Search

Artificial intelligence (AI) models have received considerable attention in recent years for their ability to identify optical coherence tomography (OCT) biomarkers with clinical diagnostic potential and predict disease progression. This study aims to externally validate a deep learning (DL) algorithm by comparing its segmentation of retinal layers and fluid with a gold-standard method for manually adjusting the automatic segmentation of the Heidelberg Spectralis HRA + OCT software Version 6.16.8.0. A total of sixty OCT images of healthy subjects and patients with intermediate and exudative age-related macular degeneration (AMD) were included. A quantitative analysis of the retinal thickness and fluid area was performed, and the discrepancy between these methods was investigated. The results showed a moderate-to-strong correlation between the metrics extracted by both software types, in all the groups, and an overall near-perfect area overlap was observed, except for in the inner segment ellipsoid (ISE) layer. The DL system detected a significant difference in the outer retinal thickness across disease stages and accurately identified fluid in exudative cases. In more diseased eyes, there was significantly more disagreement between these methods. This DL system appears to be a reliable method for accessing important OCT biomarkers in AMD. However, further accuracy testing should be conducted to confirm its validity in real-world settings to ultimately aid ophthalmologists in OCT imaging management and guide timely treatment approaches. [ABSTRACT FROM AUTHOR]

Copyright of Revista Foco (Interdisciplinary Studies Journal) is the property of Revista Foco and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Lanthanum ferrites present electrical and magnetic properties that enable their use in several areas. Specifically, lanthanum ferrites doped with cobalt and strontium have electrical conductivity and thermal stability, which enable their use as electrodes (cathode) in solid oxide fuel cells and as catalysts in oxygen separation membranes. This study aimed to investigate the effect of the fuel concentration and calcination temperature over the synthesis of La0,6Sr0,4Co0,8Fe0,2O3 nanopowders through solution combustion synthesis (SCS) using sucrose (C12H22O11) as fuel. Therefore, the powder was obtained using oxidant and reductant reagents in a stoichiometric amount (1:1) and with an excess of reducing reagent in the composition (1:2) and thermal treatment in several temperature ranges, 1100 and 1200 °C, was performed. As a result, the samples calcined at 1200 °C showed the best structural characteristics concerning the other temperatures used, with an average crystallite size of 37 nm for the 1:1 sample and 42 nm for the 1:2 sample. The conductivity of the materials tends to increase with increasing temperature and excess of fuel. At 500 °C, in the 1:1 sample, 2.61 × 10−4 S/cm was obtained and in the 1:2 sample, 11.4 × 10−4 S/cm. Given the findings obtained in this work report, the fuel excess increases crystallite size and conductivity and reduces band gap and activation energy, emphasizing a considerable influence of the content of fuel used in SCS in the evaluated properties. [ABSTRACT FROM AUTHOR]

Pressure injuries (PIs) are a major public health problem and can be used as quality-of-care indicators. An incipient development in the field of medical devices takes the form of Smart Health Textiles, which can possess innovative properties such as thermoregulation, sensing, and antibacterial control. This protocol aims to describe the process for the development of a new type of smart clothing for individuals with reduced mobility and/or who are bedridden in order to prevent PIs. This paper's main purpose is to present the eight phases of the project, each consisting of tasks in specific phases: (i) product and process requirements and specifications; (ii and iii) study of the fibrous structure technology, textiles, and design; (iv and v) investigation of the sensor technology with respect to pressure, temperature, humidity, and bioactive properties; (vi and vii) production layout and adaptations in the manufacturing process; (viii) clinical trial. This project will introduce a new structural system and design for smart clothing to prevent PIs. New materials and architectures will be studied that provide better pressure relief, thermo-physiological control of the cutaneous microclimate, and personalisation of care. [ABSTRACT FROM AUTHOR]

