Search

This work reports on the development of an analyte sampling strategy on a plasmonic substrate to amplify the detection capability of a dual analytical system, paper spray ionization–mass spectrometry (PSI-MS) and surface-enhanced Raman spectroscopy (SERS). While simply applying only an analyte solution to the plasmonic paper results in a limited degree of SERS enhancement, the introduction of plasmonic gold nanoparticles (AuNPs) greatly improves the SERS signals without sacrificing PSI-MS sensitivity. It is initially revealed that the concentration of AuNPs and the type of analytes highly influence the SERS signals and their variations due to the “coffee ring effect” flow mechanism induced during sampling and the degree of the interfacial interactions (e.g., van der Waals, electrostatic, covalent) between the plasmonic substrate and analyte. Subsequent PSI treatment at high voltage conditions further impacts the overall SERS responses, where the signal sensitivity and homogeneity significantly increase throughout the entire substrate, suggesting the ready migration of adsorbed analytes regardless of their interfacial attractive forces. The PSI-induced notable SERS enhancements are presumably associated with creating unique conditions for local aggregation of the AuNPs to induce effective plasmonic couplings and hot spots (i.e., electromagnetic effect) and for repositioning analytes in close proximity to a plasmonic surface to increase polarizability (i.e., chemical effect). The optimized sampling and PSI conditions are also applicable to multi-analyte analysis by SERS and MS, with greatly enhanced detection capability and signal uniformity.

In this study, we designed three promising platforms based on metal–organic frameworks (MOFs) to develop paper-based analytical devices (PADs) for biosensing applications. PADs have become increasingly popular in field sensing in recent years due to their portability, low cost, simplicity, efficiency, fast detection capability, excellent sensitivity, and selectivity. In addition, MOFs are excellent choices for developing highly sensitive and selective sensors due their versatility for functionalizing, structural stability, and capability to adsorb and desorb specific molecules by reversible interactions. These materials also offer the possibility to modify their structure and properties, making them highly versatile and adaptable to different environments and sensing needs. In this research, we synthesized and characterized three different amino-functionalized MOFs: UiO-66-NH2 (Zr), MIL-125-NH2 (Ti), and MIL-101-NH2 (Fe). These MOFs were used to fabricate PADs capable of sensitive and portable monitoring of alkaline phosphatase (ALP) enzyme activity by laser-induced fluorescence (LIF). Overall, amino-derivated MOF platforms demonstrate significant potential for integration into biosensor PADs, offering key properties that enhance their performance and applicability in analytical chemistry and diagnostics.

As a significant biomarker during the apoptosis process, cytochrome c (Cyt c) is considered as a critical component in the inherent apoptotic pathway, but the simple and portable detection still remains challengeable. In this work, a portable and visual sensing platform for Cyt c was developed based upon the fluorescence quenching of graphene quantum dots (GQDs), which could be finished within a few seconds. Herein, the absorption spectrum of Cyt c matched the emission spectrum of GQDs well, which could cause the fluorescence quenching of GQDs via the inner filter effect (IFE) in the range of 1–50 μg/mL with the limit of detection as low as 0.1 μg/mL. Furthermore, the intracellular Cyt c was imaged to observe the apoptosis process of cancer cells induced by staurosporine. To achieve the portable and visual detection of Cyt c, GQDs were deposited on the filter paper to form the solid platform, which displayed a gradual fluorescence quenching when different concentrations of Cyt c were present. Compared to the conventional methods, the proposed assay is low-cost, fast, portable, and visual, which will be useful for the investigation of mitochondrial dysfunction and apoptotic cell death.

Nowadays, mycotoxin contamination in cereals and wastewater exposes a safety hazard to consumer health. This work describes the design of a simple, low-cost, and sensitive origami microfluidic paper-based device using electrochemical detection for zearalenone determination. The microfluidic immunosensor was designed on a paper platform by a wax printing process. The graphitized carbon working electrode modified with carbon nanohorns-decorated nanoporous gold showed a higher surface area, sensitivity, and adequate analytical performance. Electrodes were characterized by scanning electron microscopy, energy-dispersive spectroscopy, and cyclic voltammetry. The determination of zearalenone was carried out through a competitive immunoassay using specific antibodies immobilized by a covalent bond on the electrode surface. In the presence of HRP-labeled enzyme conjugate, substrate, and catechol, zearalenone was detected employing the developed immunosensor by applying −0.1 V to the working electrode vs silver as a pseudo-reference electrode. A calibration curve with a linear range between 10 and 1000 µg Kg−1 (R2 = 0.998) was obtained, and the limit of detection and quantification for the electrochemical immunosensor were 4.40 and 14.90 µg Kg−1, respectively. The coefficient of variation for intra- and inter-day assays was less than 5%. The selectivity and specificity of the sensor were evaluated, comparing the response against zearalenone metabolites and other mycotoxins that could affect the corn samples. Therefore, origami is a promising approach for paper-based electrochemical microfluidic sensors coupled to smartphones as a rapid and portable tool for in situ mycotoxins detection in real samples.

The authors make the following corrections to the published paper [...]

Effective pathogen detection is essential for plant disease control. However, plant sample preparation for downstream assays, such as quantitative polymerase chain reaction (qPCR), is challenging to perform outside of a laboratory. This paper reports two sample preparation methods featuring chemical and mechanical lysis and nucleic acid extraction using a micro-homogenizer, followed by serial dilution or nucleic acid purification with a paper disk before assay. Five minutes of lysis and extraction resulted in DNA and RNA yields of up to 76.5% and 63.3%, respectively, compared to mortar and pestle controls. Crude lysates were unsuitable for direct use in qPCR assays; however, serial dilution or quick wash using chromatography paper rendered samples ready for such assays. Additionally, the nucleic acids stored on paper disks under various storage conditions remained stable for one month. These methods can facilitate the in-field preparation of citrus samples and allow for both onsite and mail-in diagnostics for growers.

Neurotransmitters are essential chemical messengers required for proper brain function, and any changes in their concentrations can lead to neuronal diseases. Therefore, sensitive and selective detection is crucial. This study presents a fast and simple colorimetric method for dopamine detection using three reagent solutions: AgNP and MPA, Ag/Au nanocomposite, and mercaptophenylacetic acid. TEM images showed a narrow distribution of Ag and Au nanoparticles with average sizes of 20 nm and 13 nm, respectively, with gold nanoparticles bound to the edges of silver nanoparticles. A paper-based biosensor was created using manual wax printing for the colorimetric detection of dopamine. Visual detection onsite showed color changes with both the silver nanoparticles and mercaptophenylacetic acid mixture and the silver–gold nanoparticle composite. Electrochemical detection using a glassy carbon electrode modified with 8 mM mercaptophenylacetic acid demonstrated high selectivity and sensitivity towards dopamine, with a peak in the range of 0.7–0.9 V. Interferences were minimized, ensuring high sensitivity and selective detection of dopamine.

