Search

The maintenance and restoration of wetland habitat is a priority conservation action for most waterfowl and other wetland-dependent species in North America. Despite much progress in targeting habitat management in staging and wintering areas, methods to identify and target high-quality breeding habitats that result in the greatest potential for wildlife are still required. This is particularly true for species that breed in remote, inaccessible areas such as the American black duck, an intensively managed game bird in Eastern North America. Although evidence suggests that black ducks prefer productive, nutrient-rich waterbodies, such as beaver ponds, information about the distribution and quality of these habitats across the vast boreal forest is lacking with accurate identification remaining a challenge. Continuing advancements in remote sensing technologies that provide spatially extensive and temporally repeated information are particularly useful in meeting this information gap. In this study, we used multi-source remotely sensed information and a fuzzy analytical hierarchy process to map the spatial distribution of beaver ponds in Ontario. The use of multi-source data, including a Digital Elevation Model, a Sentinel-2 Multi-Spectral Image, and RadarSat 2 Polarimetric data, enabled us to identify individual beaver ponds on the landscape. Our model correctly identified an average of 83.0% of the known beaver dams and 72.5% of the known beaver ponds based on validation with an independent dataset. This study demonstrates that remote sensing is an effective approach for identifying beaver-modified wetland features and can be applied to map these and other wetland habitat features of interest across large spatial extents. Furthermore, the systematic acquisition strategy of the remote sensors employed is well suited for monitoring changes in wetland conditions that affect the availability of habitats important to waterfowl and other wildlife. [ABSTRACT FROM AUTHOR]

Sea-surface petroleum pollution is observed as "oil slicks" (i.e., "oil spills" or "oil seeps") and can be confused with "look-alike slicks" (i.e., environmental phenomena, such as low-wind speed, upwelling conditions, chlorophyll, etc.) in synthetic aperture radar (SAR) measurements, the most proficient satellite sensor to detect mineral oil on the sea surface. Even though machine learning (ML) has become widely used to classify remotely-sensed petroleum signatures, few papers have been published comparing various ML methods to distinguish spills from look-alikes. Our research fills this gap by comparing and evaluating six traditional techniques: simple (naive Bayes (NB), K-nearest neighbor (KNN), decision trees (DT)) and advanced (random forest (RF), support vector machine (SVM), artificial neural network (ANN)) applied to different combinations of satellite-retrieved attributes. 36 ML algorithms were used to discriminate "ocean-slick signatures" (spills versus look-alikes) with ten-times repeated random subsampling cross validation (70-30 train-test partition). Our results found that the best algorithm (ANN: 90%) was >20% more effective than the least accurate one (DT: ~68%). Our empirical ML observations contribute to both scientific ocean remote-sensing research and to oil and gas industry activities, in that: (i) most techniques were superior when morphological information and Meteorological and Oceanographic (MetOc) parameters were included together, and less accurate when these variables were used separately; (ii) the algorithms with the better performance used more variables (without feature selection), while lower accuracy algorithms were those that used fewer variables (with feature selection); (iii) we created algorithms more effective than those of benchmark-past studies that used linear discriminant analysis (LDA: ~85%) on the same dataset; and (iv) accurate algorithms can assist in finding new offshore fossil fuel discoveries (i.e., misclassification reduction). [ABSTRACT FROM AUTHOR]

This paper describes an approach for combining Landsat and Radarsat satellite images to generate national statistics for urban ecosystem accounting. These accounts will inform policy related to the development of mitigation measures for climatic and hydrologic events in Canada. Milton, Ontario was used as a test case for the development of an approach identifying urban ecosystem types and assessing change from 2001 to 2019. Methods included decomposition of Radarsat images into polarimetric parameters to test their usefulness in characterizing urban areas. Geographic object-based image analysis (GEOBIA) was used to identify urban ecosystem types following an existing classification of local climate zones. Three supervised classifiers: decision tree, random forest and support vector machine, were compared for their accuracy in mapping urban ecosystems. Ancillary geospatial datasets on roads, buildings, and Landsat-based vegetation were used to better characterize individual ecosystem assets. Change detection focused on the occurrence of changes that can impact ecosystem service supply – i.e., conversions from less to more built-up urban types. Results demonstrate that combining Radarsat polarimetric parameters with the Landsat images improved urban characterization using the GEOBIA random forest classifier. This approach for mapping urban ecosystem types provides a practical method for measuring and monitoring changes in urban areas. [ABSTRACT FROM AUTHOR]

Flooding is one of the natural disasters that affect the livelihood of the people living in the floodplains, like Bangladesh. Here, we proposed to employ SAR satellite images in assessing the flood extent and crop damage with the hydrometeorological observations in the southwestern region of Bangladesh. We observed that the unusual flood of the year 2000 was the combined effect of the huge amount of rainfall in the local areas as well as oncoming water flows from West Bengal in India. During late monsoon of 2000, we experienced that the amount of rainfall was in several magnitudes (250-450%) than the expected over the region. Bangladesh, one of the largest deltas in the world, in general experienced recurrent flood events from the spill of the three mighty rivers in every year. However, we observed that during 2000 the river situation was slightly above the average year conditions and below the moderate level of flood warning conditions, indicating non-riverine flooding. Therefore, we used the SAR images in delineating the flood extent and its damages for the standing aman crops. We observed that the flood extent mapping was having more than 95% agreements with the ground data and crop damage information was about 75% in agreement with the government estimates. The flood extent and crop damage map was found to be useful during the unprecedented flood in the southwestern region of Bangladesh. The use of near real-time SAR imageries thus would be helpful in developing strategies for flood management and disaster mitigation activities and could be utilized on a regular basis. [ABSTRACT FROM AUTHOR]

