Search

Using nanostructured materials issued from renewable resources could be the key to the development of good-quality low-cost products that help reduce pollution. Cellulose nanofibrils (CNFs) were obtained by alkaline and bleaching treatments of Amazonian Paricá hardwood sawdust, a waste material from the Brazilian forestry industry. This study evaluated a process consisting in alternating layers of Paricá CNFs and cassava starch to coat standard writing and printing (W&P) papers with a skim-coating method, in which one face of each paper sample is passed over the surface of a suspension containing either CNFs or cassava starch, alternatively. The coated samples were then compared to the uncoated paper in terms of mechanical and surface properties. The mechanical properties of the papers coated with alkaline CNFs showed a declining trend as the number of coating layers increased (from 47 to 31 MPa). The papers coated with starch layers showed improved mechanical performance compared to the samples only coated with alkaline and alkaline bleached CNFs. All the coated samples showed excellent resistance to water degradation. The worst degradation (4%) was observed for the samples coated with a single layer of alkaline CNFs. A significant improvement in surface wettability was observed when gelatinized cassava starch was applied to the paper samples, irrespective of the type of CNFs eventually present on the surface. All in all, these results suggest that using gelatinized cassava starch as an alternating layer between successive CNFs layers on the surface of W&P paper samples may be promising for improving their overall properties. [ABSTRACT FROM AUTHOR]

Thermal modification is a technique that can be used to increase the resistance of wood to the biodeterioration processes. In this context, the objective of this study was to evaluate the durability of Parkia pendula (angelim-saia) and Simarouba amara (marupá) woods thermally modified in rotting field tests and by the action of natural weathering. The tests were carried out in the Brazilian Amazon region, in the Mato Grosso State. The thermal modification of the wood was set with four treatments: control (T1); electric-oven treatment, 180°C for 3 h (T2); combination of autoclave and electric-oven, 125°C for 3 h, and 180°C for 3 h respectively (T3), and immersion in vegetable oil, 180°C for 3 h (T4). The samples were partially buried for the field rotting assays, and the mass loss and deterioration index were seasonally evaluated after the experiment was installed. These analyses were performed on the same samples which has been exposed to rotting essays. The action of natural weathering was assessed through the CIELAB* colour system. T4 was the most efficient for increasing the resistance to biological deterioration, under the tested conditions. T2 and T3 treatments conferred higher colorimetric stability for both types of woods after natural weathering, under the tested conditions. [ABSTRACT FROM AUTHOR]

Copyright of Nativa is the property of Revista Nativa and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Alternative treatments to control ticks are being increasingly investigated, including natural products to decrease parasitic resistance and environmental impact. The present study investigated the chemical profile of eucalyptus wood vinegar and evaluated its effect on the reproduction of Rhipicephalus sanguineus. Eucalyptus wood vinegar (WV) was tested at several concentrations. For the experiment, 500 engorged females were collected from canine hosts. The female ticks were distributed by weight in groups of ten per WV concentration, with five replicates per treatment. For all tests, the ticks were immersed for 5 min in a solution with each WV concentration. The positive control was amitraz and negative was water. The major components of the WV's organic fraction were furfural and phenolic compounds. A significant decrease in egg hatching was observed in the WV concentration range from 65 to 1,000 mg mL−1. When parameters such as the percentage of hatching, female weight, and egg mass were evaluated, the efficiency of the product was verified as being between 84.97% and 99.38% in the concentration range of 65 to 1,000 mg mL–1, respectively. There is a real potential for using eucalyptus WV to control dog ticks since it negatively affects the reproductive cycle of the parasites. [ABSTRACT FROM AUTHOR]