The work presents the synthesis and characterization of zinc oxide (ZnO) nanoparticles obtained by the starch-assisted sol-gel route. To observe the influence of the botanical source on the final properties of the nanoparticles, corn, and potato starches were used. After calcination (500°C/2h), the resulting material was analyzed by X-ray Diffraction (XRD) and Fourier-Transform Infrared Spectroscopy (FTIR) to confirm the formation of ZnO. The crystallite size was calculated by two methods, Scherrer and Williamson-Hall. Using the Scherrer method, ZnO nanopowders have been found with 26 nm and 23 nm sizes using corn and potato starches, respectively. By the Williamson-Hall method, the sizes were found 22 nm and 14 nm, using corn and potato starches, respectively. The band gap energies (Eg) were estimated from Diffuse Reflectance Spectroscopy, using the Tauc method (~3.05 to 3.08 eV) and the effective mass model (~3.36 to 3.38 eV). In every case and independently of the method adopted for calculating the crystallite size, the Eg values tend to decrease as the crystallite size increases, which could be associated with the difference in the type of starch used for the synthesis of ZnO. Based on these results, it can be inferred that the type of botanical source used as starch plays a role in the crystallite size, as well as in their optical properties. Therefore, ZnO nanopowders can be obtained by an ecological and low-cost sol-gel route, using starch from botanical sources. [ABSTRACT FROM AUTHOR]

Purpose : This study aims to investigate retinal and choroidal vascular reactivity to carbogen in central serous chorioretinopathy (CSC) patients. Methods: An experimental pilot study including 68 eyes from 20 CSC patients and 14 age and sex-matched controls was performed. The participants inhaled carbogen (5% CO2 + 95% O2) for 2 min through a high-concentration disposable mask. A 30° disc-centered fundus imaging using infra-red (IR) and macular spectral domain optical coherence tomography (SD-OCT) using the enhanced depth imaging (EDI) technique was performed, both at baseline and after a 2-min gas exposure. A parametric model fitting-based approach for automatic retinal blood vessel caliber estimation was used to assess the mean variation in both arterial and venous vasculature. Choroidal thickness was measured in two different ways: the subfoveal choroidal thickness (SFCT) was calculated using a manual caliper and the mean central choroidal thickness (MCCT) was assessed using an automatic software. Results: No significant differences were detected in baseline hemodynamic parameters between both groups. A significant positive correlation was found between the participants' age and arterial diameter variation (p < 0.001, r = 0.447), meaning that younger participants presented a more vasoconstrictive response (negative variation) than older ones. No significant differences were detected in the vasoreactive response between CSC and controls for both arterial and venous vessels (p = 0.63 and p = 0.85, respectively). Although the vascular reactivity was not related to the activity of CSC, it was related to the time of disease, for both the arterial (p = 0.02, r = 0.381) and venous (p = 0.001, r = 0.530) beds. SFCT and MCCT were highly correlated (r = 0.830, p < 0.001). Both SFCT and MCCT significantly increased in CSC patients (p < 0.001 and p < 0.001) but not in controls (p = 0.059 and 0.247). A significant negative correlation between CSC patients' age and MCCT variation (r = − 0.340, p = 0.049) was detected. In CSC patients, the choroidal thickness variation was not related to the activity state, time of disease, or previous photodynamic treatment. Conclusion: Vasoreactivity to carbogen was similar in the retinal vessels but significantly higher in the choroidal vessels of CSC patients when compared to controls, strengthening the hypothesis of a choroidal regulation dysfunction in this pathology. [ABSTRACT FROM AUTHOR]

Copyright of Brazilian Journal of Surgery & Clinical Research is the property of Master Editora and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Essential oils (EOs) are complex mixtures of volatile compounds extracted from different parts of plants by different methods. There is a large diversity of these natural substances with varying properties that lead to their common use in several areas. The agrochemical, pharmaceutical, medical, food, and textile industry, as well as cosmetic and hygiene applications are some of the areas where EOs are widely included. To overcome the limitation of EOs being highly volatile and reactive, microencapsulation has become one of the preferred methods to retain and control these compounds. This review explores the techniques for extracting essential oils from aromatic plant matter. Microencapsulation strategies and the available technologies are also reviewed, along with an in-depth overview of the current research and application of microencapsulated EOs. [ABSTRACT FROM AUTHOR]