Doppler velocity can be derived by calculating Doppler shift anomalies between predicted and estimated Doppler centroids. The predicted Doppler centroid is calculated based on a geometric model of satellite assuming that the target is not moving. The estimated Doppler centroid can be directly extracted from the raw SAR signal data by applying the average cross-correlation coefficient method. It is known that wind-generated ocean waves can significantly contribute to Doppler velocity due to the correlation between orbital motions of the waves and (tilt and hydrodynamic) modulated radar cross sections, in addition to what sea surface current contributes. In this study, the characteristics of Doppler velocities under hurricane conditions were investigated using RADARSAT-1 ScanSAR raw data. Five different hurricanes (Hurricane Dean, Hurricane Ivan, Hurricane Kyle, Hurricane Lili, and Typhoon Xangsane) and sequential acquisitions of two hurricanes (Hurricane Kyle and Hurricane Lili) were selected to study the contribution of wind-induced waves to Doppler velocities and compared with in situ measurements of drifting buoys. The results show that hurricane-generated seas and associated winds and waves appear to be different from ordinary sea state. This leads to lower estimates of Doppler velocities than expected and much closer to sea surface current velocities. [ABSTRACT FROM PUBLISHER]

Support vector machines (SVMs) have been applied to land cover classification, and a number of studies have demonstrated their ability to increase classification accuracy. The high correlation between the data set and SVM training model parameters indicates the high performance of the classification model. To improve the correlation, research has focused on the integration of SVMs and other algorithms for data set selection and SVM training model parameter estimation. This letter proposes a novel method, based on a particle filter (PF), of estimating SVM training model parameters according to an observation system. By treating the SVM training function as the observation system of the PF, the new method automatically updates the SVM training model parameters to values that are more appropriate for the data set and can provide a better classification model than can the original model, wherein the parameters are set by trial and error. Various experiments were conducted using Radarsat-2 synthetic aperture radar data from the 2011 Thailand flood. The proposed method provides superior performance and a more accurate analysis compared with the standard SVM. [ABSTRACT FROM PUBLISHER]

The main goal of this research was to detect oil spills, to determine the oil spill frequency, and to approximate oil leak sources around the Oil Rocks Settlement, the Chilov and Pirallahi Islands in the Caspian Sea using multi-temporal ENVISAT Advanced Synthetic Aperture Radar Wide Swath Medium-resolution images acquired in the period of 2009-2010. The processing of ENVISAT satellite images for oil spill detection included the following stages: filtering of images for noise reduction and imagery enhancement, preliminary segmentation for detection of dark features, interactive visual interpretation for the discrimination among other oil spill look-alikes, computation of oil spill frequency, and approximation of oil leak sources. The analysis showed that the appearance of the oil slicks in the radar imagery significantly depends on the Caspian Sea wind speed. The best wind speed conditions for the detection of oil spill were determined to be 2.5-14 m/s. The hot spot areas of detected oil spill frequencies for 2009-2010 were the following: 2-25 (4,658.83 sq. km.), 26-45 (302.83 sq. km.), 46-75 (77.95 sq. km.). The most critical oil leak sources were observed around the Oil Rocks Settlement. The exponential regression analysis between wind speeds and oil slick areas in 2009 with R equal to 0.61 showed that larger oil spill areas were observed with lower wind speeds. The spatiotemporal patterns of currents in the Caspian Sea explained the multi-directional spatial distribution of oil spills around the Oil Rocks Settlement. [ABSTRACT FROM AUTHOR]

We present a flexible, integrated statistical-based modeling approach to improve the robustness of soil moisture data predictions. We apply this approach in exploring the consequence of different choices of leading predictors and covariates. Competing models, predictors, covariates and changing spatial correlation are often ignored in empirical analyses and validation studies. An optimal choice of model and predictors may, however, provide a more consistent and reliable explanation of the high environmental variability and stochasticity of soil moisture observational data. We integrate active polarimetric satellite remote-sensing data (RADARSAT-2, C-band) with ground-based in-situ data across an agricultural monitoring site in Canada. We apply a grouped step-wise algorithm to iteratively select best-performing predictors of soil moisture. Integrated modeling approaches may better account for observed uncertainty and be tuned to different applications that vary in scale and scope, while also providing greater insights into spatial scaling (upscaling and downscaling) of soil moisture variability from the field- to regional scale. We discuss several methodological extensions and data requirements to enable further statistical modeling and validation for improved agricultural decision-support. [ABSTRACT FROM AUTHOR]

Flood risk management serves to reduce the negative consequences of flood disaster to a certain extent. In agriculture-dominated countries, the extent of damage incurred in crop land by heavy and frequent floods is quite high. The present study aims to develop an optimal rice planning procedure considering the flood risk through hydrodynamic floodplain modeling in flood-prone delta region of Mahanadi river basin in India. As high-resolution topographic data and surveyed river cross sections are unavailable for the study area, MIKE FLOOD model setup is prepared using river cross sections and floodplain elevation model derived from freely available SRTM DEM. In this study, MIKE FLOOD setup is prepared and flood inundation simulation is carried out. Flood inundation extent obtained is compared with RADARSAT-1 image-based inundation extent. Subsequently, flood risk is evaluated for cropping pattern in floodplains using functional relationships between flood characteristics and the expected damage of different rice varieties. Based on the flood risk, an optimal rice planning model is developed for maximizing the net benefits in the floodplain. The average annual expected net benefit of optimal rice allocation model for the study area is to the tune of INR 601 million compared to INR 432 million for normal rice variety cultivation throughout the study area. [ABSTRACT FROM AUTHOR]