Bacterial cellulose is a versatile material with applications in many industries. However, the widespread uptake of bacterial cellulose faces challenges including high production costs and lack of scalability. One approach to address these obstacles is the use of alternative substrates and media, compared to the Hestrin–Schramm (HS) media. By evaluating and selecting appropriate media and substrates, the production of bacterial cellulose can be more efficient: enabling sustainable systems and supply chains where less energy and materials are lost, and the output production is increased. The purpose of this paper is to analyze the current landscape of bacterial cellulose alternative media and substrates (ingredients). Through a systematic review of 198 papers, this review identifies 299 alternative substrates from 12 industries and 101 bacterial cellulose-producing strains, which were systematically compared. This review also finds that there are methodological gaps in this field such as data variability, papers mislabelling the HS media or not using a comparison media, and a lack of strain names. This alternative substrate analysis for bacterial cellulose production demonstrates that overall, for some applications alternative substrates can be taken into consideration that are not only cheaper, but also produce higher yields than HS media.

In order to improve the electrical conductivity of nylon 6 (PA6) and avoid misfires and explosions caused by static charge accumulation, a quaternary ammonium salt polyionic liquid (PIL) antistatic agent was synthesized in this paper. The surface resistance of PA6 was reduced to 108 Ω with the addition of 2 wt% antistatic agent, and the mechanical properties and aging resistance of the substrate were improved. Meanwhile, the morphology and crystallinity of PIL/PA6 composites were further characterized by scanning electron microscope (SEM), energy dispersion spectrometer (EDS) and X-ray diffraction (XRD). It is worth noting that the quaternary ammonium salt polyionic liquid antistatic agent synthesized in this paper has the advantages of excellent antistatic effect, durability, low cost, and simple reaction condition, so it has a broad application prospect in the antistatic aspect of PA6.

Abstract Mitochondria, responsible for cellular energy synthesis and signal transduction, intricately regulate diverse metabolic processes, mediating fundamental biological phenomena such as cell growth, aging, and apoptosis. Tumor invasion and metastasis, key characteristics of malignancies, significantly impact patient prognosis. Tumor cells frequently exhibit metabolic abnormalities in mitochondria, including alterations in metabolic dynamics and changes in the expression of relevant metabolic genes and associated signal transduction pathways. Recent investigations unveil further insights into mitochondrial metabolic abnormalities, revealing their active involvement in tumor cell proliferation, resistance to chemotherapy, and a crucial role in tumor cell invasion and metastasis. This paper comprehensively outlines the latest research advancements in mitochondrial structure and metabolic function. Emphasis is placed on summarizing the role of mitochondrial metabolic abnormalities in tumor invasion and metastasis, including alterations in the mitochondrial genome (mutations), activation of mitochondrial-to-nuclear signaling, and dynamics within the mitochondria, all intricately linked to the processes of tumor invasion and metastasis. In conclusion, the paper discusses unresolved scientific questions in this field, aiming to provide a theoretical foundation and novel perspectives for developing innovative strategies targeting tumor invasion and metastasis based on mitochondrial biology. Graphical Abstract

Microplastics are contaminants in marine ecosystems, posing great threats to biota and human health. In this work, we provide an overview of the progress made in understanding microplastic prevalence in tropical coastal environments, focusing on the Johor and the Singapore Straits as a case study. We examine the sources, distribution, transport, and ecological impact of microplastic pollution in this region through a systematic review. All papers relating to marine microplastics in Singapore’s sand and benthic sediments, seawater, and marine biota were used for analysis, from 2004 to 2023. In addition, we discuss the influence of envi-ronmental factors such as coastal morphology and anthropogenic activities on patterns of microplastic accumulation. We emphasize that microplastic pollution is more prevalent along the eutrophic Johor Strait compared to the Singapore Strait due to hydrological conditions. Rainfall is also a key factor that influences mi-croplastic abundance during the monsoon seasons. Furthermore, the bacterial and plankton assemblages of organisms on microplastic surfaces are diverse, with eutrophic waters enhancing the diversity of organisms on microplastic surfaces. Novel harmful cyanobacteria and bloom species of phytoplankton were also found on microplastic surfaces. By synthesizing existing research findings and highlighting regional characteristics, this paper contributes to ongoing efforts to mitigate microplastic pollution in tropical regions.

The utility of brewery spent grain (BSG), a byproduct of the beer production process, for the synthesis of polyhydroxyalkanoates (PHAs), is a significant advancement towards sustainable and cost-effective biopolymer production. This paper reviews the upcycling potential of BSG as a substrate for PHA production, utilizing various biotechnological approaches to convert this abundant waste material into high-value biodegradable polymers. Through a comprehensive review of recent studies, we highlight the biochemical composition of BSG and its suitability for microbial fermentation processes. This research delves into different methodologies for PHA production from BSG, including the use of mixed microbial cultures (MMCs) for the synthesis of volatile fatty acids (VFAs), a critical precursor in PHA production, and solid-state fermentation (SSF) techniques. We also examine the optimization of process parameters such as pH, temperature, and microbial concentration through the application of the Doehlert design, revealing the intricate relationships between these factors and their impact on VFA profiles and PHA yields. Additionally, this paper discusses challenges and future perspectives for enhancing the efficiency and economic viability of PHA production from BSG. By harnessing the untapped potential of BSG, this research contributes to the development of a circular economy model, emphasizing waste valorization and the creation of sustainable alternatives to conventional plastics.

This paper focuses on the numerical study of spherical particle sedimentation, taking into account hydrodynamic interactions. Infinite impulse response (IIR) digital filters, specially tailored to solve the sedimentation dynamics, were used in the present study to numerically solve the coupled ordinary differential equations with the time-dependent coefficients of the problem. Hydrodynamic interactions are modeled using the Rotne–Prager–Yamakawa (RPY) approximation, to which a correction is made to better account for short-range interactions. In order to validate both the proposed numerical resolution method and the RPY correction, this paper begins with the study of two interacting spherical particle sedimentation methods. Comparisons with previously published analytical or numerical results confirm the relevance of the present approach.

