Search

Pulp and paper manufacturing ranks as one of the most water and energy-intensive sectors globally, invariably leading to significant environmental pollution e.g. issues related to air pollution and waste disposal. Also, as global competition intensifies, prices of forest products are expected to keep decreasing. To ensure their viability, traditional producers must augment their revenue streams by diversifying into the production of bioenergy and biomaterials, alongside traditional wood, pulp, and paper products. A feasible solution is the integrated products biorefineries which provide a distinctive chance to pulp and paper industry to enhance revenues as well as reduce their environmental impact. Since pulp and paper stands as the predominant industry in Sweden, this review article explores the emerging biorefinery process options and main technological pathways being developed within Swedish pulp and paper mills. It also delves into the significant challenges that are being encountered in this evolving landscape and what possibilities lie ahead for responsible and sustainable pulp and paper operations.

This study presents an innovative lateral flow microfluidic paper-based analytical device (μPAD) designed for conducting quantitative paper-based enzyme-linked immunosorbent assays (p-ELISA), seamlessly executing conventional ELISA steps in a paper-based format. The p-ELISA device utilizes a passive fluidic circuit with functional elements such as a multi-bi-material cantilever (B-MaC) assembly, delay channels, and a buffer zone, all enclosed within housing for autonomous, sequential loading of critical reagents onto the detection zone. This novel approach not only demonstrates a rapid assay completion time of under 30 min, but also boasts reduced reagent requirements, minimal equipment needs, and broad applicability across clinical diagnostics and environmental surveillance. Through detailed descriptions of the design, materials, and fabrication methods for the multi-directional flow assay (MDFA), this manuscript highlights the device’s potential for complex biochemical analyses in a user-friendly and versatile format. Analytical performance evaluation, including a limit of detection (LOD) of 8.4 pM for Rabbit IgG, benchmarks the device’s efficacy compared to existing p-ELISA methodologies. This pioneering work lays the groundwork for future advancements in autonomous diagnostics, aiming to enhance global health outcomes through accessible and reliable testing solutions.

Paper and board are widely used as food contact materials. For such sensitive applications, consumer safety regarding the transfer of chemical components and contaminants to the food needs to be established. Such safety assessments are becoming increasingly challenging not only due to intentionally added substances but also non-intentionally added substances. In the European Union, compliance testing and safety evaluation of paper in food contact are largely based on national legislation and standards. The underlying tests are conventional methods, often overestimating and sometimes underestimating the migration into food. In this article, the relevant standard test methods are contrasted with currently available scientific knowledge. The scientific approaches to develop and identify suitable test methods are critically reviewed. Furthermore, theoretical predictions via mathematical modeling, with the aim to realistically simulate transfer to food, are presented and discussed in comparison with available migration studies with foods. Objectives are to (i) summarize the actual scientific knowledge in the field and draw conclusions regarding the potential and limitations of the existing test methods and (ii) identify research gaps toward a better qualitative and quantitative understanding of transport processes of volatile and non-volatile substances from paper and board into foods.

The fraudulent practice of adding ammonium salts to milk in order to enhance the nitrogen content has serious health implications including renal failure. Ammonium ion detection has been targeted through the conventional analytical methods however, lack of portability and complex operation limits their use for field applications. In this scenario, paper-based test strips and electrochemical sensors can provide strategies for point-of-test applications. Here, an ion-selective paper-based chromogenic strip and an electrochemical sensor has been developed for detection and quantification of ammonium ions. The developed paper-based chromogenic strip showed detection limit of 0.008 % (w/v) for ammonium ions, whereas, electrochemical sensor showed an LOD of 0.0062 ± 0.0023 % (w/v) with a sensitivity of 1.6 × 10−5 A.% −1.mm−2. The developed paper-based chromogenic strip and electrochemical sensor can be employed by regulatory bodies and dairy industries to ensure the safety and quality of milk.

APPLICATION OF MASS SPECTROMETRY WITH PAPER SPRAY IONIZATION AND THE OPLS-DA CHEMOMETRIC METHOD FOR THE DIAGNOSIS OF PROSTATE CANCER BY ANALYSIS OF URINE SAMPLES. In this study, paper spray ionization mass spectrometry (PSI-MS) allied to orthogonal projections on the latent structure-discrimination analysis (OPLS-DA) was employed to differentiate urine samples from patients with prostate cancer and control individuals (without prostate cancer). The parameters of sensitivity, specificity, efficiency and Matthew’s correlation coefficient determined to analyze the efficiency and quality of the OPLS-DA model obtained a value equal to 1, which means, respectively, that the model has a good performance to correctly classify true positive samples and true negatives. These results showed 100% correct classification of the samples from the training and test set, demonstrating a high efficiency of the OPLS-DA model when classifying all samples considered as belonging to the class of interest (urine from control patient) into class 1 and all samples considered as belonging to the non-interest class (urine from patients with prostate cancer) in class 0. This efficiency resulting from the application of this model suggests that the PSI-MS combined to OPLS-DA is a promisor approach for a rapid diagnosis of prostate cancer, via chemical fingerprints of urine samples.