Synthetic aperture radar technology has revolutionized earth observation with very high resolutions of below 5m, making it possible to distinguish individual urban features like buildings and even cars on the surface of the earth. But, the difficulty in interpretation of these images has hindered their use. The geometry of target objects and their orientation with respect to the SAR sensor contribute enormously to unexpected signatures on SAR images. Geometry of objects can cause single, double or multiple reflections which, in turn, affect the brightness value on the SAR images. Occlusions, shadow and layover effects are present in the SAR images as a result of orientation of target objects with respect to the incident microwaves. Simulation of SAR images is the best and easiest way to study and understand the anomalies. This paper discusses synthetic aperture radar image simulation, with the study of effect of target geometry as the main aim. Simulation algorithm has been developed in the time domain to provide greater modularity and to increase the ease of implementation. This algorithm takes into account the sensor and target characteristics, their locations with respect to the earth, 3-dimensional model of the target, sensor velocity, and SAR parameters. two methods have been discussed to obtain position and velocity vectors of SAR sensor -- the first, from the metadata of real SAR image used to verify the simulation algorithm, and the second, from satellite orbital parameters. Using these inputs, the SAR image coordinates and backscatter coefficients for each point on the target are calculated. The backscatter coefficients at target points are calculated based on the local incidence angles using Muhleman's backscatter model. The present algorithm has been successfully implemented on radarsat-2 image of San Francisco bay area. Digital elevation models (DEMs) of the area under consideration are used as the 3d models of the target area. DEMs of different resolutions have been used to simulate SAR images in order to study how the target models affect the accuracy of simulation algorithm. The simulated images have been compared with radarsat-2 images to observe the efficiency of the simulation algorithm in accurately representing the locations and extents of different objects in the target area. The simulated algorithm implemented in this paper has given satisfactory results as the simulated images accurately show the different features present in the DEM of the target area. [ABSTRACT FROM AUTHOR]

The potential of quad polarization radar data for the target discrimination has been analyzed. Quad polarization data of the RADARSAT-2 fine resolution mode has been utilized. Class separability analysis has been carried out on different polarization combinations using Transformed Divergence (TD) method and it is observed that HH-HV/VH-VV polarization combination gives better class separability when compared to other polarization combinations. Classification has been carried out on the optimized polarization combination using Maximum likelihood (MLC) and Support Vector Machine (SVM) classifiers. It is observed that SVM classification gives better classification accuracy compared to MLC. Overall classification accuracy is 93.03% for SVM and 88.78% for MLC. Class separability and classification accuracy comparison results are presented. [ABSTRACT FROM AUTHOR]

Our ability to simulate and understand oceanic conditions of the Gulf of St Lawrence (GSL) has significantly increased in the last decade with the development of regional ocean models combining scientific knowledge, oceanographic data, and computing techniques. This has created opportunities for their integration with meteorological forecast models where the importance of sea ice-ocean dynamics in air-sea exchanges was recently demonstrated. In order to produce accurate initial conditions for coupled weather forecasts, a GSL ice-ocean 'pseudo' analysis (IOPA) system has been developed and implemented operationally at the Canadian Meteorological Centre (CMC). Based on prognostic ice-ocean model solutions the IOPA system has sufficient skill to produce realistic daily fields without flux correction or data assimilation of temperature and salinity. Using only a simple assimilation method for sea-ice data, daily oceanic fields are obtained and can be used to initialize ice-ocean or coupled atmospheric forecasting systems. A 3-year retrospective evaluation of this operational method is presented focusing on sea-surface temperature (SST) and sea-ice conditions. Model estimates are compared with in situ and satellite-derived data. Results show that the IOPA system has an accuracy equivalent to or better than the current operational SST and ice analyses produced at the CMC. Together with preceding modelling efforts, this work lays the foundation for the first state-of-the-art GSL ocean analysis and forecast systems combining ocean modelling and real-time three-dimensional data assimilation. Coupled atmosphere-ice-ocean forecasts produced with the same ice-ocean model and initialized with the IOPA system are presented in a companion paper. Copyright © 2012 Crown in the right of Canada. Published by John Wiley & Sons Ltd. [ABSTRACT FROM AUTHOR]

RADARSAT and ERS-2 data collected at multiple incidence angles are used to characterize the seasonal variations in the backscatter of snow-covered landscapes in the northern Hudson Bay Lowlands during the winters of 1997/98 and 1998/99. The study evaluates the usefulness of C-band SAR systems for retrieving the snow water equivalent under dry snow conditions in the forest-tundra ecotone. The backscatter values are compared against ground measurements at six sampling sites, which are taken to be representative of the land-cover types found in the region. The contribution of dry snow to the radar return is evident when frost penetrates the first 20 cm of soil. Only then does the backscatter respond positively to changes in snow water equivalent, at least in the open and forested areas near the coast, where 1-dB increases in backscatter for each approximate 5-10 mm of accumulated water equivalent are observed at 20-31° incidence angles. Further inland, the backscatter shows either no change or a negative change with snow accumulation, which suggests that the radar signal there is dominated by ground surface scattering (e.g., fen) when not attenuated by vegetation (e.g., forested and transition). With high-frequency ground-penetrating radar, we demonstrate the presence of a 10-20-cm layer of black ice underneath the snow cover, which causes the reduced radar returns (-15 dB and less) observed in the inland fen. A correlation between the backscattering and the snow water equivalent cannot be determined due to insufficient observations at similar incidence angles. To establish a relationship between the snow water equivalent and the backscatter, only images acquired with similar incidence angles should be used, and they must be corrected for both vegetation and ground effects. [ABSTRACT FROM AUTHOR]

