Search

Increasing temperature can enhance the geographical spread and behavior of disease vector mosquitoes, exposing vulnerable populations to Aedes-borne viruses and infections. To address this risk, cost-effective and sustained intervention vector control tools are required, such as volatile pyrethroid spatial repellents. This study used a high-throughput screening system toxicity bioassay to determine the discriminating concentrations of transfluthrin-treated filter papers with variable air-drying times exposed to pyrethroid-susceptible Aedes aegypti mosquitoes. At the highest transfluthrin concentration (0.01706%), a significant reduction in mosquito mortality was observed in filter papers air-dried for 24 h compared to those air-dried for 1 h (odds ratio = 0.390, p < 0.001, 95% confidence interval: 0.23–0.66). Conversely, no significant difference in mortality was found between filter papers air-dried for 1 h and those air-dried for 12 h (odds ratio = 0.646, p = 0.107, 95% confidence interval: 0.38–1.10). The discriminating concentration was 2.8-fold higher for transfluthrin-treated filter papers air-dried for 24 h than it was for papers air-dried for 1 h, and it increased 5-fold from 1 h to 336 h of air-drying. These results show that the optimal air-drying period of transfluthrin-treated filter paper is critical, as higher discriminating concentration values may lead to underestimations of insecticide resistance. The instability of transfluthrin-treated papers necessitates the use of the World Health Organization (WHO) bottle bioassay, which is the preferred method for determining mosquito susceptibility to volatile insecticides.

This hypothesis demonstrates that the efficiency of loop-mediated isothermal amplification (LAMP) for nucleic acid detection can be positively influenced by the preconcentration of microbial cells onto hydrophobic paper surfaces. The mechanism of this model is based on the high affinity of microbes towards hydrophobic surfaces. Extensive studies have demonstrated that hydrophobic surfaces exhibit enhanced bacterial and fungal adhesion. By exploiting this inherent affinity of hydrophobic paper substrates, the preconcentration approach enables the adherence of a greater number of target cells, resulting in a higher concentration of target templates for amplification directly from urine samples. In contrast to conventional methods, which often involve complex procedures, this approach offers a simpler, cost-effective, and user-friendly alternative. Moreover, the integration of cell adhesion, LAMP amplification, and signal readout within paper origami-based devices can provide a portable, robust, and highly efficient platform for rapid nucleic acid detection. This innovative hypothesis holds significant potential for point-of-care (POC) diagnostics and field surveillance applications. Further research and development in this field will advance the implementation of this technology, contributing to improved healthcare systems and public health outcomes.

The paper wasp Polistes dominula is a thermophilic species originating from the Mediterranean climate, but is now widely spread in Europe. They live in quite differing habitats; and as synanthropic species, they have been established in human settlement areas. They build a single small comb at protected places with a favorable microclimate. We measured the temperature of the wasps, the nests and their environment at typical nesting sides in Austria (Europe) in the temperate climate, in order to reveal relationships between nest and body temperature and the habitats’ microclimate. The temperatures of the comb and of the wasps’ body were in a wide range (~20–37 °C) above the ambient air temperature at the nest. This is an advantage as higher temperatures accelerate the development speed of the brood. However, the mean comb temperature did not exceed approximately 38.6 °C. This was managed by cooling efforts of the adult wasps. The ambient air temperature near the nest (~1–2 cm) was always clearly elevated above the ambient air temperature at a local standard weather station in the habitat. A comparison with climate-model-generated macroclimate data revealed the necessity of measuring microclimate data for a reliable description of the insects’ thermal environment.

In the realm of life sciences, the journal ‘Life’ has consistently served as a beacon for groundbreaking research and scientific discovery [...]

In recent times, there has been a notable surge in the interest in promoting environmentally conscious products, particularly within the building industry where the focus has shifted towards sustainable materials. In this study, as a sustainable building material, ceiling tiles have been fabricated as a composite board containing waste materials, namely waste paper, sawdust, recycled polyethylene terephthalate (PET), and epoxy resin, and characterized comprehensively through physical and mechanical tests, density, thickness swelling (TS), modulus of elasticity (MOE), modulus of rupture (MOR), and flexural strength (FS) for product stability. A total of nine composites were fabricated with different ratios through molding techniques, and the characterization results were compared to determine the optimized stable ratio of composite composition. The composition of 25% waste paper, 15% sawdust, 10% recycled PET, and 50% epoxy resin presented the maximum FS compared to the other composite ratios. Water absorption (WA) and thickness swelling were evaluated after immersion durations of 1–24 h. The findings revealed that as the density increased, the sawdust content within the matrix decreased from 25–35%. Concurrently, an increase in recycled PET content resulted in decreased water absorption and thickness swelling. Significantly, the MOE, MOR, and FS demonstrated optimal values at 864.256 N/mm2, 12.786 N/mm2, and 4.64 MPa, respectively. These observations represent the excellent qualities of this hybrid composite board, particularly in terms of sustainability, stability, and water absorption capacity. Moreover, its lightweight nature and ability to support ceiling loads further enhance its appeal for construction applications. This study not only advances the discourse on sustainable construction materials but also fosters opportunities for broader acceptance and innovation within the industry.