The production of forestry and agricultural seedlings is commonly carried out in polypropylene tubes, raw material from the petrochemical industry. Besides being derived from non-renewable resources, they are not biodegradable and have a long life cycle which may cause a significant environmental impact when disposed of in nature. Forest and agro-industrial wastes, which also apply to this use, are renewable, easily obtainable, and biodegradable materials. This work aimed to evaluate the feasibility of using cashew nut shell wastes associated with beeswax for the manufacture of biodegradable tubes. After roasting cashew nuts, the tubes were manufactured with different proportions of beeswax and nut shells. The average values observed for the bulk density of the biodegradable tubes varied between 0.83 and 1.00 g cm−3 for the different treatments evaluated. Tubes with 50% cashew nut achieved 8% and 4.5% for water absorption and swelling after 48 h, respectively. The modulus of elasticity reached a maximum of 19 MPa for 10% addition of cashew nut shell, while 50% of the waste reached a maximum of 15 MPa, which favors the rupture of the material by the developing roots. Concerning seedling indicators and compared to conventional polypropylene tubes, the alternative tubes presented a similar quality and lower deformation when exposed to mechanical stimulation. Studies of this type may serve as an incentive for improved field cultivation conditions, especially when combined with the principles of materials to be used in the not-so-distant future. [ABSTRACT FROM AUTHOR]

Eucalyptus wood vinegar (WV) is a versatile natural product employed in several areas such as for agriculture, zootechnics, and veterinary applications. However, the product may contain contaminants such as polycyclic aromatic hydrocarbons, methanol, metals, and so on in its raw form. Thus, refining is required to remove them. Only after reaching a high-purity grade can WV be applied as a basis for pharmaceuticals, antimicrobials, and additives for animal husbandry. This work aimed to assess the effect of refining on the contaminant content of a WV produced on an industrial scale and traded as agricultural input in the Brazilian market. WV was refined by sequential vacuum distillations and had its contaminant contents assessed before and after refining. The following chemical classes were investigated: metals and other elements, insecticides, fungicides, and herbicides (carbamates, organochlorines, organophosphates, pyrethroids, and others), mycotoxins, polychlorinated dioxins and furans, polycyclic aromatic hydrocarbons, and volatile organic compounds, encompassing more than 100 chemical species. Also, the WV physical–chemical properties before and after refining were determined. Gas chromatography and mass spectrometry (GC/MS) were employed to attain the WV's chemical profile. The main chemical components, such as phenolic compounds, furans, ketones, pyrans, etc., were annotated in the WV chemical profile. No traces of insecticides, fungicides, herbicides, heavy metals, mycotoxins, polychlorinated dioxins, or polychlorinated furans were found in raw WV or refined versions. However, several other undes/irable chemicals were determined in the raw product, such as PAHs and volatile organic compounds (acetaldehyde, acetone, ethylene glycol, and methanol). Nevertheless, all of them were effectively removed from the raw WV after the first or second sequential refining steps, resulting in a pure product. Therefore, only one refining step can be applied to raw WV to yield a high-quality product for pharmaceutical and animal husbandry applications. [ABSTRACT FROM AUTHOR]

Charcoal is one of the most essential energy sources in the world and is used mainly for domestic and industrial purposes. Brazilian charcoal production occurs in rudimentary masonry kilns without concern for process safety or energy waste. This work aimed to develop a mini carbonization system of three kilns coupled to a vertical smoke burner for optimized and environmentally correct charcoal and wood vinegar (WV) production on small farms. The project was divided into three parts for dimensioning: the three-kiln set, the WV condensing device, and the smoke burner. The condenser was designed following the procedures from the standards of TEMA (Tubular Exchangers Manufacturers Association); ASME (Society of Mechanical Engineers of the United States) Section VIII, Division 1; and the NR-13 (Regulatory Standard) of ABNT (Brazilian Association of Technical Standards). In contrast to the current scenario, in which primitive carbonization technologies are still employed, bringing about low charcoal yields and significant pollution release, the use of a mini-kiln that allows charcoal production and wood vinegar recovery combined with pollutant smoke burning is an interesting eco-friendly solution. Thus, the mini-kiln model presented here brings a low cost and environmental safety to the charcoal production chain, reaching sustainability parameters and offering higher income opportunities to small producers. [ABSTRACT FROM AUTHOR]