Abstract Background Intervertebral disc degeneration (IVDD) is one of the etiologic factors of degenerative spinal diseases, which can lead to a variety of pathological spinal conditions such as disc herniation, spinal stenosis, and scoliosis. IVDD is a leading cause of lower back pain, the prevalence of which increases with age. Recently, Sirtuins/SIRTs and their related activators have received attention for their activity in the treatment of IVDD. In this paper, a comprehensive systematic review of the literature on the role of SIRTs and their activators on IVDD in recent years is presented. The molecular pathways involved in the regulation of IVDD by SIRTs are summarized, and the effects of SIRTs on senescence, inflammatory responses, oxidative stress, and mitochondrial dysfunction in myeloid cells are discussed with a view to suggesting possible solutions for the current treatment of IVDD. Purpose This paper focuses on the molecular mechanisms by which SIRTs and their activators act on IVDD. Methods A literature search was conducted in Pubmed and Web of Science databases over a 13-year period from 2011 to 2024 for the terms “SIRT”, “Sirtuin”, “IVDD”, “IDD”, “IVD”, “NP”, “Intervertebral disc degeneration”, “Intervertebral disc” and “Nucleus pulposus”. Results According to the results, SIRTs and a large number of activators showed positive effects against IVDD.SIRTs modulate autophagy, myeloid apoptosis, oxidative stress and extracellular matrix degradation. In addition, they attenuate inflammatory factor-induced disc damage and maintain homeostasis during disc degeneration. Several clinical studies have reported the protective effects of some SIRTs activators (e.g., resveratrol, melatonin, honokiol, and 1,4-dihydropyridine) against IVDD. Conclusion The fact that SIRTs and their activators play a hundred different roles in IVDD helps to better understand their potential to develop further treatments for IVDD. Novelty This review summarizes current information on the mechanisms of action of SIRTs in IVDD and the challenges and limitations of translating their basic research into therapy.

The global narrative around domestic energy security is dominated by the paradigm of import-dependent countries, and as a result the interactions of energy export activities with domestic energy systems are not generally considered. In this paper, we apply a systems approach to establish two potential blind spots in evaluating the whole-of-system energy security of energy resource exporters (actual primary energy self-sufficiency and export exposure of the domestic energy system), and examine some case studies, primarily in the Australian context, to validate the existence of these blind spots. The commencement of LNG exports from the state of Queensland is examined in detail. Furthermore, we propose two novel quantitative indicators to mitigate the blind spots established. First, a revised method is proposed to calculate energy self-sufficiency, showing for the exporters studied a less secure position than shown by the traditional method. Second, an indicator is proposed to quantify the extent of exposure of the domestic energy system to international markets through export linkages, which we have applied to Australia’s domestic energy system, showing the extent of the increase in international exposure since LNG exports from Queensland commenced in 2015–2016. Conclusions of this paper include the realization that domestic energy security for energy exporters, such as Australia and the other countries examined, is more complex and, in the cases examined, less secure than importer-oriented energy security frameworks have previously recognized. A further conclusion is established that the decoupling of energy resource exports from the domestic energy system through transition to a zero-carbon energy system based on domestic renewable energy sources can be an effective means of improving Australia’s energy security.

We have identified a HRP enzyme with microcrystalline cellulose activity, which has not yet been explored. The current study investigated the effect of HRP pretreatment on the microcrystalline cellulose substrates, Avicel and filter paper. SEM findings showed that HRP pretreatment catalysed the para-microcrystalline regions of Avicel, cracking and opening the pores on the surface. On filter paper, HRP removed the para-microcrystalline regions exposing fibres. Crystallinity index (CrI) analysis confirmed that HRP increased the CrI of Avicel from 49 % to 54.19 % and filter paper from 42 % to 47 %. The cellulose crystallite sizes increased from 45 to 47 nm at the 002 lattices in Avicel, suggesting a reduction of crystalline cellulose. In addition, endoglucanase displayed 1.15-fold increased activity on HRP-pretreated Avicel, confirming reduced crystalline cellulose. These findings showed that HRP pretreatment changed the structural and chemical properties of Avicel, i.e., loosening crystalline cellulose to make the substrate accessible to enzymes during hydrolysis. Finally, these findings were supported by rooibos microcrystalline cellulose modification post-HRP pretreatment, resulting in a 95 % yield of soluble sugars at 25 mg enzyme cocktail/g biomass.

Cellulose nanocrystals (CNCs) were extracted from waste corrugated cardboard (WCC), waste paper towel (WPT), and waste paper towel cardboard roll (WPTR) using modified chemical methods. Instead of being discarded in landfills, these household waste materials were recognized as cost-effective and readily available sources for producing CNCs, which can serve as efficient water adsorbents in agricultural applications. Despite the inherent impurities and contaminants in household waste, the pretreatment and acid hydrolysis processes were found to be effective in removing a significant portion of these undesirable substances, as confirmed by FTIR spectra analysis. The extracted CNCs displayed a needle/whisker-shaped morphology with diameters ranging from 4 to 15 nm. Crystallinity levels of the CNCs extracted from WCC, WPT, and WPTR were determined to be 81.11 %, 85.29 %, and 80.68 %, respectively. The CNCs were then tested for their role as promoters of seed germination in plant starter plugs under different relative humidity conditions. Results indicated that under high relative humidity (above 70 %), seeds exhibited rapid germination (within 3–4 days) when the plugs were coated with CNCs at a minimum concentration of 5 %. However, under moderate relative humidity (50 %), germination occurred within 5–6 days at CNC concentrations of 10–15 %.

Electrospinning is a simple and affordable method of producing nanofibers, offering a large specific surface area and highly porous structures with diameters ranging from nanometers to micrometers. This process relies on an electrostatic field, providing precise control over the fiber dimensions and morphologies through parameter optimization and the use of specialized spinnerets and collectors. The paper extensively covers the electrospinning process and parameters, shedding light on the factors influencing electrospinning. It addresses the morphological and structural aspects of electrospun fibers that are used in different applications. Additionally, this paper explores various polymeric and non-polymeric materials used in electrospinning. Furthermore, it investigates the incorporation of fillers during electrospinning, using an electric field to enhance properties and functionality. The review concludes by offering insights into upscaling electrospinning production.

With the increase in the growing rate of municipal solid waste throughout the world and due to the high moisture and organic components of the organic fraction of municipal solid waste, dry anaerobic digestion has become the future direction to cope with this waste while reducing the impact on the environment, including climate change. Dry anaerobic digestion has become a promising technology that converts the organic fraction of municipal solid waste into combustible biogases, which can be used as an alternative energy source. However, the technology faces several challenges that must be addressed to enhance its performance and adoption. This paper provides a comprehensive analysis of the current technologies used for dry anaerobic digestion in OFMSW and delves into the various factors that influence the performance of these technologies. This review paper also identifies and discusses the challenges faced in optimizing and scaling up these technologies, such as feedstock pretreatment requirements, characteristics of inoculum, and other crucial parameters.