We propose a unique form of dye-sensitized solar cells (DSSCs), paper DSSCs based on carbon-nanotube (CNT) composite papers, and the use of a gel electrolyte for the paper DSSC. In our previous study, we succeeded in developing the paper DSSC. However, its performance and lifetime were not sufficient. We considered that the problem was the use of liquid-type electrolyte. To improve the performance of the paper DSSC, a gel electrolyte was introduced to increase safety and durability. Here, a polymer gel electrolyte was synthesized using a copolymer of polyethylene glycol (PEG) and polyvinylidene fluoride (PVDF) as a matrix, mixed with iodine and potassium iodide. The resulting paper DSSC had a fill factor (FF, a performance indicator) of 0.248 and a conversion efficiency of 2.43 × 10−5% with an extended working time (lifetime) of more than 110 min. Further modifications were made to the metallic CNT composite paper and the gel electrolyte, resulting in an increased conversion efficiency of 2.02 × 10−3%. This study suggests the potential of gel electrolytes in enhancing the performance of paper DSSCs, providing new insights for their future applications.

With the overarching aim for the development of sustainable, nontoxic wet strength agents for paper, a novel polymer gel system based on oxidized hydroxypropyl cellulose (keto-HPC) cross-linked with polyamines was investigated in detail to gain a deeper insight into the wet strength mechanism. When applied to paper, this wet strength system significantly increases the relative wet strength by using only low amounts of polymer, and it is therefore comparable with established wet strength agents based on fossil resources, such as polyamidoamine epichlorohydrin resins. With the help of ultrasonic treatment, keto-HPC was degraded with respect to its molecular weight and further cross-linked in paper using polymeric amine-reactive counterparts. The resulting polymer-cross-linked paper mechanical properties were analyzed with respect to the dry and wet tensile strength, respectively. In addition, we analyzed the polymer distribution using fluorescence confocal laser scanning microscopy (CLSM). If high-molecular-weight samples are being used for cross-linking, we do find accumulation of the polymer mainly on the surface of the fibers and at fiber crossing points, accompanied with enhancing strong effects on paper’s wet tensile strength. In contrast, if low-molecular-weight (i.e., degraded) keto-HPC is being applied, the macromolecules are capable of entering the inner porous structure of the paper fibers, and almost no accumulation at the fiber crossing points is observed, which also results in a lowered wet paper tensile strength, respectively. This insight into wet strength mechanisms of the keto-HPC/polyamine system can thus lead to new opportunities for the development of alternative biobased wet strength agents where molecular weight dependence of the wet tensile properties allows for a fine tuning of mechanical properties in the wet state.

The research groups in computer vision, graphics, and machine learning have dedicated a substantial amount of attention to the areas of 3D object reconstruction, augmentation, and registration. Deep learning is the predominant method used in artificial intelligence for addressing computer vision challenges. However, deep learning on three-dimensional data presents distinct obstacles and is now in its nascent phase. There have been significant advancements in deep learning specifically for three-dimensional data, offering a range of ways to address these issues. This study offers a comprehensive examination of the latest advancements in deep learning methodologies. We examine many benchmark models for the tasks of 3D object registration, augmentation, and reconstruction. We thoroughly analyse their architectures, advantages, and constraints. In summary, this report provides a comprehensive overview of recent advancements in three-dimensional deep learning and highlights unresolved research areas that will need to be addressed in the future.

The purpose of the present study is to offer an optimal model to predict the tensile index of the paper being consumed to make veneer impregnated with different weight ratios of modified starch (from 3.18 to 36.8%) to urea formaldehyde resin (WR) containing different formaldehyde to urea molar ratios (MR, from 1.16:1 to 2.84:1) enriched by different contents of silicon nano-oxide (NC, from 0 to 4%) using multiple linear regression (MLR) and adaptive neuro-fuzzy inference system (ANFIS) and compare the precision of these two models to estimate the response being examined (tensile index). Fourier-transform infrared spectroscopy (FTIR) and transmittance electron microscopy (TEM) were also used to analyze the results. The results of studying the adhesive structure using FTIR analysis showed that as the WR increased to the maximum level and MR increased to the average level (3%), more ether and methylene linkage forms due to cross-linking. TEM analysis also indicated that if an average level of silicon nano-oxide is applied, there will be more cross-linking due to the more uniform distribution and suitable interactions between the adhesive and nanoparticles. The modeling results showed that the ANFIS model estimates have been closer to the actual values compared to the MLR model. It can be concluded that the model offered by ANFIS has a higher potential to predict the tensile index of the paper impregnated with the combined adhesive of UF resin and modified starch. However, the MLR model could not offer a good estimate to predict the response. According to the preferred approach to predict the most effective property of resin coated paper, modelling would be useful to the research community and the results are beneficial in industrial applications without spending more cost and time.

