Search

The aim of the research is to determine ways to improve the efficiency of grain materials pneumatic separation based on the study of the interaction mechanism of grains with the air flow in the channel elements, which are inclined sections of the air duct. The paper considers a modified separation method that separates the grain material according to the aerodynamic properties of the components in a vertical zigzag air channel in an aerodynamic and gravitational field. The studies were carried out by means of mathematical modeling followed by experimental confirmation of the modeling results. A computer mathematical model was created in the MathCad 13 application package to determine the parameters of the zigzag aspiration channel. This model describes the influx of parameters in the channel (width, height, cut of the zigzag ledge to the horizon, edge of the zigzag ledge) on the nature of the grain trajectory. As a result of the numerical simulation process using the mathematical package Mathematica, dependence was obtained to determine the trajectory of motion depending on the angular velocity. An increase in the pneumatic separation effect during the grain mixtures division due to the influence of the Magnus effect was established as a result of experimental studies. The design of a zigzag separator with an annular channel section has been improved based of the research carried out. [ABSTRACT FROM AUTHOR]

The possibilities of the action of uneven air flows on the grain material in the separating channels are still not used enough. The reason for this is the insufficient knowledge of the processes of interaction of the components of the grain material with an uneven air flow. The purpose of the research is to increase the efficiency of grain material separation according to aerodynamic properties by purposefully changing the diagram of air velocities in the channel sections using the actions of lateral and aerodynamic forces. The separation efficiency of grain material components was determined by trajectory analysis. The different geometry of the pneumatic separation channel was studied. The study of the distribution of air velocity and air pressure vectors in a vertical annular channel was carried out using the FlowVision software. It has been established that a change in the air velocity diagram can be implemented both by changing the geometric parameters of the channel and by additional distributed air supply through the perforation in the side walls of the pneumatic channel. Based on the analysis of the velocity field, an improved scheme of a pneumatic gravitational separator is proposed for separating grain material into three fractions according to aerodynamic characteristics. [ABSTRACT FROM AUTHOR]