Oxidative stress, caused by the formation of free radicals, such as reactive oxygen species (ROS), leads to cell and tissue degradation, contributing to various diseases and aging. While oxygen is essential for aerobic organisms, it inevitably causes oxidative stress. Antioxidants protect against damage from free radicals, and oxidative stress arises when an imbalance occurs between free radical production and antioxidant defenses. However, when investigating whether an excess of antioxidants, almost eliminating oxidative stress, could benefit aging and disease susceptibility, it was observed that a basic level of oxidative stress appears necessary to maintain the correct homeostasis of tissues and organs and life in general. Therefore, this review aimed to compile the most significant and recent papers characterizing and describing the dual role of oxygen as a molecule essential for life and as a precursor of oxidative stress, which can be detrimental to life. We conducted targeted searches in PubMed and Google browsers to gather all relevant papers. We then focused on the eye, an organ particularly vulnerable due to its high metabolic activity combined with direct exposure to light and environmental pollutants, which produces a substantial number of free radicals (mainly ROS). We present a curated selection of relevant literature describing the main ocular pathologies of the posterior and anterior segments of the eye, highlighting oxidative stress as a significant contributing factor. Additionally, we report how endogenous and exogenous antioxidants can mitigate the development and progression of these diseases. Finally, we consider a frequently overlooked aspect: the balance between oxidants and antioxidants in maintaining the homeostatic equilibrium of tissues and organs. It is widely recognized that when oxidants overwhelm antioxidants, oxidative stress occurs, leading to negative consequences for the organism's homeostasis. However, we emphasize that a similarly dangerous situation can arise when the presence of antioxidants overwhelms the production of free radicals, drastically reducing their amount and adversely affecting aging and longevity. Unfortunately, no specific studies have addressed this particular situation in the eye.

Abstract Background We previously reported aberrant expression of the cytosolic ribosomal biogenesis factor Nop-7-associated 2 (NSA2) in diabetic nephropathy, the latter also known to involve mitochondrial dysfunction, however the connections between NSA2, mitochondria and renal disease were unclear. In the current paper, we show that NSA2 expression is co-regulated with the GTP-dependent ribosome recycling factor mitochondrial 2 (GFM2) and provide a molecular link between cytosolic and mitochondrial ribosomal biogenesis with mitochondrial dysfunction in chronic kidney disease (CKD). Methods Human renal tubular cells (HK-2) were cultured (+/- zinc, or 5mM/20mM glucose). mRNA levels were quantified using real-time qPCR. Transcriptomics data were retrieved and analysed from Nakagawa chronic kidney disease (CKD) Dataset (GSE66494) and Kidney Precision Medicine Project (KPMP) ( https://atlas.kpmp.org/ ). Protein levels were determined by immunofluorescence and Western blotting. Cellular respiration was measured using Agilent Seahorse XF Analyzer. Data were analysed using one-way ANOVA, Students’ t-test and Pearson correlation. Results The NSA2 gene, on human chromosome 5q13 was next to GFM2. The two genes were syntenic on opposite strands and orientation in multiple species. Their common 381 bp 5’ region contained multiple transcription factor binding sites (TFBS) including the zinc-responsive transcription factor MTF1. NSA2 and GFM2 mRNAs showed a dose-dependent increase to zinc in-vitro and were highly expressed in proximal tubular cells in renal biopsies. CKD patients showed higher renal NSA2/GFM2 expression. In HK-2 cells, hyperglycaemia led to increased expression of both genes. The total cellular protein content remained unchanged, but GFM2 upregulation resulted in increased levels of several mitochondrial oxidative phosphorylation (OXPHOS) subunits. Furthermore, increased GFM2 expression, via transient transfection or hyperglycemia, correlated with decrease cellular respiration. Conclusion The highly conserved synteny of NSA2 and GFM2, their shared 5’ region, and co-expression in-vitro and in CKD, shows they are co-regulated. Increased GFM2 affects mitochondrial function with a disconnect between an increase in certain mitochondrial respiratory proteins but a decrease in cellular respiration. These data link the regulation of 2 highly conserved genes, NSA2 and GFM2, connected to ribosomes in two different cellular compartments, cytosol and mitochondria, to kidney disease and shows that their dysregulation may be involved in mitochondrial dysfunction.

Abstract Background Fibroblast cells have the ability to improve skin conditions through regenerative medicine and cell-based therapies. The purpose of this scoping review is to assess the contribution of fibroblast cells to skin homeostasis and extracellular matrix deposition in clinical trials involving skin disorders and cosmetic applications. Methods Using targeted search terms, published publications from January 2000 to August 2023 that addressed fibroblast uses in clinical trials of skin conditions were obtained from bibliographic databases like PubMed, Scopus, and Web of Science (WoS). Precise inclusion and exclusion criteria were used during the screening process. The potential benefits of induction treatment with fibroblasts lead to the choosing of clinical trials for this kind of treatment. Results Out of the 820 published ppapers initially identified, only 35 studies fulfilled our meticulous eligibility criteria after careful screening. To ensure clarity, we methodically eliminated any duplicate or irrelevant published papers, thereby offering a transparent account of our selection process. Conclusion This study highlights the advantages of fibroblast therapy in treating skin conditions such as diabetic foot, venous leg ulcers, and cosmetic reasons. Fibroblasts possess remarkable regenerating capabilities, making dermal fibroblast therapy crucial in cell-based and skin regenerative treatments. Nevertheless, additional research is required for more disorders and cosmetic applications.

Abstract VEXAS syndrome, an uncommon yet severe autoimmune disorder stemming from a mutation in the UBA1 gene, is the focus of this paper. The overview encompasses its discovery, epidemiological traits, genetic underpinnings, and clinical presentations. Delving into whether distinct genotypes yield varied clinical phenotypes in VEXAS patients, and the consequent adjustment of treatment strategies based on genotypic and clinical profiles necessitates thorough exploration within the clinical realm. Additionally, the current therapeutic landscape and future outlook are examined, with particular attention to the potential therapeutic roles of IL-6 inhibitors and JAK inhibitors, alongside an elucidation of prevailing limitations and avenues for further research. This study contributes essential theoretical groundwork and clinical insights for both diagnosing and managing VEXAS syndrome.

Concern over microplastics (MPs) in the environment is rising. Microplastics are generally known to exist in aquatic settings, but less is known about their occurrence in soil ecosystems. When plastic waste builds up in agricultural areas, it can have a negative impact on the environment and food sources, as well as have an indirect effect on all trophic levels of the food chain. This paper addresses the relationship between microplastics and the management of plastic waste, which contributes to their accumulation, and it describes the sources and the movement processes of microplastics in agricultural soils as a result of natural events and disasters. Evaluating the impact of weather on coastal microplastic contamination is critical, as extreme weather events have become more frequent in recent years. This study sheds light on how weather patterns affect the dispersion of plastic waste in terrestrial habitats, including the impacts of seasonality and extreme weather. According to the results of this review, typhoons, monsoons, rainfall, and floods contribute significantly more microplastics to the surface sediment through surface runoff and wind transport, particle redistribution caused by agitated waves, and fragmentation under intense abrasion forces. Severe weather conditions have the potential to disperse larger and more varied kinds of microplastics.

