Search

Photoactive black‐phase formamidinium lead triiodide (α‐FAPbI3) perovskite has dominated the prevailing high‐performance perovskite solar cells (PSCs), normally for those spin‐coated, conventional n‐i‐p structured devices. Unfortunately, α‐FAPbI3 has not been made full use of its advantages in inverted p‐i‐n structured PSCs fabricated via blade‐coating techniques owing to uncontrollable crystallization kinetics and complicated phase evolution of FAPbI3 perovskites during film formation. Herein, a customized crystal surface energy regulation strategy has been innovatively developed by incorporating 0.5 mol % of N‐aminoethylpiperazine hydroiodide (NAPI) additive into α‐FAPbI3 crystal‐derived perovskite ink, which enabled the formation of highly‐oriented α‐FAPbI3 films. We deciphered the phase transformation mechanisms and crystallization kinetics of blade‐coated α‐FAPbI3 perovskite films via combining a series of in‐situ characterizations and theoretical calculations. Interestingly, the strong chemical interactions between the NAPI and inorganic Pb−I framework help to reduce the surface energy of (100) crystal plane by 42 %, retard the crystallization rate and lower the formation energy of α‐FAPbI3. Benefited from multifaceted advantages of promoted charge extraction and suppressed non‐radiative recombination, the resultant blade‐coated inverted PSCs based on (100)‐oriented α‐FAPbI3 perovskite films realized promising efficiencies up to 24.16 % (~26.5 % higher than that of the randomly‐oriented counterparts), accompanied by improved operational stability. This result represented one of the best performances reported to date for FAPbI3‐based inverted PSCs fabricated via scalable deposition methods. [ABSTRACT FROM AUTHOR]

Photoactive black‐phase formamidinium lead triiodide (α‐FAPbI3) perovskite has dominated the prevailing high‐performance perovskite solar cells (PSCs), normally for those spin‐coated, conventional n‐i‐p structured devices. Unfortunately, α‐FAPbI3 has not been made full use of its advantages in inverted p‐i‐n structured PSCs fabricated via blade‐coating techniques owing to uncontrollable crystallization kinetics and complicated phase evolution of FAPbI3 perovskites during film formation. Herein, a customized crystal surface energy regulation strategy has been innovatively developed by incorporating 0.5 mol % of N‐aminoethylpiperazine hydroiodide (NAPI) additive into α‐FAPbI3 crystal‐derived perovskite ink, which enabled the formation of highly‐oriented α‐FAPbI3 films. We deciphered the phase transformation mechanisms and crystallization kinetics of blade‐coated α‐FAPbI3 perovskite films via combining a series of in‐situ characterizations and theoretical calculations. Interestingly, the strong chemical interactions between the NAPI and inorganic Pb−I framework help to reduce the surface energy of (100) crystal plane by 42 %, retard the crystallization rate and lower the formation energy of α‐FAPbI3. Benefited from multifaceted advantages of promoted charge extraction and suppressed non‐radiative recombination, the resultant blade‐coated inverted PSCs based on (100)‐oriented α‐FAPbI3 perovskite films realized promising efficiencies up to 24.16 % (~26.5 % higher than that of the randomly‐oriented counterparts), accompanied by improved operational stability. This result represented one of the best performances reported to date for FAPbI3‐based inverted PSCs fabricated via scalable deposition methods. [ABSTRACT FROM AUTHOR]

Perovskite solar cells (PSCs) have experienced exceptional development in recent years, due to their outstanding photoelectronic properties and low‐cost solution processing. Many state‐of‐the‐art PSC designs have been effectively demonstrated using a stacked 3D perovskite/2D perovskite heterostructure, yet limitations arise due to the low conductivity of the 2D perovskite, the hidden buried interface of 3D perovskite, and halide ion migration within 3D/2D PSC device under operational bias. Here, these limitations are overcome by developing a novel and universal post‐synthetic metal (Zn2+) doping strategy and realizing 3D/2D PSCs with superior efficiency and stability. Informed by ab initio calculations and synchrotron fine structure experiments, it is revealed that the introduced zinc ions are energetically favored at interstitial crystal sites, subsequently hindering the migration of halide ions and producing a beneficial shift toward a more n‐type character in the buried 3D perovskite interface. Combined with extensive photophysical characterization, the Zn2+‐modified 3D/2D perovskite thin film is shown to strongly recover its photo‐carrier conductivity compared with the 3D/2D perovskite film, boosting the efficiency (22.90%) of PSCs while exhibiting improved humidity and operational stability. [ABSTRACT FROM AUTHOR]

Eukaryotic cells possess multiple mechanisms of self‐destruction, including pyroptosis and necroptosis. Pyroptosis is a type of programmed cell death characterized by cellular rupture and linked to inflammation. SnoRNA, a small non‐coding RNA in the nucleolus, can dysregulate specific RNAs through 2'‐O‐methylation, contributing to tumorigenesis. Our StarBase and qRT‐PCR analysis revealed SNORD99 upregulation in endometrial cancer (EC) tissue compared to normal tissue, suggesting its role in pathogenesis. SNORD99 overexpression enhanced migration and proliferation of EC cells, while ASO‐mediated suppression reduced malignant cell spread and division. RNA‐seq and base‐comparing analysis identified GSDMD's differential expression upon SNORD99 overexpression, forming the SNORD99‐FBL RNP complex. RTL‐P experiments showed SNORD99 increased GSDMD's 2'‐O‐methylation. SNORD99 reduced GSDMD, caspase‐1, and NLRP3 protein levels, implicating its role in pyroptosis. Optical and electron microscopy confirmed enhanced pyroptosis features. In summary, SNORD99 modifies GSDMD via 2'‐O‐methylation, suppressing pyroptosis and promoting EC progression. Developing pyroptosis‐inducing drugs may offer new cancer treatment avenues. [ABSTRACT FROM AUTHOR]

