Search

While "ears-and-eyes" and "mouthpieces" are two normative roles of Chinese journalists, the latter has long been more emphasized in the mobilization model of disaster reporting. Based on in-depth interviews with Chinese journalists who witnessed city lockdowns during the COVID-19 pandemic, this study examines how they performed the two roles to determine the extent to which their witnessing experiences could be transformed into media discourses. It argues that journalists' bearing witness on disaster sites presupposed not only eyewitnessing but also earwitnessing in the form of survivor interviewing, fact checking, and truth investigation. While the "mouthpiece" orientation of news media may have obscured the potential of journalistic witnessing for timely exposing public suffering, there existed journalist-media negotiations on performing the two roles. Highlighting the role asymmetry between "ears-and-eyes" and "mouthpieces", this study examines the veracity gap in Chinese journalists' witnessing practice that derives from the tension between journalistic autonomy and structural restraints, which may contribute to the further theorization of journalistic witnessing. [ABSTRACT FROM AUTHOR]

The objective of this study was to evaluate the effect of skill modifications on head motion experienced during women's artistic gymnastics skills. Nine gymnasts (four beginner and five advanced) completed three trials of up to 24 skill progressions, each consisting of a skill and two progressive safety modifications. Gymnasts were instrumented with mouthpiece sensors embedded with an accelerometer and gyroscope collecting motion data at 200, 300, and 500 Hz during each skill performance. Peak-to-peak linear and rotational kinematics during contact phases and peak rotational kinematics during non-contact phases were computed. A mixed-effects model was used to compare differences in modification status nested within skill categories. Timer skills (i.e. drills that simulate performance of a gymnastics skill) resulted in the highest median ΔLA and ΔRA of all skill categories, and 132 skill performances exceeded 10 g ΔLA during a contact phase. Modifications were associated with significant reductions in head kinematics during contact phases of timers, floor skills, bar releases, and vault skills. Gymnasts can be exposed to direct and indirect head accelerations at magnitudes consistent with other youth contact sports, and common safety modifications may be effective at reducing head motion during contact and non-contact phases of gymnastics skills. [ABSTRACT FROM AUTHOR]

Research assessing the effects of mouthpieces on an individual's aerobic, anaerobic, or muscular performance have attributed cited improvements to the participant's ability to jaw clench. Jaw clenching research finds positive outcomes with the task of jaw clenching with targeted muscle groups in a controlled laboratory setting. Thus, the study's goal was to determine if the addition of a mouthpiece would positively affect performance outcomes in a field-based whole-body muscle movement. Fourteen participants (8=F and 6=M) NCAA softball and baseball athletes completed 5 maximal bat swings with and without a mouthpiece in 4 conditions: no jaw clenching (NC), mouthpiece and jaw clenching (MP+C), mouthpiece only (MP), and jaw clenching only (C). Significant differences occurred in conditions, with the highest velocity noted in the combined condition of MP+C (71.9 mph) as compared to NC (67.9 mph), MP (68.6 mph), and C (70.9 mph). A repeated measures ANOVA demonstrated significant differences with bat swing velocity (F = 13.19, df 3, p < 0.0001). Pairwise comparisons revealed significant differences in MP+C with MP (p = 0.007); MP+C with NC (p = 0.001), and C with NC (p = 0.009). The results of this study provide evidence of jaw clenching's positive effects on the dynamic, whole-body explosive activity of a bat swing. [ABSTRACT FROM AUTHOR]

