Search

Type I interferons (IFN-I) play pivotal roles in tumor therapy for three decades, underscoring the critical importance of maintaining the integrity of the IFN-1 signaling pathway in radiotherapy, chemotherapy, targeted therapy, and immunotherapy. However, the specific mechanism by which IFN-I contributes to these therapies, particularly in terms of activating dendritic cells (DCs), remains unclear. Based on recent studies, aberrant DNA in the cytoplasm activates the cyclic GMP-AMP synthase (cGAS)- stimulator of interferon genes (STING) signaling pathway, which in turn produces IFN-I, which is essential for antiviral and anticancer immunity. Notably, STING can also enhance anticancer immunity by promoting autophagy, inflammation, and glycolysis in an IFN-I-independent manner. These research advancements contribute to our comprehension of the distinctions between IFN-I drugs and STING agonists in the context of oncology therapy and shed light on the challenges involved in developing STING agonist drugs. Thus, we aimed to summarize the novel mechanisms underlying cGAS-STING-IFN-I signal activation in DC-mediated antigen presentation and its role in the cancer immune cycle in this review. [ABSTRACT FROM AUTHOR]

Salidroside has been widely used in anti-tumor, cardiovascular, and cerebrovascular protection. However, there are few reports of its use for wound repair. Herein, salidroside inflammation-targeted emulsion gel and non-targeted emulsion gel were developed for wound repair. The inflammation-targeted emulsion gels showed an overall trend of better transdermal penetration and lower potential than non-targeted emulsion gels (−58.7 mV and −1.6 mV, respectively). The apparent improvement of the trauma surface was significant in each administration group. There was a significant difference in the rate of wound healing of the rats between each administration group and the model group at days 7 and 14. Pathological tissue sections showed that inflammatory cells in the epidermis, dermis, and basal layer were significantly reduced, and the granulation tissue was proliferated in the inflammation-targeted emulsion gel group and the non-targeted emulsion gel group. Regarding the expressions of EGF and bFGF, the expressions of bFGF and EGF in the tissues of the inflammation-targeted group at days 7, 14, or 21 were significantly higher than that of the non-targeted emulsion gel group and the model group, both of which were statistically significant compared with the model group (p < 0.05). These results demonstrated that salidroside has the potential as an alternative drug for wound repair. [ABSTRACT FROM AUTHOR]

The purpose of this work was to analyze and evaluate the functional properties of a new nanoemulsion that contained cordycepin. Droplet size and distribution were measured, and the stability of the nanoemulsion in different storage conditions was evaluated. We also tested skin irritation caused by the nanoemulsion, cordycepin stability in the nanoemulsion, anti-aging effect, and microbial challenge. The nanoemulsion was homogeneous with proper dispersion stability, and cordycepin was stable for eight months within the cosmetic nanoemulsion. The nanoemulsion did not irritate human hand and face skin, and the cosmetic nanoemulsion was effective in preventing microbial contamination of the product during use and storage. The new nanoemulsion containing cordycepin satisfied provisions of the 2015 Safety and Technical Standards for Cosmetics of the Ministry of Health, People's Republic of China. [ABSTRACT FROM AUTHOR]

Cobalt coordinated covalent organic frameworks have attracted increasing interest in the field of CO2 photoreduction to CO, owing to their high electron affinity and predesigned structures. However, achieving high conversion efficiency is challenging since most Co related coordination environments facilitate fast recombination of photogenerated electron-hole pairs. Here, we design two kinds of Co-COF catalysts with oxygen coordinated Co atoms and find that after tuning of coordination environment, the reported Co framework catalyst with Co-O4 sites exhibits a high CO production rate of 18000 µmol g−1 h−1 with selectivity as high as 95.7% under visible light irradiation. From in/ex-situ spectral characterizations and theoretical calculations, it is revealed that the predesigned Co-O4 sites significantly facilitate the carrier migration in framework matrixes and inhibit the recombination of photogenerated electron-hole pairs in the photocatalytic process. This work opens a way for the design of high-performance catalysts for CO2 photoreduction. A class of inexpensive aminoanthraquinone organic dyes are shown to facilitate visible-light-driven CO2 reduction. Overall reaction efficiencies were found to be optimal when both electron donating and accepting groups were on a single dye molecule. [ABSTRACT FROM AUTHOR]