Gynes of paper wasps (Polistes sp.) spend the cold season in sheltered hibernacles. These hibernacles protect against predators and adverse weather conditions but offer only limited protection against low temperatures. During overwintering diapause, wasps live on the energy they store. We investigated the hibernacles’ microclimate conditions of species from the Mediterranean (Italy, P. dominula, P. gallicus) and temperate (Austria, P. dominula) climates in order to describe the environmental conditions and calculate the energetic demand of overwintering according to standard metabolic rate functions. The temperatures at the hibernacles differed significantly between the Mediterranean and temperate habitats (average in Austria: 3.2 ± 5.71 °C, in Italy: 8.5 ± 5.29 °C). In both habitats, the hibernacle temperatures showed variance, but the mean hibernacle temperature corresponded closely to the meteorological climate data. Cumulative mass-specific energetic costs over the studied period were the lowest for the temperate P. dominula population compared with both Mediterranean species. The lower costs of the temperate species were a result of the lower hibernacle temperature and acclimation to lower environmental temperatures. Model calculations with an increased mean temperature of up to 3 °C due to climate change indicate a dramatic increase of up to 40% in additional costs.

In this study, biodegradable slow-release fertilizer (SRF) hydrogels were synthesized from hydroxyl propyl methyl cellulose (HPMC), polyvinyl alcohol (PVA), glycerol and urea (SRF1) and HPMC, PVA, glycerol, urea and blended paper (SRF2). The fertilizer hydrogels were characterized by SEM, XRD and FTIR. The swelling capacity of the hydrogels in both distilled and tap water as well as their water retention capacity in sandy soil were evaluated. The hydrogels had good swelling capacity with maximum swelling ratio of 17.2 g/g and 15.6 g/g for SRF1 and SRF2 in distilled, and 14.4 g/g and 15.2 g/g in tap water, respectively. The water retention capacity of the hydrogels in sandy soil exhibited higher water retention when compared with soil without the (SRFs). The soil with the hydrogels was found to have higher water retention than the soil without the hydrogels. The slow-release profile of the hydrogels was also evaluated. The result suggested that the prepared fertilizer hydrogels has a good controlled release capacity. The blended paper component in SRF2 was observed to aid effective release of urea, with about 87.01% release in soil at 44 days compared to the pure urea which was about 97% release within 4 days. The addition of blended paper as a second layer matrix was found to help improve the release properties of the fertilizer. The swelling kinetic of the hydrogel followed Schott’s second order model. The release kinetics of urea in water was best described by Kormeye Peppas, suggesting urea release to be by diffusion via the pores and channels of the SRF, which can be controlled by changing the swelling of the SRF. However, the release mechanism in soil is best described by first order kinetic model, suggesting that the release rate in soil is depended on concentration and probably on diffusion rate via the pores and channels of the SRF.

The Gaussian wiretap channel with noncausal state interference available at the transmitter, which is also called the dirty paper wiretap channel (DP-WTC), has been extensively studied in the literature. Recently, it has been shown that taking actions on the corrupted state interference of the DP-WTC (also called the action-dependent DP-WTC) helps to increase the secrecy capacity of the DP-WTC. Subsequently, it has been shown that channel feedback further increases the secrecy capacity of the action-dependent DP-WTC (AD-DP-WTC), and a sub-optimal feedback scheme is proposed for this feedback model. In this paper, a two-step hybrid scheme and a corresponding new lower bound on the secrecy capacity of the AD-DP-WTC with noiseless feedback are proposed. The proposed new lower bound is shown to be optimal (achieving the secrecy capacity) and tighter than the existing one in the literature for some cases, and the results of this paper are further explained via numerical examples.