Soccer players are regularly exposed to head impacts by intentionally heading the ball. Evidence suggests repetitive subconcussive head impacts may affect the brain, and females may be more vulnerable to brain injury than males. This study aimed to characterize head impact exposure among National Collegiate Athletic Association women's soccer players using a previously validated mouthpiece-based sensor. Sixteen players were instrumented during 72 practices and 24 games. Head impact rate and rate of risk-weighted cumulative exposure were compared across session type and player position. Head kinematics were compared across session type, impact type, player position, impact location, and ball delivery method. Players experienced a mean (95% confidence interval) head impact rate of 0.468 (0.289 to 0.647) head impacts per hour, and exposure rates varied by session type and player position. Headers accounted for 89% of head impacts and were associated with higher linear accelerations and relational accelerations than nonheader impacts. Headers in which the ball was delivered by a long kick had greater peak kinematics (all P<.001) than headers in which the ball was delivered by any other method. Results provide increased understanding of head impact frequency and magnitude in women's collegiate soccer and may help inform efforts to prevent brain injury. [ABSTRACT FROM AUTHOR]

Blood oxygen saturation (SpO2) is an essential indicator of a patient's general condition. However, conventional measurement methods have some issues such as time delay and interference by ambient light. Improved measurement methods must be developed, and there are no reports on intraoral measurements of SpO2 using wearable devices. Therefore, we aimed to establish an intraoral SpO2 measurement method for the first time. Twelve healthy adults participated in this study. The following steps were taken: (1) to identify the optimal measurement location, mid-perfusion index (PI) values were measured at six places on the mucosa of the maxilla, (2) to validate the optimal measurement pressure, PI values were obtained at different pressures, and (3) using the proposed mouthpiece device, SpO2 values in the oral cavity and on the finger were analyzed during breath-holding. The highest PI values were observed in the palatal gingiva of the maxillary canine teeth, with high PI values at pressures ranging from 0.3 to 0.8 N. In addition, changes in SpO2 were detected approximately 7 s faster in the oral cavity than those on the finger, which is attributed to their proximity to the heart. This study demonstrates the advantage of the oral cavity for acquiring biological information using a novel device. [ABSTRACT FROM AUTHOR]

The errors on the stopping power ratio (SPR) of mouthpiece samples from ERKODENT were evaluated. Erkoflex and Erkoloc‐pro from ERKODENT and samples that combined Erkoflex and Erkoloc‐pro were computed tomography (CT)‐scanned using head and neck (HN) protocol at the East Japan Heavy Ion Center (EJHIC), and the values were averaged to obtain the CT number. The integral depth dose of the Bragg curve with and without these samples was measured for 292.1, 180.9, and 118.8 MeV/u of the carbon‐ion pencil beam using an ionization chamber with concentric electrodes at the horizontal port of the EJHIC. The average value of the water equivalent length (WEL) of each sample was obtained from the difference between the range of the Bragg curve and the thickness of the sample. To calculate the difference between the theoretical and measured values, the theoretical CT number and SPR value of the sample were calculated using the stoichiometric calibration method. Compared with the Hounsfield unit (HU)‐SPR calibration curve used at the EJHIC, the SPR error on each measured and theoretical value was calculated. The WEL value of the mouthpiece sample had an error of approximately 3.5% in the HU‐SPR calibration curve. From this error, it was evaluated that for a mouthpiece with a thickness of 10 mm, a beam range error of approximately 0.4 mm can occur, and for a mouthpiece with a thickness of 30 mm, a beam range error of approximately 1 mm can occur. For a beam passing through the mouthpiece in HN treatment, it would be practical to consider a mouthpiece margin of 1 mm to avoid beam range errors if ions pass through the mouthpiece. [ABSTRACT FROM AUTHOR]

Brass instruments mouthpieces have been historically built using metal materials, usually brass. With the auge of additive manufacturing technologies new possibilities have arisen, both for testing alternative designs and for using new materials. This work assesses the use of polymers for manufacturing trombone mouthpieces, specifically PLA and Nylon. The acoustical behavior of these two mouthpieces has been compared with the obtained from a third one, built from brass. Both additive and subtractive manufacturing techniques were used, and the whole manufacturing process is described. The mouthpieces were acoustically assessed in an anechoic chamber with the collaboration of a professional performer. The harmonic analysis confirmed that all the manufactured mouthpieces respect the harmonic behavior of the instrument. An energy analysis of the harmonics revealed slight differences between the mouthpieces, which implies differences in the timbre of the instrument. Although these subtle differences would not be acceptable when performing with the instrument in an orchestra, they could be perfectly valid for early learners, personal rehearsals or any kind of alternative performance. [ABSTRACT FROM AUTHOR]

