Search

Background: To evaluate whether the use of the internal target volume (ITV) delineation method improves the performance of intensity‐modulated radiotherapy (IMRT) and three‐dimensional conformal radiotherapy (3DCRT) in terms of survival, acute toxicities, and dose–volume parameters. Methods: A total number of 477 cervical cancer patients who received concurrent chemoradiotherapy (CCRT) from January 2012 to December 2016 were retrospectively analyzed. They were divided into four groups: the non‐ITV (N‐ITV) + IMRT, ITV + IMRT, N‐ITV + 3DCRT, and ITV + 3DCRT groups, with 76, 41, 327, and 33 patients, respectively. Survival analysis was performed with the Kaplan–Meier and the log‐rank tests, and acute toxicity analysis was performed with the chi‐squared test and the binary logistic regression test. Using the propensity score matching (PSM) method, 92 patients were matched among the four groups, and their dose–volume parameters were assessed with the Kruskal–Wallis method. Results: The median follow‐up time was 49 months (1–119) for overall survival (OS). The 5‐year OS rate was 66.4%. The ITV delineation method was an independent prognostic factor for OS (HR [95% CI]: 0.52 [0.27, 0.98], p = 0.044) and progression‐free survival (PFS) (HR [95% CI]: 0.59 [0.36, 0.99], p = 0.045). The ITV + IMRT group had the lowest incidence rate (22%) and the N‐ITV + IMRT group had the highest incidence rate of grade ≥3 hematological toxicity (HT) (46.1%) among the four groups. The pelvic bone marrow relative V10, V20, and V30 in the N‐ITV + IMRT group was higher than those in the ITV + IMRT and N‐ITV + 3DCRT groups (p < 0.05). Conclusions: The use of ITV for IMRT treatment planning was associated with improved overall survival and progression‐free survival, with lower HT rate. [ABSTRACT FROM AUTHOR]

Conducting atomic force microscopy and scanning surface potential microscopy were adopted to study the nanoscale surface electrical properties of aluminum zinc oxide (AZO) films that were prepared by pulsed laser deposition (PLD) at various substrate temperatures for use as anode materials in polymer light-emitting diodes (PLEDs). Experimental results indicate that when substrate temperatures exceed 100 °C, the local conductivity and work function are positively correlated with the concentrations of Al dopant and O2- on AZO surface. When the substrate temperature is approximately 150 °C, the percentage coverage of conducting regions of the AZO surface and the mean work function are 90.20% and 4.85 eV, respectively. Additionally, both microcosmic uniformities meet the standard applied to PLEDs. This low-temperature condition for PLD significantly reduces the yield rate of impurities when AZO vacuum evaporation is performed on a plastic substrate, supporting various applications of AZO films. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Zhejiang University: Science B is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Objective: To investigate the effects of corneal thickness distribution and apex position on postoperative refractive status after full-bed deep anterior lamellar keratoplasty (FBDALK).Methods: This is a retrospective analysis of patients who were diagnosed with advanced keratoconus between 2011 and 2014 in our hospital. The base of the cone in all patients did not exceed the central cornea at a 6-mm range. The FBDALK was performed by a same surgeon. All patients had a complete corneal suture removal and the follow-up records were intact. Patients who had graft-bed misalignment or who were complicated with a cataract or glaucoma were excluded. Uncorrected visual acuity (UCVA), best spectacle corrected visual acuity (BSCVA), and Pentacam examination data were recorded at two years postoperatively. The recorded data included the superior-inferior (S-I) and nasal-temporal (N-T) corneal thickness differences in 2, 4, 6, and 8 mm diameter concentric circles with the corneal apex as the center (S-I2 mm, S-I4 mm, S-I6 mm, S-I8 mm, N-T2 mm, N-T4 mm, N-T6 mm, and N-T8 mm), the linear, X-axis, and Y-axis distance between the corneal pupillary center and the cornea apex, total corneal astigmatism at a zone of 3 mm diameter from the corneal apex (TA3 mm), the astigmatic vector values J0 and J45, and the corneal total higher-order aberration for 3 and 6 mm pupil diameters (HOA3 mm and HOA6 mm). Statistical analysis was performed by SPSS 15.0.Results: A total of 47 eyes of 46 patients met the criteria and were included in this study. The mean follow-up time was (28±7) months. The mean UCVA was 0.45±0.23 (logMAR) (MAR: minimum angle of resolution) and the mean BSCVA was 0.19±0.15 (logMAR), which were all significantly positively correlated with postoperative TA3 mm and HOA3 mm. The mean S-I corneal thickness differences were (44.62±37.74) μm, and the mean N-T was (38.57±32.29) μm. S-I2 mm was significantly positively correlated with J0 (r=0.31), J45 (r=0.42), HOA3 mm (r=0.37), and HOA6 mm (r=0.48). S-I4 mm and S-I8 mm were significantly positively correlated with HOA3 mm (r=0.30, r=0.40) and HOA6 mm (r=0.46, r=0.35). The X-axis distance between corneal pupillary center and corneal apex was significantly positively correlated with J45 (r=0.29).Conclusions: In patients with advanced keratoconus after FBDALK, the unevenly distributed thickness at corneal pupillary area and the misalignment of corneal apex and pupillary center might cause significant regular and irregular astigmatism, which affected the postoperative visual quality. [ABSTRACT FROM AUTHOR]