Recent morphological data on human brain development are quite fragmentary. However, they are highly requested for a number of medical practices, educational programs, and fundamental research in the fields of embryology, cytology and histology, neurology, physiology, path anatomy, neonatology, and others. This paper provides the initial information on the new online Human Prenatal Brain Development Atlas (HBDA). The Atlas will start with forebrain annotated hemisphere maps, based on human fetal brain serial sections at the different stages of prenatal ontogenesis. Spatiotemporal changes in the regional-specific immunophenotype profiles will also be demonstrated on virtual serial sections. The HBDA can serve as a reference database for the neurological research, which provides opportunity to compare the data obtained by noninvasive techniques, such as neurosonography, X-ray computed tomography and magnetic resonance imaging, functional magnetic resonance imaging, 3D high-resolution phase-contrast computed tomography visualization techniques, as well as spatial transcriptomics data. It could also become a database for the qualitative and quantitative analysis of individual variability in the human brain. Systemized data on the mechanisms and pathways of prenatal human glio- and neurogenesis could also contribute to the search for new therapy methods for a large spectrum of neurological pathologies, including neurodegenerative and cancer diseases. The preliminary data are now accessible on the special HBDA website.

The International Symposium on Remote Sensing 2021 (ISRS 2021) was held as a fully virtual meeting to provide all members of our community with the opportunity to participate in the annual ISRS event [...]

Remote sensing is currently showing high potential to provide valuable information at various spatial and temporal scales concerning natural hazards and their associated risks. Recent advances in technology and processing methods have strongly contributed to the development of disaster risk reduction research. In this Special Issue titled “Remote Sensing for Natural Hazards Assessment and Control”, we propose state-of-the-art research that specifically addresses multiple aspects of the use of remote sensing for natural hazards. The aim was to collect innovative methodologies, expertise, and capabilities to detect, assess monitor, and model natural hazards. In this regard, 18 open-access papers showcase scientific studies based on the exploitation of a broad range of remote sensing data and techniques, as well as focusing on a well-assorted sample of natural hazard types.

Two species of entomogenous fungi were discovered infecting the invasive paper wasp Polistes chinensis during an ecological study on Farewell Spit, New Zealand. We sequenced two nuclear ribosomal RDNA genes, the internal transcribed spacer (ITS) and the small ribosomal subunit 18S, and one protein-coding gene, the translation elongation factor 1-alpha (ef1 α). Combining sequence information with morphological examination, we identified these species as Beauveria malawiensis and Ophiocordyceps humbertii. We estimated that these fungi produce infection in approximately 3.3% of colonies in our study population. In bioassays, we successfully infected P. chinensis individuals from healthy colonies with B. malawiensis, with significant effects on adult mortality. This is the first record of both B. malawiensis and O. humbertii from Polistine hosts in New Zealand, and the first investigation into disease causality by these pathogens in P. chinensis. Our findings may contribute to the future development of biological control agents for paper wasps in New Zealand and elsewhere around the world.

Paper can be reused to efficiently manage biomass consumption, meaning that it has potential as an environmentally friendly material. On the other hand, because of high energy usage during the recycling process and transportation inefficiencies, there is a call for the development of technologies that can mitigate this environmental burden. This study evaluated, from a lifecycle perspective, a new technology that can collect and recycle paper within the office. This technology can reduce by over 90% the amount of water used compared with the conventional recycled paper that is pulped and bleached once by the dry process. It also eliminates transportation from paper collection facilities to recycling factories, reducing greenhouse gas emissions. This new technology is already in use in Japan, and analyses by user data indicate that evaluation results differ greatly depending on the utilization rate of the machine. In the future, environmental information should be shared by both users and manufacturers, so that users could increase their utilization rate, and manufacturers could develop alternative bonding agents in order to further reduce the total environmental burden.

Composite laminate recycling and waste disposal routes remain a burden to existing systems, requiring special treatment and separation. The inclusion of a plastic layer is important for several key properties that are required for food safety, which in turn has made these products exceptionally hard to substitute in food packaging. Yet, the continued use of non-degradable commodity plastics is unsustainable. In this research, we compare the four most promising biodegradable and bio-based plastics that could replace non-degradable plastics in laminates. Polyhydroxyalkanoate (PHA), polylactic acid (PLA), polybutylene succinate (PBS), and polybutylene succinate adipate (PBSA) were applied as a direct melt coating on porous cast hemp papers, and the final composite was compressed under three different loads: 0.5 MT, 1.5 MT, and 3.0 MT. To promote sustainable agriculture waste management, we opted to use cast paper made from ground hemp stalks. The formation of the composite structure was examined with scanning electron microscopy (SEM), while surface wetting on the paper side of the laminate was performed to understand structural changes induced by polymer impregnation into the paper layer. Mechanical performance properties were investigated with tensile and peel tests, and suitability for an extended range of temperatures was examined with dynamical mechanical analysis. An increase in compression pressure yielded up to a two-fold improvement in elastic modulus and tensile strength, while thermomechanical analysis revealed that the polymer’s transition into a viscoelastic state significantly affected the laminate’s storage modulus values. Biodegradation was performed in a controlled compost at 58 °C, resulting in full degradation within 40 to 80 days, with PLA and PHA laminates showing 40 and 50 days, respectively. Produced bioplastic laminates have a tremendous potential to replace polyolefin laminates in packaging applications.

