Search

A lithium fluoride crystal slab was irradiated in air with a proton beam of nominal 7 MeV energy at a linear accelerator that is under development at ENEA C.R. Frascati. The irradiation generated a spatial distribution of stable colour centres in the crystal that could be detected as a luminescent image under blue-light excitation in a fluorescence microscope. The reconstruction of the whole Bragg curve from the luminescent image is here demonstrated for the first time by taking into account finite proton-energy bandwidth and saturation of defect concentration due to high absorbed dose. The obtained results confirm lithium fluoride detectors based on visible photoluminescence of radiation-induced aggregate colour centres as reliable candidate devices for advanced proton-beam diagnostics. [ABSTRACT FROM AUTHOR]

An innovative diamond detector layout is presented that is designed to operate at high temperature under intense neutron and gamma fluxes. It is made of a 500 μm “electronic grade” diamond film with 100 nm thick Ag metal contacts deposited onto each surface of the film by means of thermal evaporation. A thick layer of 6LiF has been deposited on top of one of the two Ag contacts to make the detector sensitive to thermal neutrons. The device was tested at the ISIS spallation neutron source (Rutherford Appleton Laboratory, UK) using the INES beam line. The detector was continuously irradiated for 100 hours in vacuum , exposed to a neutron flux of about 106 n cm−2 s−1 at a temperature . The aim of this experiment was to study the time dependence of the diamond detector performance while operating at high temperature under irradiation, providing a first experimental proof of reliable continuous operation for 100 hours at high temperature in a harsh environment. [ABSTRACT FROM AUTHOR]