Work-related exposures affecting oral health are important factors of morbidity and decreased quality of life, which may emerge from numerous physical, chemical, or mental occupational exposures. Copper (Cu) is an important trace element, however, it may also cause allergies, depose and accumulate in the body, leading to acute and chronic toxicity. In the present report, we describe a rare phenomenon found during the examination of two professional brass players, after incidentally noting an artefact during magnetic resonance imaging (MRI) scans, which were performed to monitor bone healing after bone augmentation procedures in an unrelated clinical study. During a detailed workup of patient characteristics, data on medical history, lifestyle, professional habits related to playing the instrument, and oral health status were collected. Overall, both patients presented with similar histories, and the differences from the context of this study were not relevant; however, both brass players were using an uncoated Cu mouthpiece for over 15 years. Based on the imaging findings (a shadow in the area of the lips on the MRI images) and the organoleptic evaluation of the lips and mucosa of the individuals (temporary faint green discoloration), it is most likely that the brass players were affected by oxidized Cu accumulation in the lip. In contrast to several professions, musicians are usually not required by law to attend obligatory occupational health check-ups, which may facilitate the occurrence of such exposures in musicians. Clinicians should be on the lookout for brass players involved in the profession for a long time, who may have used the mouthpieces for an extended period of time, in addition to musicians affected by Wilson's disease. In patients affected by this phenomenon, diagnostics of oral cancer and prosthodontic procedures may be cumbersome, due to the detrimental impact on the utility of MRI imaging from artefact-formation and scattering. [ABSTRACT FROM AUTHOR]

Copyright of RAST Musicology Journal / Rast Muzikoloji Dergisi is the property of RAST Musicology Journal and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Purpose: The mouthpiece is the standard interface for spirometry tests. Although the use of a mouthpiece can be challenging for patients with orofacial weakness, maintaining a proper seal with a facemask can be an issue for healthy individuals during forceful efforts. We compared respiratory muscle activity and tests using a mouthpiece and facemask in healthy adults to investigate whether they can be used interchangeably. Methods: In this observational study, subjects (n = 12) completed forced vital capacity, maximal respiratory pressure, and peak cough flow with a mouthpiece and facemask. Root mean square values of the genioglossus, diaphragm, scalene, and sternocleidomastoid were compared between conditions. Results: When switching from a mouthpiece to a facemask, significantly higher values were seen for peak cough flow (average bias = -54.36 L/min, P <.05) and the difference seen with maximal expiratory pressure (MEP) and maximal inspiratory pressure (MIP) were clinically significant (average bias: MEP = 27.33, MIP = -5.2). In addition, the submental activity was significantly greater when MIP was conducted with a mouthpiece. No significant differences were seen in respiratory muscle activity during resting breathing or spirometry. Conclusions: There are clinically significant differences with cough and MEP tests, and neck muscles are activated differently based on interface. Considering the small sample size, our findings suggest a facemask may be used to complete some pulmonary function tests. [ABSTRACT FROM AUTHOR]

