Search

Nanomaterials based on Pd nanoparticles supported on Vulcan carbon (XC-72R) were prepared by the organometallic approach in one-pot and mild conditions (3 bar hydrogen and room temperature) using Pd(dba)2 (bis (dibenzylideneacetone) palladium (0)) as metal source and hexadecylamine (HDA) as stabilizer. High-resolution transmission electron microscopy (HR-TEM) evidenced the presence of well-dispersed Pd nanoparticles of ca. 4.5 nm mean size onto the carbon support (Pd/HDA/C). Scanning and transmission electron microscopy with electron energy loss spectroscopy (STEM-EELS) allowed to determine the chemical composition of the nanomaterials. When the Pd/HDA/C nanomaterial was submitted to heating treatment (ht) at 400 °C under air (referred as Pd/HDA/C@air-ht), X-ray photoelectron spectroscopy (XPS) and HR-TEM/STEM-EELS analyses suggested the presence of interactions between PdO and Pd(0) as a result of the formation of Pd@PdO core–shell nanoparticles. The highest oxidation current magnitude during methanol oxidation reaction is ascribed to the heat-treated material, linked with a better electron and mass transfer processes at the electrode interface. This can be attributed to electronic interactions at the core–shell formed, which might promote different redox processes at the electrode interface during CH3OH deprotonation in the alkaline electrolyte. [ABSTRACT FROM AUTHOR]

A series of ferrocenylphosphine-stabilized rhodium nanoparticles has been prepared in one pot from the organometallic [Rh(η3-C3H5)3] precursor. This complex has been decomposed by hydrogen treatment (3 bar) in dichloromethane in the presence of five different ferrocene-based phosphine ligands. Very small rhodium nanoparticles in the size range of 1.1–1.7 nm have been obtained. These nanoparticles have shown activity in a model catalytic reaction, namely the hydrogenation of styrene. These results evidence that the metal surface is not blocked despite the steric bulk of the stabilizing ligands. Moreover, certain selectivity has been observed depending on the ligand employed. To the best of our knowledge, such a type of compound has not yet been used for stabilizing metal nanoparticles and our findings highlight the interest to do so. [ABSTRACT FROM AUTHOR]

The synthesis of Rh nanoparticles has been performed through an organometallic approach starting from the tris(allyl) rhodium complex, Rh(η3-C3H5)3, as precursor and using an alcohol as both a solvent and a stabilizer, under mild reaction conditions (room temperature; 3 bar H2). The influence of the alcohol used, among methanol, propanol or heptanol, on the morphological and structural characteristics as well as on the magnetic and electrocatalytic properties of the obtained Rh nanoparticles has been investigated. Assemblies of Rh nanoparticles of various sizes have been observed depending on the alkyl chain length of the alcohol used. A noticeable effect of the nanostructured character of these Rh nanoparticles is the appearance of a ferromagnetic ordering at room temperature due to a modified electronic structure. Magnetic moments per atom were determined as follows: 0.099, 0.073 and 0.036 µB for methanol, heptanol and propanol, respectively. The electrochemical evaluation of these Rh nanoparticles on the oxygen reduction reaction (ORR) showed that the electroactivity depends on the chain length of the alcohol; thus, Rh-heptanol system displayed the highest electroactivity for ORR. [ABSTRACT FROM AUTHOR]

A porous Ru nanomaterial exhibits high electrocatalytic performance and excellent durability for the hydrogen evolution reaction (HER) under both acidic and neutral conditions. It displays a low overpotential of 83 mV at a current density of 10 mA cm−2 and an excellent durability up to 12 h in 0.5 M H2SO4. [ABSTRACT FROM AUTHOR]