The Tea Leaf Paradox (TLP) describes unsteady fluid motions which help entrain and deposit suspended particles at the center of rotation. Various applications depend on the TLP for particle separations—spanning orders of magnitude in length scales—making it an important problem in fluid mechanics. Despite papers describing the phenomenon, the efficacy of particle separation using the TLP remains unclear as to the relative importance of, for example, hydrostatics, particle-fluid density ratio, wall friction, liquid bath aspect ratio and the rotation speed. The dynamics involved are notably complex and require a careful tuning of each variable. In this study, we have investigated the role of the limit of the aggregation dynamics in rotational flows within 3D-printed vessels of various sizes in tandem with particle imaging to probe the dissipation effects on the particle motions. We have found that the liquid bath aspect ratio limits how much aggregation may occur for a particle-fluid density ratio greater than unity (e.g., ρp/ρf>1), where ρp is the density of the particle and ρf is the ambient fluid density.

The paper presents research results of the synthesis, phase composition, and structure of products obtained by highly exothermic reactions between Ti and C10H8O4 mixture components, depending on the plastic waste concentration and Ti powder dispersiveness, density of initial samples, and synthesis medium. The dependence of the phase composition and structure of the synthesis products on the concentration of the polymer (plastic) component in the initial Ti -PET (C10H8O4) system was found. When the plastic waste content is 20 wt% to 25 wt%, synthesis products contain TiC0.5O0.5–TiC0.6–0.75 particle agglomerates. Further growth in the polyethylene terephthalate content from 30 wt% to 45 wt% leads to the formation of synthesis products consisting of titanium carbide (TiC0.6–1.0). The gaseous byproduct composition of the exothermic reaction is investigated for the Ti–C10H8O4 mixture composition. It is found that the gaseous by-product mostly contains hydrogen and carbon monoxide as well as impurities of different hydrocarbons (methane, acetylene, ethane, ethene) and carbon dioxide. The maximum adiabatic temperature of the gas combustion temperature is 2080 oC, which demonstrates the possibility of using gas as a fuel for energy generation devices. Based on the data obtained, it is possible to create a basis for a new plastic waste technology to fabricate carbide-containing materials.

With the intensifying challenge of global warming driven largely by anthropogenic activities, effective greenhouse gas capture techniques are critical. This paper focuses on the role of deep eutectic solvents (DES) as promising agents for such capture at the source. We review the key DES-based methods for greenhouse gas capture, drawing conclusions from a thorough analysis of the existing literature. In particular, we examine the effect of DES structure on gas solubilities and explore the mechanism of gas solubility in DES through molecular simulation. We present a synthesis of state-of-the-art results in this area, assessing the potential of DES as an alternative to current industrial gas capture methods. Furthermore, we propose future research directions for the design of novel DES tailored to more specific applications.

The utilization of bismuth as a sensing material for the detection of heavy metal ions has gained significant attention due to its exceptional interfacial activity and selective absorption properties. However, it also poses challenges in terms of agglomeration and its inferior electrical conductivity during the synthesis process. This paper employed a facile in situ synthesis and electrodeposition approach to uniformly grow a bismuth film on a conductive carbon cloth, designated as Bi/Ag@CC. The Bi/Ag@CC electrode material exhibited benign electrochemical properties, enabling its application for detecting Pb2+ in tap water and lake water samples. Furthermore, this work investigated the impact of electrochemical parameters, including electrolyte pH, deposition potential and pre-enrichment time, on the detection performance. The results demonstrated the sensor’s wide linear range (from 20 to 400 ppb) and detection limits (0.15 ppb) for heavy metal ion detection, along with excellent anti-interference capabilities and satisfactory repeatability, with an RSD of less than 2.31% (n = 6). This paper offers a novel strategy for positioning the bismuth-based composite as a promising candidate for practical electrochemical sensing applications.

The dynamic behaviour of a spring-mounted symmetrical NACA0012 wing in a freestream flow of air is studied in the pre-stall region, over 0° to 12° angles of incidence. The primary aim of this work is for use within the automotive sector to reduce drag and fuel emissions. However, this work will also be of interest in the motorsport sector to improve performance, and also have some applications within the aerospace and renewable energy sectors. The general operation of the concept has previously been verified at these low angles in the pre-stall region with that of a theoretical estimation using finite and infinite wings. This paper provides a numerical solution of the same problem and is compared with the previous experimentation. At these low angles, the computations yield a dynamic response settling into a static equilibrium. The stable solutions match the start of a steady regime well, when compared with the experiment. The trends are also comparable with the experiment, but the velocities at which they occur are underestimated in the computation. The computations demonstrate a drag reduction of 59% when compared to a fixed wing, whereas the lift remains stable at a near constant value with increasing wind speed. Thence, downforce is maintained whilst drag is reduced, which will facilitate higher speeds on the straight whilst maintaining vehicle direction stability. Limitations to this proof-of-concept work are highlighted and future development work is suggested to achieve even further increases in performance.

In this paper, we consider the flow of a nanofluid in an enclosed lid-driven cavity using a single-phase model. Two cases are considered: one in which the top and bottom walls are kept at adiabatic conditions, and a second case in which the left- and right-side walls are kept in adiabatic conditions. The impact of different viscosity models on the mixed convection heat transfer is examined, and numerical methods are used to obtain solutions for the Navier–Stokes equations for various parameter ranges. Using our robust methods, we are able to obtain novel solutions for large Reynolds numbers and very small Richardson numbers. Using water as the base fluid and aluminium oxide nanoparticles, our results suggest that heat transfer enhancement occurs with increasing particle concentration and decreasing Richardson numbers. There are also significant differences depending on the viscosity model used in terms of the impact of reducing corner recirculation regions in the cavity.

Abstract Genomic alterations in tumors play a pivotal role in determining their clinical trajectory and responsiveness to treatment. Targeted panel sequencing (TPS) has served as a key clinical tool over the past decade, but advancements in sequencing costs and bioinformatics have now made whole-genome sequencing (WGS) a feasible single-assay approach for almost all cancer genomes in clinical settings. This paper reports on the findings of a prospective, single-center study exploring the real-world clinical utility of WGS (tumor and matched normal tissues) and has two primary objectives: (1) assessing actionability for therapeutic options and (2) providing clarity for clinical questions. Of the 120 patients with various solid cancers who were enrolled, 95 (79%) successfully received genomic reports within a median of 11 working days from sampling to reporting. Analysis of these 95 WGS reports revealed that 72% (68/95) yielded clinically relevant insights, with 69% (55/79) pertaining to therapeutic actionability and 81% (13/16) pertaining to clinical clarity. These benefits include the selection of informed therapeutics and/or active clinical trials based on the identification of driver mutations, tumor mutational burden (TMB) and mutational signatures, pathogenic germline variants that warrant genetic counseling, and information helpful for inferring cancer origin. Our findings highlight the potential of WGS as a comprehensive tool in precision oncology and suggests that it should be integrated into routine clinical practice to provide a complete image of the genomic landscape to enable tailored cancer management.

