Search

Early-stage evaluation of biofuel and bioproduct technologies is extremely complicated and involves many disparate feasibility criteria, including technical, financial, environmental, logistic, legal, social, and other aspects. Problems can arise for decision-makers when evaluating renewable technologies at this early stage due to bias, shifting preferences or priorities, occurrence of trade-offs, and decision-making complexity. Thus, a method is needed for evaluating disparate, typically non-comparable criteria concurrently. In Part 1 of this research, cradle-tograve environmental LCA was conducted for biomass delivery to a biosugar refinery using Ecoinvent v2.2 data and the TRACI 2 impact assessment method for midpoint impacts. Biomass availability, delivered cost, sugar yield, transportation distance, harvestable months per year, and other aspects of supply chain feasibility were measured for eighteen feedstock biomass types. In Part 2, stochastic multi-attribute analysis (SMAA) was used alongside LCA to develop an environmental preference single-score probability distribution function for feedstock alternatives. Weighted single-scoring and ranking, using multi-criteria decision-making analysis (MCDA), was conducted considering five criteria of biomass supply feasibility: biomass delivered cost, biosugar yield, harvestable months, transport distance, and environmental preference single-score. Corn was shown to cost the most, followed by switchgrass and U.S. primary forest products. Transport distance was found to be highest for residues due to low yield per acre and low covered area. Results of MCDA show that Brazilian eucalyptus and Malaysian empty fruit bunch biomass types were consistently preferred relative to other biomass types. In the U.S., Genera biomass sorghum is most holistically preferred. It is shown that SMAA is helpful for translating LCA data for decision science. It was shown that MCDA can be useful for early-stage biorefinery technology commercialization decision-making, using the novel decision science tool described herein. [ABSTRACT FROM AUTHOR]

Chemical production from crude oil represents a substantial percentage of the yearly fossil fuel use worldwide, and this could be partially offset by renewable feedstocks such as woody biomass and energy crops. Past techno-economic and environmental analyses have been conducted for isolated feedstocks on a regional or national scope. This study encompasses complete supply chain logistics analysis, delivered cost financial analysis, national availability, and environmental life cycle assessment (LCA) for 18 selected cellulosic feedstocks from around the world. A biochemical conversion route to monomeric sugars is assumed for estimated sugar yields and biosugar feedstock cost analysis. US corn grain was determined to have the highest delivered cost, while rice hulls in Indonesia resulted in the lowest cost of the feedstocks studied. Monomeric sugar yields from literature ranged from 358 kg BDMT-1 for US forest residues to 700 kg BDMT-1 for corn syrup. Environmental LCA was conducted in SimaPro using ecoinvent v2.2 data and the TRACI 2 impact assessment method for mid-point impacts cradle-to-incoming biorefinery gate. Carbon absorption during biomass growth contributed most substantially to the reduction of net global warming potential. Rice hulls and switchgrass resulted in the highest global warming potential, followed closely by corn and Thai sugarcane bagasse. Contribution analysis shows that chemical inputs such as fertilizer use contribute substantially to the net environmental impacts for these feedstocks. [ABSTRACT FROM AUTHOR]

Mandated Environmental Protection Agency biofuel qualifications focused on greenhouse gas ( GHG) emissions and fossil fuel use are limited in perspective and have the potential to encourage burden shifting. When a broader host of environmental impacts are examined, environmental trade-offs often exist when biofuels are compared to gasoline. Multivariate analysis methods examining a wide variety of weighting value systems and methodology assumptions were used to determine process design options with the lowest overall environmental impact. A multivariate environmental analysis was applied to the dilute acid pre-treatment process followed by enzymatic hydrolysis and the fermentation process for converting loblolly pine, eucalyptus, natural hardwood, switchgrass, and sweet sorghum biomass to ethanol. The influence of co-product treatment method choices, inclusion of direct land-use change, and electrical grid assumptions were examined using 16 different weighting methods to create a single score result. Biofuel system rankings based on GHG emissions following the Renewable Fuel Standards 2 ( RFS2) methods were very sensitive to the co-product treatment method, inclusion of land-use change emissions, and energy grid assumptions. The multivariate analysis ranking was heavily influenced by other environmental impacts resulting from the production of process chemicals used in ethanol conversion. Weighting methods examined had no influence on the environmental preference ranking of the biofuel scenarios. Additionally, the biofuel ranking based on the RFS2 methodology was different than the ranking following the multivariate approach examining additional impacts. These findings demonstrate a robust approach to biofuel life cycle assessment ( LCA) scenario analysis and suggest that the limited scope of the RFS2 environmental analysis could result in burden shifting. © 2015 Society of Chemical Industry and John Wiley & Sons, Ltd [ABSTRACT FROM AUTHOR]