The solution synthesis of rhodium nanoparticles (Rh NPs) was achieved from the organometallic complex [Rh(η3-C3H5)3] under mild reaction conditions in the presence of a polymer (PVP), a monophosphine (PPh3) and a diphosphine (dppb) as a stabilizer, leading to very small Rh NPs of 2.2, 1.3 and 1.7 nm mean size, with PVP, PPh3 and dppb, respectively. The surface properties of these nanoparticles were compared using a model catalysis reaction namely, hydrogenation of cyclohexene, first under colloidal conditions and then under supported conditions after their immobilization onto an amino functionalized silica-coated magnetite support. PVP-stabilized Rh NPs were the most active catalyst whatever the catalytic conditions as a result of a strong coordination of the phosphine ligands at the metal surface that blocks some surface atoms even after several recycles of the supported nanocatalysts and limit the reactivity of the metallic surface. [ABSTRACT FROM AUTHOR]

The synthesis and catalytic activity of long-chain NHC-stabilized RuNPs are presented. Full characterization of these novel nanostructures including surface state studies show that the ligand influences the number and the location of Ru active sites which impacts the NP catalytic activity, especially in hydrogenation reactions. The high stability and versatility of these nanosystems make them successful catalysts for both oxidation and hydrogenation reactions that can even be performed successively in a one pot-fashion. [ABSTRACT FROM AUTHOR]

The betaine adduct of N-heterocyclic carbene and carbodiimide (ICy·(p-tol)NCN) was found to be a very efficient ligand to prepare very small (1–1.3 nm) ruthenium nanoparticles (RuNPs). The coordination of the ligand on the metal surface takes place through the carbodiimide moiety. The resulting RuNPs led to decarbonylation of THF and showed size selectivity for styrene hydrogenation. [ABSTRACT FROM AUTHOR]

The reactivity of ruthenium nanoparticles stabilized by 4-(3-phenylpropyl)pyridine in hydrogen transfer and hydrogenation processes was monitored by NMR spectroscopy. Unsaturated substrates such as styrene, 4-vinylpyridine and 4-phenyl-but-3-en-2-one were used as model molecules to investigate the surface properties of nanoparticles by a combination of NMR studies. Interestingly, the hydrides present at the metallic surface after nanoparticles synthesis are selectively transferred to vinylic groups without reducing the aromatic rings, under dihydrogen-free atmosphere. DOSY and NOE NMR experiments permitted to propose a way of interaction of the organic compounds at the metallic surface. In particular, the coordination of the substrate could be evidenced for 4-vinylpyridine and 4-ethylpyridine but not for styrene derivatives. Graphical Abstract: Curved double arrows represent magnetization exchanges. Straight arrows represent adsorption/desorption phenomena. [Figure not available: see fulltext.] [ABSTRACT FROM AUTHOR]

Structural and spectroscopic properties of tetranuclear ruthenium hydrido clusters, and to a less extent, of hexanuclear ruthenium hydrido clusters, are investigated theoretically. Some of these (H)nRuk(L)m (k = 4, 6) clusters were experimentally synthesized and characterized. Non-existing structures are also considered in order to examine the role of ligands on their structure, vibrational spectra and 1HNMR chemical shifts. The calculated properties are found in very good agreement with experimental data, when available. Beyond the intrinsic interest elicited by transition metal clusters, these compounds are also considered in this paper as relevant to diamagnetic ruthenium nanoparticles as well as building blocks of hcp surfaces, which is the ruthenium nanoparticle lattice. On the basis of the very good agreement between experiments and theory, the structural and spectroscopic properties of several model clusters are also predicted in order to bring additional data which may help to analyze the spectral signature of ruthenium nanoparticles. A particular emphasis is put on 1H NMR, which is of high practical importance for characterizing the presence of hydrides in ruthenium clusters and nanoparticles. Several topics are discussed: the structural preference of surface hydrides for terminal-, edge-bridging or face-capping coordination modes, hydrides adsorption energies, the possible presence of interstitial hydrogen atoms, the dependence of 1H chemical shifts on ligands and on electron counting. [ABSTRACT FROM AUTHOR]