Search

Regioselective modifications of cellulose using activated cellulose derivatives such as 6‐halo‐6‐deoxycelluloses provide a convenient approach for developing sustainable products with properties tailored to specific applications. However, maintaining precise regiochemical control of substituent distribution in 6‐halo‐6‐deoxycelluloses is challenging due to their insolubility in most common solvents and the resulting difficulties in precise structure elucidation by modern instrumental analytical techniques. Herein, an accessible NMR‐based approach toward detailed characterization of 6‐halo‐6‐deoxycelluloses, including the determination of the degrees of substitution at carbon 6 (DS6), is presented. It is shown that the direct‐dissolution cellulose solvent, tetrabutylphosphonium acetate:DMSO‐d6, converts 6‐halo‐6‐deoxycelluloses to 6‐monoacetylcellulose, enabling in situ solution‐state NMR measurements. A range of 1D and 2D NMR experiments is used to demonstrate the quantitivity of the conversion and provide optimum dissolution conditions. In comparison with other NMR‐based derivatization protocols for elucidating the structure of 6‐halo‐6‐deoxycelluloses, the presented approach offers major advantages in terms of accuracy, speed, and simplicity of analysis, and minimal requirements for reagents or NMR instrumentation. [ABSTRACT FROM AUTHOR]

Liposome capillary electrokinetic chromatography was used to investigate the interactions between three β‐blockers of different hydrophobicity and various liposome solutions. The studied β‐blockers comprised alprenolol, propranolol, and carvedilol. The composition of the liposome solutions, containing 1‐palmitoyl‐2‐oleoyl‐sn‐glycero‐3‐phosphocholine, 1,2‐dioleoyl‐sn‐glycero‐3‐phos‐phoethanolamine, 1‐palmitoyl‐2‐oleoyl‐sn‐glycero‐3‐phospho‐l‐serine, and cholesterol in various molar ratios, was designed by a response surface methodology‐central composite design approach. Subsequently, after conducting the liposome capillary electrokinetic chromatography experiments and determining the retention factors from the electrophoretic mobilities of the compounds, and further calculating the distribution coefficients, an analysis of variance was performed. After extracting the statistical models, optimal operational conditions were obtained based on the developed models. To further investigate the interactions between the β‐blockers and the liposomes, nanoplasmonic sensing experiments were carried out on two different liposome systems. The overall results demonstrate the strong influence of cholesterol and 1‐palmitoyl‐2‐oleoyl‐sn‐glycero‐3‐phospho‐l‐serine on the distribution coefficients. [ABSTRACT FROM AUTHOR]

Oxidized compounds in the atmosphere can occur as emitted primary compounds or as secondary products when volatile emitted precursors react with various oxidants. Due to the presence of polar functional groups, their vapor pressures decrease, and they condense onto small particles. Thereby, they have an effect on climate change by the formation of clouds and scattering solar radiation. The particles and oxidized compounds themselves can cause serious health problems when inhaled. Therefore, it is of utmost importance to study oxidized compounds in the atmosphere. Much ongoing research is focused on the discovery of new oxidized substances and on the evaluation of their sources and factors influencing their formation. Monitoring biogenic and anthropogenic primary oxidized compounds or secondary oxidized products in chamber experiments or field campaigns is common. New discoveries have been reported, including various oxidized compounds and a new group of compounds called highly oxidized organic molecules (HOMs). Analytics of HOMs are mainly focused on chromatography and high-resolution mass spectrometry employing chemical ionization for identifying and quantifying compounds at low concentrations. Oxidized compounds can also be monitored by spectrophotometric methods in which the determinations of total amounts are based on functional groups. This review highlights recent findings on oxidized organic compounds in the atmosphere and analytical methodologies used for their detection and quantification. The discussion includes gas and liquid chromatographic methods, sampling, extraction, concentration, and derivatization procedures involved, as well as mass spectrometric and spectrophotometric methods. [ABSTRACT FROM AUTHOR]

A letter to the editor comments on a clinical study titled "Lipid emulsion therapy during the management of the critically-ill poisoned patient: a prospective cohort study." The study found that survival after lipid emulsion administration in patients intoxicated with various drugs is not correlated with drug lipophilicity. The letter argues that the study's use of the logarithm of the octanol/water partition coefficient (log P) as a measure of lipophilicity may not be accurate, and suggests that the logarithm of the distribution coefficient (log D) is a more reasonable descriptor. The letter also discusses the concept of a "lipid sink" and suggests that the increase in systolic blood pressure observed with lipid emulsion therapy may be due to a direct inhibitory effect on endothelial nitric oxide release. [Extracted from the article]