State‐of‐the‐art, high‐performance solar cells and light‐emitting diodes normally rely on tedious layer‐by‐layer sequential deposition of carrier transport layer and light‐absorbing/emitting layers, which is not cost‐effective. Several recent exciting works have demonstrated surprising breakthroughs in terms of simplified processing of these optoelectronic devices. Upon the incorporation of carbazole phosphonic acid molecules and their derivatives into precursor ink beforehand, charge‐selective contact could spontaneously self‐assemble at the buried interface between the conducting substrate and photoactive layer, which results in the construction of simplified‐structured devices that yield comparable optoelectronic performances to the conventionally fabricated devices with full architectures. Herein, the recent groundbreaking advancement of high‐performance optoelectronic devices fabricated via a convenient codeposition technique is summarized, with particular emphasis on elucidating the chemical mechanism of self‐assembly mode and highlighting the unique advantages of this strategy on crystallization regulation, targeted defect passivation, carrier dynamics modulation, and comprehensive device performance improvement. Finally, the associated challenges are critically discussed and the future research directions are insightfully proposed, which can revolutionize the pathway toward constructing highly efficient optoelectronic devices in a cost‐effective manner and setting forward to future commercialization. [ABSTRACT FROM AUTHOR]

Three types of steels were designed on the basis of GX40CrNiSi25-12 austenitic heat resistant steel by adding different Mn contents (2wt.%, 6wt.%, and 12wt.%). Thermodynamic calculation, microstructure characterization and mechanical property tests were conducted to investigate the effect of Mn addition on the microstructure and mechanical properties of the austenitic heat resistant steel. Results show that the matrix structure in all the three types of steels at room temperature is completely austenite. Carbides NbC and M23C6 precipitate at grain boundaries of austenite matrix. With the increase of Mn content, the number of carbides increases and their distribution becomes more uniform. With the Mn content increases from 1.99% to 12.06%, the ultimate tensile strength, yield strength and elongation increase by 14.6%, 8.0% and 46.3%, respectively. The improvement of the mechanical properties of austenitic steels can be explained by utilizing classic theories of alloy strengthening, including solid solution strengthening, precipitation strengthening, and grain refinement. The increase in alloy strength can be attributed to solid solution strengthening and precipitation strengthening caused by the addition of Mn. The improvement of the plasticity of austenitic steels can be explained from two aspects: grain refinement and homogenization of precipitated phases. [ABSTRACT FROM AUTHOR]

Dendrite growth is a complex liquid-solid phase transition process involving multiple physical factors. A phase-field lattice-Boltzmann method was developed to simulate the two- and three-dimension dendrite growth of Al-Cu alloy. The effect of fully coupled thermal-solute-convection interaction on the dendrite growth was investigated by incorporating a parallel-adaptive mesh refinement algorithm into the numerical model. By accurately reproducing the latent heat release, solute diffusion and convective transport behaviors at the liquid-solid interface, the interaction mechanism among thermal-solute-convection transport as well as their coupling effects on the dendrite growth dynamics were discussed. The simulation results show that the release of latent heat slows down the dendrite growth rate, and both natural and forced convection disrupt the symmetrical growth of dendrites. Their combination makes the growth of dendrites more complex, capturing important physical aspects such as recalescence, dendrite tip splitting, dendrite tilting, dendrite remelting, and solute plume in the simulation case. Based on the robustness and powerful ability of the numerical model, the formation mechanisms of these physical aspects were revealed. [ABSTRACT FROM AUTHOR]

A new species of xenodermid snake, Achalinus nanshanensis H. Li, L.-Q. Zhu, Z.-Q. Zhang & X.-Y. Mo, sp. nov., is described based on three specimens collected from Nanshan National Park and Tongdao County of southwest Hunan Province. This new species is genetically distinct amongst its congeners with the mitochondrial COI uncorrected p-distance ranging from 4.4% (in A. yangdatongi) to 17.7% (in A. meiguensis). In addition, this new species can be distinguished from its congeners by a combination of the following morphological characters: (1) dorsal scales with 23 or 25 rows throughout and strongly keeled; (2) tail relatively longer so that TaL/ToL = 0.215-0.248; (3) length of suture between internasals significantly longer than that between prefrontals, LSBI/LSBP = 1.66-1.84; (4) single loreal scale present; (5) SPL 6 in number, with the fourth and fifth contacting eye; (6) IFL 6 in number, with the first three touching the first pair of chin shields; (7) TMP is 2-2-4/2-2(3)-4, with the anterior pair elongated and in contact with the eye; (8) ventrals 2 + 147-158; (9) subcaudals 64-77, unpaired; (10) dorsal body brownish black, with a bright yellow neck collar extending to the head and abdomen in the occipital region. The recognition of the new species increases the number of described Achalinus species to 28, of which 21 are found in China. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Central South University is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Sn perovskite solar cells have been regarded as one of the most promising alternatives to the Pb‐based counterparts due to their low toxicity and excellent optoelectronic properties. However, the Sn perovskites are notorious to feature heavy p‐doping characteristics and possess abundant vacancy defects, which result in under‐optimized interfacial energy level alignment and severe nonradiative recombination. Here, we reported a synergic "electron and defect compensation" strategy to simultaneously modulate the electronic structures and defect profiles of Sn perovskites via incorporating a traced amount (0.1 mol %) of heterovalent metal halide salts. Consequently, the doping level of modified Sn perovskites was altered from heavy p‐type to weak p‐type (i.e. up‐shifting the Fermi level by ∼0.12 eV) that determinately reducing the barrier of interfacial charge extraction and effectively suppressing the charge recombination loss throughout the bulk perovskite film and at relevant interfaces. Pioneeringly, the resultant device modified with electron and defect compensation realized a champion efficiency of 14.02 %, which is ∼46 % higher than that of control device (9.56 %). Notably, a record‐high photovoltage of 1.013 V was attained, corresponding to the lowest voltage deficit of 0.38 eV reported to date, and narrowing the gap with Pb‐based analogues (∼0.30 V). [ABSTRACT FROM AUTHOR]