The use of synthetic chemicals in acid‒base testing has raised concerns about their environmental impact. The use of natural materials to produce natural indicator paper is an attempt to reduce the negative impact on the environment. Binahong (Anredera cordifolia) seeds can replace conventional chemical synthetic materials. This study aims to develop Binahong seed indicator paper as an alternative environmentally friendly material for acid‒base testing. The method used in this research is experimental and involves the extraction of Binahong seeds, making indicator paper with a certain formulation, and testing the performance of the indicator paper using standard acid and base solutions. Data collection was performed via the observation and measurement of certain parameters. The test results of the Binahong natural indicator paper revealed a significant color change when 95% ethanol was used, which produces a red or purple color at pH 1‒7, a blue color at pH 8‒10 and a yellow color at pH 11‒14. Binahong seeds have potential as an environmentally friendly alternative in acid‒base testing because they respond well to variations in the acidity and basicity of the solution.

This study investigates the impact of zirconium-based KZC series crosslinkers with varying zirconium contents and the polyamine-based crosslinker (PBC) on the properties of coated paper, focusing on key performance metrics such as viscosity, wet rub and pick resistance, dry pick resistance, gloss, brightness, ink set-off, and print mottle. The findings reveal that crosslinkers’ type and concentration significantly influence the coating colors’ viscosity, with PBC demonstrating lower low shear viscosity at lower concentrations. The KZC series showed stable viscosity across a zirconium content range of 7% to 20%, and both crosslinker types enhanced wet rub resistance at higher concentrations. Notably, the KZC series, particularly KZC7, exhibited superior wet pick resistance at increased concentrations, highlighting its effectiveness in enhancing the durability of the coating layer. All crosslinkers maintained excellent dry pick resistance, ensuring robust coating performance. While gloss and brightness were generally unaffected, KZC20, which had the highest zirconium content, slightly reduced these optical properties. Ink set-off tests indicated that the KZC series performed better at lower concentrations, whereas higher concentrations led to increased ink set-off, potentially due to over-crosslinking. Print mottle remained consistent across all crosslinkers, indicating uniform coating quality. Overall, the zirconium-based KZC series significantly enhances wet resistance and maintains high performance across various properties, though it may slightly reduce gloss and brightness and increase ink set-off at higher concentrations. PBC offers a balanced performance profile, emphasizing the need for careful crosslinker type and concentration optimization to achieve the desired coating properties for specific applications. This comprehensive evaluation provides valuable insights for developing and optimizing high-performance coated papers.

Compared to traditional lithium metal batteries, anode-free lithium metal batteries use bare current collectors as an anode instead of Li metal, making them highly promising for mass production and achieving high-energy density. The current collector, as the sole component of the anode, is crucial in lithium deposition-stripping behavior and greatly impacts the rate of Li depletion from the cathode. In this study, to investigate the lithiophilicity effect of the current collector on the solid electrolyte interface (SEI) film construction and cycling performance of anode-free lithium batteries, various lightweight paper-based current collectors were prepared by electroless plating Cu and lipophilic Ag on low-dust paper (LDP). The areal densities of the as-prepared LDP@Cu, LDP@Cu-Ag, and LDP@Ag were approximately 0.33 mg cm−2. The use of lipophilic Ag-coated collectors with varying loadings allowed for the regulation of lipophilicity. The impacts of these collectors on the distribution of SEI components and Li depletion rate in common electrolytes were investigated. The findings suggest that higher loadings of lipophilic materials, such as Ag, on the current collector increase its lipophilicity but also lead to significant Li depletion during the cycling process in full-cell anode-free Li metal batteries. Thus, moderately lithiophilic current collectors, such as LDP@Cu-Ag, show more potential for Li deposition and striping and stable SEI with a low speed of Li depletion.