Breast cancer is one of the leading causes of cancer-related deaths among females and accounts for around 25% of all female melanomas worldwide with increasing incidence every day. Among various natural phytochemicals studied against breast cancer, curcumin has been found to possess antioxidative properties with established safety record. Curcumin is a pleiotropic molecule possessing chemopreventive and chemotherapeutic properties. Curcumin arrests cancer formation at various stages ranging from transformation, proliferation as well as invasion. Transformation is arrested by constitutive de-activation of transcription factors like STAT 3, AP-1, NF-kB. Curcumin controls the expressions of oncogenes, growth factor like EGF, PGDF, FGF, decoy receptors, cyclin D1, survival factors that are important for tumoral cell proliferation. Curcumin successfully inhibits tumor metastasis by supressing the expression of matrix metalloproteinase, COX 2, adhesion molecules, Chemokines and TNF. Curcumin has revealed anticancerous effects in synergism with various compounds like piperine, genistein, mitomycin C, phosphatidicholine, monomethoxy polyethylene glycol, epigallocatechin gallate and metformin. Recent studies have attempted to study the efficacy of curcumin loaded nanoparticles as drug delivery system. This paper attempts to review the work on antitumoral effects of curcumin against breast cancer, underlying mechanisms and proposes further investigations that are needed for rational cancer therapy.

Wheat and barley can be massively invaded with Fusarium head blight (FHB) which results in decrease in grain weight and quality. Accurate evaluation of the stress-physiological status including quantitative resistance (QR) and aggressiveness in breeding programs is a key to selecting resistant cultivars. Out of several analyzed components, one or two metric components composing a disease index are commonly employed as a typical methodology to score FHB; however, this resistance index can not describe correctly and accurately the whole resistance in host plants. We have therefore assessed a novel index to estimate the physiological and pathogenic status in a set of diverse bread and durum wheat and barley cultivars under artificial infection with four Fusarium species. Eighteen QR components obtained under in vitro, growth camber and field conditions were evaluated and nine components at the earliest and latest growth stages were selected and combined in one index to score QR. This novel index was further investigated for its stability in the same fungi-seedling and -adult plants treated with silicon that reduced these nine pathogenic components forming this index. The scores of our index were highly significant and correlated with data of reductions resulted in silicon treatments across the bread and durum wheat and barley cultivars, thus it is suitable to be used for quantification of resistance in host plants and aggressiveness of Fusarium isolates. Findings show that the novel index analyzed in the present report captured key components of quantitative wheat and barley resistance. This index can be applied for screening the most aggressive isolates of different FHB species for FHB resistance breeding of wheat and barley. The mean of nine disease components is introduced in this paper as a new index for QR in plants and aggressiveness of fungi. Moreover, the novel index could be a starting point for more correct techniques for assessing on of the most damaging biotic stresses on cereals, FHB.

Large quantities of hemp hulls can be completely utilized for creation of value-added products (cost effective biofuels and biochemicals) through a biorefinery approach. A sustainable approach in making xylose, a low calorie sweetener and high surface area activated carbons (AC) for super capacitors, attracts interest. The AC when leveraged as a co-product from biorefinery process makes it more cost effective and, in this paper, we discuss the production of xylose and AC from hemp seed hull with methane sulphonic acid (MSA) hydrolysis. Xylose recovery with MSA hydrolysis was 25.15 g/L when compared to the traditional sulphuric acid (SA) hydrolysis of 19.96 g/L at the same acid loading of 1.8 %. The scanning electron microscope (SEM) images and Fourier transform infrared (FT-IR) spectra indicate partial delignification along with hemicellulose hydrolysis responsible for high xylose recovery. Post hydrolysis fibers were KOH activated and carbonized to make AC. The MSA hydrolyzed and KOH activated fiber produced pure, fluffier and finer particle AC with a drastic increase in surface area 1 452 m2/g when compared to SA hydrolyzed of 977 m2/g. These results indicate the potential of MSA in dilute acid hydrolysis of biomass for xylose recovery and production of high surface area activated carbon. From a production standpoint this can lead to increased use of sustainable low-cost agricultural biomass for making high surface area AC as components in supercapacitors.

The change of temperature, humidity and moisture content (MC) will lead to the change of mechanical properties of molded fiber products (MFP). However, it is difficult to decouple the effects of temperature, humidity and MC on the mechanical properties of MFP, and predict the mechanical properties of MFP during the use. In this study, the laws and mechanism of mechanical properties of MFP with ambient temperature, humidity and MC were studied. The results showed that the direct effect of temperature (20−70 °C) on mechanical properties of MFP was insignificant, and the mechanical properties of MFP were mainly changed by MC. The MC was related to ambient temperature and humidity, and the relationship between the three could be described by the modified Guggenheim-Anderson-de Boer (GAB) model (20−70 °C and 30 %–90 % relative humidity). With the increase of MC, the elastic modulus and fracture strain was increased and decreased linearly, the yield strength and failure strength were presented GaussAmp laws, and the failure strain was presented asymptotic regressed distribution law. Two fracture modes of MFP, brittle fracture and ductile fracture, were revealed by the scanning electron microscopy of the mesoscopic fiber structure of sugarcane bagasse molded fiber products. The mathematical models and the changes of fiber structure were verified by wheat straw molded fiber products and waste paper molded fiber products. This study was contributed to understand the effects and mechanism of the change of temperature, humidity and MC on the mechanical properties of MFP.

Abstract Serine is a key contributor to the generation of one-carbon units for DNA synthesis during cellular proliferation. In addition, it plays a crucial role in the production of antioxidants that prevent abnormal proliferation and stress in cancer cells. In recent studies, the relationship between cancer metabolism and the serine biosynthesis pathway has been highlighted. In this context, 3-phosphoglycerate dehydrogenase (PHGDH) is notable as a key enzyme that functions as the primary rate-limiting enzyme in the serine biosynthesis pathway, facilitating the conversion of 3-phosphoglycerate to 3-phosphohydroxypyruvate. Elevated PHGDH activity in diverse cancer cells is mediated through genetic amplification, posttranslational modification, increased transcription, and allosteric regulation. Ultimately, these characteristics allow PHGDH to not only influence the growth and progression of cancer but also play an important role in metastasis and drug resistance. Consequently, PHGDH has emerged as a crucial focal point in cancer research. In this review, the structural aspects of PHGDH and its involvement in one-carbon metabolism are investigated, and PHGDH is proposed as a potential therapeutic target in diverse cancers. By elucidating how PHGDH expression promotes cancer growth, the goal of this review is to provide insight into innovative treatment strategies. This paper aims to reveal how PHGDH inhibitors can overcome resistance mechanisms, contributing to the development of effective cancer treatments.