Covering the full texts of all papers published in MDPI’s Remote Sensing between 2009 and 2021, in-depth scientometric analyses were conducted. Trends in publications show an increase in the overall number of papers. A relative increase in papers using SAR sensors and a relative decrease in papers using optical remote sensing can also be seen. The full-text analyses reveal distinctive styles and writing patterns for papers from different sub-fields of remote sensing and for different countries and even cities. While a slight increase in the readability of abstracts is detected over time, the overall readability of papers is decreasing. Institutional co-authorship analysis reveals the ongoing ‘scientific decoupling’ between China and the USA in remote sensing. Using scientometric full-text analysis, current trends and developments are revealed.

The 1st International Electronic Conference on Entomology (1IECE) was held between 1 and 15 July 2021 on the MDPI Sciforum platform organized and funded by the international journal Insects [...]

Paper wasps are widely distributed in Europe. They live in the warm Mediterranean, and in the harsh Alpine climate. Some species are very careful in their choice of nesting sites to ensure a proper development of the brood. We investigated microclimate conditions at the nests of three species (P. dominula, P. gallicus, P. biglumis) from differing climates, in order to characterize environmental conditions and conduct energetic calculations for an entire breeding season. The mean ambient nest temperature differed significantly in the Mediterranean, temperate, and Alpine habitats, but in all habitats it was about 2 to 3 °C above the standard meteorological data. The energetic calculations of adult wasps’ standard and active metabolic rate, based on respiratory measurements, differed significantly, depending on the measured ambient temperatures or the wasps’ body temperatures. P. gallicus from the warm Mediterranean climate exhibited the highest energetic costs, whereas P. biglumis from the harsh Alpine climate had the lowest costs. Energetic costs of P. dominula from the temperate climate were somewhat lower than those in the Mediterranean species, but clearly higher than those in the Alpine species. Temperature increase due to climate change may have a severe impact on the wasps’ survival as energetic costs increase.

On behalf of the Editor-in-Chief, Prof [...]

This paper deals with the design, preparation, and characterization of conductive and flexible nanopapers based on graphite nanoplates (GNP) and polydimethylsiloxane (PDMS). Highly porous GNP nanopapers were first prepared by filtration from a GNP suspension in a solvent. Subsequently, PDMS impregnation was carried out to obtain a composite material. By varying the concentration of the polymer solution and the deposition time, PDMS/GNP nanopapers were produced with a wide range of PDMS contents, porosities, and densities. Thermal diffusivity of the composite films (both in-plane and cross-plane) were measured and correlated with the structure of the nanopapers. Selected formulations were investigated in detail for their physical, thermal, and mechanical properties, exhibiting high flexibility and resistance to more than 50 repeated bendings, stiffness of up to 1.3 MPa, and thermal conductivity of up to 25 W/m∙K. Based on the properties obtained, the materials presented in this paper may find applications in modern lightweight and flexible electronic devices.

Coral reefs are an essential source of marine biodiversity, but they are declining at an alarming rate under the combined effects of global change and human pressure. A precise mapping of coral reef habitat with high spatial and time resolutions has become a necessary step for monitoring their health and evolution. This mapping can be achieved remotely thanks to satellite imagery coupled with machine-learning algorithms. In this paper, we review the different satellites used in recent literature, as well as the most common and efficient machine-learning methods. To account for the recent explosion of published research on coral reel mapping, we especially focus on the papers published between 2018 and 2020. Our review study indicates that object-based methods provide more accurate results than pixel-based ones, and that the most accurate methods are Support Vector Machine and Random Forest. We emphasize that the satellites with the highest spatial resolution provide the best images for benthic habitat mapping. We also highlight that preprocessing steps (water column correction, sunglint removal, etc.) and additional inputs (bathymetry data, aerial photographs, etc.) can significantly improve the mapping accuracy.

On behalf of the Editor-in-Chief, Prof [...]

The 9th Microwave and Radar Week (MRW 2020) was held in Warsaw the capital of Poland, on 5–7 October 2020 [...]

Resources is instituting the Best Paper Awards to recognize the outstanding papers published in the journal [...]