Abstract Despite progress in the prevention and diagnosis of cancer, current technologies for tumor detection present several limitations including invasiveness, toxicity, inaccuracy, lengthy testing duration and high cost. Therefore, innovative diagnostic techniques that integrate knowledge from biology, oncology, medicinal and analytical chemistry are now quickly emerging in the attempt to address these issues. Following this approach, here we developed a paper-based electrochemical device for detecting cancer-derived Small Extracellular Vesicles (S-EVs) in fluids. S-EVs were obtained from cancer cell lines known to express, at a different level, the αvβ6 integrin receptor, a well-established hallmark of numerous epithelial cancer types. The resulting biosensor turned out to recognize αvβ6-containing S-EVs down to a limit of 0.7*103 S-EVs/mL with a linear range up to 105 S-EVs /mL, and a relative standard deviation of 11%, thus it may represent a novel opportunity for αvβ6 expressing cancers detection.

Carbon fiber paper is one of the most important substrates used in the gas diffusion layer of the polymer electrolyte membrane fuel cell. A novel approach to creating carbon fiber paper using polyacrylonitrile compounds was proposed in this study. The technique incorporated varying amounts of carbon materials, including carbon black (Vulcan), graphite powder, and carbon nanotubes. Polyacrylonitrile carbon materials were prepared through the spinning process, followed by oxidative stabilization under an oxygen atmosphere at a temperature range of 160–300 °C as the first step. The pliable material undergoes a conversion process to create a compound or ladder that is non-plastic, which is then stabilized in an N2 atmosphere. The fibers are then pre-carbonized at temperatures ranging from 300 to 600 °C and further carbonized between 600 and 1100 °C. After that, Teflon is added and the resulting fibers are made into sheets during the production process. Finally, physical measurements and electrochemical methods such as: checking the amount of water absorption, scanning electron microscope (SEM), chronopotentiometry, electrochemical impedance spectroscopy, electron resistance of carbon sheet, double layer capacitance, and surface roughness parameter were evaluated. The results indicate that the best performance is related to CP7 carbon paper (with a 30–70 % combination of polyacrylonitrile and carbon black).

We present a facile one-step hydrothermal method for the fabrication of free-standing graphene paper using aqueous graphene oxide (GO) dispersion as the starting material. Notably, the method does not require the use of any additives for the reduction and preparation of the graphene paper. The resulting graphene paper exhibits a high degree of reduction, as confirmed by X-ray photoelectron spectroscopy (XPS) analysis, revealing a carbon-to-oxygen (C/O) ratio of ∼7. The fabricated graphene paper also demonstrates excellent conductivity, with a measured value of ∼1900 S/m, and sheet resistance of around 100 Ω/sq. Furthermore, the energy storage capability of the graphene paper based electrode is evaluated, which shows a promising specific capacity of 249 F/g at a current density of 1 A/g in 1M H2SO4 as the ionic medium. Additionally, the electrode has also demonstrated remarkable energy density and power density values of 28.68 Wh/Kg and 455 W/Kg, respectively. Overall, the resulting graphene paper exhibits high conductivity and excellent electrochemical performance, making it a promising candidate for various energy storage applications.

Abstract Adverse Outcome Pathways (AOPs) have been proposed to facilitate mechanistic understanding of interactions of chemicals/materials with biological systems. Each AOP starts with a molecular initiating event (MIE) and possibly ends with adverse outcome(s) (AOs) via a series of key events (KEs). So far, the interaction of engineered nanomaterials (ENMs) with biomolecules, biomembranes, cells, and biological structures, in general, is not yet fully elucidated. There is also a huge lack of information on which AOPs are ENMs-relevant or -specific, despite numerous published data on toxicological endpoints they trigger, such as oxidative stress and inflammation. We propose to integrate related data and knowledge recently collected. Our approach combines the annotation of nanomaterials and their MIEs with ontology annotation to demonstrate how we can then query AOPs and biological pathway information for these materials. We conclude that a FAIR (Findable, Accessible, Interoperable, Reusable) representation of the ENM-MIE knowledge simplifies integration with other knowledge. Scientific contribution This study introduces a new database linking nanomaterial stressors to the first known MIE or KE. Second, it presents a reproducible workflow to analyze and summarize this knowledge. Third, this work extends the use of semantic web technologies to the field of nanoinformatics and nanosafety.