The main mode of transport in Brazil is the road; however, the railroad has a freight rate 39% lower, which demonstrates its economic potential. Railroad ties are essential in railroads, and for many years, native wood was used as raw material. For environmental and economic reasons, it is important to identify reforested wood species with fast growth that may be used as ties. Thus, the present study aimed to evaluate the quality of Eucalyptus dunnii, Eucalyptus grandis, Eucalyptus saligna, and Corymbia maculata woods for use as railway sleepers according to the NBR 7511 standard (ABNT, 2013) and compare them with the material inspection procedure PIM 14 (2016) of the National Department of Transportation Infrastructure (DNIT). It was observed that the wood of the species C. maculata presented the closest conditions for use as ties, probably due to its high density, which is directly reflected in the specific mass and mechanical properties of hardness and shear. However, this species showed less dimensional stability, due precisely to its high density and thus larger cell wall diameters. Successive to the good performance of C. maculata, the E. saligna was the second species that was best fit for use as ties, but it was not classified for two properties: traction and the sum of the properties: (B) hardness in MPa, (C) shear resistance in MPa, (D) normal strength resistance in MPa, (E) fracture toughness in MPa, respectively B + C + D + E. Nevertheless, it is the one that best presents dimensional stability. The other woods did not meet the minimum levels for use as ties. [ABSTRACT FROM AUTHOR]

Microbial resistance to drugs is a public health problem; therefore, there is a search for alternatives to replace conventional products with natural agents. One of the potential antimicrobial agents is wood vinegar derived from the carbonization of lignocellulosic raw materials. The objectives of the present work were to evaluate the antibacterial and antifungal action of two kinds of wood vinegar (WV), one of Eucalyptus urograndis wood and another of Bambusa vulgaris biomass, and determine their chemical profile. The antimicrobial effect was assessed against Staphylococcus aureus, Pseudomonas aeruginosa, Salmonella enteritidis, Escherichia coli, Streptococcus agalactiae, and Candida albicans. The minimum inhibitory concentration and the minimum bactericidal and fungicidal concentrations were determined. Micrographs of the microorganisms before and after exposure to both kinds of wood vinegar were obtained by scanning electron microscopy. The chemical profile of the eucalyptus and bamboo vinegar was carried out by gas chromatography and mass spectrometry (GC/MS). Both types of WV presented significant antimicrobial activity, with the bamboo one having a higher efficiency. Both studied pyroligneous extracts seem promising for developing natural antimicrobials due to their efficiency against pathogens. GC/MS analyses demonstrated that the chemical profiles of both kinds of WV were similar but with some significant differences. The major component of the eucalyptus vinegar was furfural (17.2%), while the bamboo WV was phenol (15.3%). Several compounds in both WVs have proven antimicrobial activity, such as acetic acid, furfural, phenol, cresols, guaiacol, and xylenols. Together, they are the major in the chemical composition of the organic fraction of both WVs. Bamboo vinegar had a more expressive content of organic acids. Micrographs of microorganisms taken after exposure to both kinds of wood vinegar displayed several cell modifications. The potential of both types of wood vinegar as a basis for natural antimicrobial products seems feasible due to their proven effect on inhibiting the microorganisms' growth assessed in this experiment. [ABSTRACT FROM AUTHOR]

Copyright of Nativa is the property of Revista Nativa and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Reusing agro-industrial waste does not only help to mitigate environmental impact but also enables valorization through the development of new products. The aim is to enhance the physical and mechanical properties of particleboard panels produced with Eucalyptus wood and different proportions of waste products—coconut fiber (Cocos nucifera L.). Physical properties (density, water absorption, and thickness swelling) and mechanical properties (static bending and internal bond resistance) were assessed, and panels reinforced with coconut fiber showed the best qualities with higher density, greater dimensional stability, and less water absorption. Static bending resistance and internal bond resistance also increased significantly. This demonstrated the potential of achieving compatible characteristics for civil construction and furniture production through the inclusion of waste material. The impact of this research is obtained from the utilization of an important agro-industrial residue in the manufacture of permanent composites. [ABSTRACT FROM AUTHOR]