Sn perovskite solar cells have been regarded as one of the most promising alternatives to the Pb‐based counterparts due to their low toxicity and excellent optoelectronic properties. However, the Sn perovskites are notorious to feature heavy p‐doping characteristics and possess abundant vacancy defects, which result in under‐optimized interfacial energy level alignment and severe nonradiative recombination. Here, we reported a synergic "electron and defect compensation" strategy to simultaneously modulate the electronic structures and defect profiles of Sn perovskites via incorporating a traced amount (0.1 mol %) of heterovalent metal halide salts. Consequently, the doping level of modified Sn perovskites was altered from heavy p‐type to weak p‐type (i.e. up‐shifting the Fermi level by ~0.12 eV) that determinately reducing the barrier of interfacial charge extraction and effectively suppressing the charge recombination loss throughout the bulk perovskite film and at relevant interfaces. Pioneeringly, the resultant device modified with electron and defect compensation realized a champion efficiency of 14.02 %, which is ~46 % higher than that of control device (9.56 %). Notably, a record‐high photovoltage of 1.013 V was attained, corresponding to the lowest voltage deficit of 0.38 eV reported to date, and narrowing the gap with Pb‐based analogues (~0.30 V). [ABSTRACT FROM AUTHOR]

The 2D/3D perovskite heterostructures have been widely investigated to enhance the efficiency and stability of perovskite solar cells (PSCs). However, rational manipulation of phase distribution and energy level alignment in such 2D/3D perovskite hybrids are still of great challenge. Herein, we successfully achieved spontaneous phase alignment of 2D/3D perovskite heterostructures by concurrently introducing both 2D perovskite component and organic halide additive. The graded phase distribution of 2D perovskites with different n values and 3D perovskites induced favorable energy band alignment across the perovskite film and boosted the charge transfer at the relevant heterointerfaces. Moreover, the 2D perovskite component also acted as a "band‐aid" to simultaneously passivate the defects and release the residual tensile stress of perovskite films. Encouragingly, the blade‐coated PSCs based on only ≈2 s in‐situ fast annealed 2D/3D perovskite films with favorable energy funnels and toughened heterointerfaces achieved promising efficiencies of 22.5 %, accompanied by extended lifespan. To our knowledge, this is the highest reported efficiency for the PSCs fabricated with energy‐saved thermal treatment just within a few seconds, which also outperformed those state‐of‐the‐art annealing‐free analogues. Such a two‐second‐in‐situ‐annealing technique could save the energy cost by up to 99.6 % during device fabrication, which will grant its low‐coast implementation. [ABSTRACT FROM AUTHOR]

The 2D/3D perovskite heterostructures have been widely investigated to enhance the efficiency and stability of perovskite solar cells (PSCs). However, rational manipulation of phase distribution and energy level alignment in such 2D/3D perovskite hybrids are still of great challenge. Herein, we successfully achieved spontaneous phase alignment of 2D/3D perovskite heterostructures by concurrently introducing both 2D perovskite component and organic halide additive. The graded phase distribution of 2D perovskites with different n values and 3D perovskites induced favorable energy band alignment across the perovskite film and boosted the charge transfer at the relevant heterointerfaces. Moreover, the 2D perovskite component also acted as a "band‐aid" to simultaneously passivate the defects and release the residual tensile stress of perovskite films. Encouragingly, the blade‐coated PSCs based on only ≈2 s in‐situ fast annealed 2D/3D perovskite films with favorable energy funnels and toughened heterointerfaces achieved promising efficiencies of 22.5 %, accompanied by extended lifespan. To our knowledge, this is the highest reported efficiency for the PSCs fabricated with energy‐saved thermal treatment just within a few seconds, which also outperformed those state‐of‐the‐art annealing‐free analogues. Such a two‐second‐in‐situ‐annealing technique could save the energy cost by up to 99.6 % during device fabrication, which will grant its low‐coast implementation. [ABSTRACT FROM AUTHOR]

The perovskite solar cells (PSCs) are promising for commercialization and practical application. However, high‐quality perovskite films are normally fabricated in inert gas‐filled glovebox, followed by thermal annealing, which is energy‐consuming and thus not cost‐effective. In this study, a simple manufacturing strategy is demonstrated to fabricate the highly‐crystalline perovskite films in ambient air (a relative humidity of over ≈50%) at room temperature via blade‐coating without the subsequent thermal–annealing. The perovskite precursor chemistry is tailored by solvent engineering via employing 2‐methoxyethanol, which can strongly coordinate with ammonium halide species, thus forming highly uniform small‐sized colloids and facilitating the homogeneous nucleation and rapid crystallization of perovskite films even at room temperature. The resultant PSCs fabricated with ambient‐processed, annealing‐free MAPbI3 perovskite films exhibit a champion efficiency up to 19.16% with negligible hysteresis and improved reproducibility, which is on par with the high‐temperature annealed counterparts fabricated in N2, and represented one of the highest reported efficiencies for the room‐temperature processed PSCs in ambient air. The unencapsulated devices show extended lifespan over 1000 h with nearly no efficiency loss. [ABSTRACT FROM AUTHOR]

Organic nonlinear optical materials have potential in applications such as lightings and bioimaging, but tend to have low photoluminescent quantum yields and are prone to lose the nonlinear optical activity. Herein, we demonstrate to weave large-area, flexible organic nonlinear optical membranes composed of 4-N,N-dimethylamino-4ʹ-Nʹ-methyl-stilbazolium tosylate@cyclodextrin host-guest supramolecular complex. These membranes exhibited a record high photoluminescence quantum yield of 73.5%, and could continuously emit orange luminescence even being heated at 300 °C, thus enabling the fabrication of thermotolerant light-emitting diodes. The nonlinear optical property of these membranes can be well-preserved even in polar environment. The supramolecular assemblies with multiphoton absorption characteristics were used for in vivo real-time imaging of Escherichia coli at 1000 nm excitation. These findings demonstrate to achieve scalable fabrication of organic nonlinear optical materials with high photoluminescence quantum yields, and good stability against thermal stress and polar environment for high-performance, durable optoelectronic devices and humanized multiphoton bio-probes. Organic nonlinear optical materials have potential in applications such as bioimaging, but tend to have low photoluminescent quantum yields and are prone to aggregation-caused quenching. Here, the authors report a host-guest approach for improving the luminescent properties of these materials. [ABSTRACT FROM AUTHOR]