The sustainable use of natural resources is becoming an increasingly important issue today. Stone paper, produced as an alternative to cellulose-based paper from the forest, is rich in minerals and produced without cellulose and water. This study focuses on the behavior of screen-printing ink on two different papers, stone paper and coated sticker paper. Properties such as ink adhesion, rubbing resistance, optical printing ink density, ink consumption, and lightfastness were measured on these surfaces. Solvent- and UV-based inks were used, and printing was carried out on cellulose-based (coated sticker paper) and mineral-based (stone paper) paper layers using three different mesh counts (90, 120, and 140 tpc). The rubbing resistance and lightfastness of the papers were also measured. The present findings revealed that stone paper had the same printability properties as cellulose-based paper. The study concluded that using a 140 tpc mesh with both types of ink results in a high-lightfastness ink layer and lower ink consumption. UV-based inks exhibited high rub resistance across all mesh counts. Additionally, when printing with stone paper, there will be a reduction in ink consumption, thereby achieving cost savings. Based on the present findings, it was concluded that water- and oil-resistant stone paper can be considered an essential alternative in many fields, including the printing industry.

The Japanese Society of Tribologists is pleased to announce that the 2023 Best Paper Award of the Society was awarded to the following papers from Tribology Online. The Award was presented to the authors by Professor Noritsugu Umehara, the President of the Japanese Society of Tribologists, at the award ceremony in the JAST Annual Meeting in Tokyo on 28th May, 2024. The titles and the authors of the awarded papers: ◊ “Experiment Study on the Influence of Lubricant Viscosity and Solid Additives on Irregular Cavitation Noise in the Oscillatory Squeeze Film,” by Xu Liu, Xiaoyang Chen, Rongyu Kang, Dehua Tao, Ben Ni, Tribology Online, Vol. 15, No. 5 (2020) 365-373. ◊“Proposition of Thermal-Diffusion-Induced Spiral Model for the Rapid Oil-Film Breakdown Process during Scuffing,” by Mamoru Tohyama, Takashi Izumi, Shuzo Sanda, Tribology Online, Vol. 16, No. 2 (2021) 89-98. ◊ “Synergistic Enhancement of the Lubrication Performance of Zinc Dialkyldithiophosphate by Coexistence with Ionic Liquid,” by Kaisei Sato, Hikaru Okubo, Shouhei Kawada, Seiya Watanabe, Shinya Sasaki, Tribology Online, Vol. 16, No. 3 (2021) 178-191. ◊ “Friction Reduction by Laser Irradiation for a Friction System Using Bearing Steel and Aluminum Alloy in Engine Oil,” by Kento Ihara, Koshi Adachi, Tribology Online, Vol. 17, No. 4 (2022) 335-347. Congratulations! The Best Paper Award is given annually to the author(s), either the JAST members or non-members, of the paper(s) judged as the best paper(s) published in Journal of Japanese Society of Tribologists (Toraiborojisuto) and Tribology Online (TROL) for the previous three years. All papers that appeared in Toraiborojisuto and TROL for the three years are reviewed by the JAST Awards Committee.

Objectives: This study aims to determine the temporal stability of Schistosoma mansoni circulating cathodic antigens (CCA) in filter paper-based dried urine spot (FP-DUS) samples under varying temperatures condition. Methods: Urine from 20 children confirmed to have S. mansoni infection using Kato-Katz (at least 1 egg per gram of stool) and Schisto POC-CCA (2+ and 3+) methods were stored in form of FP-DUS and urine at room temperature (RT), 4 °C and −20 °C. Standard urine and FP-DUS Schisto POC-CCA methods were employed to detect CCA in urine and FP-DUS samples respectively, at weeks 4, 8 and 12. The results were reported as negative or positive (trace, 1+. 2+, and 3+). Results: In FP-DUS samples, POC-CCA scores initially increase after 4–8 weeks, but then showed a decrease in intensity while still remaining positive, independent of temperature condition. From week 4 to week 12, at least 80 % of urine samples had POC-CCA score of 3+, independent of temperature condition. However, 2 urine samples at RT tested negative at weeks 8 and 12. Conclusions: Despite the decrease in the intensity of test line in many samples, S. mansoni CCA remains stable and detectable in urine samples stored in FP-DUS.