Abstract Stargardt disease (STGD) is the most common form of inherited juvenile macular dystrophy and is caused by sequence variants in the ABCA4 gene. Due to its genetic complexity and phenotypic variability, STGD poses significant therapeutic challenges. In the past decade, a lot of progress has been made regarding our understanding of the molecular and clinical aspects of STGD, along with its mechanisms. This has led to the development of new therapies, and there are human clinical trials currently ongoing. This paper evaluates the emergence of pharmacological approaches targeting the visual cycle to mitigate retinal damage, the role of gene therapy in correcting specific genetic defects, and the use of stem cell therapies aimed at retinal regeneration by showcasing the latest clinical trials and precision medicine approaches.

Abstract Radiotherapy is a widely used cancer treatment that utilizes powerful radiation to destroy cancer cells and shrink tumors. While radiation can be beneficial, it can also harm the healthy tissues surrounding the tumor. Recent research indicates that the microbiota, the collection of microorganisms in our body, may play a role in influencing the effectiveness and side effects of radiation therapy. Studies have shown that specific species of bacteria living in the stomach can influence the immune system’s response to radiation, potentially increasing the effectiveness of treatment. Additionally, the microbiota may contribute to adverse effects like radiation-induced diarrhea. A potential strategy to enhance radiotherapy outcomes and capitalize on the microbiome involves using probiotics. Probiotics are living microorganisms that offer health benefits when consumed in sufficient quantities. Several studies have indicated that probiotics have the potential to alter the composition of the gut microbiota, resulting in an enhanced immune response to radiation therapy and consequently improving the efficacy of the treatment. It is important to note that radiation can disrupt the natural balance of gut bacteria, resulting in increased intestinal permeability and inflammatory conditions. These disruptions can lead to adverse effects such as diarrhea and damage to the intestinal lining. The emerging field of radiotherapy microbiome research offers a promising avenue for optimizing cancer treatment outcomes. This paper aims to provide an overview of the human microbiome and its role in augmenting radiation effectiveness while minimizing damage.

Abstract Vascular tissue engineering is a promising approach for regenerating damaged blood vessels and developing new therapeutic approaches for heart disease treatment. To date, different sources of cells have been recognized that offer assistance within the recovery of heart supply routes and veins with distinctive capacities and are compelling for heart regeneration. However, some challenges still remain that need to be overcome to establish the full potential application of these cells. In this paper, we review the different cell sources used for vascular tissue engineering, focusing on extraembryonic tissue-derived cells (ESCs), and elucidate their roles in cardiovascular disease. In addition, we highlight the intricate interplay between mechanical and biochemical factors in regulating mesenchymal stem cell (MSC) differentiation, offering insights into optimizing their application in vascular tissues.

Organic Rankine Cycle (ORC)–based small-scale power plants are becoming a promising instrument in the recent drive to utilize renewable sources and reduce carbon emissions. But the effectiveness of such systems is limited by the low efficiency of gas expanders, which are the main part of an ORC system. Limaçon-based expansion machines with a fast inlet control valve have great prospects as they could potentially offer efficiencies over 50%. However, the lack of a highly reliable and significantly fast control valve is hindering its possible application. In this paper, a push–pull solenoid valve is optimized using a stochastic optimization technique to provide a fast response. The optimization yields about 56–58% improvement in overall valve response. A performance comparison of the initial and optimized valves applied to a limaçon expander thermodynamic model is also presented. Additionally, the sensitivity of the valve towards a changing inlet pressure and expander rotor velocity is analyzed to better understand the effectiveness of the valve and provide clues to overall performance improvement.

The environmental impact of tire wear emissions has become increasingly apparent, and efforts to reduce their impact on the environment are on the rise. To minimise the generation of tire wear, it is essential to consider the influencing factors. However, as it cannot be entirely prevented, measures to reduce immissions are also necessary. This paper summarises possible measures derived from the literature, stakeholder workshops, and the authors’ own conclusions, taking into account the different perspectives: tire, vehicle, road, sustainable mobility and emissions treatment. The presentation of the entry paths of tire wear into the environment and the hotspots of generation can be used to prioritise reduction measures. Measures should be implemented at a political level, technical solutions applied, and awareness raised among the general public. It is evident that reducing tire wear is a complex task that requires a transdisciplinary approach.

Abstract Despite recent advances in tumor diagnosis and treatment technologies, the number of cancer cases and deaths worldwide continues to increase yearly, creating an urgent need to find new methods to prevent or treat cancer. Sulforaphane (SFN), as a member of the isothiocyanates (ITCs) family, which is the hydrolysis product of glucosinolates (GLs), has been shown to have significant preventive and therapeutic cancer effects in different human cancers. Early studies have shown that SFN scavenges oxygen radicals by increasing cellular defenses against oxidative damage, mainly through the induction of phase II detoxification enzymes by nuclear factor erythroid 2-related factor 2 (Nrf2). More and more studies have shown that the anticancer mechanism of SFN also includes induction of apoptotic pathway in tumor cells, inhibition of cell cycle progression, and suppression of tumor stem cells. Therefore, the application of SFN is expected to be a necessary new approach to treating cancer. In this paper, we review the multiple molecular mechanisms of SFN in cancer prevention and treatment in recent years, which can provide a new vision for cancer treatment.

There is an increasing need to reduce the use of pesticides to reduce their potential threat to food/environmental safety. At the same time, an increase in reactive oxygen species (ROS) induced by abiotic stresses in plants can lead to an increase in ROS in the plant and affect yield. In this paper, ROS-SPC was synthesised by two reactions and used as an efficient pesticide nanocarrier/adjuvant and scavenger of reactive oxygen species (ROS) in plants. By hydrophobic interaction, ROS-SPC spontaneously conjugated to fluazinam with a pesticide loading capacity (PLC) of 15.1 %. After fluazinam was conjugated to ROS-SPC, the particle size of fluazinam was reduced from 64.70 nm reduced to 19.82 nm, and the contact angle of pesticide droplets on plant leaves was significantly reduced from 59.44° to 26.76°. ROS-SPC as a carrier was tested to inhibit phytopathogenic fungi by 200 % more than conventional delivery methods. In addition, we also learned that ROS-SPC with endocytosis capability can indeed remove reactive oxygen species from plants. Tests using HUVEC cells showed that ROS-SPC has low cytotoxicity within a reasonable range of applications, and ROS-SPC was tested to have low toxicity to pollinating bees.

The latest study published in Nature by Andrew R. Burns, Peter J. Roy and co-authors is highlighted in this paper, they investigated a series of novel nematicidal compounds, including Selectivin-A and Selectivin-E, and explored their mechanism of action. Experiments have displayed that the Selectivin compound is inactive to human cells, fish, fungi, insects and even beneficial nematodes. In the exploration of its mechanism of action, it was found that the mechanism of action of Selectivin is different with those of commercial nematocides: Selectivin needs to be activated by biotin produced by nematodes, after that they can be transformed into compounds with high nematicidal activity. This proves that the family of Selectivin compounds has the advantages of high selectivity and environmental friendliness, and their mechanism of action is completely new, proposing a completely new path for the development of new nematicides.