This work proposes a method for detecting inundation between semi-diurnal low and high water conditions in the northern Gulf of Mexico using high-resolution satellite imagery. Radarsat 1, Landsat imagery and aerial photography from the Apalachicola region in Florida were used to demonstrate and validate the algorithm. A change detection approach was implemented through the analysis of red, green and blue (RGB) false colour composites image to emphasise differences in high and low tide inundation patterns. To alleviate the effect of inherent speckle in the SAR images, we also applied ancillary optical data. The flood-prone area for the site was delineated a priori through the determination of lower and higher water contour lines with Landsat images combined with a high-resolution digital elevation model. This masking technique improved the performance of the proposed algorithm with respect to detection techniques using the entire Radarsat scene. The resulting inundation maps agreed well with historical aerial photography as the probability of detection reached 83%. The combination of SAR data and optical images, when coupled with a high-resolution digital elevation model, was shown to be useful for inundation mapping and have a great potential for evaluating wetting/drying algorithms of inland and coastal hydrodynamic models. Copyright © 2011 John Wiley & Sons, Ltd. [ABSTRACT FROM AUTHOR]

An analysis of the sensitivity of synthetic aperture radar (SAR) backscatter (σo) to crop and soil conditions was conducted using 57 RADARSAT-2 C-band quad-polarized SAR images acquired from April to September 2009 for large fields of wheat, barley, oat, corn, onion, and alfalfa in Barrax, Spain. Preliminary results showed that the cross-polarized σHVo was particularly useful for monitoring both crop and soil conditions and was the least sensitive to differences in beam incidence angle. The greatest separability of barley, corn, and onion occurred in spring after the barley had been harvested or in the narrow time window associated with grain crop heading when corn and onion were still immature. The time series of σo offered reliable information about crop growth stage, such as jointing and heading in grain crops and leaf growth and reproduction in corn and onion. There was a positive correlation between σo and the Normalized Difference Vegetation Index for onion and corn but not for all crops, and the impact of view direction and incidence angle on the time series was minimal compared to the signal response to crop and soil conditions. Related to planning for future C-band SAR missions, we found that quad-polarization with image acquisition frequency from 3-6 days was best suited for distinguishing crop types and for monitoring crop phenology, single- or dual-polarization with an acquisition frequency of 3-6 days was sufficient for mapping crop green biomass, and single- or dual-polarization with daily image acquisition was necessary to capture rapid changes in soil moisture condition. [ABSTRACT FROM AUTHOR]

Remote sensing is the most practical method available to managers of flood-prone areas for quantifying and mapping flood impacts. This study explored large inundation areas in the Maghna River Basin, around the northeastern Bangladesh, as determined from passive sensor LANDSAT data and the cloud-penetrating capabilities of the active sensors of the remote imaging microwave RADARSAT. This study also used passive sensor LANDSAT wet and dry images for the year 2000. Spatial resolution was 30 m by 30 m for comparisons of the inundation area with RADARSAT images. RADARSAT images with spatial resolution of 50 m by 50 m were used for frequency analysis of floods from 2000 to 2004. Time series images for 2004 were also used. RADARSAT remote sensing data, GIS data, and ground data were used for the purpose of flood monitoring, mapping and assessing. A supervised classification technique was used for this processing. They were processed for creating a maximum water extent map and for estimating inundation areas. The results of this study indicated that the maximum extent of the inundation area as estimated using RADARSAT satellite imaging was about 29, 900.72 km in 2004, which corresponded well with the heavy rainfall around northeast region, as seen at the Bhairab Bazar station and with the highest water level of the Ganges-Brahmaputra-Meghna (GBM) Rivers. A composite of 5 years of RADARSAT inundation maps from 2000 to 2004, GIS data, and damage data, was used to create unique flood hazard maps. Using the damage data for 2004 and the GIS data, a set of damage maps was also created. These maps are expected to be useful for future planning and flood disaster management. Thus, it has been demonstrated that RADARSAT imaging data acquired over the Bangladesh have the ability to precisely assess and clarify inundation areas allowing for successful flood monitoring, mapping and disaster management. [ABSTRACT FROM AUTHOR]

Mapping and monitoring changes in the distribution of cropland provide information that aids sustainable approaches to agriculture and supports early warning of threats to global and regional food security. This paper tested the capability of Phased Array type L-band Synthetic Aperture Radar (SAR) (PALSAR) multipolarization and polarimetric data for crop classification. L-band results were compared with those achieved with a C-band SAR data set (ASAR and RADARSAT-1), an integrated C- and L-band data set, and a multitemporal optical data set. Using all L-band linear polarizations, corn, soybeans, cereals, and hay-pasture were classified to an overall accuracy of 70%. A more temporally rich C-band data set provided an accuracy of 80%. Larger biomass crops were well classified using the PALSAR data. C-band data were needed to accurately classify low biomass crops. With a multifrequency data set, an overall accuracy of 88.7% was reached, and many individual crops were classified to accuracies better than 90%. These results were competitive with the overall accuracy achieved using three Landsat images (88.0%). L-band parameters derived from three decomposition approaches (Cloude-Pottier, Freeman-Durden, and Krogager) produced superior crop classification accuracies relative to those achieved using the linear polarizations. Using the Krogager de- composition parameters from all three PALSAR acquisitions, an overall accuracy of 77.2% was achieved. The results reported in this paper emphasize the value of polarimetric, as well as multi- frequency SAR, data for crop classification. With such a diverse capability, a SAR-only approach to crop classification becomes increasingly viable. [ABSTRACT FROM AUTHOR]