Bandgap-graded materials present varying spectral responses at different positions, making them possible to be used as an alternative to photoactive materials array in multi-spectral responsive devices, thus miniaturizing the apparatus. However, the preparation of bandgap-graded materials usually requires complicated deposition process. Here we report a facile low-temperature solution process to make films with lateral bandgap gradients, which form spontaneously via self-spreading and interdiffusion of solutions. We show lead halide perovskite films with MAPbCl3−MAPbBr3 and MAPbBr3−MAPbI3 gradients, which exhibit light absorption onsets ranging from 410 to 781 nm. The bandgap-graded films were used to make self-powered multiband photodetectors, which show different spectral responses at different positions without applying bias voltage. Furthermore, self-powered spectrometers were made by using the multiband photodetectors. [ABSTRACT FROM AUTHOR]

Mixed‐cation, small band‐gap perovskites via rationally alloying formamidinium (FA) and methylammonium (MA) together have been widely employed for blade‐coated perovskite solar cells with satisfied efficiencies. One of the stringent challenges lies in difficult control of the nucleation and crystallization kinetics of the perovskites with mixed ingredients. Herein, a pre‐seeding strategy by mixing FAPbI3 solution with pre‐synthesized MAPbI3 microcrystals has been developed to smartly decouple the nucleation and crystallization process. As a result, the time window of initialized crystallization has been greatly extended by 3 folds (i.e. from 5 s to 20 s), which enables the formation of uniform and homogeneous alloyed‐FAMA perovskite films with designated stoichiometric ratios. The resultant blade‐coated solar cells achieved a champion efficiency of 24.31 % accompanied by outstanding reproducibility with more than 87 % of the devices showing efficiencies higher than 23 %. [ABSTRACT FROM AUTHOR]

Mixed‐cation, small band‐gap perovskites via rationally alloying formamidinium (FA) and methylammonium (MA) together have been widely employed for blade‐coated perovskite solar cells with satisfied efficiencies. One of the stringent challenges lies in difficult control of the nucleation and crystallization kinetics of the perovskites with mixed ingredients. Herein, a pre‐seeding strategy by mixing FAPbI3 solution with pre‐synthesized MAPbI3 microcrystals has been developed to smartly decouple the nucleation and crystallization process. As a result, the time window of initialized crystallization has been greatly extended by 3 folds (i.e. from 5 s to 20 s), which enables the formation of uniform and homogeneous alloyed‐FAMA perovskite films with designated stoichiometric ratios. The resultant blade‐coated solar cells achieved a champion efficiency of 24.31 % accompanied by outstanding reproducibility with more than 87 % of the devices showing efficiencies higher than 23 %. [ABSTRACT FROM AUTHOR]

Background and Aims: Abnormal expression of E3 ubiquitin ligase plays an important role in the development and progression of hepatocellular carcinoma (HCC), although the mechanism has remained elusive. This study aimed to investigate the biological function and potential mechanism of FBXO43 in HCC. Methods: FBXO43 expression in tissues and cells were detected by quantitative real-time PCR (qRT-PCR), Western blot, and immunohistochemistry (IHC). The Kaplan-Meier method and Cox regression analysis were used to explore the correlation between the expression level of FBXO43 and the clinical survival. MTT assay, EdU incorporation, colony formation, Transwell, and wound healing assays were performed to evaluate the function of FBXO43 in cell proliferation and migration in vitro. The interaction between FBXO43 and cyclin D1 (CCND1) was assessed by co-immunoprecipitation (Co-IP) assay and in vivo ubiquitination assay. Results: We found that FBXO43 was upregulated in HCC patient tissues and positively associated with poor clinicopathological features. Meanwhile, HCC patients with high expression of FBXO43 had shorter overall survival (OS) and disease-free survival (DFS). Furthermore, knockdown of FBXO43 inhibited HCC cell proliferation, migration and epithelial-mesenchymal transition (EMT) in HCC cells. Mechanistically, FBXO43 interacted with CCND1 and promoted its stability by polyubiquitination, leading to HCC cell proliferation, migration and EMT. Functional rescue experiments demonstrated that knockdown of CCND1 blocks FBXO43-mediated cell proliferation and metastasis. Conclusions: FBXO43, as an independent prognostic biomarker, promotes HCC cell proliferation, metastasis and EMT by stability of CCND1, which provides a new potential strategy for HCC treatment by targeting FBXO43-CCND1 axis. [ABSTRACT FROM AUTHOR]

Purpose: This study aimed to investigate the correlation between sonographic features and central neck lymph node metastasis (CNLM) in solitary solid papillary thyroid microcarcinoma (PTMC) with a taller-than-wide shape. Methods: A total of 103 patients with solitary solid PTMC with a taller-than-wide shape on ultrasonography who underwent surgical histopathological examination were retrospectively selected. Based on the presence or absence of CNLM, patients with PTMC were divided into a CNLM (n = 45) or nonmetastatic (n = 58) group, respectively. Clinical findings and ultrasonographic features, including a suspicious thyroid capsule involvement sign (STCS, which is defined as PTMC abutment or a disrupted thyroid capsule), were compared between the two groups. Additionally, postoperative ultrasonography was performed to assess patients during the follow-up period. Results: Significant differences were observed in sex and the presence of STCS between the two groups (p < 0.05). The specificity and accuracy of the male sex for predicting CNLM were 86.21% (50/58 patients) and 64.08% (66/103 patients), respectively. The sensitivity, specificity, positive predictive value (PPV), and accuracy of STCS for predicting CNLM were 82.22% (37/45 patients), 70.69% (41/58 patients), 68.52% (37/54 patients), and 75.73% (78/103 patients), respectively. The specificity, PPV, and accuracy of the combination of sex and STCS for predicting CNLM were 96.55% (56/58 patients), 87.50% (14/16 patients), and 67.96% (70/103 patients), respectively. A total of 89 (86.4%) patients were followed up for a median of 4.6 years, with no patient having recurrence as detected on ultrasonography and pathological examination. Conclusions: STCS is a useful ultrasonographic feature for predicting CNLM in patients with solitary solid PTMC with a taller-than-wide shape, especially in male patients. Solitary solid PTMC with a taller-than-wide shape may have a good prognosis. [ABSTRACT FROM AUTHOR]

