Search

Life Cycle Assessment (LCA) and Life Cycle Cost Assessment (LCCA) are essential tools for environmental and economic assessment and decision-making in an evolving world with continuous climate change. In the same conditions, one of the most used and assessed solutions for facing climate change is using pervious pavements, with many papers proving its benefits. However, the literature has shown a need for more research on the LCA methodological aspects in the context of new green infrastructure. This research aims to review pervious pavements, LCA and LCCA combined, while discussing possible differences in boundaries, functional units, and other parameters. Thus, a string search was performed, leading to 89 documents. The main results indicate LCA is usually scope-bounded in the field of pervious pavements, with different benefits and characteristics, such as traffic impact, urban heat island effects, and carbonation. As for LCCA, private and public cost differentiation provide a scope definition and monetisation difficulties. In conclusion, both tools offer promising applications in pervious pavements. As a significant deliverable and recommendation of this paper, both LCA and LCCA theoretical frameworks were provided based on the benefits and specific characteristics included in the literature. These frameworks introduce novel ideas and perspectives, inviting further exploration and discussion. [ABSTRACT FROM AUTHOR]

Five litres of lubricating oil and two 8.5 litre batches of diesel were deposited on each of two hydraulically isolated experimental enhanced pervious pavement parking bays. The 50 mm aggregate subbases of the two bays were of either recycled concrete or crushed limestone. The bays were constructed in such a way that a near-surface gravity separator was created by the arranging of the outlet pipes such that a permanent pool of water was maintained in the system and water could only enter from below the level of any floating oil. Dissolved/dispersed hydrocarbons were measured at acceptable concentrations when monitoring was carried out over a period of approximately 5 months. The maximum concentration was 7.2 mg/l and of all the samples collected only 3% exceeded the 5 mg/l limit applied in the UK for a class 1 interceptor, and the majority of samples had hydrocarbon concentrations of less than 2 mg/l. Much more significant is the fact that no free product was discharged from either system up to the time the experiment was dismantled 2 years from the first oil application despite the fact that sufficient hydrocarbon had been added to each pavement to produce a film on a water surface of over 500 hectares. [ABSTRACT FROM AUTHOR]

A methodology to enhance the containment of polycyclic aromatic hydrocarbons (PAHs) in pervious pavement systems was developed through the chemical modification of a typical Rhode Island glacial outwash soil. In addition, the PAH-retaining capacity of different structural components of pervious pavements was evaluated using column experiments in terms of PAH retention. Two methods were used for soil amendments. The first method was a direct modification of the porous matrix using quaternary ammonium cations through an ion exchange process. The second method involved blending the soil with a commercial organoclay (PM-199; CETCO Oil Field Services). These amendments successfully increased the soil's fraction of organic carbon ( foc) by at least 70%. To quantify the efficiency of these amended soils to sorb PAHs, a series of batch isotherms and column experiments were conducted on unmodified and modified soils. These studies demonstrated that, through the synthetic modification, the sorption of PAH was increased by up to 20-fold. The Langmuir (α, β) and Freundlich ( KF, n) isotherm coefficients calculated from batch studies were higher when compared with column experiments. Overall, the organoclay-glacial outwash blend exhibited the greatest KF value of 114.2. Breakthrough curves obtained using HYDRUS 1D were compared with measured data. The column experiments conducted on porous concrete and aggregate demonstrated that these materials have a minimal contribution to the overall containment of PAH in pervious pavement systems. © 2013 American Institute of Chemical Engineers Environ Prog, 33: 47-54, 2014 [ABSTRACT FROM AUTHOR]

