Search

The field of multifunctional energetics encompasses a range of materials including propellants, explosives, and pyrotechnics that possess the ability to be manipulated through various characteristics that can be switched between go and no-go, or those that have controllable energy release levels or have additional functions beyond energetic output. The development of multifunctional energetics harnessing electromechanical or piezoelectric properties of polymeric materials or binder systems has garnered increasing interest in recent years. Among polymers, fluoropolymers such as poly(vinylidene fluoride) (PVDF) and copolymers such as poly(vinylidene fluoride-trifluoroethylene) [P(VDF-TrFE)], which are used as the binder and oxidizer in the energetic formulations, have demonstrated the highest piezoelectric coefficients. In this study, we fabricated piezo-energetic composite films using aluminum nanopowders (10 wt. % active content) as fuel and P(VDF-TrFE) (70/30) as an oxidizer and investigated the piezoelectric response using a small-scale drop weight setup. Additionally, we employed a shaker setup to investigate the response of the films to vibrations. Our findings demonstrate that these piezo-energetic films can replicate the behavior of a commercial PVDF gauge at relatively low-pressure impacts, indicating their potential use as shock or pressure sensors in various fields, as well as an accelerometer gauge. Additionally, aging studies of up to one year indicated minimal loss in the energetic content of the created films, enabling the use of energetic gauges for an extended period. Our findings support the effectiveness of piezo-energetic composite films as pressure sensors or accelerometers and highlight their potential for energetic applications. [ABSTRACT FROM AUTHOR]

Electroactivity of polymers used in energetic materials may result in charge separation that could result in safety concerns (unintentional ignition) or be exploited for multifunctional applications. We measured the flexoelectric properties of several polymers and energetic composites including poly(vinylidene fluoride-co-trifluoroethylene) [P(VDF-TrFE)], nanosized aluminum (nAl)/P(VDF-TrFE), poly(vinylidene fluoride-co-hexafluoropropylene) [P(VDF-HFP)], micron aluminum (μAl)/P(VDF-HFP), hydroxyl-terminated polybutadiene (HTPB), ammonium perchlorate (AP)/HTPB, μAl/AP/HTPB, polytetrafluoroethylene (PTFE), and polydimethylsiloxane (PDMS). The presence of flexoelectricity in PTFE (Teflon®) and the relatively high flexoelectric coefficient of P(VDF-HFP) (Viton®) measured in this work may help explain accidents involving the production and use of Magnesium-Teflon-Viton (MTV) that in many instances have been attributed to electro-static discharge. The addition of aluminum nanopowders to the P(VDF-TrFE) increased the flexoelectric coefficient by ∼30%. However, the addition of aluminum micrometer particles (10 wt. %) to P(VDF-HFP) decreased the effective flexoelectric coefficient, while an increase was observed when the aluminum loading was increased from 10 to 20 wt. %. The effective flexoelectric coefficient of HTPB and two propellant compositions (AP/HTPB and μAl/AP/HTPB) were measured to be in the same range as each other. The effect of particle addition (nAl, μAl, and AP) on flexoelectricity was different depending on the binder, further illustrating the complexity of flexoelectric properties in composite energetics. This may be somewhat explained by competing effects where particle additions (nAl, μAl, and AP) create additional strain gradients that contribute to flexoelectricity, but the particle additions also replace the mass of flexoelectric polymer binders (P(VDF-TrFE, P(VDF-HFP), and HTPB) with particles (nAl, μAl, and AP) that are less flexoelectric. [ABSTRACT FROM AUTHOR]