Antibiotic resistance (ABR) has direct and indirect repercussions on public health and threatens to decrease the therapeutic effect of antibiotic treatments and lead to more infection-related deaths. There are several mechanisms by which ABR can be transferred from one microorganism to another. The risk of transfer is often related to environmental factors. The food supply chain offers conditions where ABR gene transfer can occur by multiple pathways, which generates concerns regarding food safety. This work reviews mechanisms involved in ABR gene transfer, potential transmission routes in the food supply chain, the prevalence of antibiotic residues in food and ABR organisms in processing lines and final products, and implications for public health. Finally, the paper will elaborate on the application of antimicrobial peptides as new alternatives to antibiotics that might countermeasure ABR and is compatible with current food trends. [ABSTRACT FROM AUTHOR]

The use of visible-light-driven photocatalysts in wastewater treatment, photoreduction of CO2, green solar fuels, and solar cells has elicited substantial research attention. Bismuth oxyhalide and its derivatives are a group of visible-light photocatalysts that can diminish electron–hole recombination in layered structures and boost photocatalytic activity. The energy bandgap of these photocatalysts lies in the range of visible light. A simple hydrothermal method was applied to fabricate a series of bismuth oxychloride/bismuth oxyiodide/grafted graphitic carbon nitride (BiOmCln/BiOpIq/g-C3N4) sheets with different contents of g-C3N4. The fabricated sheets were characterized through XRD, TEM, SEM-EDS, XPS, UV-vis DRS, PL, and BET. The conversion efficiency of CO2 reduction to CH4 of BiOmCln/BiOpIq of 4.09 μmol g−1 can be increased to 39.43 μmol g−1 by compositing with g-C3N4. It had an approximately 9.64 times improvement. The photodegradation rate constant for crystal violet (CV) dye of BiOmCln/BiOpIq of k = 0.0684 can be increased to 0.2456 by compositing with g-C3N4. It had an approximately 3.6 times improvement. The electron paramagnetic resonance results and the quenching effects indicated that 1O2, •OH, h+, and •O2− were active species in the aforementioned photocatalytic degradation. Because of their heterojunction, the prepared ternary nanocomposites possessed the characteristics of a heterojunction of type II band alignment. [ABSTRACT FROM AUTHOR]

Background: Hepatocellular carcinoma (HCC) is one of the most common malignant tumors that lacks an efficient therapeutic approach because of its elusive molecular mechanisms. This study aimed to investigate the biological function and potential mechanism of formin-binding protein 4 (FNBP4) in HCC. Methods: FNBP4 expression in tissues and cells were detected by quantitative real-time PCR (qRT‒PCR), Western blot, and immunohistochemistry (IHC). The Kaplan-Meier method was used to explore the correlation between the FNBP4 expression and clinical survival. MTT, EdU incorporation, colony formation, and Transwell assays were performed to evaluate the function of FNBP4 in cell proliferation and migration in vitro. Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway analysis was used to explore the potential mechanism of FNBP4. The prognostic risk signature and nomogram were constructed to demonstrate the prognostic value of FNBP4. Results: We found that FNBP4 was upregulated in patients with HCC and associated with poor overall survival (OS). Furthermore, knockdown of FNBP4 inhibited the proliferation and migration in HCC cells. Then, we performed a KEGG pathway analysis of the coexpressed genes associated with FNBP4 and found that FNBP4 may be associated with tumor-related signaling pathways and cuproptosis. We verified that FNBP4 could cause cell cycle progression and inactivation of the hippo signaling pathway. A prognostic risk signature containing three FNBP4-related differentially expressed cuproptosis regulators (DECRs) was established and can be used as an independent risk factor to evaluate the prognosis of patients with HCC. In addition, a nomogram including a risk score and clinicopathological factors was used to predict patient survival probabilities. Conclusion: FNBP4, as a potential biomarker associated with cuproptosis, promotes HCC cell proliferation and metastasis. We provide a new potential strategy for HCC treatment by targeting FNBP4. [ABSTRACT FROM AUTHOR]

Lead halide perovskites show great potential to be used in wearable optoelectronics. However, obstacles for real applications lie in their instability under light, moisture and temperature stress, noxious lead ions leakage and difficulties in fabricating uniform luminescent textiles at large scale and high production rates. Overcoming these obstacles, we report simple, high-throughput electrospinning of large-area (> 375 cm2) flexible perovskite luminescent textiles woven by ultra-stable polymer@perovskite@cyclodextrin@silane composite fibers. These textiles exhibit bright and narrow-band photoluminescence (a photoluminescence quantum yield of 49.7%, full-width at half-maximum <17 nm) and the time to reach 50% photoluminescence of 14,193 h under ambient conditions, showcasing good stability against water immersion (> 3300 h), ultraviolet irradiation, high temperatures (up to 250 °C) and pressure surge (up to 30 MPa). The waterproof PLTs withstood fierce water scouring without any detectable leaching of lead ions. These low-cost and scalable woven PLTs enable breakthrough application in marine rescue. Instability of perovskites under light, moisture and temperature stress hinders their potential in real applications. Here Tian et al. demonstrate the high-throughput fabrication of large-area, flexible, color-tunable, waterproof and durable wearable luminescent textiles suitable for marine rescue. [ABSTRACT FROM AUTHOR]