Pre-treatments reduce energy consumption for the production of cellulose micro/nanofibrils (MFC/CNF). The objective of this work was to study sodium silicate (Na2SiO3) solutions as pre-treatment for Eucalyptus sp. and Pinus sp. pulps. The treatments were identified as EUC SS 5 % and EUC SS 10 % when 5 and 10 % Na2SiO3 were used, respectively. The treatments for Pinus sp. pulp were identified as PIN SS 5 % and PIN SS 10 %, and the untreated pulps as EUC control and PIN control. The lowest hemicellulose content was obtained for PIN SS 10 %. EUC SS 10 % showed the highest WRV values. EUC SS 5 % (∼ 4100 kWh/t) and EUC SS 10 % (∼ 4200 kWh/t) showed the lowest energy consumption. The pre-treated MFC/CNF showed diameters below 45 nm. The lowest viscosity was obtained for EUC SS 5 % (5.5 cP) and the highest for PIN control (7.7 cP), respectively. The zeta potential indicated moderate stability of the suspensions (−24 ∼ −18 mV). Na2SiO3 showed efficiency for MFC/CNF production due to reduced energy consumption and better individualization. The suspensions have compatible characteristics for application as a stabilizer of colloidal systems and reinforcement of composites. [ABSTRACT FROM AUTHOR]

The present work evaluates the production of wood–cement particleboards (WCBs) with addition of coconut-husk fibers. Trees of a Eucalyptus urophylla × Eucalyptus grandis hybrid were used as wood source. Boards were produced with addition of five coconut-fiber levels (0%, 10%, 20%, 30%, 40% and 50%) to replace the original wood, in a completely randomized design. From each board, specimens were taken to perform physical–mechanical tests (density, water absorption, thickness swelling, static bending, compression strength, and internal bond strength). The chemical characterization of the coconut fiber – in particular the total amount of extractives – in cold and hot water and an organic solvent, along with determination of lignin, holocellulose and ash amounts. The results showed that the addition of coconut fibers significantly affected the physical–mechanical properties of the boards. For the physical properties, the addition of coconut fibers improved the dimensional stability with the respective decrease in water absorption and thickness swelling. For mechanical properties, a decrease in the MOR and MOE was observed as the percentage of coconut fibers increased, most likely due to a poor interaction between the particles and the cementitious matrix. The resulting WCBs were suitable for nonstructural and indoor uses. [ABSTRACT FROM AUTHOR]

Castor seed cake is an interesting material from which to make activated charcoal (AC). The present research aimed to produce and characterize AC from castor seed cake by activation with phosphoric acid. Experimental conditions included two concentrations of activating agent (20 and 40%), two temperatures (400 and 800 °C) and two times (60 and 180 min), in a factorial experiment with two replicates for each treatment, totalizing 16 observations. One control treatment produced AC at 600 °C and 120 min. Scanning electron microscopy, BET surface area analysis, and adsorption tests with methylene blue were performed, and point-of-zero charge and mesoporosity were determined. Langmuir and Freundlich models were adjusted to explain adsorption. Results showed type IV isotherms. Best activation results were achieved at 800 °C, 60 min, and 40% phosphoric acid. The Langmuir model had the best fit, and experimental results demonstrate the technical viability of producing AC with good adsorption properties. Despite of having a maximum surface area not so high as the commercial ACs, the maximum adsorption capacity for methylene blue of the AC produced from castor cake exceeded the values reported in the literature for those products. [ABSTRACT FROM AUTHOR]

Copyright of Nativa is the property of Revista Nativa and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