In the modern day, explosive detection is essential to public safety, and fluorescent small molecules have gained popularity for their quick and accurate detection. Herein, we present the design and synthesis of a series of pyrrolo[1,2-a]quinoxaline-based conjugated small organic fluorophores (PQ-Ph-OH, PQ-Ph-NMe, PQ-Ph-OMe, PQ-Ph-Me, and PQ-Ph-CN) as fluorescence-based sensors for explosive molecules. The sensor molecules were synthesized in good to excellent yields using a dehomologative functionalization strategy. They exhibited excellent photophysical characteristics, which was tunable based on the substituent on the phenyl linker at position 3. DFT studies showed that the pyrroloquinoxaline moiety could act as an on-demand electron donor or acceptor, depending on the phenyl substituent. The molecules also exhibited solid state emission due to twisted geometry around the CC single bond between the heterocyclic scaffold and the phenyl derivative. This resulted in low band intense emission for the synthesized molecules. In the presence of electron-deficient nitroaromatic explosives, all the fluorophores showed excellent fluorescence quenching. Detection limits in the range of 10−4 M were obtained for all the fluorophores. Stern-Volmer plots show high values of binding constants, indicating good interaction between the fluorophores and the explosive molecules. The mechanism of sensing was confirmed by UV-PL spectral overlap and fluorescence lifetime measurements, which suggest a static quenching based on the formation of a ground state complex. Owing to solid state emissions in some of the derivatives, the synthesized molecules were applied to paper strips for spot detection of explosive molecules.

This study investigates the physical, mechanical, and structural characteristics of handmade paper samples derived from cellulose extracted from grass clippings using two distinct methods as follows: (1) alkali treatment and (2) alkali treatment followed by bleaching, coupled with the incorporation of barium sulfate as a mineral filler. Our investigation revealed that the handmade paper samples’ densities, moisture contents, and thicknesses varied within the ranges of 0.436 to 0.549 g/cm3, 5.60 to 2.51%, and 0.41 to 0.50 mm, respectively. The tensile strength and folding endurance of the papers produced through alkali treatment with barium sulfate were notably superior to those produced from bleached pulp and barium sulfate. Our analysis indicates that several critical factors, including paper density, thickness, the crystallinity index, and the microfibrillar structure of cellulose, intricately influence the mechanical and strength properties of the samples. Using Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) techniques, we identified characteristic cellulose bonds and examined cellulose’s crystalline and amorphous phases. Additionally, the crystallinity index of the samples was determined using both the Segal and peak deconvolution methods. Scanning electron microscopy (SEM) micrographs revealed interconnected networks of cellulose fibers with varying thicknesses and lengths, along with incorporated mineral filler within the cellulose fiber structure. Variations in mineral particle retention were attributed to the presence or absence of cellulose microfibrils. These findings contribute to our understanding of the observed strength characteristics of the paper samples and underscore the potential applications of cellulose derived from grass clippings, especially when combined with barium sulfate as a mineral filler in paper production.

This paper addresses the challenges of data sparsity and personalization limitations inherent in current recommendation systems when processing extensive academic paper datasets. To overcome these issues, the present work introduces an innovative recommendation model that integrates the wealth of structured information from knowledge graphs and refines the amalgamation of temporal and relational data. By applying attention mechanisms and neural network technologies, the model thoroughly explores the text characteristics of papers and the evolving patterns of user behaviors. Additionally, the model elevates the accuracy and personalization of recommendations by meticulously examining citation patterns among papers and the networks of author collaboration. The experimental findings show that the present model surpasses baseline models on all evaluation metrics, thereby enhancing the precision and personalization of academic paper recommendations.

The research results and evaluation of the applicability of the original composition of hybrid paper based on silver nanowires (AgNWs), cellulose pulp (CP), and carbon nanotubes (CNTs) are presented and discussed. The material tested was used to manufacture sensors for mechanical deformation resulting from external influences or related to human activity interactions. The sensors were fabricated using an AgNWs + CP suspension and additives by the vacuum filtration method. The substrate obtained was machined and then laminated with a layer of poly(dimethylsiloxane) (PDMS). The recorded responses to selected types of imposed mechanical interactions in the form of changes in the relative resistance of the sensor throughout the tests showed a close cause-and-effect relationship. The response of the tested systems when applying an alternating magnetic field was also observed. The results indicate that the proposed solutions can find application in the monitoring of mechanical interactions resulting from the dynamic behavior of physical objects, as well as derived from selected human vital functions.

The advance in the development of augmented reality technologies has attracted interest in their applicability in rescue scenarios. The characteristics of the different missions covered by First Responders, as well as the different objectives they can cover in a rescue operation, condition the importance of the additional information they can receive in these rescue processes through technology. This white paper aims to analyze the difficulties encountered when converging on the design of an interface that is adaptable to the professional and contextual circumstances in a rescue task.