Amphiphilic diblock copolymers consisting of a hydrophobic core containing a polymerized ionic liquid and an outer shell composed of poly(N‐isoprolylacrylamide) were investigated by capillary electrophoresis and asymmetrical flow‐field flow fractionation. The polymerized ionic liquid comprised poly(2‐(1‐butylimidazolium‐3‐yl)ethyl methacrylate tetrafluoroborate) with a constant block length (n = 24), while the length of the poly(N‐isoprolylacrylamide) block varied (n = 14; 26; 59; 88). Possible adsorption of the block copolymer on the fused silica capillary, due to alterations in the polymeric conformation upon a change in the temperature (25 and 45 °C), was initially studied. For comparison, the effect of temperature on the copolymer conformation/hydrodynamic size was determined with the aid of asymmetrical flow‐field flow fractionation and light scattering. To get more information about the hydrophilic/hydrophobic properties of the synthesized block copolymers, they were used as a pseudostationary phase in electrokinetic chromatography for the separation of some model compounds, that is, benzoates and steroids. Of particular interest was to find out whether a change in the length or concentration of the poly(N‐isoprolylacrylamide) block would affect the separation of the model compounds. Overall, our results show that capillary electrophoresis and asymmetrical flow‐field flow fractionation are suitable methods for characterizing conformational changes of such diblock copolymers. [ABSTRACT FROM AUTHOR]

We introduce rapid replica molding of ordered, high-aspect-ratio, thiol-ene micropillar arrays for implementation of microfluidic immobilized enzyme reactors (IMERs). By exploiting the abundance of free surface thiols of off-stoichiometric thiol-ene compositions, we were able to functionalize the native thiol-ene micropillars with gold nanoparticles (GNPs) and these with proteolytic α-chymotrypsin (CHT) via thiol-gold interaction. The micropillar arrays were replicated via PDMS soft lithography, which facilitated thiol-ene curing without the photoinitiators, and thus straightforward bonding and good control over the surface chemistry (number of free surface thiols). The specificity of thiol-gold interaction was demonstrated over allyl-rich thiol-ene surfaces and the robustness of the CHT-IMERs at different flow rates and reaction temperatures using bradykinin hydrolysis as the model reaction. The product conversion rate was shown to increase as a function of decreasing flow rate (increasing residence time) and upon heating of the IMER to physiological temperature. Owing to the effective enzyme immobilization onto the micropillar array by GNPs, no further purification of the reaction solution was required prior to mass spectrometric detection of the bradykinin hydrolysis products and no clogging problems, commonly associated with conventional capillary packings, were observed. The activity of the IMER remained stable for at least 1.5 h (continuous use), suggesting that the developed protocol may provide a robust, new approach to implementation of IMER technology for proteomics research. Graphical abstract [ABSTRACT FROM AUTHOR]

This study aims at extending the understanding of the toxicity mechanism of ionic liquids (ILs) using various analytical methods and cytotoxicity assays. The cytotoxicity of eight ILs and one zwitterionic compound was determined using mammalian and bacterial cells. The time dependency of the IL toxicity was assessed using human corneal epithelial cells. Hemolysis was performed using human red blood cells and the results were compared with destabilization data of synthetic liposomes upon addition of ILs. The effect of the ILs on the size and zeta potential of liposomes revealed information on changes in the lipid bilayer. Differential scanning calorimetry was used to study the penetration of the ILs into the lipid bilayer. Pulsed field gradient nuclear magnetic resonance spectroscopy was used to determine whether the ILs occurred as unimers, micelles, or if they were bound to liposomes. The results show that the investigated ILs can be divided into three groups based on the cytotoxicity mechanism: cell wall disrupting ILs, ILs exerting toxicity through both cell wall penetration and metabolic alteration, and ILs affecting solely on cell metabolism. [ABSTRACT FROM AUTHOR]