Objective: To assess the lower tear meniscus height (LTMH), central tear film thickness (CTFT), and central corneal epithelial thickness (CCET) after deep anterior lamellar keratoplasty (DALK).Methods: This was a retrospective cross-sectional study of 20 patients who had DALK in one eye over a three-month period. LTMH, CTFT, and CCET of the operated eyes and the unoperated fellow eyes were measured using high-definition optical coherence tomography (HD-OCT). Correlations between three OCT assessments and age, time following surgery, graft size, bed size, and the number of residual sutures were analyzed.Results: Compared to patients with keratoconus, patients with other corneal conditions had significantly higher CCET in the fellow eye (P=0.024). For all patients, CCET in the operated eye was significantly negatively correlated with the number of residual sutures (R=−0.579, P=0.008), and was significantly positively correlated with time following surgery (R=0.636, P=0.003). In the fellow eye, a significant positive correlation was found between age and CCET (R=0.551, P=0.012), and a significant negative correlation between age and CTFT (R=−0.491, P=0.028). LTMH was found to be significantly correlated between operated and fellow eyes (R=0.554, P=0.011). There was no significant correlation between LTMH and age, bed/graft size, time following surgery, or residual sutures (all possible correlations, P>0.05).Conclusions: Patients with keratoconus tend to have a thinner central corneal epithelium. Corneal epithelium keeps regenerating over time after DALK. DALK did not induce a significant change in tear volume compared with the fellow eye. Postoperative tear function might depend on an individual’s general condition, rather than on age, gender, bed/graft size, time following surgery, or residual sutures. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Zhejiang University: Science B is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Purpose: To evaluate the dosimetric outcomes of a simple planning technique for improving intensity-modulated radiotherapy (IMRT) for nasopharyngeal cancer (NPC). Methods: For 39 NPC cases, generally acceptable original plans were generated and were improved by the two planning techniques, respectively: (1) a basal-dose-compensation (BDC) technique, in which the treatment plans were re-optimized based on the original plans; (2) a local-dose-control (LDC) technique, in which the original plans were re-optimized with constraints for hot and cold spots. The BDC, original, and LDC plans were then compared regarding homogeneity index (HI) and conformity index (CI) of planning target volumes (PTVs), organ-at-risk (OAR) sparing and monitor units (MUs) per fraction. The whole planning times were also compared between the BDC and LDC plans. Results: The BDC plans had superior HIs / CIs, by 13-24% / 3-243%, respectively, over the original plans. Compared to the LDC plans, the BDC plans provided better HIs only for PTVnx (the PTV of nasopharyngeal primary tumor) by 11% and better CIs for all PTVs by 2-134%. The BDC technique spared most OARs, by 1-9%. The average MUs of the BDC, original, and LDC plans were 2149, 2068 and 2179, respectively. The average whole planning times were 48 and 69 minutes for the BDC and LDC plans, respectively. Conclusions: For the IMRT of nasopharyngeal cancer, the BDC planning technique can improve target dose homogeneity, conformity and OAR sparing, with better planning efficiency. [ABSTRACT FROM AUTHOR]

Purpose: To assess the performance of a simple optimisation method for improving target coverage and organ-at-risk (OAR) sparing in intensity-modulated radiotherapy (IMRT) for cervical oesophageal cancer. Methods: For 20 selected patients, clinically acceptable original IMRT plans (Original plans) were created, and two optimisation methods were adopted to improve the plans: 1) a base dose function (BDF)-based method, in which the treatment plans were re-optimised based on the original plans, and 2) a dose-controlling structure (DCS)-based method, in which the original plans were re-optimised by assigning additional constraints for hot and cold spots. The Original, BDF-based and DCS-based plans were compared with regard to target dose homogeneity, conformity, OAR sparing, planning time and monitor units (MUs). Dosimetric verifications were performed and delivery times were recorded for the BDF-based and DCS-based plans. Results: The BDF-based plans provided significantly superior dose homogeneity and conformity compared with both the DCS-based and Original plans. The BDF-based method further reduced the doses delivered to the OARs by approximately 1–3%. The re-optimisation time was reduced by approximately 28%, but the MUs and delivery time were slightly increased. All verification tests were passed and no significant differences were found. Conclusion: The BDF-based method for the optimisation of IMRT for cervical oesophageal cancer can achieve significantly better dose distributions with better planning efficiency at the expense of slightly more MUs. [ABSTRACT FROM AUTHOR]

In this study, conducting atomic force microscopy was employed to investigate the nanoscale surface electrical properties of zinc oxide (ZnO) films prepared by pulsed laser deposition (PLD) at different substrate temperatures for use as anode materials in polymer light-emitting diodes. The results show that the surface conductivity distribution of ZnO is related to its surface structure. At substrate temperatures of 150-200°C, the conducting regions may cover over 90% of the ZnO thin-film surface, thus providing the best local conductivity. Moreover, heating at substrate temperatures of above 250°C can effectively make the conductivity on the ZnO surface uniform. In particular, at substrate temperatures of around 300°C, the conducting regions where currents are between 1 and 2 μA may cover as much as 83% of the surface, and furthermore, the transmission ratio in the visible range is higher than 80%. This is a rather ideal production temperature for the PLD for ZnO films. Microsc. Res. Tech., 2008. © 2007 Wiley-Liss, Inc. [ABSTRACT FROM AUTHOR]

A correction to the article "Nanoscale surface electrical properties of aluminum zinc oxide thin films investigated by scanning probe microscopy" that was published online on July 6, 2009 is presented.