Search

Seven prestressed concrete bridge girders that had been in service for 42 years, and represented two span lengths and reinforcement designs, were tested to determine their effective prestress force and ultimate shear capacity. A cracking moment test was used to determine the effective prestress force in the girders. The measured effective prestress force was compared with calculated values according to the AASHTO LRFD prestress loss equations to investigate their adequacy. The AASHTO refined method was shown to provide the most accurate results to within 10% of the measured values. An ultimate shear test was also performed on two of the girders. An external load was applied near the support and increased until the girder failed in shear. The various procedures in the AASHTO LRFD specifications were compared with the measured results. The AASHTO simplified procedure predicted only 51% and 39% of the average measured shear capacity for the short and long span girders, respectively. The strut-and-tie models were found to estimate the shear capacity more accurately. The AASHTO refined method was shown to provide the most accurate results. [ABSTRACT FROM AUTHOR]

Sixteen shear capacity tests were performed on eight decommissioned AASHTO prestressed concrete girders that had been in service for over 42 years. These bridge members presented a unique opportunity to investigate carbon fiber-reinforced polymer (CFRP) retrofit schemes to enhance the shear capacity of underreinforced girders that were nonrectangular. Four destructive tests were performed to quantify the in-service strength of the girders and the remaining 12 tests were performed on CFRP retrofitted girders. In all, five configurations of the CFRP reinforcement were evaluated. Two anchoring techniques were investigated that either involved epoxying a horizontal CFRP strip over the vertical strips or a new methodology of epoxying a CFRP laminate into a groove over the vertical strips that was cut at the web-to-flange interface. Two methodologies that predicted the shear contribution of the carbon fiber reinforcement were compared with the test results. A carbon fiber-reinforcing scheme of vertical strips and horizontal anchorage strip was found to be the most effective in resisting the applied shear. [ABSTRACT FROM AUTHOR]