Abstract: This study aims at extending the understanding of the toxicity mechanism of ionic liquids (ILs) using various analytical methods and cytotoxicity assays. The cytotoxicity of eight ILs and one zwitterionic compound was determined using mammalian and bacterial cells. The time dependency of the IL toxicity was assessed using human corneal epithelial cells. Hemolysis was performed using human red blood cells and the results were compared with destabilization data of synthetic liposomes upon addition of ILs. The effect of the ILs on the size and zeta potential of liposomes revealed information on changes in the lipid bilayer. Differential scanning calorimetry was used to study the penetration of the ILs into the lipid bilayer. Pulsed field gradient nuclear magnetic resonance spectroscopy was used to determine whether the ILs occurred as unimers, micelles, or if they were bound to liposomes. The results show that the investigated ILs can be divided into three groups based on the cytotoxicity mechanism: cell wall disrupting ILs, ILs exerting toxicity through both cell wall penetration and metabolic alteration, and ILs affecting solely on cell metabolism. [ABSTRACT FROM AUTHOR]

Ionic liquids are used to dewater a suspension of birch Kraft pulp cellulose nanofibrils (CNF) and as a medium for waterfree topochemical modification of the nanocellulose (a process denoted as "WtF-Nano"). Acetylation was applied as a model reaction to investigate the degree of modification and scope of effective ionic liquid structures. Little difference in reactivity was observed when water was removed, after introduction of an ionic liquid or molecular co-solvent. However, the viscoelastic properties of the CNF suspended in two ionic liquids show that the more basic, but non-dissolving ionic liquid, allows for better solvation of the CNF. Vibrio fischeri bacterial tests show that all ionic liquids in this study were harmless. Scanning electron microscopy and wide-angle X-ray scattering on regenerated samples show that the acetylated CNF is still in a fibrillar form. 1D and 2D NMR analyses, after direct dissolution in a novel ionic liquid electrolyte solution, indicate that both cellulose and residual xylan on the surface of the nanofibrils reacts to give acetate esters. [ABSTRACT FROM AUTHOR]

Gold nanoparticles ( GNPs) are popular colloidal substrates in various sensor, imaging, and nanomedicine applications. In separation science, they have raised some interest as a support for sample preparation. Reasons for their popularity are their low cost, ability for size-controlled synthesis with well-defined narrow nanoparticle size distributions, as well as straightforward surface functionalization by self-assembling (thiol-containing) molecules on the surface, which allows flexible introduction of functionalities for the selective capture of analytes. Most commonly, the method of first choice for size determination is dynamic light scattering ( DLS). However, DLS has some serious shortcomings, and results from DLS may be misleading. For this reason, in this contribution several distinct complementary nanoparticle sizing methodologies were utilized and compared to characterize citrate-capped GNPs of different diameters in the range of 13-26 nm. Weaknesses and strengths of DLS, transmission electron microscopy, asymmetrical-flow field-flow fractionation and nanoelectrospray gas-phase electrophoretic mobility molecular analysis are discussed and the results comparatively assessed. Furthermore, the distinct GNPs were characterized by measuring their zeta-potential and surface plasmon resonance spectra. Overall, the combination of methods for GNP characterization gives a more realistic and comprehensive picture of their real physicochemical properties, (hydrodynamic) diameter, and size distribution. [ABSTRACT FROM AUTHOR]

CE has matured into a well-known and much used separation technique, with applications covering more or less all types of samples. EKC, which originally was developed for the separation of uncharged compounds, is still today under much development, with main focus on finding the perfect or ideal carriers (pseudo-stationary phase) for a broad range of analytes. In this review, the use of lipid dispersions as pseudostationary phases in EKC performed in capillaries and microchips, in addition to CE frontal analysis and partial filling EKC using lipid dispersions is discussed. Various types of lipid dispersions including liposomes, PEG-stabilized aggregates, proteoliposomes, lipid-based nanoparticles, and commercial lipid emulsions are described. The purpose of the review is to give the reader an overview of how EKC, CE frontal analysis, and partial filling EKC, have been applied to the study of interactions between analytes and lipid membranes. [ABSTRACT FROM AUTHOR]

Intravenous lipid emulsion is a recommended treatment for local anesthetic intoxication. The lipid sink theory hypothesizes that the mechanism behind the lipid treatment is the entrapment of toxic drugs in plasma, preventing them from reaching target receptors. Lipid sink treatment has also been used as a last refuge treatment for severe tricyclic antidepressant intoxication with seemingly beneficial results. We selected three drugs, i.e. amiodarone, ketamine, and amitriptyline, that can cause severe intoxication and compared their interactions with two commercial fat emulsions (Intralipid® and ClinOleic®) and one synthetic liposome (80:20 mol% phosphatidylcholine/phosphatidylglycerol) dispersion. The interaction studies were carried out by capillary electrokinetic chromatography and the retention factors and distributions constants of the drugs were calculated. The results demonstrate that there is stronger interaction between the drugs and the synthetic liposome dispersion than with the commercial emulsions. [ABSTRACT FROM AUTHOR]