Industrial activity in Canada’s north is increasing, placing demands on the use of water from lakes to build ice roads. Winter water withdrawal from these lakes has the potential to impact overwintering fish. Removal of water from small lakes can decrease oxygen and habitat available to fish. To address this issue, a protocol has been developed by the Department of Fisheries and Oceans outlining water withdrawal thresholds. Bathymetric surveys are the traditional method to determine lake depth, but are costly given the remoteness of northern lakes. This paper investigates the use of satellite C-band synthetic aperture radar (SAR) remote sensing technology as a potential alternative or complement to traditional survey methods. Previous research has shown that a SAR can detect the transition from grounded to floating ice on lakes, or if a lake is completely frozen. Grounded ice has a dark signature while floating ice appears very bright in contrast. Similar results were observed for the datasets acquired in the study area. This suggests that lakes that freeze completely to the bottom can be identified using SAR. Such water bodies would not be viable fish overwintering habitat and can therefore be used as water sources without thresholds necessary. However, attempts to accurately calculate the depth of the ice at the grounded-floating ice boundary using bathymetric profiles acquired in the summer and lake ice thickness measurements from a reference lake near Inuvik proved to be unreliable. [ABSTRACT FROM AUTHOR]

In this letter, a new wind-vector algorithm is presented that uses radar backscatter sigma0 measurements at two adjacent subscenes of RADARSAT-1 synthetic aperture radar (SAR) images, with each subscene having slightly different geometry. Resultant wind vectors are validated using in situ buoy measurements and compared with wind vectors determined from a hybrid wind-retrieval model using wind directions determined by spectral analysis of wind-induced image streaks and observed by colocated QuikSCAT measurements. The hybrid wind-retrieval model consists of CMOD-IFR2 [applicable to C-band vertical-vertical (VV) polarization] and a C-band copolarization ratio according to Kirchhoff scattering. The new algorithm displays improved skill in wind-vector estimation for RADARSAT-1 SAR data when compared to conventional wind-retrieval methodology. In addition, unlike conventional methods, the present method is applicable to RADARSAT-1 images both with and without visible streaks. However, this method requires ancillary data such as buoy measurements to resolve the ambiguity in retrieved wind direction [ABSTRACT FROM PUBLISHER]

Ice concentration retrieved from spaceborne passive-microwave observations is a prime input to operational sea-ice-monitoring programs, numerical weather prediction models, and global climate models. Atmospheric Environment Service (AES)-York and the Enhanced National Aeronautics and Space Administration Team (NT2) are two algorithms that calculate ice concentration from Special Sensor Microwave/Imager observations. This paper furnishes a comparison between ice concentrations (total, thin, and thick types) output from NT2 and AES-York algorithms against the corresponding estimates from the operational analysis of Radarsat images in the Canadian Ice Service (CIS). A new data fusion technique, which incorporates the actual sensor's footprint, was developed to facilitate this study. Results have shown that the NT2 and AES-York algorithms underestimate total ice concentration by 18.35% and 9.66% concentration counts on average, with 16.8% and 15.35% standard deviation, respectively. However, the retrieved concentrations of thin and thick ice are in much more discrepancy with the operational CIS estimates when either one of these two types dominates the viewing area. This is more likely to occur when the total ice concentration approaches 100 %. If thin and thick ice types coexist in comparable concentrations, the algorithms' estimates agree with CIS's estimates. In terms of ice concentration retrieval, thin ice is more problematic than thick ice. The concept of using a single tie point to represent a thin ice surface is not realistic and provides the largest error source for retrieval accuracy. While AES-York provides total ice concentration in slightly more agreement with CIS's estimates, NT2 provides better agreement in retrieving thin and thick ice concentrations. [ABSTRACT FROM AUTHOR]

During a ship voyage from Tasmania to Antarctica in summer 2000/01, radiative and meteorological measurements were continuously made, from which the surface energy budget was calculated. Sea conditions throughout the voyage ranged from open water to broken pack and finally to snow-covered unbroken sea ice in McMurdo Sound. The global radiation increased on average during the trip (to higher latitudes) as we travelled poleward. The net radiation, which was positive (toward the surface) on average, decreased however, mostly due to the increase in surface albedo. For open water, most of the net radiation is used for evapouration (61%), while for broken sea-ice conditions, nearly all energy is used for melting of the sea ice or heating of the ocean (96%). For unbroken snow-covered sea ice, the net radiation lies close to zero, due to the high surface albedo, which reached a mean value of 0.81. The sensible heat flux becomes the largest heat source and nearly all the energy is used for warming of the surface. Finally, a Radarsat image, on which the ship track was visible, was used to compare the ship observations with satellite derived ice types. [ABSTRACT FROM AUTHOR]

Earth observation from active microwave satellites such as RADARSAT-1 is an excellent tool to monitor and forecast floods. Two complementary approaches are described in this paper: (a) real time or near-real time monitoring of flood extent and (b) mapping of hydrological properties of drainage basins. Since it can penetrate through clouds, which usually occur during precipitation periods, and due to the fact that it can be programmed with different incidence angles, RADARSAT-1 enables frequent coverage over specific areas of interest. It has been used successfully to monitor a major flood of the Red River in Manitoba in 1997, by providing frequent coverage of the flood during its progression and decrease. Resulting data and images have been useful in planning the emergency measures and in assessing flood damage. RADARSAT has also the ability to characterize hydrological properties of watersheds. It has been used in agricultural catchments in Europe for mapping soil surface roughness, which affects runoff coefficients, concentration time and resistance to erosion processes. Used to complement optical data, RADARSAT has provided information on the status of land use and soil protective cover in drainage basins. This information can then be translated into parameters and coefficients that hydrological models can use for runoff and flood forecasting [ABSTRACT FROM AUTHOR]