Purpose: We investigated the immobilization accuracy of a new type of thermoplastic mask—the Double Shell Positioning System (DSPS)—in terms of geometry and dose delivery. Methods: Thirty‐one consecutive patients with 1–5 brain metastases treated with stereotactic radiotherapy (SRT) were selected and divided into two groups. Patients were divided into two groups. One group of patients was immobilized by the DSPS (n = 9). Another group of patients was immobilized by a combination of the DSPS and a mouthpiece (n = 22). Patient repositioning was performed with cone beam computed tomography (CBCT) and six‐degree of freedom couch. Additionally, CBCT images were acquired before and after treatment. Registration errors were analyzed with off‐line review. The inter‐ and intrafractional setup errors, and planning target volume (PTV) margin were also calculated. Delivered doses were calculated by shifting the isocenter according to inter‐ and intrafractional setup errors. Dose differences of GTV D99% were compared between planned and delivered doses against the modified PTV margin of 1 mm. Results: Interfractional setup errors associated with the mouthpiece group were significantly smaller than the translation errors in another group (p = 0.03). Intrafractional setup errors for the two groups were almost the same in all directions. PTV margins were 0.89 mm, 0.75 mm, and 0.90 mm for the DSPS combined with the mouthpiece in lateral, vertical, and longitudinal directions, respectively. Similarly, PTV margins were 1.20 mm, 0.72 mm, and 1.37 mm for the DSPS in the lateral, vertical, and longitudinal directions, respectively. Dose differences between planned and delivered doses were small enough to be within 1% for both groups. Conclusions: The geometric and dosimetric assessments revealed that the DSPS provides sufficient immobilization accuracy. Higher accuracy can be expected when the immobilization is combined with the use of a mouthpiece. [ABSTRACT FROM AUTHOR]

Several case studies and anecdotal reports have shown assorted motor and quality of life benefits from use of a dental mouthpiece among people with Parkinson disease (PD). A larger exploratory study is necessary to assess potential efficacy and feasibility of this treatment strategy. If shown to be effective and feasible in a larger sample of people with PD, mechanistic studies may be warranted to examine a potential relationship between orofacial sensory input and motor function in people with PD. This study was registered on clinicaltrials.gov (NCT: 04082663). Twenty people with PD, Hoehn and Yahr stages I-III, participated in this study. Each participant completed various baseline motor and quality of life assessments before being fitted with a custom mouthpiece. Motor assessments were completed a second time after 25 min of mouthpiece wear. Participants were asked to wear the mouthpiece for 1 month before completing follow-up quality of life assessments and providing feedback about the mouthpiece. Wilcoxon signed-rank tests were used to compare results across conditions. Gait velocity and cadence showed significant (p <.05) improvement while wearing the mouthpiece. However, these changes were not significant after correcting for multiple comparisons. Thirteen participants indicated they would be unlikely to continue wearing the mouthpiece. These results do not provide adequate evidence to pursue further this type of mouthpiece as a treatment strategy for motor signs and symptoms or quality of life in people with PD. [ABSTRACT FROM AUTHOR]

Background and Aim: Discomfort associated with the gag reflex during transoral endoscopy can be troublesome. To overcome this problem during esophagogastroduodenoscopy (EGD), we recently developed a novel mouthpiece. The aim of the present study was to compare acceptance and tolerability of transoral EGD with conventional and new mouthpieces in unsedated patients and analyze the effects of the new mouthpiece. Methods: This study consisted of two phases of cephalometric and EGD examinations to analyze the effects of the new mouthpiece. Cephalometry was carried out in six subjects to evaluate differences in the size of the pharynx (anteroposterior diameter of the oropharynx and longitudinal diameter of the oral cavity) when subjects held the conventional mouthpiece (MAJ674) or the new mouthpiece in their mouths. EGD was done in 10 subjects using the conventional or new mouthpiece to evaluate the number of times the gag reflex occurred, examinee discomfort, and endoscope operability during EGD using a visual analogue scale (VAS). Results: Anteroposterior diameter of the oropharynx and longitudinal diameter of the oral cavity were significantly larger with the new mouthpiece than with the conventional mouthpiece (oropharynx: P = 0.03; oral cavity: P = 0.03). With the new mouthpiece during EGD, subjects had significantly fewer instances of the gag reflex (P = 0.01); VAS score for discomfort was significantly lower (P < 0.01) and score for endoscope operability was significantly higher (P = 0.04). Conclusion: The new mouthpiece we developed reduced the gag reflex during EGD by extending the pharynx, thus decreasing examinee discomfort and increasing endoscopic operability. [ABSTRACT FROM AUTHOR]