Lipidomics is an emerging field of science not only due to its integral part of cell biology and biophysics but also due to the key role of lipids in the modulation of membrane physical properties, signaling, and cell death regulation. The aim of this study was to characterize changes in N-palmitoyl ceramide concentration and in the global lipid profile in macrophages challenged by oxidized low-density lipoprotein and nutrient deprived hepatocytes. For this purpose, a quantitative targeted method based on gas chromatography-mass spectrometry for the determination of total N-palmitoyl ceramide concentrations in the cellular membranes of cells under stress was used. Ultrahigh-performance liquid chromatography-quadrupole-time of flight mass spectrometry was applied for the comprehensive profiling of lipids. In essence, we found that both models of cellular stress caused an increase in N-palmitoyl ceramide levels. In addition, increased levels of other ceramides were observed as well as up- and down-regulation of several other lipid species. [ABSTRACT FROM AUTHOR]

Knowledge of the spatial distribution of lipids in the intraocular lens is important for understanding the physiology and biochemistry of this unique tissue and for gaining a better insight into the mechanisms underlying diseases of the lens. Following our previous study showing the spatial distribution of sphingolipids in the porcine lens, the current study used ultra performance liquid chromatography quadrupole time-of-flight mass spectrometry (UPLC-QTOFMS) to provide the whole lipidome of porcine lens and these studies were supplemented by matrix-assisted laser desorption ionization mass spectrometry imaging (MALDI MSI) of the lens using ultra-high resolution Fourier transform ion cyclotron resonance mass spectrometry (FTICR MS) to determine the spatial distribution of glycerophospholipids. Altogether 172 lipid species were identified with high confidence and their concentration was determined. Sphingomyelins, phosphatidylcholines, and phosphatidylethanolamines were the most abundant lipid classes. We then determined the spatial and concentration-dependent distributions of 20 phosphatidylcholines, 6 phosphatidylethanolamines, and 4 phosphatidic acids. Based on the planar molecular images of the lipids, we report the organization of fiber cell membranes within the ocular lens and suggest roles for these lipids in normal and diseased lenses. [ABSTRACT FROM AUTHOR]

Interactions between Intralipid dispersion and local anesthetics (bupivacaine, prilocaine, and lidocaine) were investigated. The amount of bupivacaine (the most cardiotoxic analyte of the local anesthetics studied) entrapped in Intralipid in the presence of plasma was studied using an off-line filtration and solid phase extraction method combined with capillary zone electrophoresis for quantification of free unbound bupivacaine. To confirm interactions between the analytes and Intralipid at lower concentrations, direct injection mass spectrometry was used. The use of immobilized Intralipid chromatography-atmospheric pressure ionization–ion trap mass spectrometry in the study of interactions between drugs and Intralipid dispersion is demonstrated. Finally, interactions between Intralipid dispersion and local anesthetics were investigated by electrokinetic capillary chromatography. The electrophoretic mobility of the Intralipid dispersed phase was calculated using the iterative procedure and a homologous series of alkyl phenyl benzoates (C1–C6), and the retention factors for the analytes were determined. [ABSTRACT FROM AUTHOR]

Large unilamellar vesicles of egg-phosphatidylcholine (eggPC), a naturally occurring phospholipid, were used in capillary electrophoresis (CE) for semi-permanent coating of fused silica capillaries. The stability of the phospholipid coating was tested at different cetyltrimethylammonium bromide (CTAB) concentrations with and without CaCl2 present in the coating solution. The effect of physical factors influencing the coating stability (e.g. duration of the coating time, storage temperature of the coating solution) were also studied. Standing overnight in background electrolyte (BGE) solution did not alter the eggPC phospholipid coating noticeably. The performance of the coating was tested with a mixture of basic proteins (lysozyme, ribonuclease A and a-chymotrypsinogen A). Highest efficiencies (over 200,000 plates m-1) were achieved when the capillary was filled for 15 h with a liposome solution containing both CTAB and CaCl2. [ABSTRACT FROM AUTHOR]