A multisensor data fusion algorithm based on a multilayer neural network is presented for sea ice classification in the winter period. The algorithm uses European Remote Sensing (ERS), RADARSAT synthetic aperture radar (SAR), and low-resolution television camera images and image texture features. Based on a set of in situ observations made at the Kara Sea, a neural network is trained, and its structure is optimized using a pruning method. The performance of the algorithm with different combinations of input features (sensors) is assessed and compared with the performance of a linear discriminant analysis (LDA)-based algorithm. We show that for both algorithms a substantial improvement can be gained by fusion of the three different types of data (91.2% for the neural network) as compared with single-source ERS (66.0%) and RADARSAT (70.7%) SAR image classification. Incorporation of texture increases classification accuracy. This positive effect of texture becomes weaker with increasing number of sensors (from 8.4 to 6.4 percent points for the use of two and three sensors, respectively). In view of the short training time and smaller number of adjustable parameters, this result suggests that semiparametric classification methods can be considered as a good alternative to the neural networks and traditional parametric statistical classifiers applied for the sea ice classification. [ABSTRACT FROM AUTHOR]

Many of today’s agricultural landscapes once held vast amounts of wetland habitat for waterbirds and other wildlife. Successful restoration of these landscapes relies on access to accurate maps of the wetlands that remain. We used C-band (5.6-cm-wavelength), HH-polarized radar remote sensing (RADARSAT) at a 38° incidence angle (8-m resolution) to map the distribution of winter shorebird (Charadriiformes) habitat on agricultural lands in the Willamette Valley of western Oregon. We acquired imagery on three dates (10 December 1999, 27 January 2000, and 15 March 2000) and simultaneously collected ground reference data to classify radar signatures and evaluate map accuracy of four habitat classes: (1) wet with ≤ 50% vegetation (considered optimal shorebird habitat), (2) wet with > 50% vegetation, (3) dry with ≤ 50% vegetation, and (4) dry with > 50% vegetation. Overall accuracy varied from 45 to 60% among the three images, but the accuracy of focal class 1 was greater, ranging from 72 to 80%. Class 4 coverage was stable and dominated maps (40% of mapped study area) for all three dates, while coverage of class 3 decreased slightly throughout the study period. Among wet classes, class 1 was most abundant (about 30% coverage) in December and January, decreasing in March to approximately 15%. Conversely, class 2 increased dramatically from January to March, likely due to transition from class 1 as vegetation grew. This approach was successful in detecting optimal habitat for shorebirds on agricultural lands. For modest classification schemes, radar remote sensing is a valuable option for wetland mapping in areas where cloud cover is persistent. [ABSTRACT FROM AUTHOR]

Copyright of Canadian Journal of Civil Engineering is the property of Canadian Science Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

An approach for mapping near-surface soil moisture at the watershed scale from RADARSAT-1 synthetic aperture radar (SAR) data was developed and tested on seven RADARSAT-1 SAR images acquired over the northern portion of the Châteauguay River Basin in southwestern Quebec, Canada, dominated by agricultural and herbaceous fields. A soil surface roughness map was first retrieved from a SAR image by inverting an empirical backscatter model with known (or assumed) soil moisture. The resulting map was then used with the backscatter model to recover near-surface soil moisture for the remaining SAR images. Field campaigns were conducted concurrent to SAR image acquisitions to measure soil moisture and surface roughness in 24 fields. Good agreement was observed between watershed-scale soil moisture values and measurements averaged for all sampled fields, with a correlation coefficient of 0.96 and an RMS error of 2.2%. However, considerable scatter was found between observed and SAR-derived soil moisture estimates at the field scale. Although the generated maps reveal reasonable small-scale soil moisture variability, no definitive conclusions could be drawn as to whether or not the proposed approach can quantify soil moisture at the field or within field scale due to insufficient ground measurements. Furrows and herbaceous and crop vegetation, which are known to affect the radar signal, appeared to have little influence on the ability to retrieve soil moisture at the watershed scale for the images analyzed in this study. [ABSTRACT FROM AUTHOR]

Many of today’s agricultural landscapes once held vast amounts of wetland habitat for waterbirds and other wildlife. Successful restoration of these landscapes relies on access to accurate maps of the wetlands that remain. We used C-band (5.6-cm-wavelength), HH-polarized radar remote sensing (RADARSAT) at a 38° incidence angle (8-m resolution) to map the distribution of winter shorebird (Charadriiformes) habitat on agricultural lands in the Willamette Valley of western Oregon. We acquired imagery on three dates (10 December 1999, 27 January 2000, and 15 March 2000) and simultaneously collected ground reference data to classify radar signatures and evaluate map accuracy of four habitat classes: (1) wet with ≤ 50% vegetation (considered optimal shorebird habitat), (2) wet with > 50% vegetation, (3) dry with ≤ 50% vegetation, and (4) dry with > 50% vegetation. Overall accuracy varied from 45 to 60% among the three images, but the accuracy of focal class 1 was greater, ranging from 72 to 80%. Class 4 coverage was stable and dominated maps (40% of mapped study area) for all three dates, while class 3 coverage decreased slightly throughout the study period. Among wet classes, class 1 was most abundant (30% coverage) in December and January, decreasing in March by 15%. Conversely, class 2 increased dramatically from January to March, likely due to transition from class 1 as vegetation grew. This approach was successful in detecting optimal habitat for shorebirds on agricultural lands. For modest classification schemes, radar remote sensing is a valuable option for wetland mapping in areas where cloud cover is persistent. [ABSTRACT FROM AUTHOR]

The Arctic land surface water balance plays an important role in regulating the planetary heat balance and global ocean circulation. Lakes and wetlands are common features in the low-gradient Putuligayuk River watershed in northern Alaska, with important implications for the annual water balance. Evapotranspiration exceeds precipitation over the summer, and there is a gradual reduction in wetland extent. Total inundated area derived from RADARSAT ScanSAR synthetic aperture radar images throughout 1999 and 2000 varied from 15 to 67 percent of the 471 km2 watershed. The hydrological system becomes disconnected within 2 weeks of snowmelt, and overland flow largely ceases. End-of-winter snow water equivalent and discharge during the melt period for 1999, 2000, and 2001 were used to estimate that between 30 and 37 mm (24-42 percent) of snow meltwater serves to recharge the evaporation deficit of the previous summer. The percent of snowmelt entering storage is dependent on the available surface storage. [ABSTRACT FROM AUTHOR]