The financial and environmental performance of the National Renewable Energy Lab's (NREL) thermochemical and biochemical biofuel conversion processes are examined herein with pine, eucalyptus, unmanaged hardwood, switchgrass, and sweet sorghum. The environmental impacts of the process scenarios were determined by quantifying greenhouse gas (GHG) emissions and TRACI impacts. Integrated financial and environmental performance metrics were introduced and used to examine the biofuel production scenarios. The thermochemical and biochemical conversion processes produced the highest financial performance and lowest environmental impacts when paired with pine and sweet sorghum, respectively. The high ash content of switchgrass and high lignin content of loblolly pine lowered conversion yields, resulting in the highest environmental impacts and lowest financial performance for the thermochemical and biochemical conversion processes, respectively. Biofuel produced using the thermochemical conversion process resulted in lower TRACI single score impacts and somewhat lower GHG emissions per megajoule (MJ) of fuel than using the biochemical conversion pathway. The cost of carbon mitigation resulting from biofuel production and corresponding government subsidies was determined to be higher than the expected market carbon price. In some scenarios, the cost of carbon mitigation was several times higher than the market carbon price, indicating that there may be other more cost-effective methods of reducing carbon emissions. [ABSTRACT FROM AUTHOR]

Financial, environmental, and supply chain analyses of empty fruit bunch (EFB) biomass are needed for the development of a sustainable green chemicals industry in Malaysia. Herein, holistic analysis of the supply system and EFB life cycle cradle-to-gate are analyzed in an effort to make recommendations for the commercial-scale collection and delivery of EFB from crude palm oil (CPO) extraction facilities to biorefineries in Malaysia. Supply chain modeling tracked inputs and outputs for financial analysis. The openLCA software was used for life cycle assessment (LCA). Allocation scenarios were used to explore the impact of accounting methodologies on the competitiveness of EFB compared to other feedstocks. Sensitivity analysis on the effect of transportation distance, emission flows, and allocation methods on resulting environmental impacts were conducted. The No Burden, Economic, and Mass allocation scenarios resulted in -1629, -1619, and -1474 kg CO2-eq. BD tonne-1 EFB global warming impacts (GW), respectively. Delivered cost for EFB was calculated to be approximately 45 US$ BD tonne-1. Environmental burdens were sensitive to allocation scenario, covered area, and land use change. Delivered cost was sensitive to transport distance, covered area, and yield. It was shown that there is sufficient Malaysia EFB available for between 9 and 28 biorefineries, depending upon the scale of production. [ABSTRACT FROM AUTHOR]

The production of six regionally important cellulosic biomass feedstocks, including pine, eucalyptus, unmanaged hardwoods, forest residues, switchgrass, and sweet sorghum, was analyzed using consistent life cycle methodologies and system boundaries to identify feedstocks with the lowest cost and environmental impacts. Supply chain analysis was performed for each feedstock, calculating costs and supply requirements for the production of 453,592 dry tonnes of biomass per year. Cradle-togate environmental impacts from these modeled supply systems were quantified for nine mid-point indicators using SimaPro 7.2 LCA software. Conversion of grassland to managed forest for bioenergy resulted in large reductions in GHG emissions due to carbon uptake associated with direct land use change. By contrast, converting forests to cropland resulted in large increases in GHG emissions. Production of forest-based feedstocks for biofuels resulted in lower delivered cost, lower greenhouse gas (GHG) emissions, and lower overall environmental impacts than the agricultural feedstocks studied. Forest residues had the lowest environmental impact and delivered cost per dry tonne. Using forest-based biomass feedstocks instead of agricultural feedstocks would result in lower cradle-to-gate environmental impacts and delivered biomass costs for biofuel production in the southern U.S. [ABSTRACT FROM AUTHOR]