The 2019 International Symposium on Remote Sensing (ISRS-2019) took place in Taipei, Taiwan from 17 to 19 April 2019. ISRS is one of the distinguished conferences on the photogrammetry, remote sensing and spatial information sciences, especially in East Asia. More than 220 papers were presented in 37 technical sessions organized at the conference. This Special Issue publishes a limited number of featured peer-reviewed papers extended from their original contributions at ISRS-2019. The selected papers highlight a variety of topics pertaining to innovative concepts, algorithms and applications with geospatial sensors, systems, and data, in conjunction with emerging technologies such as artificial intelligence, machine leaning and advanced spatial analysis algorithms. The topics of the selected papers include the following: the on-orbit radiometric calibration of satellite optical sensors, environmental characteristics assessment with remote sensing, machine learning-based photogrammetry and image analysis, and the integration of remote sensing and spatial analysis. The selected contributions also demonstrate and discuss various sophisticated applications in utilizing remote sensing, geospatial data, and technologies to address different environmental and societal issues. Readers should find the Special Issue enlightening and insightful for understanding state-of-the-art remote sensing and spatial information science research, development and applications.

This paper presents the application of an energy characterization method based on the ISO 50001 standard in a dry paper production plant. This plant operates using electricity, gas, and coal as energy sources. The last two energy sources are used to produce the steam and hot air used in the paper drying process. Through energy characterization, indicators such as energy baseline and consumption indicators were calculated for the plant, with which improvement opportunities were identified. These improvement opportunities were used as case studies for each energy source used and were based on the actual state of the plant. 2011 Midpoint+ ILCD method data was selected from the Ecoinvent database, using OpenLCA 1.7.0 for the energy assessment. The impact categories analyzed in this study were ecotoxicity, eutrophication of rivers and seas, climate change, and human toxicity. As a result of this work, it was found that energy-saving was possible by adjusting the production rate to a load factor of 77%, which implies a gas consumption of 1.6 kWh/kg and a value in the climate change category of 88.5 kg of CO2 equivalent. In addition, some technological improvement opportunities were economical and environmentally evaluated as a result of the sustainable improvement strategy implemented with energy management and life cycle assessment. The study of these technological opportunities showed that in order to achieve a sustainable industrial process, it is important to take into account energy, economic, and environmental criteria in the continuous improvement of the paper production process. In addition, it is of vital importance to analyze alternatives for technological change, which have a greater impact than operational alternatives according to energy, environmental and economic criteria.

A highly crystalline ordered Cu-TiO2 nanostructure was synthesized using a simple paper template method using cupric nitrate and titanium isopropoxide as precursors. The structural study by XRD confirmed the formation of highly crystalline anatase phase of Cu-TiO2. The broad diffraction peaks of Cu-TiO2 exhibit the nanocrystalline nature of the product. The optical study by UV-DRS indicated the red shift in absorption wavelength with an increase in Cu doping, i.e., towards the visible region. The FE-SEM and FE-TEM study validated the formation of spherical shaped nanoparticles of Cu-TiO2 having sizes in the range of 20–30 nm. Considering the absorption in the visible region, the photocatalytic study was performed for water splitting and rhodamine-B (RhB) dye degradation under natural sunlight. The 2% Cu-doped TiO2 showed the highest photocatalytic hydrogen evolution, i.e., 1400 µmol·g−1·h−1 from water, among the prepared compositions. The photocatalytic performance of Cu-TiO2 conferred complete degradation of RhB dye within 40 min. The higher activity in both cases was attributed to the formation of highly crystalline ordered nanostructure of Cu-doped TiO2. This synthesis approach has potential to prepare other highly crystalline ordered nanostructured semiconductors for different applications.

European Polistine wasps inhabit mainly temperate and warm climate regions. However, the paper wasp Polistes biglumis represents an exception; it resides in mountainous areas, e.g., in the Alps and in the Apennines. In these habitats, the wasps are exposed to a broad temperature range during their lifetime. We investigated whether they developed adaptations in their metabolism to their special climate conditions by measuring their CO2 production. The standard or resting metabolic rate and the metabolism of active wasps was measured in the temperature range which they are exposed to in their habitat in summer. The standard metabolic rate increased in a typical exponential progression with ambient temperature, like in other wasps. The active metabolism also increased with temperature, but not in a simple exponential course. Some exceptionally high values were presumed to originate from endothermy. The simultaneous measurement of body temperature and metabolic rate revealed a strong correlation between these two parameters. The comparison of the standard metabolic rate of Polistes biglumis with that of Polistes dominula revealed a significantly lower metabolism of the alpine wasps. This energy saving metabolic strategy could be an adaptation to the harsh climate conditions, which restricts foraging flights and energy recruitment.