Designing highly active and durable electrocatalysts remain an ongoing challenge in the oxygen reduction reaction (ORR). Here, the reductive IL/Ti3C2Tx(FA) is produced in a water‐free mixture of formic acid (FA), ionic liquid (IL) and LiF, subsequently, the simultaneous reduction encapsulation trap the Pd nanocatalysts and IL within bilayer carbide‐derived carbon (CDC) to obtain Pd@IL/CDC(FA) with high metal loading up to 69.7%. Thereby, the featured active phases in Pd@IL/CDC(FA) impart potent chemical nanoconfinement to defend metals from dissolution and aggregation, boost mass and electron transfer, and mediate oxidation states and adsorption/desorption of metal Pd in the ORR. Instead of deactivation and Ostwald ripening, the catalytic performances of Pd@IL/CDC(FA) are gradually enhanced in an accelerated durability test up to 20 000 cycles. In a Zn–air battery, the Pd@IL/CDC(FA) cathode gives a specific capacity of 812.6 mAh gZn−1 and a voltage loss of only 41 mV in galvanostatic discharge for 1000 h. The work opens new venues in controllably preparing high activity and durable electrocatalysts from in‐situ generated CDCs. [ABSTRACT FROM AUTHOR]

The biorenewable alcohols are identified as the promising energy in fuel cells, but the lack of efficient catalysts limits the electricity output. Here, we chemically grew the PdAg alloy nanoparticles (NPs) on reduced graphene oxide (RGO) to obtain PdxAgy(m)/RGO, and investigated the dependences of peak current densities on the metal loadings (m), Pd mole fractions (x), and sizes. The maximal peak currents of 1.86, 4.88, 14.3 and 13.6 × 104 mA cm−2 mgPd−1 were respectively achieved in the electrooxidation reactions of methanol, ethanol, ethylene glycol and glycerol. It is shown that the interactions of PdAg NPs with RGO can control the catalytic efficiencies through mediating the electronic characteristics of metal NPs and the reactant absorptions. Except the catalysts for methanol oxidation reaction, the efficient catalysis possesses the same lattice structure in PdAg alloys with the optimized m, and gives a common descriptor to select the catalyst with high catalytic activity. Graph Abstarct: [ABSTRACT FROM AUTHOR]

Ti3C2Tx MXene is regarded as a promising material in energy-related applications; however, the overscreening charge effect of the electric double layer on electrified interfaces, along with "inert" F terminations, limits the electrochemical operation efficiencies. Here, we developed a protocol to harvest a coupled conductor through confining in situ 1-ethyl-3-methylimidazolium ([Emim]+) ions into Ti3C2Tx interlayers. The ionic–electronic coupling does not require any external counterions, but activates terminal F and even sub-surface Ti, and endows the conductor with metal-like and ionophilic characteristics. Different from physically preintercalated or adsorbed ions, the resulting chemically confined [Emim]+ ions offer more accessible electroactive sites, faster electron transport in surface redox, and more efficient channels for ion transfer. Hence, the Ti3C2Tx electrodes present high gravimetric capacitance, rate performance and cycling stability. This work highlights the important roles of the coupling in the design and research of mixed ionic–electronic conductors with high electrochemical activity. [ABSTRACT FROM AUTHOR]