In response to the challenge of harmonizing agricultural production with sustainable environmental management, setting up of agroforestry systems (AFSs) is an appealing alternative that combines crops and wood production with ecosystem services. In this context, Schizolobium parahyba var. amazonicum Huber × Ducke (paricá) has shown good silvicultural performance in AFSs. Nevertheless, the properties of its wood when grown in AFSs are not widely reported in the literature. The present study aimed to characterize paricá wood regarding its technological characteristics and industrial applications. Wood was obtained from a multi-stratified AFS in midwestern Rondônia state, northern Brazil. The AFS is composed of perennial crops and forest species cultivated in double rows with spacing of 5.0 m × 2.5 m. Experimental results showed paricá wood had low extractives content and density along with good dimensional stability. However, the wood's mechanical performance was similar to that observed in material from pure plantations and pristine forests. Specific strength was similar to wood species with higher basic densities. Paricá wood reached the minimum requirements for structural uses and had suitable characteristics to be employed to produce engineered wood panels. [ABSTRACT FROM AUTHOR]

Mimosa tenuiflora (Willd.) Poir. (MT) is an underutilized plant specie since its wood is mostly used for energy production. Nonetheless, the bark from this forest plant has a high amount of tannins and other valuable compounds. Tannins have high worldwide importance and, because of that, there is an increasing number of researches on biorefinery systems aiming at maximizing their exploitation. The present study evaluated tannins extracted from the MT bark and their use for producing wood adhesives. Three types of powdered tannins were extracted using different solvents: a pure aqueous solution, a 5% sodium hydroxide (NaOH) aqueous solution, and a 5% sodium bisulfite (NaHSO3) aqueous solution. Distilled water, wheat flour, and formaldehyde were also used as a solvent, a glue extender, and a catalyst, respectively. These adhesives were applied for bonding pine wood joints and their shear strengths were determined. All the MT-based adhesives showed high viscosities and, yielded glue lines with similar shear strengths and similar shear deformations if compared to each other. That tannin-based glue incorporated with the tannin extracted using NaOH or NaHSO3 stood out and yielded similar bonding performances if compared to a commercial adhesive applied as a positive control. [ABSTRACT FROM AUTHOR]

Aquaculture is an activity with economic and social importance since it generates food, employment, and income. However, like other human activities, it negatively impacts the environment, in this respect mainly due to the production of effluents rich in sedimentable solids, organic matter, phosphorus, and nitrogen. These last two are responsible for the eutrophication of water courses, causing changes in the aquatic biota. Hence, there is a need to adopt strategies to improve the efficiency of wastewater reuse. In this sense, the objective of this work was to evaluate the efficiency of using the floating aquatic macrophytes Eichhornia crassipes, Pistia stratiotes, and Salvinia molesta for the treatment of aquaculture effluents. The experiment was conducted in a completely randomized design, with seven treatments and three repetitions; the treatments were the following: T1, without plant, treated only with sedimentation; T2, Eichhornia crassipes; T3, Pistia stratiotes; T4, Salvinia molesta; T5, Eichhornia crassipes and Pistia stratiotes; T6, Eichhornia crassipes and Salvinia molesta; and T7, Pistia stratiotes and Salvinia molesta. The treatments were evaluated for a period of 168 h: the first collection of effluent allowed analysis of the raw effluent; the second occurred 24 h after the first collection and the others, on alternate days with 72, 120, and 168 h, totaling five collections in each experimental unit. The effluent used came from breeding tanks of Nile Tilapia (Oreochromis niloticus). The quality of the effluent was evaluated by the rate of removal of nutrients N-total, N-nitrite, N-nitrate, N-ammoniacal and Ptotal, temperature, pH, turbidity, dissolved oxygen, electrical conductivity, total alkalinity, BDO, and CDO. After the effluent was treated, the values of the parameters were compared with the maximum admissible values (MAVs), as specified by Brazil's National Environmental Council (CONAMA) in Resolutions 430/2011 and 357/2005. With the use of floating aquatic macrophytes, the concentrations of all evaluated limnology parameters improved significantly. There was also an improvement in the physical aspect of the effluent (transparency and turbidity). Thus, it can be concluded that the use of the macrophytes Eichhornia crassipes, Pistia stratiotes, and Salvinia molesta is effective in the treatment of effluents from fish farming. [ABSTRACT FROM AUTHOR]