This study investigates the backscattering properties of C-band RADARSAT (SAR) signal over sloping mountainous areas, and evaluates the utility of RADARSAT in natural disaster areas (e.g., forest fires), geological mapping, monitoring of natural hazards, natural and associated Earths environmental changes. Conventional change detection techniques in remote sensing are adequate for most applications. However, the changes in backscattering coefficients (σ0) before and after, for example, forest fires are not apparent in certain cases, mainly because of the effects of steeply sloping target scattering surface areas. The slopes of a mountainous test site can be divided into two cases with respect to the incident SAR signal look direction: the front and back slopes, where local incidence angles can vary significantly. Depending on the slope of the scattering surface, the backscattering coefficient increases to the maximum of 3.3. dB in the front-slope, but decreases 4.5 dB in back-slope after forest fires. Forest fire burnt areas provide a good example of a natural sloping scattering surface, which exhibits subtle changes in backscattering coefficients similar to the lithological changes in nature. The April 2000 forest fire in Kangwon province, Korea, burned for several weeks and was one of the worst ones in recent years. Among several firedamaged sites, an area near Samchuk city was investigated in detail with a set of multi-temporal RADARSAT Synthetic Aperture Radar (SAR) data to estimate the fire damages as compared to the unburnt background. [ABSTRACT FROM AUTHOR]

This study quantified relationships between forest composition and flooding gradients on the Roanoke River floodplain, North Carolina. Because flooding is highly variable in time and space, the research was designed to determine the specific hydrological parameters that control woody species abundance on the landscape scale. I specifically tested the importance of spring vs. yearly flood duration, as well as flood duration during hydrologically wet vs. dry years. Field vegetation samples of woody species composition were integrated with spatial data from a Landsat Thematic Mapper (TM) classification and a flood simulation model derived in part from synthetic aperture radar (SAR) imagery. Flood simulations were output and summarized for the periods 1912–1950 (before dams were constructed on the river) and 1965–1996 (after all of the dams were completed). Tenth percentile (dry), median, and 90th percentile (wet) hydroperiod (flood duration) regimes were generated for the spring and year, both pre- and post-dam. Detrended correspondence analysis (DCA) was used to ordinate the plot data, and correlation/regression between ordination axis scores and the flood variables were used to explore the relationships between flooding and species composition. Nineteenth percentile hydroperiod (i.e., wet conditions) correlated most strongly with DCA axis 1 ( r>0.9), indicating that inundation during extremely wet years strongly controls species composition on the floodplain. The results were used to quantitatively determine the niche width for both species and mapped vegetation classes in terms of number of days flooded annually and during the spring growth period. The results suggest that spring hydroperiod is an important mechanism that may drive competitive sorting along the flooding gradient, especially during the early years of succession (i.e., pre-dam, which represents the period during which most of the forests sampled were established), and that annual hydroperiod affects the relative dominance of species as the forests mature. [ABSTRACT FROM AUTHOR]

Space-borne Synthetic Aperture Radar (SAR) techniques have recently become one of the most flexible and cost-effective Earth-observation tools for monitoring surface processes, including natural hazard monitoring and management tasks such as landslides, volcanic activities, and earthquake-related problems. This study investigates the feasibility of applying space-borne SAR interferometry to the monitoring of earthquake hazards and investigation of the earthquake-related tectonic processes, focusing on the investigation of the geological setting and associated tectonic processes in the Nahanni Earthquake area, NWT, Canada. Investigation of seismotectonics in the Nahanni area was carried out in two stages: traditional analysis of remote-sensing data, including both optical and microwave data, for static aspects of tectonic processes (Moon et al., 1991); and new SAR interferometry using RADARSAT, ERS-1/2, and JERS-1 SAR data to study relative movements of several active geological tectonic blocks. Preliminary results indicate that (1) conventional geological remote-sensing methods provide us with important basic information on the tectonic setting associated with local earthquake activities, including several newly discovered structural features, and remain important as Earth-observation tools, (2) the newly discovered tectonic features correlate well with the earthquake focal plane solutions obtained from teleseismic data, (3) multi-temporal SAR interferometric (or differential InSAR) analysis can provide us with detailed tectonic moeements and understanding of the earthquake processes in the study area, but (4) availability of suitable space-borne SAR data suitable for differential SAR interferometry may pose more problems than the technical development. [ABSTRACT FROM AUTHOR]

A novel empirical approach to categorize oil slicks' sea surface expressions in synthetic aperture radar (SAR) measurements into oil seeps or oil spills is investigated, contributing both to academic remote sensing research and to practical applications for the petroleum industry. We use linear discriminant analysis (LDA) to try accuracy improvements from our previously published methods of discriminating seeps from spills that achieved ~70% of overall accuracy. Analyzing 244 RADARSAT-2 scenes containing 4562 slicks observed in Campeche Bay (Gulf of Mexico), our exploratory data analysis evaluates the impact of 61 combinations of SAR backscatter coefficients (σ°, β°, γ°), SAR calibrated products (received radar beam given in amplitude or decibel, with or without a despeckle filter), and data transformations (none, cube root, log10). The LDA ability to discriminate the oil-slick category is rather independent of backscatter coefficients and calibrated products, but influenced by data transformations. The combination of attributes plays a role in the discrimination; combining oil-slicks' size and SAR information is more effective. We have simplified our analyses using fewer attributes to reach accuracies comparable to those of our earlier studies, and we suggest using other multivariate data analyses—cubist or random forest—to attempt to further improve oil-slick category discrimination. [ABSTRACT FROM AUTHOR]