Environmentally friendly alternatives have become sought after upon the development of scientific research and industrial processes. Recent trends suggest biodegradable polymers as the most promising solution for synthetic microcapsule systems. Safety, efficiency, biocompatibility, and biodegradability are some of the properties that biodegradable systems in microencapsulation can provide for a broad spectrum of applications. The controlled release of encapsulated active agents is a research field that, over the years, has been constantly innovating due to the promising applications in the areas of pharmaceutical, cosmetic, textile industry, among others. This article presents an overview of different polymers with potential for microcapsule synthesis, namely, biodegradable polymers. First, natural polymers are discussed, which are divided into two categories: polysaccharide-based polymers (cellulose, starch, chitosan, and alginate) and protein polymers (gelatin). Second, synthetic polymers are described, where biodegradable polymers such as polyesters, polyamides, among others appear as examples. For each polymer, this review presents its origin, relevant properties, applications, and examples found in the literature regarding its use in biodegradable microencapsulation systems. [ABSTRACT FROM AUTHOR]

Copyright of Brazilian Journal of Surgery & Clinical Research is the property of Master Editora and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Revista Turismo & Desenvolvimento (RT&D) / Journal of Tourism & Development is the property of Associacao de Gestao e Planeamento em Turismo da Universidade de Aveiro (AGPTUA) and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The use of drug delivery systems is a good technique to leave the right quantity of medicine in the patient's body in a suitable dose, because the drug application is delivered directly to the affected region. The current techniques such as HPLC and UV–Vis for the drug delivery calculation has some disadvantages, as the accuracy and the loss of the sample after characterization. With the aim of reducing the amount of material used during the characterization and have a non-destructive test with instantaneous results, the present paper shows the possibility of using electrochemical impedance spectroscopy (EIS) to have a drug delivery measurement during the release phenomena for a calcium phosphate cement (CFC) delivery system with gentamicin sulfate (GS) and lidocaine hydrochloride (LH), at a ratio of 1% and 2%, respectively. The equivalent circuit and the chemical mechanism involved during the measurements have been proposed as a tool to determine the drug delivery profile. The method has been compared with the UV–Vis technique. XRD was realized to verify conditions, before and after release. It was possible to verify the potential for using EIS as an instant technique to quantify drug delivery. [ABSTRACT FROM AUTHOR]

Developments aimed at expanding knowledge in the health area make it possible to increase human life expectancy. Calcium phosphate cement is a good option as a carrier for drug delivery systems because it is possible to achieve biocompatibility and adequate porosity in the same material. Utilization of this ceramic matrix is necessary to control the drug dosage released during contact between the bioceramic and host organism, and to promote bone regeneration. The techniques currently used to calculate the amount of drug released from the calcium phosphate cement in a drug delivery test have some drawbacks, such as limited sensitivity and loss of sample during measurements. Considering the reduction of the amount of sample used to determine the percentage of drug released and the use of a non-destructive technique with high sensitivity, the proposed work uses electrochemical impedance spectroscopy as a method to determine the phenomenon of interaction between the drug and the matrix. The matrix immersed on the phosphate buffer solution (PBS) is calcium phosphate cement with 1% of lidocaine hydrochloride. The results show changes in the R(RQ)(RQ)(RQ) equivalent circuit values obtained by the Nyquist diagrams of the samples that had their resistance values elevated due to the interaction between the drug and PBS/calcium phosphate cement, which causes correlation between the drug released presented on the PBS and variation in the electrical properties of the system. [ABSTRACT FROM AUTHOR]