Copyright of Anuario do Instituto de Geociencias is the property of Universidade Federal do Rio de Janeiro, Instituto de Geociencias and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Adhesive-free wood-plastic composite panels made with lignocellulosic wastes, and recycled plastics can be a sustainable option for generating useful "green" products. The present work assessed the physical-mechanical properties of adhesive-free panels produced with Qualea sp. sawdust and recycled polypropylene (PP). Discarded PP packaging was used. The packages were washed and ground with a laboratory knife mill until particle size of 10 to 14 mesh. Qualea sp. sawdust was sieved to select particle size of 14 to 30 mesh. Four experimental treatments were assessed by varying the percentages of PP and sawdust, as follows, 60 and 40%, 70 and 30%, 80 and 20%, and 90 and 10%, in an entirely randomized design with 3 panels per treatment, totaling 12 panels. The mats were hot-pressed at 180 °C during 20 min, the first 10 min under pressure of 1.0 MPa and the remaining 10 min at 42 MPa. Physical-mechanical properties of the panels were obtained as follows: density, moisture content, water absorption, thickness swelling, moduli of elasticity and rupture, and Rockwell hardness. In general, an increase of the percentage of PP provided higher dimensional stability to the panels, but there was no significant influence on mechanical strength. [ABSTRACT FROM AUTHOR]

Copyright of Nativa is the property of Revista Nativa and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Nativa is the property of Revista Nativa and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The purpose of this research was to evaluate the potential of Artificial Neural Networks in estimating the properties of wood resistance. In order to do so, a hybrid of eucalyptus (Eucalyptus urograndis) planted in the Northern Region of the State of Mato Grosso was selected and ten trees were collected. Then, four samples of each tree were removed, totaling 40 samples, which were later subjected to non-destructive testing of apparent density, ultrasonic wave propagation velocity, dynamic modulus of elasticity obtained by ultrasound, and Janka hardness. These properties were used as estimators of resistance and compressive strength parallel to fibers, and hardness. Multilayer Perceptron networks were also employed, training 100 of them for each of the evaluated parameters. The obtained results indicated that the use of Artificial Neural Networks is an efficient tool for predicting wood resistance. [ABSTRACT FROM AUTHOR]

Copyright of Nativa is the property of Revista Nativa and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Nativa is the property of Revista Nativa and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Nativa is the property of Revista Nativa and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Nativa is the property of Revista Nativa and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Brazilian Journal of Forest Research / Pesquisa Florestal Brasileira is the property of Brazilian Journal of Forest Research / Pesquisa Florestal Brasileira and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Brazilian Journal of Forest Research / Pesquisa Florestal Brasileira is the property of Brazilian Journal of Forest Research / Pesquisa Florestal Brasileira and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Revista Caatinga is the property of Revista Caatinga and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The resistance of particleboards, made from wood, bamboo and rice husk, to fungi and termites was evaluated. Panels were composed of 100% wood (Eucalyptus grandis), 100% bamboo (Bambusa vulgaris), 100% rice husk (Oryza sativa), 50% wood and 50% bamboo; and 50% wood and 50% rice husk. Panels exposed to the decay the brown-rot fungus (Gloeophyllum trabeum, and the white-rot fungus (Trametes versicolor), and, in a choice feeding trial, to termites (Nasutitermes corniger). The rice husk particleboards had the highest resistance of all samples and the bamboo particleboards had the lowest resistance. T. versicolor fungi produced a larger mass loss in the particleboards than did G. trabeum. [ABSTRACT FROM AUTHOR]

Copyright of Silva Lusitana is the property of Unidade de Investigacao de Silvicultura e Productos Florestais and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)