Although significant progress has been made in the synthesis of covalent organic frameworks (COFs) in recent years, the construction of hierarchical pores in such materials remains a great challenge. Herein, we report a facile synthesis of hierarchically porous COFs (HP-COFs) under mild conditions in ionic liquids 1-alkyl-3-methylimidazolium tetrafluoroborates ([Cnmim][BF4], n = 4, 6, 10). It has been found that apart from the inherent micropores, a large mesoporous structure has been produced in the COFs in which the size of pores can be simply tuned by adjusting the alkyl chain length of the ionic liquids. These mesopores have been confirmed by N2 sorption and electron microscopy techniques. Importantly, this approach is applicable for the preparation of various HP-COFs, such as imine and hydrazone based COFs, which are quite difficult to acquire through traditional methods. In addition, these HP-COFs show highly effective catalytic performance for C–C bond formation, especially for large size molecule based C–C coupling reactions in comparison with uni-pore COFs. [ABSTRACT FROM AUTHOR]

The critical behavior of relative viscosity and intrinsic viscosity near the gelation point was experimentally examined for 1 g/100 ml alginate solution induced by cupric ions. The critical exponent of relative viscosity was found to be 1.27, which is in good agreement with the prediction of the percolation model based on a Rouse cluster approximation gives the exponent as 1.3. Critical behavior of intrinsic viscosity reveals that the constant of Huggins equation k′ for alginate clusters formed near the gelation point was considerably higher than that of linear alginate polychains in aqueous solution. Typically intramolecular crosslinking between polychains in the low cupric concentration could be detected in the plots of [η] vs molar fraction of cupric ions for the system. The weak divergence of intrinsic viscosity resembles the critical behavior of Zimm clusters predicted by the three-dimensional percolation theory rather than clusters of classical theory. © 1996 American Institute of Physics. [ABSTRACT FROM AUTHOR]

The charge transfer and active sites of metal-free imidazolium-based composites were unveiled by an electrochemical method with high sensitivity and selectivity due to the specific donor–acceptor coupling of imidazolium with NO2−. [ABSTRACT FROM AUTHOR]

Montmorillonite-supported nanoscale zero-valent iron (M-nZVI) was synthesized by sodium borohydride reduction and characterized by X-ray diffraction, X-ray photoelectron spectroscopy, and field emission scanning electron microscopy (FE-SEM). The interaction of uranium with M-nZVI was studied using batch technique under different experimental conditions such as pH, ionic strength, initial U(VI) concentration, solid-to-liquid ration ( m/V), and temperature. The presence of montmorillonite decreased the aggregation while increased the specific surface area (SSA) of the iron nanoparticles. The SSA for as-synthesized M-nZVI was 91.42 m/g, higher than 26.60 and 10.23 m/g for nZVI and montmorillonite, respectively. The removal efficiency of U(VI) using M-nZVI was significantly affected by the pH of the aqueous solution, whereas it was slightly affected by ionic strength and temperature. The isoelectric point of M-nZVI was at pH 5.6; however the results indicated that the optimum removal efficiency of U(VI) using M-nZVI was achieved at a pH range 3.0-5.0. The experiments with aqueous solution containing 100 μg/L of U(VI) showed that the removal efficiency of the as-synthesized M-nZVI was about 978 μg/g at pH 3.0. These results show that M-nZVI has a potential as a novel material for removing U(VI) from aqueous solution. [ABSTRACT FROM AUTHOR]

Densities have been measured for Glucose + HCl +Water at 10-degree intervals from 278.15 to 318.15 K. The apparent molar volumes ( V Φ,G) and standard partial molar volumes ( V ) for Glucose in aqueous solution of 0.2, 0.4, 0.7, 1.1, 1.6, 2.1 mol·kg−1 HCl have been calculated as well as volumetric interaction parameters ( V EG) for Glucose — HCl in water and standard partial molar expansion coefficients (∂ V / ∂ T)p. Results show that (1) the apparent molar volume for Glucose in aqueous HCl solutions increases lineally with increasing molality of Glucose and HCl; (2) V Φ,G/0 for Glucose in aqueous HCl solutions increases lineally with increasing molality of HCl; (3) the volumetric interaction parameters for Glucose — HCl pair in water are small positive and vary slightly with temperature; (4) the relation between V and temperature exists as V = a 0 + a 1( T − 273.15 K)2/3; (5) values of (∂ V / ∂ T)p are positive and increase as temperatures rise, and at given temperatures decrease slightly with increasing molalities of HCl, indicating that the hydration of glucose decreases with increasing temperature and molality of HCl. These phenomena are interpreted successfully by the structure interaction model. [ABSTRACT FROM AUTHOR]