While many research efforts have focused on head impact exposure in professional soccer, there have been few studies characterizing exposure at the youth level. The aim of this study is to evaluate a new instrumentation approach and collect some of the first head impact exposure data for youth female soccer players. Athletes were instrumented with custom-fit mouthpieces that measure head impacts. Detailed video analysis was conducted to identify characteristics describing impact source (e.g., kick, header, throw). A total of 763 verified head impacts were collected over 23 practices and 8 games from 7 athletes. The median peak linear accelerations, rotational velocities, and rotational accelerations of all impacts were 9.4 g, 4.1 rad/s, and 689 rad/s2, respectively. Pairwise comparisons resulted in statistically significant differences in kinematics by impact source. Headers following a kicked ball had the highest accelerations and velocity when compared to headers from thrown or another header. [ABSTRACT FROM AUTHOR]

Background: It is essential to understand, characterize, and measure the embouchure mechanism of a wind instrumentalists, where the applied forces on the perioral tissues can usually promote discomfort or pain. Methods: The sample consisted of five clarinet players and five saxophone players. The embouchure force measurements at the lower lip area were assessed using a piezoresistive sensor (FlexiForceTM, Tekscan, Boston, USA, 0.07 kgf/cm2) placed on the lower part of the mouthpiece of the single reed instrument. Furthermore, each participant performed three times three different notes at different pitches: high, medium, and low. An intraoral device was manufactured in order to dissipate the existing pressures. Results: The piezoresistive sensors applied to the mouthpiece of the five clarinetists presented values between 16 and 226 g of force. In the case of the five saxophonists, the values registered were between 5 and 320 g of force. Conclusions: Piezoresistive sensors are a valid option to characterize that single reed instrumentalists apply substantial forces at the lower lip that can be equivalent to medium orthodontic forces. The implementation of the Lip Pressure Appliance can be a valid solution on the prevention of eventual lesions resulting from the embouchure forces. [ABSTRACT FROM AUTHOR]

The objective of this study was to develop a mouthpiece sensor with improved head kinematic measurement for use in non-helmeted and helmeted sports through laboratory validation and pilot field deployment in female youth soccer. For laboratory validation, data from the mouthpiece sensor was compared to standard sensors mounted in a headform at the center of gravity as the headform was struck with a swinging pendulum. Linear regression between peak kinematics measured from the mouthpiece and headform showed strong correlation, with r2 values of 0.95 (slope = 1.02) for linear acceleration, 1.00 (slope = 1.00) for angular velocity, and 0.97 (slope = 0.96) for angular acceleration. In field deployment, mouthpiece data were collected from four female youth soccer players and time-synchronized with film. Film-verified events (n = 915) were observed over 9 practices and 5 games, and 632 were matched to a corresponding mouthpiece event. This resulted in an overall sensitivity of 69.2% and a positive predictive value of 80.3%. This validation and pilot field deployment data demonstrates that the mouthpiece provides highly accurate measurement of on-field head impact data that can be used to further study the effects of impact exposure in both helmeted and non-helmeted sports. [ABSTRACT FROM AUTHOR]