There has been great attention focused on the effects of first and second generation biofuels on global warming. The Energy Independence and Security Act (EISA) and the Renewable Fuel Standard (RFS) have mandated production levels and performance criteria of biofuels in the United States. The thermochemical conversion of biomass to ethanol shows potential as a biofuel production pathway. The objective of this research was to examine the alcohol yields and GHG emissions from the thermochemical conversion process for six different feedstocks on a gate-to-gate basis. GHG analyses and life cycle assessments were performed for natural hardwood, loblolly pine, eucalyptus, miscanthus, corn stover, and switchgrass feedstocks using a NREL thermochemical model and SimaPro. Alcohol yield and GHG emission for the hybrid poplar baseline feedstock conversion were 105,400 L dry metric ton-1 and 2.8 kg CO2 eq. per liter, respectively. Compared with the baseline, loblolly pine produced the highest alcohol yields, an 8.5% increase, and the lowest GHG emissions per liter of ethanol, a 9.1% decrease. Corn stover, due to its high ash content, had the lowest yields and the highest GHG emissions per liter of ethanol. The results were highly sensitive to the ash and water content of the biomass, indicating that biomass properties can significantly affect the environmental impact of the thermochemical ethanol conversion process. [ABSTRACT FROM AUTHOR]

The integration of combinatorial green chemistry (CGC), a more benign approach to combinatorial chemistry, with environmental life cycle assessment (LCA) methodologies as an improved process development methodology is discussed. It is expected that the CGC approach will require less labor and result in more globally optimized assay results, leading to more optimized unit process design. The technique utilizes chemical assay stage information to rapidly predict globally optimized process conditions based on techno-economic and LCA indicators. A simplified kraft pulping case study of the application of CGC-LCA is demonstrated herein, but CGC analyses could be applied to virtually any chemical-based project development and implementation project. [ABSTRACT FROM AUTHOR]

Abstract: In theory, biosugar for conversion to bioproducts can be produced economically from a variety of biomass types in many different technological, co‐production, and biorefinery siting contexts. In this paper, process modeling and financial analysis were conducted for all permutations of biochemical conversion pathways, global biomass types, co‐product options, and biorefinery siting contexts for biosugar production. Minimum sugar revenue (MSR) required to achieve a 15% internal rate of return values for scenarios examined ranged from $150–$748 per tonne. The scenarios with the lowest MSRs were sugarcane in South America and Asia, assuming hot water cook and co‐location or repurpose siting contexts. Another financially optimized scenario is corn grain, also assuming hot water cook, co‐producing distiller’s dry grains and solubles (DDGS), in a repurpose siting context. Against a benchmark sugar price of $408 per metric tonne, an internal rate of return on investment of >15% can typically only be achieved via previously demonstrated conversion pathways using sugar cane and corn grain. Major cost drivers were feedstock cost per metric tonne of carbohydrate, sugar yield, capital investment per annual metric tonne of sugar produced, residue value, and siting context. Near‐term promising technologies include autohydrolysis and dilute acid pathways. Generally, scenarios are financially enhanced by co‐location or repurposing, reducing capital expenditure (CAPEX) by about 33% and 50%, respectively, with negligible impact on cash cost. Conversion process complexity drives capital investment, making some scenarios infeasible despite high sugar yields. Any of the five major cost drivers can impact the order of financial attraction of scenarios, with the outcome of the analysis typically not obvious in advance. © 2018 Society of Chemical Industry and John Wiley & Sons, Ltd [ABSTRACT FROM AUTHOR]