Species distribution models (SDMs) are tools used by ecologists to help predict the spread of invasive species. Information provided by these models can help direct conservation and biosecurity efforts by highlighting areas likely to contain species of interest. In this study, two models were created to investigate the potential range expansion of Polistes dominula Christ (Hymenoptera: Vespidae) in the southern hemisphere. This palearctic species has spread to invade North and South America, South Africa, Australia, and more recently New Zealand. Using the BIOCLIM and MAXENT modelling methods, regions that were suitable for P. dominula were identified based on climate data across four regions in the southern hemisphere. In South America areas of central Chile, eastern Argentina, parts of Uruguay, and southern Brazil were identified as climatically suitable for the establishment of P. dominula. Similarly, southern parts of South Africa and Australia were identified by the model to be suitable as well as much of the North Island and east of the South Island of New Zealand. Based on outputs from both models, significant range expansion by P. dominula is possible across its more southern invaded ranges.

Introduction: Translational science has gained prominence in medicine, but there is still much work to be done before scientific results are used optimally and incorporated into everyday health practice. As the main focus is still on generating new scientific data with financial resources primarily available for that purpose, other activities that are necessary in the transition from research to community benefit are considered less needy. The European Statistical Office of the European Commission has recently reported that 1.7 million people under 75 years of age died in Europe in 2016, with around 1.2 million of those deaths being avoidable through effective primary prevention and public health intervention. Therefore, Academia Europaea, one of the five Pan-European networks that form SAPEA (Science Advice for Policy by European Academies), a key element of the European Commission’s Scientific Advice Mechanism (SAM), has launched a project to develop a model to facilitate and accelerate the utilisation of scientific knowledge for public and community benefit. Methods: During the process, leaders in the field, including prominent basic and clinical researchers, editors-in-chief of high-impact journals publishing translational research articles, translational medicine (TM) centre leaders, media representatives, academics and university leaders, developed the TM cycle, a new model that we believe could significantly advance the development of TM. Results: This model focuses equally on the acquisition of new scientific results healthcare, understandable and digestible summation of results, and their communication to all participants. We have also renewed the definition in TM, identified challenges and recommended solutions. Conclusion: The authors, including senior officers of Academia Europaea, produced this document to serve as a basis for revising thinking on TM with the end result of enabling more efficient and cost-effective healthcare.

On behalf of the Editor-in-Chief, Prof [...]

Translation of the seminal 1877 paper by Ludwig Boltzmann which for the first time established the probabilistic basis of entropy. Includes a scientific commentary.

This paper presents a novel method for finding features in the analysis of variable distributions stemming from time series. We apply the methodology to the case of submitted and accepted papers in peer-reviewed journals. We provide a comparative study of editorial decisions for papers submitted to two peer-reviewed journals: the Journal of the Serbian Chemical Society (JSCS) and this MDPI Entropy journal. We cover three recent years for which the fate of submitted papers—about 600 papers to JSCS and 2500 to Entropy—is completely determined. Instead of comparing the number distributions of these papers as a function of time with respect to a uniform distribution, we analyze the relevant probabilities, from which we derive the information entropy. It is argued that such probabilities are indeed more relevant for authors than the actual number of submissions. We tie this entropy analysis to the so called diversity of the variable distributions. Furthermore, we emphasize the correspondence between the entropy and the diversity with inequality measures, like the Herfindahl-Hirschman index and the Theil index, itself being in the class of entropy measures; the Gini coefficient which also measures the diversity in ranking is calculated for further discussion. In this sample, the seasonal aspects of the peer review process are outlined. It is found that the use of such indices, non linear transformations of the data distributions, allow us to distinguish features and evolutions of the peer review process as a function of time as well as comparing the non-uniformity of distributions. Furthermore, t- and z-statistical tests are applied in order to measure the significance (p-level) of the findings, that is, whether papers are more likely to be accepted if they are submitted during a few specific months or during a particular “season”; the predictability strength depends on the journal.

The analysis of research paper collections is an interesting topic that can give insights on whether a research area is stalled in the same problems, or there is a great amount of novelty every year. Previous research has addressed similar tasks by the analysis of keywords or reference lists, with different degrees of human intervention. In this paper, we demonstrate how, with the use of Normalized Relative Compression, together with a set of automated data-processing tasks, we can successfully visually compare research articles and document collections. We also achieve very similar results with Normalized Conditional Compression that can be applied with a regular compressor. With our approach, we can group papers of different disciplines, analyze how a conference evolves throughout the different editions, or how the profile of a researcher changes through the time. We provide a set of tests that validate our technique, and show that it behaves better for these tasks than other techniques previously proposed.