Copyright of Turkiye Klinikleri Journal of Sports Sciences is the property of Turkiye Klinikleri and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Purpose: Intraoperative transcranial motor-evoked potential monitoring causes contraction of the masseter muscles, which may cause injuries to the oral cavity and damage to the orotracheal tube. We developed a mouthpiece made from vinyl-silicone impression material to prevent these injuries. The purpose of this study was to examine its efficacy and safety. Methods: Twenty-two patients undergoing spinal surgery under transcranial motor-evoked potential monitoring were fitted with bespoke vinyl-silicone mouthpieces by dentists before surgery. On induction of general anesthesia and orotracheal intubation, the mouthpiece was attached to the upper and lower dental arches. A lateral cervical X-ray was taken at the end of surgery to examine the condition of the orotracheal tube. The incidence of endotracheal tube deformation was compared with an historic control group of 20 patients in whom a conventional gauze bite block had been previously used before induction of the mouthpiece. The oral cavity was examined by a dentist the day before surgery and 3 days postoperatively, and intraoral injuries were recorded. Results: No endotracheal tube deformation was found in 22 patients fitted with the new mouthpiece. The incidence of tube deformation (none of 22 patients, 0 %) was significantly lower than in those who had been fitted with the gauze bite block (9 of 20 patients, 45.0 %; p < 0.001). Application of the mouthpiece resulted in no tongue or tooth injuries. Conclusion: A novel mouthpiece reduced the incidence of damage to the endotracheal tube caused by intraoperative transcranial motor-evoked potential monitoring. [ABSTRACT FROM AUTHOR]

Although diver's mouth syndrome (DMS) has long been recognized by scuba divers, little attention has been paid to the influence of wearing a scuba diving mouthpiece on the stomatognathic system. In this review, DMS-related stomatognathic events (DMS-SE) while wearing a mouthpiece, the relationship between components of the mouthpiece and those events, and design considerations to reduce the risk of those events are discussed based on evidence from 32 articles concerning scuba diving mouthpieces. Forward movement of the mandible, loss of molar occlusal support, and continuous jaw clenching while wearing a mouthpiece are considered to be pathogenic for DMS-SE. Several experimental studies have suggested a relationship between incidence of those events and the design of mouthpiece components such as the connector, labial flange, platform, and occlusal rug, and the possibility of reducing risk of those events through design customization of these components. Improvement of the shape of commercially available mouthpieces and creation of custom-made mouthpieces may thus contribute to the prevention and treatment of DMS-SE and the provision of a comfortable diving environment. [ABSTRACT FROM AUTHOR]

Mouthpiece ventilation (MPV) allows patients with neuromuscular disease to receive daytime support from a portable ventilator, which they can disconnect at will, for example, for speaking, eating, swallowing, and coughing. However, MPV carries a risk of underventilation. Our purpose here was to evaluate the effectiveness of daytime MPV under real-life conditions. Eight wheelchair-bound patients who used MPV underwent daytime polygraphy at home with recordings of airflow, mouthpiece pressure, thoracic and abdominal movements, peripheral capillary oxygen saturation (SpO2), and transcutaneous partial pressure of carbon dioxide (PtcCO2). Times and durations of tasks and activities were recorded. The Apnea–Hypopnea Index (AHI) was computed. Patient–ventilator disconnections ≥3 minutes and episodes of hypoventilation defined as PtcCO2>45 mmHg were counted. Patient–ventilator asynchrony events were analyzed. The AHI was >5 hour−1 in two patients. Another patient experienced unexplained 3% drops in arterial oxygen saturations at a frequency of 70 hour−1. Patient–ventilator disconnections ≥3 minutes occurred in seven of eight patients and were consistently associated with decreases in SpO2 and ≥5-mmHg increases in PtcCO2; PtcCO2 rose above 45 mmHg in two patients during these disconnections. The most common type of patient–ventilator asynchrony was ineffective effort. This study confirms that MPV can be effective as long as the patient remains connected to the mouthpiece. However, transient arterial oxygen desaturation and hypercapnia due to disconnection from the ventilator may occur, without inducing unpleasant sensations in the patients. Therefore, an external warning system based on a minimal acceptable value of minute ventilation would probably be useful. [ABSTRACT FROM AUTHOR]