Perovskite solar cells (PSCs) have witnessed an unprecedentedly rapid development, especially in terms of power conversion efficiency (PCE). However, the solution‐processed perovskite films inevitably possess numerous crystallographic defects (e.g., halide vacancies), which has been shown to incur non‐radiative charge recombination and ion migration, thus limiting the enhancement of the PCE and stability of PSCs. Here, a novel dual metal (i.e., divalent and monovalent metal ions) modification strategy is reported for simultaneously reducing the defects, immobilizing the halide anions, and preventing ion loss from perovskite during post‐annealing process. Accordingly, this strategy significantly reduces non‐radiative recombination, enhancing the PCE by ≈12% and mitigating the current density‐voltage (J–V) hysteresis effect in resultant devices compared to undoped counterparts. As a result, a champion PCE exceeding 22% and a high open‐circuit voltage (Voc) of 1.16 V is obtained for dual metal ions‐modified PSCs. The optimized devices also exhibit extended lifespan upon the dual metal treatment. The study provides a new defect engineering strategy toward more efficient and stable perovskite photovoltaics. [ABSTRACT FROM AUTHOR]

Liver cancer is one of the most common tumors with a high malignant degree in the world. Its diagnosis and treatment are very difficult and limited. More novel and powerful DAT strategies are urgently needed to break this situation. An increasing number of studies have shown that microRNAs (miRNAs) could be used not only as biomarkers for the diagnosis and prognosis of hepatocellular carcinoma (HCC) but also as important targets for molecular targeted therapy. However, the role of miR-550a-5p in HCC and its specific mechanism remain unclear. Here we proposed and verified the hypothesis that the miR-550a-5p could regulate the progression of HCC and was positively associated with poor prognosis. We found that decreased miR-550a-5p would inhibit the proliferation and migration of HCC cell lines (HCs) by performing relevant assays. Interestingly, knocking down GNE could reverse the above effect of miR-550a-5p on HCs. Meanwhile, the western blot results showed that the Wnt/ß-catenin signaling pathway was at least partly involved in the regulation of HCC by miR-550a-5p. In addition, we also found that miR-550a-5p could suppress the growth of HCC in vivo via a xenograft tumor model assay. All in all, we draw a conclusion that the miR-550a-5p/GNE axis functioned as an important role in promoting the progression of HCC via the Wnt/ß-catenin signaling pathway. [ABSTRACT FROM AUTHOR]

The present study demonstrated for the first time that SNORA70E, which belongs to box H/ACA small nucleolar noncoding RNAs (snoRNAs) who could bind and induce pseudouridylation of RNAs, was significantly elevated in ovarian cancer tissues and was an unfavourable prognostic factor of ovarian cancer. The over‐expression of SNORA70E showed increased cell proliferation, invasion and migration in vitro and induced tumour growth in vivo. Further research found that SNORA70E regulates RAS‐Related Protein 1B (RAP1B) mRNA through pseudouracil modification by combing with the pyrimidine synthase Dyskerin Pseudouridine Synthase 1 (DKC1) and increase RAP1B protein level. What's more, the silencing of DKC1/RAP1B in SNORA70E overexpression cells both inhibited cell proliferation, migration and invasion through reducing β‐catenin, PI3K, AKT1, mTOR, and MMP9 protein levels. Besides, RNA‐Seq results revealed that SNORA70E regulates the alternative splicing of PARP‐1 binding protein (PARPBP), leading to the 4th exon‐skipping in PARPBP‐88, forming a new transcript PARPBP‐15, which promoted cell invasion, migration and proliferation. Finally, ASO‐mediated silencing of SNORA70E could inhibit ovarian cancer cell proliferation, invasion, migration ability in vitro and inhibit tumorigenicity in vivo. In conclusion, SNORA70E promotes the occurrence and development of ovarian cancer through pseudouridylation modification of RAP1B and alternative splicing of PARPBP. Our results demonstrated that SNORA70E may be a new diagnostic and therapeutic target for ovarian cancer. [ABSTRACT FROM AUTHOR]

Tin‐based perovskite solar cells (Sn‐PSCs) have emerged as promising environmentally viable photovoltaic technologies, but still suffer from severe non‐radiative recombination loss due to the presence of abundant deep‐level defects in the perovskite film and under‐optimized carrier dynamics throughout the device. Herein, we healed the structural imperfections of Sn perovskites in an "inside‐out" manner by incorporating a new class of biocompatible chelating agent with multidentate claws, namely, 2‐Guanidinoacetic acid (GAA), which passivated a variety of deep‐level Sn‐related and I‐related defects, cooperatively reinforced the passivation efficacy, released the lattice strain, improved the structural toughness, and promoted the carrier transport of Sn perovskites. Encouragingly, an efficiency of 13.7 % with a small voltage deficit of ≈0.47 V has been achieved for the GAA‐modified Sn‐PSCs. GAA modification also extended the lifespan of Sn‐PSCs over 1200 hours. [ABSTRACT FROM AUTHOR]

Tin‐based perovskite solar cells (Sn‐PSCs) have emerged as promising environmentally viable photovoltaic technologies, but still suffer from severe non‐radiative recombination loss due to the presence of abundant deep‐level defects in the perovskite film and under‐optimized carrier dynamics throughout the device. Herein, we healed the structural imperfections of Sn perovskites in an "inside‐out" manner by incorporating a new class of biocompatible chelating agent with multidentate claws, namely, 2‐Guanidinoacetic acid (GAA), which passivated a variety of deep‐level Sn‐related and I‐related defects, cooperatively reinforced the passivation efficacy, released the lattice strain, improved the structural toughness, and promoted the carrier transport of Sn perovskites. Encouragingly, an efficiency of 13.7 % with a small voltage deficit of ≈0.47 V has been achieved for the GAA‐modified Sn‐PSCs. GAA modification also extended the lifespan of Sn‐PSCs over 1200 hours. [ABSTRACT FROM AUTHOR]