As a follow-up to the Best Paper Award of 2014, recognizing the most outstanding papers in the area of remote sensing techniques, design and applications published in Remote Sensing, we are pleased to announce the Remote Sensing Best Paper Award for the year 2015. [...]

We are pleased to announce the “Entropy Best Paper Award” for 2015. Nominations were selected by the Editor-in-Chief and designated Editorial Board Members from all the papers published in 2011. Reviews and research papers were evaluated separately. We gladly announce that the following three papers have won the Entropy Best Paper Award in 2015:[...]

On behalf of the Editor-in-Chief, Prof. Dr. Kevin H. Knuth, we are pleased to announce the Entropy Best Paper Award for 2018 [...]

Started in 2009, our journal will celebrate its 10th anniversary in 2019 [...]

The international symposium on remote sensing 2018 (ISRS 2018) was held in Pyeongchang, Korea, 9−11 May 2018 [...]

In 2013, Entropy instituted the “Best Paper” award to recognize outstanding papers in the area of entropy and information studies published in Entropy [1]. We are pleased to announce the “Entropy Best Paper Award” for 2014. Nominations were selected by the Editor-in-Chief and designated Editorial Board Members from all the papers published in 2010.

Although recycling is considered the core of a circular economy for returning materials to the supply chain, its procedures are poorly understood. Waste recycling is considered a big source of energy saving and a promoter of CO2 recovery. Besides that, it generates jobs and changes markets worldwide. The Brasilian National Policy on Solid Waste (PNRS) recognizes Waste Pickers as the major social agent in the recycling process responsible for putting Brasil among the ten largest paper-recycling countries in the world. This paper presents an analysis of Brasilian recycling chains of paper and plastics and the main challenges for expanding recycling from Municipal solid waste. The research data were obtained from primary and secondary source related to the recycling supply chain of paper and of the following plastics—High Density Polyethylene (HDPE),Low Density Polyethylene (LDPE), Polypropylene(PP), Polyethylene Terephthalate(PET) and Polystyrene(PS). Enterprises of various sizes, including informal ones and WPs associations/cooperatives, were visited, in the five Brasilian geographic regions, during the years of 2013 and 2014. A nomenclature was defined for the various enterprises that operate in the Brasilian recycling chain. Each node of the plastic and paper recycling chain was described. The main bottleneck observed in these chains is the lack of continuous programs of selective collection with an emphasis on environmental education processes in the 5570 Brasilian municipalities. Several possibilities not only to promote waste recycling but also to increase the productivity of the sorting process are discussed.

Peer-reviewed journals are a pillar of modern science. Their aim is to achieve highest scientific standards by carrying out a rigorous peer review that is, as a minimum requirement, supposed to be able to identify fundamental methodological errors or false claims. Unfortunately, as many climate researchers and engaged observers of the climate change debate pointed out in various internet discussion fora, the paper by Spencer and Braswell [1] that was recently published in Remote Sensing is most likely problematic in both aspects and should therefore not have been published. After having become aware of the situation, and studying the various pro and contra arguments, I agree with the critics of the paper. Therefore, I would like to take the responsibility for this editorial decision and, as a result, step down as Editor-in-Chief of the journal Remote Sensing. [...]

The accompanying papers in the first issue of Entropy, volume 5, 2003 were presented at the electronic conference on Foundations of Information Science FIS 2002 (http://www.mdpi.net/fis2002/). The running title of this FIS e-conference was THE NATURE OF INFORMATION: CONCEPTIONS, MISCONCEPTIONS, AND PARADOXES. It was held on the Internet from 6 to 10 May 2002, and was followed by a series of discussions –structured as focused sessions– which took place in the net from 10 May 2002 until 31 January 2003 (more than 400 messages were exchanged, see: http://fis.iguw.tuwien.ac.at/mailings/). This Introduction will briefly survey the problems around the concept of information, will present the central ideas of the FIS initiative, and will contrast some of the basic differences between information and mechanics (reductionism).

Remote Sensing has started to institute a “Best Paper” award to recognize the most outstanding papers in the area of remote sensing techniques, design and applications published in Remote Sensing. We are pleased to announce the first “Remote Sensing Best Paper Award” for the year 2014.

It has recently been brought to our attention by members of the scientific community that a paper published in Climate (ISSN 2225-1154, http://www.mdpi.com/journal/climate) has raised some controversy regarding its originality, overall quality, and the scientific validity of the data presented. Moreover, two members have resigned from the Editorial Board, stating they are not willing to be associated with a journal where such articles are published. The paper they referred to was “Akasofu, S.-I. On the Present Halting of Global Warming. Climate 2013, 1, 4–11”, published in the first issue of Climate in May 2013 [1], available online at: http://www.mdpi.com/2225-1154/1/1/4.