Transoral robotic surgery (TORS), performed with the da Vinci surgical system (da Vinci), has been classified as a surgical approach for benign and malignant lesions of the oral cavity and laryngopharynx. It provides several unique advantages, which include a three-dimensional magnified view, ability to see and work around curves or angles, and the availability of two or three robotic arms. At present, however, the da Vinci surgical system does not provide haptic feedback. The potential risks specific to the transoral use of the da Vinci include tooth injury, mucosal laceration, ocular injury, and mandibular fracture. To prevent such intra-operative tooth injuries, we created a mouthpiece made of polyethylene terephthalate glycol (PETG) individually shaped for the patient's teeth. We compared the safety and efficacy of the PETG mouthpiece with those of a conventional mouthpiece made of ethylene-vinyl acetate (EVA). To determine the difference in tooth injury resulting from the two types of mouthpiece, we constructed an experimental system to measure load and strain. We measured the dynamic load and the strain from the rod to the tooth using the PETG and EVA mouthpiece. The rod was pressed against the tooth model outfitted with two types of mouthpiece and the dynamic load was measured with a load cell and the strain with a strain gage. The maximum dynamic load was 1.29 ± 0.03 kgf for the PETG mouthpiece and 2.24 ± 0.05 kgf for the EVA mouthpiece. The load against the tooth was thus less for the EVA mouthpiece. The strain was −166.84 ± 3.94 and 48.24 ± 7.77 με, respectively, while the load direction was parallel to that of the tooth axis for the PETG mouthpiece and perpendicular to the tooth axis for the EVA mouthpiece. The PETG mouthpiece reduced the tooth load compared with the EVA mouthpiece and the load direction was in parallel to the tooth axis. The PETG mouthpiece thus enhances tooth safety for TORS. [ABSTRACT FROM AUTHOR]

The article discusses research on how the cardiorespiratory responses of athletes to exercise and physical agility are influenced by over-the-counter vented mouthguard use. Topics explored include the protective benefits of mouthguard use in sports, the experimental physical agility sessions completed by study participants such as the 40-meter dash, vertical jump test, and shuttle run, and the monitoring and evaluation of heart rate and blood lactate of research subjects.

This paper describes the design and fabrication of the mouthpiece used for high-dose-rate (HDR) brachytherapy of a cancerous lesion in the soft palate of a pediatric patient. A custom mouth guard made with Thermo-forming material (Clear -- Mouthguard) similar to those used by athletes, with a bite section, alveolar sulcus, hard and soft palate sections was made. Markers were placed around the lesion using a color transfer applicator and the impression transferred to the mouthpiece. Ten catheters arranged in a plane were placed on the inferior side (concave part) of the mouthpiece, and held in place by stitching each to the mouthpiece. Two pieces of lead (Pb) sheets with total thickness of 5.7 mm were placed beneath the catheters. Wax was used to create additional distance between the tongue and the catheters, and the entire assembly was covered with wax. [ABSTRACT FROM AUTHOR]

Background No mouthpiece has been designed to control salivary flow during endoscopic procedures. A new continuous suction mouthpiece ( CSM) was developed, and its usefulness for percutaneous endoscopic gastrostomy ( PEG) was evaluated. Patients and Methods Seventy-two patients who were scheduled to undergo PEG or the exchange of a gastrostomy button or tube were assigned to one of two groups: the group using the CSM and the group using the conventional mouthpiece. Aspiration pneumonia, procedure duration, extent of salivary flow, frequency of saliva suction, and number of choking episodes during the procedures were evaluated and compared between the two groups. Results The same number of patients was randomly allocated to each group. There were no significant differences between the two groups in sex, age, procedure type, duration of procedure,depth of sedation, and indication for the procedure. The grade of salivary flow was significantly lower in patients with the CSM than in patients with the conventional mouthpiece ( P < 0.001). Significantly fewer suctions and choking episodes were observed in patients with the CSM than in patients with the conventional mouthpiece ( P = 0.013, and P = 0.015, respectively). Aspiration pneumonia and other significant adverse events were not observed in either group. Conclusions CSM reduced the number of episodes associated with salivary flow in PEG-related procedures. The device is expected to reduce complications such as aspiration not only in PEG but in other upper endoscopic procedures. [ABSTRACT FROM AUTHOR]

