07. Effective operational parameters including initial pH values of 3–9, reaction temperature of 40–80°C and persulfate concentrations of 0.5–5 g/L for COD removal were investigated in batch mode experiments. Removal efficiency was pH and temperature dependent. The COD and TOC removal of 94.3% and 82.8% were obtained at persulfate concentration of 4 g/L, initial pH value of 5 and temperature of 70°C after 180 min for initial COD concentration of 1410 mg/L. The pseudo first-order kinetic model was best fitted with COD removal (R2 = 0.94).