Pervious pavements are an effective stormwater treatment technology. However, their performance under variable drying and wetting conditions have yet to be tested, particularly under a continuous time scale. This paper reports on the clogging behaviour and pollutant removal efficiency of three pervious pavement types over 26 accelerated years. These pavements were monolithic porous asphalt (PA), Permapave (PP) and modular Hydrapave (HP). Over a cycle of 13 days, the period of which was equivalent to the average annual Brisbane, Australia rainfall (1,200 mm), the pavements were randomly dosed with four different flows. Drying events of 3 h duration were simulated during each flow. Inflow and outflow samples were collected and analysed for Total Suspended Solids (TSS), Total Phosphorus (TP) and Total Nitrogen (TN). To evaluate the rate of clogging, a 1 in 5 year Brisbane storm event was simulated in the 6th, 8th, 12th, 16th, 20th and 24th week. Under normal dosing conditions, none of the pavements showed signs of clogging even after 15 years. However, under storm conditions, both PA and HP started to clog after 12 years, while PP showed no signs of clogging after 26 years. The drying and various flow events showed no effects in TSS removal, with all systems achieving a removal of approximately 100%. The average TP removal was 20% for all flows except for low flow, which had a significant amount of leaching over time. Leaching from TN was also observed during all flows except high flow. The TSS, TP and TN results observed during storm events were similar to that of high flow. [ABSTRACT FROM AUTHOR]

Geotextiles incorporating inorganic nutrients (particularly phosphorous) to enhance the growth of oil degrading microoganisms when geotextiles are used in pervious pavement applications have been shown to be effective in the past. However the cost and manufacturing difficulties have been a barrier to their use. A polypropylene random mat geotextile incorporating an alternative polymer additive as a source of phosphorus has been investigated as a potential self-fertilising geotextile. Experiments are reported which investigate nutrient leach rates, biofilm formation and biodegradation activity. [ABSTRACT FROM AUTHOR]

Pervious pavements are drainage techniques that improve urban water management in a sustainable manner. An experimental pervious pavement parking area has been constructed in the north of Spain (Santander), with the aim of harvesting good quality rainwater. Forty-five pervious pavement structures have been designed and constructed to measure stored water quantity and quality simultaneously. Ten of these structures are specifically constructed with different geotextile layers for improving water storage within the pavements. Following the confirmation in previous laboratory experiments that the geotextile influenced on water storage, two different geosynthetics (Inbitex and a One Way evaporation control membrane) and control pervious pavements with no geotextile layers were tested in the field. Weather conditions were monitored in order to find correlations with the water storage within the pervious pavement models tested. During one year of monitoring the three different pervious pavement types tested remained at their maximum storage capacity. The heavy rain events which occurred during the experimental period caused evaporation rates within the pervious pavements to be not significant, but allowed the researchers to observe certain trends in the water storage. Temperature was the most closely correlated weather factor with the level of the water stored within the pervious pavements tested. [ABSTRACT FROM AUTHOR]

Pervious pavements in car parks and driveways reduce the peak runoff rate and the quantity of runoff discharged into urban drains as well as improve the stormwater quality by trapping the sediments in the infiltrated water. The paper focuses on presenting results from the laboratory tests carried out to evaluate water quality improvements and effects of long-term decrease in infiltration rates with time due to sediments trapping (clogging) within the pavement pores. Clogging was not found to be a major factor affecting pervious pavement performance after simulating 17 years of stormwater quality samples. [ABSTRACT FROM AUTHOR]

The city of Melbourne, Australia is experiencing a water crisis with potable water storage reservoirs at an all time low. With increasing urbanisation there is an ever increasing need to research and explore sustainable water management initiatives. There is potential to minimise the negative impacts of stormwater runoff and augment dwindling supplies of potable water through adoption of pervious paving technology. The traditional approach to stormwater management has focused on constructing drainage networks to carry stormwater away from developed areas as quickly as possible to avoid the risk of flooding. The main aim of this research project was to establish relationships between rainfall intensity, infiltration rate and pervious pavement runoff and to examine the improvement to stormwater quality after infiltrating through pervious pavements. This paper describes the laboratory experiment set-up to determine the infiltration patterns and stormwater quality improvement for simulated storms precipitating on pervious pavements. Next, the scaling-up of the experimental rig to a field-based trial is explained. Preliminary results from this work are presented to demonstrate the potential benefits of pervious pavements in the Australian landscape. [ABSTRACT FROM AUTHOR]