In recent years, there has been increasing consumer interest in carotenoids, particularly of marine sustainable origin with applications in the food, cosmeceutical, nutritional supplement and pharmaceutical industries. For instance, microalgae belonging to the genus Tetraselmis are known for their biotechnologically relevant carotenoid profile. The recently isolated marine microalgal strain Tetraselmis sp. CTP4 is a fast-growing, robust industrial strain, which has successfully been produced in 100-m3 photobioreactors. However, there are no reports on total carotenoid contents from this strain belonging to T. striata/convolutae clade. Although there are several reports on extraction methods targeting chlorophytes, extraction depends on the strength of cell coverings, solvent polarity and the nature of the targeted carotenoids. Therefore, this article evaluates different extraction methods targeting Tetraselmis sp. CTP4, a strain known to contain a mechanically resistant theca. Here, we propose a factorial experimental design to compare extraction of total carotenoids from wet and freeze-dried microalgal biomass using four different solvents (acetone, ethanol, methanol or tetrahydrofuran) in combination with two types of mechanical cell disruption (glass beads or dispersion). The extraction efficiency of the methods was assessed by pigment contents and profiles present in the extracts. Extraction of wet biomass by means of glass bead-assisted cell disruption using tetrahydrofuran yielded the highest amounts of lutein and β-carotene (622 ± 40 and 618 ± 32 µg g−1 DW, respectively). Although acetone was slightly less efficient than tetrahydrofuran, it is preferable due to its lower costs and toxicity. [ABSTRACT FROM AUTHOR]

The increasing use of rare earth elements (REEs) in diverse technological applications has augmented the demand and exploitation of these worldwide, leading to a higher input of REEs + Yttrium (Y) in the marine environment. The present study investigated the ecotoxicity of Lanthanum (La) and Y to Mytilus galloprovincialis developing embryos and juveniles. This was achieved by quantifying the embryogenesis success after 48 h, and survival of juveniles after 96 h of exposure to different concentrations of La and Y. Results show that both La and Y are more toxic to developing embryos and larvae than to juveniles of M. galloprovincialis. Predicted no-effect concentration (PNEC) values were also derived for the embryo development as a preliminary approach to assess the environmental risk for these compounds to marine organisms. Results revealed that La is more toxic than Y. The high sensitivity of the early developmental stages to these compounds highlight the relevance of including these stages when evaluating the toxicity of chemicals where little information is available. Although older life stages may be more tolerant to toxicants, the population survival will be compromised if new recruits are not viable, with implications to the whole ecosystem health and functioning of the impacted area. Information on the ecotoxicity of chemicals with expanded technological use and that may be released during deep-sea mining activities is urgent in order to help estimate environmental impacts. [ABSTRACT FROM AUTHOR]

Effects of copper oxide nanoparticles (CuO NPs) were investigated in the midgut and fat body of Galleria mellonella. Fourth instar larvae were exposed to 10 µg Cu/L of CuO until becoming last instar larvae, and catalase (CAT), superoxide dismutase (SOD), glutathione peroxidase (GPx), glutathione-s-transferase (GST) and acetylcholinesterase (AChE) and metal accumulation were evaluated. Copper accumulation was observed in midgut and fat body tissues of G. mellonella larvae exposed to CuO NPs. CuO NPs increased CAT activities in midgut and fat body, while SOD activities were decreased. CuO NPs exhibited significant increases in GST activity in fat body, while no significant differences were observed in the midgut of G. mellonella larvae. AChE activity significantly decreased in the midgut of G. mellonella whereas there is no significant effect on fat body in CuO NPs exposed larvae. In overall, these findings demonstrate that tissue accumulation and oxidative stress that is countered by antioxidant enzymes occur when G. mellonella larvae exposed to environmental concentration of CuO nanoparticles. [ABSTRACT FROM AUTHOR]