Mariners navigating within Canadian waters rely on Canadian Hydrographic Service (CHS) navigational charts to safely reach their destinations. To fulfil this need, CHS charts must accurately reflect the current state of Canadian coastal regions. While many coastal regions are stable, others are dynamic and require frequent updates. In order to ensure that important and potentially dangerous changes are reflected in CHS products, the organization, in partnership with the Canadian Space Agency, is exploring coastal change detection through satellite remote sensing (SRS). In this work, CHS examined a hybrid shoreline extraction approach which uses both Synthetic Aperture Radar (SAR) and optical data. The approach was applied for a section of the Mackenzie River, one of Canada's most dynamic river systems. The approach used RADARSAT-2 imagery as its primary information source, due to its high positioning accuracy (5 m horizontal accuracy) and ability to allow for low and high water line charting. Landsat represented the primary optical data source due to its long historical record of Earth observation data. Additional sensors, such as Sentinel-2 and WorldView, were also used where a higher resolution was required. The shoreline extraction process is based on an image segmentation approach that uses both the radar and optical data. Critical information was collected using the automated approach to support chart updates, resulting in reductions to the financial, human and time factors present within the ship-based hydrographic survey techniques traditionally used for chart improvements. The results demonstrate the potential benefit of wide area SRS change detection within dynamic waterways for navigational chart improvements. The work also demonstrates that the approach developed for RADARSAT-2 could be implemented with data from the forthcoming RADARSAT Constellation Mission (RCM), which is critical to ensure project continuity. [ABSTRACT FROM AUTHOR]

Our research focuses on refining the ability to discriminate two petrogenic oil-slick categories: the sea surface expression of naturally-occurring oil seeps and man-made oil spills. For that, a long-term RADARSAT-2 dataset (244 scenes imaged between 2008 and 2012) is analyzed to investigate oil slicks (4562) observed in the Gulf of Mexico (Campeche Bay, Mexico). As the scientific literature on the use of satellite-derived measurements to discriminate the oil-slick category is sparse, our research addresses this gap by extending our previous investigations aimed at discriminating seeps from spills. To reveal hidden traits of the available satellite information and to evaluate an existing Oil-Slick Discrimination Algorithm, distinct processing segments methodically inspect the data at several levels: input data repository, data transformation, attribute selection, and multivariate data analysis. Different attribute selection strategies similarly excel at the seep-spill differentiation. The combination of different Oil-Slick Information Descriptors presents comparable discrimination accuracies. Among 8 non-linear transformations, the Logarithm and Cube Root normalizations disclose the most effective discrimination power of almost 70%. Our refined analysis corroborates and consolidates our earlier findings, providing a firmer basis and useful accuracies of the seep-spill discrimination practice using information acquired with space-borne surveillance systems based on Synthetic Aperture Radars. [ABSTRACT FROM AUTHOR]

This study aims to detect coastline changes using temporal synthetic aperture radar (SAR) images for the state of Kelantan, Malaysia. Two active images, namely, RADARSAT-1 captured in 2003 and RADARSAT-2 captured in 2014, were used to monitor such changes. We applied noise removal and edge detection filtering on RADARSAT images for preprocessing to remove salt and pepper distortion. Different segmentation analyses were also applied to the filtered images. Firstly, multiresolution segmentation, maximum spectral difference and chessboard segmentation were performed to separate land pixels from ocean ones. Next, the Taguchi method was used to optimise segmentation parameters. Subsequently, a support vector machine algorithm was applied on the optimised segments to classify shorelines with an accuracy of 98% for both temporal images. Results were validated using a thematic map from the Department of Survey and Mapping of Malaysia. The change detection showed an average difference in the shoreline of 12.5 m between 2003 and 2014. The methods developed in this study demonstrate the ability of active SAR sensors to map and detect shoreline changes, especially during low or high tides in tropical regions where passive sensor imagery is often masked by clouds. [ABSTRACT FROM AUTHOR]

Mapping the historical occurrence of flood water in time and space provides information that can be used to help mitigate damage from future flood events. In Canada, flood mapping has been performed mainly from RADARSAT imagery in near real-time to enhance situational awareness during an emergency, and more recently from Landsat to examine historical surface water dynamics from the mid-1980s to present. Here, we seek to integrate the two data sources for both operational and historical flood mapping. A main challenge of a multi-sensor approach is ensuring consistency between surface water mapped from sensors that fundamentally interact with the target differently, particularly in areas of flooded vegetation. In addition, automation of workflows that previously relied on manual interpretation is increasingly needed due to large data volumes contained within satellite image archives. Despite differences between data received from both sensors, common approaches to surface water and flooded vegetation mapping including multi-channel classification and region growing can be applied with sensor-specific adaptations for each. Historical open water maps from 202 Landsat scenes spanning the years 1985–2016 generated previously were enhanced to improve flooded vegetation mapping along the Saint John River in New Brunswick, Canada. Open water and flooded vegetation maps were created over the same region from 181 RADARSAT 1 and 2 scenes acquired between 2003–2016. Comparisons of maps from different sensors and hydrometric data were performed to examine consistency and robustness of products derived from different sensors. Simulations reveal that the methodology used to map open water from dual-pol RADARSAT 2 is insensitive to up to about 20% training error. Landsat depicts open water inundation well, while flooded vegetation can be reliably mapped in leaf-off conditions. RADARSAT mapped approximately 8% less open water area than Landsat and 0.5% more flooded vegetation, while the combined area of open water and flooded vegetation agreed to within 0.2% between sensors. Derived historical products depicting inundation frequency and trends were also generated from each sensor’s time-series of surface water maps and compared. [ABSTRACT FROM AUTHOR]