The effect of calcium on phospholipid coatings in fused silica capillaries used in capillary electrophoresis was studied. The anionic liposomes used for the coating consisted of 3 mM 1-palmitoyl-2-oleyl-sn-glycero-3-phosphatidylcholine and phosphatidylserine in the ratio 80/20 mol%. Coating was performed as part of the preconditioning, and the capillaries could be used for several runs without the need for liposomes in the background electrolyte solution or for liposome rinses between runs. Phospholipids could easily be flushed away by rinsing with a chloroform-methanol (2:1 v/v) mixture, which made it possible to recoat and reuse the capillaries. A calcium:phospholipid ratio of approximately 3 gave the most stable coating. The stability of the coating and success of the coating procedure were studied by measuring the electroosmotic flow and by separating uncharged steroids, which were used as model compounds. Many parameters that affect the coating, such as preconditioning (with different acids and bases), buffer, temperature during coating, and the physical structures of liposomes, were studied, with and without calcium in the liposome solution. The separation of steroids was improved and was less dependent on coating conditions when calcium was present during the coating. Capillaries optimally coated with anionic phospholipids were applied in the separation of phenols. [ABSTRACT FROM AUTHOR]

The iridoid glycosides, methyl catalpol, asperuloside, verbenalin, cinnamoyl catalpol, catalpol and aucubin, were studied from both larvae and adults of butterfly Melitaea cinxia. Special emphasis in the study was put on finding a correlation between the iridoid glycoside content in butterflies and plants. An optimised partial filling micellar electrokinetic capillary chromatographic–electrospray ionisation mass spectrometric (PF-MECC-ESI-MS) method was employed for the separation and identification of the six iridoid glycosides. In this work, the isolation and determination of catalpol and aucubin from extracts of both larvae and adults of Melitaea cinxia butterflies is demonstrated. The PF-MECC-ESI-MS method, using the [M+Na]+, [M+Li]+ and/or [M+NH4]+ adducts in ESI-MS, was used for quantification of aucubin and catalpol in the insects. In addition, the identification of all analytes was attempted by direct infusion MS/MS analysis. LOQ values for the iridoid glycosides varied between 10 mg/l (for verbenalin) to 50 mg/l (for catalpol and aucubin) corresponding to 0.1% of the samplés dry mass. A correlation was noticed between the concentrations of iridoid glycosides in plants and the concentrations in larvae feeding on them. [ABSTRACT FROM AUTHOR]

Offers a look at the potential of capillary electrophoresis (CE) with micelles or chiral selectors for the determination of drug related impurities. Advantages of CE over high performance liquid chromatography; Determination of chiral reagent purity; Application of CE in the purity quality control of pharmaceuticals.

Understanding the toxicity of ionic liquids (ILs) is crucial in the search of greener chemicals. By comparing in vivo toxicity and in vitro interactions determined between compounds and biomimetic lipid membranes, more detailed toxicity vs. structure relation can be obtained. However, determining the interactions between non-surface-active compounds and liposomes has been a challenging task. Organisational changes induced by ILs and IL-like spirocyclic compounds within 1,6-diphenyl-1,3,5-hexatriene-doped biomimetic liposomes was studied by steady-state fluorescence anisotropy technique. The extent of organisational changes detected within the liposome bilayers were compared to the toxicity of the compounds determined using Vibrio Fischeri bacteria. Four liposome compositions made of pure 1-palmitoyl-2-oleyl-sn-glycero-3-phosphocoline (POPC) and mixtures of POPC, 1-palmitoyl-2-oleyl-sn-glycero-3-phosphoserine (POPS), and cholesterol (Chol) were tested as biomimetic models. Changes observed within the POPC/POPS/Chol 55:20:25 bilayers correlated the best with the toxicity results: ten out of twelve compounds followed the trend of increasing bilayer disorder – increasing toxicity. The study suggests that the toxicity of non-surface-active compounds is dependent on their ability to diffuse into the bilayers. The extent of bilayer's organisational changes correlates rather well with the toxicity of the compounds. Highly sensitive technique, such as fluorescence anisotropy measurements, is needed for detecting subtle changes within the bilayer structures. [ABSTRACT FROM AUTHOR]