Copyright of Análise Psicológica is the property of Instituto Superior de Psicologia Aplicada and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The reaction of the hexadentate dianionic 1,4,8,11-tetraazacyclotetradecane-based bis(phenolate) ligand, (tBu2ArO)2Me2-cyclam2−, with [SmI2(thf)2] in thf resulted in the formation of the divalent samarium complex [Sm(κ6-{(tBu2ArO)2Me2-cyclam})] (1). X-ray diffraction studies revealed that after recrystallization from n-hexane/thf complex 1 has a monomeric structure and does not contain thf molecules coordinated to the Sm(ii) center. However, UV-vis and 1H NMR spectroscopy of 1 evidenced the formation of thf-solvated complexes in neat thf. Reductive studies show that complex 1 can act as a single electron-transfer reagent and form well-defined Sm(iii) species. The reaction of 1 with several substrates, namely, TlBPh4, pyridine N-oxide, OPPh3, SPPh3 and bipyridines, are reported. Spectroscopy studies, including NMR, and single crystal X-ray diffraction data are in agreement with the formation of cationic Sm(iii) species, monochalcogenide bridged Sm(iii) complexes and Sm(iii) complexes with bipyridine radical ligand, respectively. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Nursing UFPE / Revista de Enfermagem UFPE is the property of Revista de Enfermagem UFPE and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The present work integrates the active biomonitoring (ABM) concept in mussels Mytilus galloprovincialis from the South coast of Portugal transplanted during 28 days between two sites with different sources of contamination, and vice versa, in order to assess biological effects in these mussels. For that purpose a multibiomarker approach was used. The suit of biomarkers indicative of metal contamination were metallothioneins (MT) and the enzyme δ-aminolevulinic acid dehydratase (ALAD), for organic contamination mixed function oxidase system (MFO), glutathione- S-transferase (GST) and acetylcholinesterase (AChE), as oxidative stress biomarkers superoxide dismutase (SOD), catalase (CAT), glutathione peroxidase (GPx) and lipid peroxidation (LPO). These biomarkers were used to determine an index to evaluate the stress levels in these two sites. Site A is strongly influenced by metallic contamination, with higher Cu, Cr and Pb in M. galloprovinciallis, as well as higher MT levels, antioxidant enzymes activities and LPO concentrations, and lower ALAD activity. In site B organic compounds (PAHs) are prevalent and native mussels show higher activities of the MFO system components and GST. Transplanted mussels had significant alterations in some biomarkers that reflect the type of contaminants present in each site, which demonstrates the primary role of the environment in determining the physiological characteristics of resident mussels. Therefore the application of ABM using a battery of biomarkers turns out to be a useful approach in sites where usually complex mixtures of contaminants occurs. In this study the biomarkers that better differentiate the impact of different contaminants at each site were MT, CYP450, SOD and CAT. [ABSTRACT FROM AUTHOR]

The performance of a conventional sequence (pre-ozonation, coagulation/ flocculation/ sedimentation, filtration, disinfection) and two non-conventional sequences (pre-ozonation, nanofiltration; and pre-ozonation, coagulation/ flocculation/ sedimentation, nanofiltration) on the removal of natural organic matter (NOM) and disinfection by-products (DBPs) formation potential was evaluated. Raw and treated waters were characterized in terms of molecular weight, which includes the amount of NOM removed and the qualitative changes in the NOM characteristics (molecular weight and hydrophobicity) since they could be directly related with the DBPs formation. The results demonstrate that, for the type of raw water analysed (hydrophilic with low dissolved organic carbon content, 0.99 L/(mg.m) and 1.31 mg DOC/L), both treatment sequences remove larger molecular weight compounds (>1,900 g/mol). Treated waters have the dominant fractions in the smaller molecular size fractions (<750 g/mol). However, the sequences with nanofiltration have a higher percentage of low molecular weight compounds removed (between 430 and 250 g/mol), when compared with conventional sequence, thus the water from nanofiltration sequences will have lower DBPs formation potential. The removal of the smallest molecular size fractions can be enhanced by optimising the water treatment process and the quality of water will improve relating with DBPs formation. [ABSTRACT FROM AUTHOR]

The zinc oxide varistor was originally used as surge protection in electronic circuits. Its energy handling capability was extensively developed by many companies for use in high-voltage surge arresters. Although varistor technology is well known, there is a need for continuous improvement in the varistor manufacturing process in order to achieve a reliable product that meets the requirements of the various international standards. This project focuses directly on the optimization of dry pressing techniques in the manufacturing process of high-voltage varistors in order to attain uniform density, low porosity and uniform distribution of secondary intergranular phase within the grains. The microstructural characteristics of varistor discs pressed in a double-action press machine (70 MPa) before (green) and after sintering are similar to those pressed under isostatic pressure, indicating the efficiency of double-action pressing. The breakdown electric field at 10 mA and nonlinearity coefficient (α) remain practically constant with increasing compaction pressure, increasing only in samples pressed above 70 MPa. [ABSTRACT FROM AUTHOR]