Non-methane hydrocarbons (NMHCs) are a common type of volatile organic compounds (VOCs) pollutant in the petrochemical industry and have attracted widespread attention because of their adverse health effects and environmental impacts. In this paper, we report a new porous slurry formed with zeolitic imidazolate framework-8 (ZIF-8) and iso-hexadecane to capture the low-concentration and multi-component NMHCs (mainly ethane (C2H6), propane (C3H8), and n-butane (n-C4H10)) from the oil field exhaust. The sorption capacity of C2H6 in the slurry is significantly higher than that of nitrogen (N2) and methane (CH4). Moreover, the slurry demonstrated a clear advantage for C2H6 over N2 and CH4 in competitive adsorption through the pressure-drop curves. In the NMHCs capture experiments, the C3H8 and n-C4H10 concentrations after purification can be reduced to below 100 ppm, while the C2H6 concentration can reach approximately 180 ppm. More encouragingly, in the breakthrough tests, the slurry exhibits a perfect kinetic separation selectivity for multi-component NMHCs. Furthermore, to avoid structural collapse of ZIF-8 material during long-term use in acidic and wet environments, a certain amount of 2-methylimidazole was retained in the slurry as a protective agent in the material synthesis process. In this way, the ZIF-8 materials in the slurry can retain the stable characteristic structure in an aqueous and acidic environment and keep the capture capacity for NMHCs without degradation. We believe the porous ZIF-8/iso-hexadecane slurry is a promising capture agent for low-concentration and multi-component NMHCs with strong purification capacity and stability.

Metal-organic frameworks (MOFs) are favored in the fields of adsorption, separation, catalysis, electrochemistry, and magnetism due to their advantages of large specific surface area, high porosity, controllable pore size adjustment, and dispersion of metal active sites. The application of MOFs involves multiple fields, which requires that MOFs have good water stability, as gaseous and liquid water inevitably exist in industrial processes. In this paper, the research status of the stability of MOFs in aqueous solutions was reviewed in recent years, including the design and synthesis, the influencing factors, and the applications of MOFs in water stability.

Background: The year 2023 has witnessed unprecedented advancements in orthodontic treatments, offering patients an enhanced level of comfort, efficiency, and effectiveness in dental care. This systematic review aims to identify the recent developments in the field of orthodontics and discuss their performance about clinical application. Methods: The literature for this paper was identified and selected by performing a thorough search in electronic databases like PubMed, Medline, Embase, Cochrane, Google Scholar, Scopus, Web of Science, published over the past five years. Literature reviews, systematic reviews, and meta-analyses from January 2019– December 2023 were included in the study. Recent original articles within the past five years related to orthodontic advancements were also included in the study. After applying inclusion and exclusion criteria, 26 articles were scrutinized, studied, and then critically analyzed. Quality analysis was performed using QUADAS-2. Results: This study reveals that technological advancement and research in the field of orthodontics is getting pace. The field of orthodontics has embraced state-of-the-art technology, including digital orthodontics, customized clear aligners, accelerated treatment options, AI, and robotic wire bending, to revolutionize smiles and improve oral health. Conclusion: As technological advancements persist in the trajectory; one can foresee imminent and revolutionary breakthroughs in the years ahead. This study will help and guide orthodontists to enhance their treatment strategies by keeping pace with the recent advancements in the field.

Complete dentures offer the replacement of all missing teeth and surrounding tissues. Replacing the entire arch of missing teeth, the prosthesis is exclusively tissue-supported. Adapting a spacer during removable complete denture impression-making is one of the important steps. The success and failure of complete denture therapy are largely dependent upon the method by which the clinician records impressions. Many theories of impression have been proposed and the selective-pressure technique is one of the most widely used theories and has been used successfully. During the selective pressure technique, custom trays with different designs and materials spacers are used so that vulnerable tissues are relieved of undue stresses while stress-bearing areas are utilized properly. The current paper mainly describes some of the conventional wax spacers that may be used during impression making of removable complete denture prostheses.

The evolution of methicillin-resistant Staphylococcus aureus (MRSA) has required the development of new antimicrobial agents and new approaches to prevent and overcome drug resistance. AntiMicrobial Peptides (AMPs) represent promising alternatives due to their rapid bactericidal activity and their broad-spectrum of action against a wide range of microorganisms. The amphibian Temporins constitute a well-known family of AMPs with high antibacterial properties against both Gram-positive and Gram-negative bacteria. In this paper, we evaluated the in vivo effect of Temp-L on S. aureus performing morphological studies using Transmission Electron Microscopy (TEM) that revealed the occurrence of protrusions from the cell surface. The formation of vesicle-like structure was confirmed by Dynamic Light Scattering (DLS). The global effect of Temp-L on Staphylococcus aureus (S. aureus) was deeply investigated by differential proteomics leading to the identification of up-regulated proteins involved in the synthesis of the cell membrane and fatty acids, and down-regulated virulence factors. GC-MS analysis suggested a possible protective response mechanism implemented by the bacterium after treatment with Temp-L, as the synthesis of fatty acids was increased. Adhesion and invasion assays on eukaryotic cells confirmed a reduced virulence of S. aureus following treatment with Temp-L. These results suggested the targeting of virulence factors as novel strategy to replace traditional antimicrobial agents that can be used to treat infections, especially infections caused by the resistant pathogen S. aureus.

Protein tyrosine phosphatases (PTP) have emerged as targets in diseases characterized by aberrant phosphorylations such as cancers. The activity of the phosphatase of regenerating liver 3, PRL3, has been linked to several oncogenic and metastatic pathways, particularly in breast, ovarian, colorectal, and blood cancers. Development of small molecules that directly target PRL3, however, has been challenging. This is partly due to the lack of structural information on how PRL3 interacts with its inhibitors. Here, computational methods are used to bridge this gap by evaluating the druggability of PRL3. In particular, web-based pocket prediction tools, DoGSite3 and FTMap, were used to identify binding pockets using structures of PRL3 currently available in the Protein Data Bank. Druggability assessment by molecular dynamics simulations with probes was also performed to validate these results and to predict the strength of binding in the identified pockets. While several druggable pockets were identified, those in the closed conformation show more promise given their volume and depth. These two pockets flank the active site loops and roughly correspond to pockets predicted by molecular docking in previous papers. Notably, druggability simulations predict the possibility of low nanomolar affinity inhibitors in these sites implying the potential to identify highly potent small molecule inhibitors for PRL3. Putative pockets identified here can be leveraged for high-throughput virtual screening to further accelerate the drug discovery against PRL3 and development of PRL3-directed therapeutics.