Environmental pollution is a significant problem and is increasing gradually as more and more harmful pollutants are being released into water bodies and the environment. Water pollutants are dangerous and pose a threat to all living organisms and the ecosystem. Paper waste is one of the most widespread and largest wastes in the world. This research aims to address two important problems simultaneously: the reduction in solid waste in the environment using activated carbon from paper waste as potential adsorbents and the removal of harmful contaminants from water. Carbon from paper waste was activated with H2O2, HNO3, and KMnO4 for the adsorption of Cr(VI) and MB. SEM, EDX, FTIR, Raman, and BET were used to determine the properties of the materials. The surface morphology of the materials consisted of amorphous particles. EDX shows that all activated samples have a higher content of (O) than carbon paper waste. Adsorption studies showed that there was a stronger interaction between the pollutants and the adsorbent at a higher initial concentration (200 mg/L) than at the lower initial concentrations. The contact time data show that uptake increases when the interaction time between the contaminant and the adsorbent is increased. The tests for the pH of the solution show that the adsorption of Cr(VI) decreases when the pH is gradually increased, whereas the adsorption of MB increases when the pH of the solution is increased. The results fit better with the Freundlich isotherm and PSO models. The temperature studies show that the enthalpy was positive, indicating that the uptake process is endothermic. The Gibbs free energy values were all negative, indicating that adsorption between the adsorbents and the pollutants was favored. After four consecutive cycles, all the samples retained more than 60% of their uptake capability.

Lithium–sulfur (Li–S) batteries are expected to be one of the next generations of high-energy-density battery systems due to their high theoretical energy density of 2600 Wh kg−1. Embracing the trends toward flexibility, lightweight design, and cost-effectiveness, paper-based electrodes offer a promising alternative to traditional coated cathodes in Li–S batteries. Within paper-based electrodes, conductive fibers such as carbon nanotubes (CNTs) play a crucial role. They help to form a three-dimensional network within the paper matrix to ensure structural integrity over extended cycling while mitigating the shuttle effect by confining sulfur within the cathode. Herein, we explore how variously functionalized CNTs, serving as conductive fibers, impact the physical and electrochemical characteristics of paper-based sulfur cathodes in Li–S batteries. Specifically, graphitized hydroxylated carbon nanotubes (G-CNTs) exhibit remarkable capacity at low currents owing to their excellent conductivity and interaction with lithium polysulfide (LiPS), achieving the highest initial specific capacity of 1033 mAh g−1 at 0.25 C (1.1 mA cm−2). Aminated multi-walled carbon nanotubes (NH2-CNTs) demonstrate an enhanced affinity for LiPS due to the -NH2 groups. However, the uneven distribution of these fibers may induce electrode surface passivation during charge–discharge cycles. Notably, hydroxylated multi-walled carbon nanotubes (OH-CNTs) can establish a uniform and stable 3D network with plant fibers, showcasing superior mechanical properties and helping to mitigate Li2S agglomeration while preserving the electrode porosity. The paper-based electrode integrated with OH-CNTs even retains a specific capacity of approximately 800 mAh g−1 at about 1.25 C (5 mA cm−2), demonstrating good sulfur utilization and rate capacity compared to other CNT variants.

Buckypaper (BP), a flexible and porous material, exhibits photovoltaic properties when exposed to light. In this study, we employed radio frequency (RF) sputtering of zinc oxide (ZnO) followed by rapid thermal annealing to enhance the photovoltaic response of BP. We investigated the impact of various sputtering parameters, such as the gas flow ratio of argon to oxygen and deposition time, on the morphology, composition, resistivity, and photovoltaic characteristics of ZnO-modified BP. Additionally, the photovoltaic performance of the samples under different illumination modes and wavelengths was compared. It was found that optimal sputtering conditions—argon to oxygen flow ratio of 1:2, deposition time of 20 min, and power of 100 watts—resulted in a ZnO film thickness of approximately 45 nanometers. After annealing at 400 °C for 10 min, the ZnO-modified BP demonstrated a significant increase in photocurrent and photovoltage, along with a reduction in resistivity, compared to unmodified BP. Moreover, under gradient illumination, the ZnO-modified BP exhibited a photovoltage enhancement of 14.70-fold and a photocurrent increase of 13.86-fold, compared to uniform illumination. Under blue light, it showed a higher photovoltaic response than under other colors. The enhancement in photovoltaic response is attributed to the formation of a Schottky junction between ZnO and BP, an increased carrier concentration gradient, and an expanded light absorption spectrum. Our results validate that ZnO sputtering followed by annealing is an effective method for modifying BP for photovoltaic applications such as solar cells and photodetectors.