This study explores how parametric uncertainties in the production affect failure tensile loads of reinforced thermoplastic pipes (RTPs) under combined loading conditions. The stress distributions in RTPs are examined with three-dimensional (3D) elasticity theory, and the analytical micromechanics of composites are evaluated. To evaluate the failure mechanisms for RTPs, 3D Hashin—Yeh failure criteria are combined with the damage evolution model to establish a progressive failure model. The theoretical model has been validated through numerical simulations and axial tensile tests data. To analyze how randomness of relevant parameters affects the first-ply failure (FPF) tensile load and final failure (FF) tensile load in RTPs, many samples are produced with the Monte—Carlo approach. The stochastic analysis results are statistically evaluated through the Weibull probability density distribution function. For the randomness of production parameters, the failure tensile load of RTPs fluctuates near the mean value. As the ply number at the reinforced layer increases, the dispersion of failure tensile load increases, with a high probability that the FPF tensile load of RTPs is lower than the mean value. [ABSTRACT FROM AUTHOR]

Perovskite photovoltaics have witnessed overwhelming success over the past decade. Carbon‐based perovskite solar cells (C‐PSCs), using carbon materials as electrodes, make the perovskite photovoltaics more attractive than ever. Since its first launch in 2013, the development of state‐of‐the‐art C‐PSCs has made remarkable achievements in various aspects. Herein, the recent ground‐breaking advancement of C‐PSCs has been summarized, with a particular focus on highlighting the unique advantages of carbon electrodes that enable perovskite photovoltaics affordable, fully printable, and durable. Limitations and challenges associated with C‐PSCs are discussed. An insightful perspective regarding future research directions is provided, revolutionizing the pathway toward new‐generation photovoltaics and optoelectronics. [ABSTRACT FROM AUTHOR]

Room temperature‐processed electron transport layers (RT‐ETLs) demonstrate vast potential to be used in fabricating high‐performance flexible perovskite solar cells (PSCs) in an energy‐saving manner. However, the RT‐ETL normally suffers from inferior crystallinity, mismatched energy level, and high surface trap‐state density, which would result in under‐optimized interfacial electron extraction and undesirable interfacial charge recombination at ETL/perovskite interface, thus limiting the device performance. Herein, a novel strategy is demonstrated to prepare annealing‐free RT‐ETL based on precrystalline metal ion‐modified SnO2 nanocrystals, which perfectly optimizes the interfacial energy level alignment between ETL and perovskite layer, achieving nearly zero‐barrier charge transfer at the interface. As a result, the charge extraction has been remarkably accelerated and the interfacial charge recombination has been largely suppressed, leading to a ≈26% enhancement in device efficiency. The best‐performing flexible PSCs achieve efficiencies up to 19.3%, accompanied by outstanding mechanical strength under repeated bending cycle tests, which, to the best of the knowledge, is one of the highest reported values for the flexible perovskite photovoltaics fabricated with RT‐ETLs. [ABSTRACT FROM AUTHOR]

In order to explore the molecular mechanism of acute rejection after liver transplantation (ARLT) in rats, we employed the GSE36798 data set in the Gene Expression Omnibust (GEO) database to construct a related ceRNA network. This dataset contained a total of 16 samples (8 graft samples and 8 plasma samples). Each kind of sample was divided into acute rejection (AR) groups and non-acute rejection (NR) groups, and each group had 4 replicates. First, we performed principal component analysis (PCA) with downloaded data to compare the difference between samples in a macroscopic way. Then, we used the "limma" R package to screen out differentially expressed miRNAs among different groups and used the "pheatmap" R package to perform bidirectional hierarchical clustering analysis for these differentially expressed miRNAs. The miRWalk database and the LncBase V.2 database were applied to predict downstream target genes and upstream-related lncRNAs, respectively. Meanwhile, the String database was used to predict the relationship between target genes, and the aforementioned results were processed for visualization by Cytoscape software. In addition, we exhibited the ultimate ceRNA network, including two lncRNAs, two miRNAs, and 77 mRNAs. Finally, we constructed a rat model of ARLT and applied graft specimens to relevant experimental verification. We found that the lncRNA Snhg1/rno-miR-139-5p axis might be involved in the regulation of ARLT in rats. In short, we demonstrated the differentially expressed miRNA profile, constructed a related ceRNA network, and screened out a possible regulatory axis. In view of the conservation of genes among species, this work was expected to provide a new strategy for the treatment and prevention of ARLT in the clinical setting. [ABSTRACT FROM AUTHOR]

A new Ag(I) coordination complex, Ag(C11H10N2O)2·NO3 (C11H10N2O = 4-(2-hydroxyphenyl)-2-methylpyrimidine) is successfully synthesized and characterized by infrared spectroscopy, elemental analysis, and single-crystal X-ray diffraction analysis. This complex features a three-dimensional framework consisting of hydrogen bonds, π–π stacking interactions, coordination interactions, and electrostatic interactions. Moreover, the thermal stability and non-isothermal thermal decomposition reaction kinetics of the complex are well investigated by the methods of Kissinger and Ozawa. Finally, the antitumor ability of the complex is evaluated against human lung cancer cells (NCI-H460), human hepatocellular cancer cells (HepG2), and human breast cancer cells (MCF7). The complex exhibits potent antitumor activities against HepG2 and MCF7 cancer cells. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Central South University is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The sodium pump α3 subunit is associated with colorectal liver metastasis. However, the underlying mechanism involved in this effect is not yet known. In this study, we found that the expression levels of the sodium pump α3 subunit were positively associated with metastasis in colorectal cancer (CRC). Knockdown of the α3 subunit or inhibition of the sodium pump could significantly inhibit the migration of colorectal cancer cells, whereas overexpression of the α3 subunit promoted colorectal cancer cell migration. Mechanistically, the α3 subunit decreased p53 expression, which subsequently downregulated PTEN/IGFBP3 and activated mTOR, leading to the promotion of colorectal cancer cell metastasis. Reciprocally, knockdown of the α3 subunit or inhibition of the sodium pump dramatically blocked this effect in vitro and in vivo via the downregulation of mTOR activity. Furthermore, a positive correlation between α3 subunit expression and mTOR activity was observed in an aggressive CRC subtype. Conclusions: Elevated expression of the sodium pump α3 subunit promotes CRC liver metastasis via the PTEN/IGFBP3-mediated mTOR pathway, suggesting that sodium pump α3 could represent a critical prognostic marker and/or therapeutic target for this disease. [ABSTRACT FROM AUTHOR]