An electromotive force (emf) method was used to determine thermodynamic parameters of interaction of HCl with normal 1-butanol ( n-BuOH) in water between 5 and 45°C. A comparison of pair interaction parameters for HCl– n-BuOH with those for HCl– t-BuOH (tert butyl alcohol) showed that there is an obvious difference between them. This was interpreted in terms of steric structure of their carbon chains. The group Gibbs free energy parameters ( $$G_{HCl} - {CH}_{2} $$ and $$G_{HCl} - {OH} $$ ) for the HCl–alcohol–water systems were derived according to the Savage–Wood group additivity principle. These group parameters can be used to evaluate pair interaction parameters of HCl with alcohol molecules. [ABSTRACT FROM AUTHOR]

Ternary composite with immobilization of Fe2O3 nanoparticles (NPs) onto porous polydopamine-reduced graphene oxide framework, abbreviated as Fe2O3@PDA-RGO, was fabricated via a simple, scalable and cost-efficient hydrothermal reaction. The as-prepared 3D Fe2O3@PDA-RGO nanocomposite provides a specific surface area of 119.9 m2 g-1 on account of the well-dispersed Fe2O3 NPs (~35 nm) onto the PDA-RGO sheets as spacer. When applied as a special faradic electrode material in negative potential region, Fe2O3@PDA-RGO can offer 169 mA h g-1 (609 F g−1) at 1 A g-1. The fabricated AC//Fe2O3@PDA-RGO asymmetric supercapacitor (ASC) delivers an energy density of 35.8 W h kg-1 (0.94 mW h cm-3) at 800 W kg-1 (21 mW cm-3) and an outstanding cyclic stability (75.7% capacity retention after 10,000 cycles). The good performance of Fe2O3@PDA-RGO in single-electrode and ASC manifests the potential the ternary composite in energy storage devices. [ABSTRACT FROM AUTHOR]

Biomineralization induced by microorganisms has become a hot spot in the field of carbonate sedimentology; however, the mechanisms involved still need to be explored. In this study, the bacterium Bacillus subtilis J2 (GenBank MG575432) was used to induce the precipitation of calcium carbonate minerals at Mg/Ca molar ratios of 0, 3, 6, 9, and 12. Bacillus subtilis J2 bacteria released ammonia to increase pH, but the ammonia released only made the pH increase to 8.25. Carbonic anhydrase was also produced to catalyze the hydration of carbon dioxide, and this process released carbonate and bicarbonate ions that not only increased pH but also elevated carbonate supersaturation. The biominerals formed at a Mg/Ca molar ratio of 0 were spherulitic, elongated, dumbbell-shaped, and irregularly rhombohedral calcite; at a Mg/Ca molar ratio of 3, the biominerals were calcite and aragonite, the weight ratio of calcite decreased from 26.7% to 15.6%, and that of aragonite increased from 73.3% to 84.4% with increasing incubation time. At higher Mg/Ca molar ratios, the biominerals were aragonite, and the crystallinity and thermal stability of aragonite decreased with increasing Mg/Ca molar ratios. FTIR results showed that many organic functional groups were present on/within the biominerals, such as C–O–C, N–H, C=O, O–H, and C–H. HRTEM-SAED examination of the ultra-thin slices of B. subtilis J2 bacteria showed that nano-sized minerals with poor crystal structure had grown or been adsorbed on the EPS coating. The EPS of the B. subtilis J2 strain contained abundant glutamic acid and aspartic acid, which could be deprotonated in an alkaline condition to adsorb Ca2+ and Mg2+ ions; this made EPS act as the nucleation sites. This study may provide some references for further understanding of the mechanism of biomineralization induced by microorganisms. [ABSTRACT FROM AUTHOR]