The Special Issue “Exclusive Papers of the Editorial Board Members and Topical Advisory Panel Members of Catalysts in Section “Catalytic Materials” contains 14 peer-reviewed research articles and 1 review paper (Contributions 1–15), which broadly focus on the field of homogeneous and heterogeneous catalysis, with an emphasis on synthesis, physico-chemical characterizations, and applications in several environmental protection reactions, such as CO2 valorization, NOx SCR, removal of VOCs, photocatalysis [...]

Inflammable building finishing materials act as a major cause of fire propagation, and they, therefore, pose significant risks to life and can lead to property damage. To replace such flammable building finishing materials, many countries have established regulations limiting their use, which has led to extensive research on the development of flame-retardant building finishing materials. Such methods have included adding flame retardants to construction materials to reduce the heat release rate and total heat release. The present study aimed to enhance the fire performance of cellulose-based architectural finishing materials by creating a dual flame-retardant mixture using expandable graphite and magnesium hydroxide added to recycled paper waste. Specimen fabrication involves using a pressing method to apply uniform pressure to compress the mixture in a mold. The total heat release (THR), CO, and CO2 production of the produced specimens were measured using a cone calorimeter while varying the magnesium hydroxide additive ratio. The combustion gases were measured through NES 713 experiments to determine any changes in the Toxic Index corresponding to variations in the magnesium hydroxide content. The experiment results established a correlation between the magnesium hydroxide additive ratio and the total heat release, as well as the existence of variations in CO and CO2 production for the dual flame-retardant recycled paper material. A database for combustion gases was also obtained. It was confirmed that the fire performance was improved by confirming that the total heat release decreased by 52% from the previous one in the magnesium hydroxide content of 30 g, and it was confirmed that the inflection points of the Toxic Index value due to the change in CO and CO2 gas production occurred in the magnesium hydroxide content of 20 g due to the improvement of the fire performance. Through the ISO 5660-1 experiment data, we have secured data that can be used as foundational information for performance-oriented fire risk assessments, thereby ensuring the fire safety of cellulose materials that are vulnerable to fire.

The valorization of wastes as an alternative or secondary raw material in various products and processes has been a solution for the implementation of sustainability, a safer environment, and the concept of circular economy in the efficient use and management of natural resources. To promote sustainability through a circular economy approach, this work tries to demonstrate the environmental gains that are obtained by bringing together, in an industrial symbiosis action, two large industrial sectors (the pulp and paper and the road pavement sectors) responsible for generating large amounts of wastes. A sustainability assessment, based on a life cycle and circular economy approach, is presented here, and discussed using a simple case study carried out on a real scale. Two wastes (dregs and grits) from the pulp and paper industry (PPI) were used to partially replace natural fine aggregates in the production of bituminous mixtures used on the top surface of road pavements. The impacts at a technical, environmental, economic, and social level were assessed and it was shown that this simple waste valorization action is not only positive for the final product from a technical point of view, but also for the environment, causing positive impacts on the different sustainability dimensions that were evaluated.

Developing highly efficient and stable electrocatalysts for urea electro-oxidation reactions (UORs) will improve wastewater treatment and energy conversion. A low-cost cobalt sulfide-anchored nickel sulfide electrode (CoS/Ni3S2@CP) was synthesized by electrodeposition in DMSO solutions and found to be highly effective and long-lasting. The morphology and composition of catalyst surfaces were examined using comprehensive physicochemical and electrochemical characterization. Specifically, CoS/Ni3S2@CP electrodes require a potential of 1.52 volts for a 50 mA/cm2 current, confirming CoS in the heterointerface CoS/Ni3S2@CP catalyst. Further, the optimized CoS/Ni3S2@CP catalyst shows a decrease of 100 mV in the onset potential (1.32 VRHE) for UORs compared to bare Ni3S2@CP catalysts (1.42 VRHE), demonstrating much greater performance of UORs. As compared to Ni3S2@CP, CoS/Ni3S2@CP exhibits twofold greater UOR efficiency as a result of a larger electroactive surface area. The results obtained indicate that the synthetic CoS/Ni3S2@CP catalyst may be a favorable electrode material for managing urea-rich wastewater and generating H2.

This Special Issue of Catalysts is dedicated to recent advances in the research areas of photocatalysts and photocatalyzed reactions [...]

Catalytic materials exist in several forms and can be prepared using different methodologies and protocols [...]