Background. Agro-industrial waste from tropical environments could be an important source of lactic acid bacteria (LAB) with probiotic potential. Methods. Twelve LAB isolates were isolated from pineapple silages. The species identification was carried out considering 16S rRNA and pheS genes. Experiments to evaluate the probiotic potential of the isolates included survival under simulated gastrointestinal environment, in vitro antagonistic activity (against Salmonella spp. and Listeria monocytogenes), auto-aggregation assays, antibiotic susceptibility, presence of plasmids, adhesiveness to epithelial cells, and antagonistic activity against Salmonella in HeLa cells. Results. Lacticaseibacillus paracasei, Lentilactobacillus parafarraginis, Limosilactobacillus fermentum, and Weissella ghanensis were identified. Survival of one of the isolates was 90% or higher after exposure to acidic conditions (pH: 2), six isolates showed at least 61% survival after exposure to bile salts. The three most promising isolates, based on survivability tests, showed a strong antagonistic effect against Salmonella. However, only L. paracasei_6714 showed a strong Listeria inhibition pattern; this isolate showed a good auto-aggregation ability, was resistant to some of the tested antibiotics but was not found to harbor plasmids; it also showed a high capacity for adhesion to epithelial cells and prevented the invasion of Salmonella in HeLa cells. After further in vivo evaluations, L. paracasei_6714 may be considered a probiotic candidate for food industry applications and may have promising performance in acidic products due to its origin. [ABSTRACT FROM AUTHOR]

Simplified perovskite solar cells (PSCs) were fabricated with the perovskite layer sandwiched and encapsulated between carbon‐based electron transport layer (ETL) and counter electrode (CE) by a fully blade‐coated process. A self‐assembled monolayer of amphiphilic silane (AS) molecules on transparent conducting oxide (TCO) substrate appeals to the fullerene ETL deposition and preserves its integrity against the solvent damage. The AS serves as a "molecular glue" to strengthen the adhesion toughness at the TCO/ETL interface via robust chemical interaction and bonding, facilitating the interfacial charge extraction, increasing PCEs by 77 % and reducing hysteresis. A PCE of 18.64 % was achieved for the fully printed devices, one of the highest reported for carbon‐based PSCs. AS‐assisted interfacial linkage and carbon‐material‐assisted self‐encapsulation enhance the stability of the PSCs, which did not experience performance degradation when stored at ambient conditions for over 3000 h. [ABSTRACT FROM AUTHOR]

Simplified perovskite solar cells (PSCs) were fabricated with the perovskite layer sandwiched and encapsulated between carbon‐based electron transport layer (ETL) and counter electrode (CE) by a fully blade‐coated process. A self‐assembled monolayer of amphiphilic silane (AS) molecules on transparent conducting oxide (TCO) substrate appeals to the fullerene ETL deposition and preserves its integrity against the solvent damage. The AS serves as a "molecular glue" to strengthen the adhesion toughness at the TCO/ETL interface via robust chemical interaction and bonding, facilitating the interfacial charge extraction, increasing PCEs by 77 % and reducing hysteresis. A PCE of 18.64 % was achieved for the fully printed devices, one of the highest reported for carbon‐based PSCs. AS‐assisted interfacial linkage and carbon‐material‐assisted self‐encapsulation enhance the stability of the PSCs, which did not experience performance degradation when stored at ambient conditions for over 3000 h. [ABSTRACT FROM AUTHOR]

Cancer cell dysregulations result in the abnormal regulation of cellular metabolic pathways. By simulating this metabolic reprogramming using constraint‐based modeling approaches, oncogenes can be predicted, and this knowledge can be used in prognosis and treatment. We introduced a trilevel optimization problem describing metabolic reprogramming for inferring oncogenes. First, this study used RNA‐Seq expression data of lung adenocarcinoma (LUAD) and lung squamous cell carcinoma (LUSC) samples and their healthy counterparts to reconstruct tissue‐specific genome‐scale metabolic models and subsequently build the flux distribution pattern that provided a measure for the oncogene inference optimization problem for determining tumorigenesis. The platform detected 45 genes for LUAD and 84 genes for LUSC that lead to tumorigenesis. A high level of differentially expressed genes was not an essential factor for determining tumorigenesis. The platform indicated that pyruvate kinase (PKM), a well‐known oncogene with a low level of differential gene expression in LUAD and LUSC, had the highest fitness among the predicted oncogenes based on computation. By contrast, pyruvate kinase L/R (PKLR), an isozyme of PKM, had a high level of differential gene expression in both cancers. Phosphatidylserine synthase 1 (PTDSS1), an oncogene in LUAD, was inferred to have a low level of differential gene expression, and overexpression could significantly reduce survival probability. According to the factor analysis, PTDSS1 characteristics were close to those of the template, but they were unobvious in LUSC. Angiotensin‐converting enzyme 2 (ACE2) has recently garnered widespread interest as the SARS‐CoV‐2 virus receptor. Moreover, we determined that ACE2 is an oncogene of LUSC but not of LUAD. The platform developed in this study can identify oncogenes with low levels of differential expression and be used to identify potential therapeutic targets for cancer treatment. [ABSTRACT FROM AUTHOR]