7-Methyl-1,5,7-triazabicyclo[4.4.0]dec-5-ene (mTBD) has useful catalytic properties and can form an ionic liquid when mixed with an acid. Despite its potential usefulness, no data on its thermodynamic and transport properties are currently available in the literature. Here we present the first reliable public data on the liquid vapor pressure (temperature from 318.23 K to 451.2 K and pressure from 11.1 Pa to 10 000 Pa), liquid compressed density (293.15 K to 473.15 K and 0.092 MPa to 15.788 MPa), liquid isobaric heat capacity (312.48 K to 391.50 K), melting properties, liquid thermal conductivity (299.0 K to 372.9 K), liquid refractive index (293.15 K to 343.15 K), liquid viscosity (290.79 K to 363.00 K), liquid–vapor enthalpy of vaporization (318.23 K to 451.2 K), liquid thermal expansion coefficient (293.15 K to 473.15 K), and liquid isothermal compressibility of mTBD (293.15 K to 473.15). The properties of mTBD were compared with those of other relevant compounds, including 1,5-diazabicyclo(4.3.0)non-5-ene (DBN), 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU), and 1,1,3,3-tetramethylguanidine (TMG). We used the PC-SAFT equation of state to model the thermodynamic properties of mTBD, DBN, DBU, and TMG. The PC-SAFT parameters were optimized using experimental data. [ABSTRACT FROM AUTHOR]

Immobilization of drug metabolizing enzymes on solid supports improves prediction of drug‐drug interactions by enabling enzyme inhibition assays under flow conditions. In article number 1800245, Tiina M. Sikanen and co‐workers use fusogenic liposomes for biotinylation of lipid bilayers to facilitate immobilization of the membrane‐bound cytochrome P450s on avidin‐functionalized microfluidic devices. Preservation of the full complexity of the lipid environment ensures that the authentic enzyme kinetic parameters can be maintained. [ABSTRACT FROM AUTHOR]

This work describes a new nanotechnology‐based immobilization strategy for cytochrome P450s (CYPs), the major class of drug metabolizing enzymes. Immobilization of CYPs on solid supports provides a significant leap forward compared with soluble enzyme assays by enabling the implementation of through‐flow microreactors for, for example, determination of time‐dependent inhibition. Immobilization of the complex CYP membrane‐protein system is however particularly challenging as the preservation of the authentic enzyme kinetic parameters requires the full complexity of the lipid environment. The developed strategy is based on the spontaneous fusion of biotinylated fusogenic liposomes with lipid bilayers to facilitate the gentle biotinylation of human liver microsomes that incorporate all main natural CYP isoforms. The same process is also feasible for the biotinylation of recombinant CYPs expressed in insect cells, same as any membrane‐bound enzymes in principle. As a result, CYPs could be immobilized on streptavidin‐functionalized surfaces, both those of commercial magnetic beads and customized microfluidic arrays, so that the enzyme kinetic parameters remain unchanged, unlike in previously reported immobilization approaches that often suffer from restricted substrate diffusion to the enzyme's active site and steric hindrances. The specificity and robustness of the functionalization method of customized microfluidic CYP assays are also carefully examined. Immobilization of membrane‐bound enzymes, such as the drug‐metabolizing cytochromes P450 (CYPs), is facilitated by a novel, nanotechnology‐inspired immobilization method utilizing membrane biotinylation via customized fusogenic liposomes. Unlike in previously reported immobilization approaches, the kinetic characteristics of CYPs remain unchanged using the developed method. [ABSTRACT FROM AUTHOR]

Our study demonstrates that nanoplasmonic sensing (NPS) can be utilized for the determination of the phase transition temperature (Tm) of phospholipids. During the phase transition, the lipid bilayer undergoes a conformational change. Therefore, it is presumed that the Tm of phospholipids can be determined by detecting conformational changes in liposomes. The studied lipids included 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC), and 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC). Liposomes in gel phase are immobilized onto silicon dioxide sensors and the sensor cell temperature is increased until passing the Tm of the lipid. The results show that, when the system temperature approaches the Tm, a drop of the NPS signal is observed. The breakpoints in the temperatures are 22.5 °C, 41.0 °C, and 55.5 °C for DMPC, DPPC, and DSPC, respectively. These values are very close to the theoretical Tm values, i.e., 24 °C, 41.4 °C, and 55 °C for DMPC, DPPC, and DSPC, respectively. Our studies prove that the NPS methodology is a simple and valuable tool for the determination of the Tm of phospholipids. [ABSTRACT FROM AUTHOR]