Herein, I would like to provide an overview of this Special Issue, published in the Organic and Polymer Chemistry Section of Catalysis, comprising contributions from 18 of the journal’s Editorial Board Members [...]

The study and advancement of crank-slide actuating mechanisms based on four-link structural groups are promising for the development of new designs of crank presses and other stamping and forging machines [...]

Flexible paper-based force sensors have garnered significant attention for their important potential applications in healthcare wearables, portable electronics, etc. However, most studies have only used paper as the flexible substrate for sensors, not fully exploiting the potential of paper’s micro-nanostructure for sensing. This article proposes a novel approach where paper serves both as the sensitive element and the flexible substrate of force sensors. Under external mechanical forces, the micro-nanostructure of the conductive-treated paper will change, leading to significant changes in the related electrical output and thus enabling sensing. To demonstrate the feasibility and universality of this new method, the article takes paper-based capacitive pressure sensors and paper-based resistive strain sensors as examples, detailing their fabrication processes, constructing sensing principle models based on the micro-nanostructure of paper materials, and testing their main sensing performance. For the capacitive paper-based pressure sensor, it achieves a high sensitivity of 1.623 kPa−1, a fast response time of 240 ms, and a minimum pressure resolution of 4.1 Pa. As for the resistive paper-based strain sensor, it achieves a high sensitivity of 72 and a fast response time of 300 ms. The proposed new method offers advantages such as high sensitivity, simplicity in the fabrication process, environmental friendliness, and cost-effectiveness, providing new insights into the research of flexible force sensors.

In the criminal sphere, it is extremely important to identify perpetrators of crimes based on latent fingerprints (invisible to the naked eye) revealed at crime scenes and their corresponding objects. The present work aimed to evaluate four synthetic analogues of curcumin as possible IDL developers, and to compare their results with those of carbon black developer, as well as to reach the most adequate parameters in the use of the LTQ and FT-ICR mass spectrometers with the paper spray ionization (PS) source to study the chemical composition of the endogenous substances contained in the IDL. For this, a 24-1 factorial design was developed, where it was verified that the distance and voltage factors were the most influential for the increase in the response of signals, in the analysis of latent fingerprints by PS. Among the detected substances we can mention around 20 fatty acids, and squalene. Finally, four potential developers, synthetic analogues of curcumin, were compared with carbon black developer. The revelation of latent fingerprints occurred efficiently, allowing the visualization of minutiae, such as bifurcation and end of line, making it possible to classify them, according to the Vucetich Fingerprint Classification System.

This paper presents the results of research on the impact of graphene paper on selected bacterial strains. Graphene oxide, from which graphene paper is made, has mainly bacteriostatic properties. Therefore, the main goal of this research was to determine the possibility of using graphene paper as a carrier of a medicinal substance. Studies of the degree of bacterial inhibition were performed on Staphylococcus aureus and Pseudomonas aeruginosa strains. Graphene paper was analyzed not only in the state of delivery but also after the incorporation of the antibiotics ciprofloxacin, cefazolin, and methicillin into its structures. In addition, Fourier-Transform Infrared Spectroscopy, contact angle, and microscopic analysis of bacteria on the surface of the examined graphene paper samples were also performed. Studies have shown that graphene paper with built-in ciprofloxacin had a bactericidal effect on the strains of Staphylococcus aureus and Pseudomonas aeruginosa. In contrast, methicillin, as well as cefazolin, deposited on graphene paper acted mainly locally. Studies have shown that graphene paper can be used as a carrier of selected medicinal substances.

Invasive alien plant species (IAPS) may cause threats to native biodiversity in ecosystems. Researchers have been investigating all the possible ways that they can be used effectively for other purposes. Since IAPS are capable of forming cellulose fibre nets, in this research, papers were made from three different types of IAPS (Japanese knotweed, giant goldenrod, and black locust). This research examined these IAPS papers and their effectiveness when used as printing substrates. In comparison to commercial office paper, the differences in basic, surface, optical, and microscopic properties were measured. As a widely used technology, inkjet printing was applied. We tested a commonly used sans-serif typeface (which has been established as being more legible than other typefaces in previous research) in three different type sizes (i.e., 8, 10, and 12 pt). According to the results, paper made from IAPS could offer some usable properties and acceptable legibility, especially when printing typefaces with specific attributes, such as moderate counter size, higher x-height, and minimal differences in the letter stroke width, are used. An appropriate typographic tonal density should be achieved in combination with an adequate letter size, e.g., 10 pt type size when a sans-serif typeface is used.