Dr. U. B. Narayan Rao L.C.P.S (Bom) (born 23rd November 1895, died 14th June 1960) had a busy general practice in Bombay. He adopted dermatology and venereology as his specialty in the 1930's and started the Indian Journal of Venereal Diseases in 1935, the first of its kind in the subcontinent. This journal went on to become the official mouthpiece of the Indian Association of Dermatologists and Venereologists in 1955 and was then known as the Indian Journal of Dermatology and Venereology. Dr. Narayan Rao also played an important role as a founder member of the Bombay Association of Dermato-Venereologists as well as the Indian Association of Dermatologists and Venereologists. Activist, indefatigable worker dedicated to the cause, nationalist, and patriot, generous, dynamic and aggressive, with a flare for arguing; negotiating and convincing, and winning friends in the process, were some of the attributes that may be mentioned of this remarkable person who contributed so much to our specialty. [ABSTRACT FROM AUTHOR]

Background: Noninvasive positive pressure ventilation (NPPV) delivered via a mouthpiece (mNPPV) has been successfully used in stable chronic restrictive respiratory insufficiency, but not in patients with chronic obstructive pulmonary disease (COPD) and acute respiratory failure (ARF). Objectives: The purpose of this matched case-control study was to compare the usefulness of mNPPV to noninvasive ventilation using a nasal or oronasal mask (nNPPV) or standard medical treatment (SMT) in COPD patients with ARF. Methods: Twenty-nine patients receiving mNPPV were matched with 29 patients receiving nNPPV and 29 patients receiving SMT regarding age, SAPSII, admission PaCO2 and pH. Results: In the mNPPV group, admission PaCO2 and pH were 78.6 ± 12 mm Hg and 7.30 ± 0.04, respectively. mNPPV and nNPPV avoided the need for endotracheal intubation in 27 and 25 patients, respectively (nonsignificant) whereas SMT resulted in a higher mechanical ventilation rate (13 patients). At the end of the treatment protocol, PaCO2 was lower in the mNPPV group (62.2 ± 9.6 mm Hg) than in the SMT group (72.4 ± 20.4 mm Hg, p < 0.018) leading to a significantly higher pH. No significant differences were observed between the mNPPV and nNPPV groups. Conclusions: In case of moderate respiratory acidosis, noninvasive ventilation using a mouthpiece significantly reduces the endotracheal intubation rate in comparison with SMT and therefore appears to be a second-line alternative to noninvasive ventilation delivered via a mask, especially when poorly tolerated. Copyright © 2007 S. Karger AG, Basel [ABSTRACT FROM AUTHOR]

There are variations in the values reported for aerosol drug delivery across in vitro experiments throughout the published literature, and often with the same devices or similar experimental setups. Factors contributing to this variability include, but are not limited to device type, equipment settings, drug type and quantification methods. This study assessed the impact of head model choice on aerosol drug delivery using six different adults and three different paediatric head models in combination with a facemask, mouthpiece, and high-flow nasal cannula. Under controlled test conditions, the quantity of drug collected varied depending on the choice of head model. Head models vary depending on a combination of structural design differences, facial features (size and structure), internal volume measurements and airway geometries and these variations result in the differences in aerosol delivery. Of the widely available head models used in this study, only three were seen to closely predict in vivo aerosol delivery performance in adults compared with published scintigraphy data. Further, this testing identified the limited utility of some head models under certain test conditions, for example, the range reported across head models was aerosol drug delivery of 2.62 ± 2.86% to 37.79 ± 1.55% when used with a facemask. For the first time, this study highlights the impact of head model choice on reported aerosol drug delivery within a laboratory setting and contributes to explaining the differences in values reported within the literature. [ABSTRACT FROM AUTHOR]

This randomized trial aimed to compare the safety and efficacy of the GAGLESS mouthpiece for esophagogastroduodenoscopy (EGD) with that of the conventional mouthpiece. In all, 90 participants were divided into the GAGLESS mouthpiece and conventional mouthpiece groups. The primary endpoint was the severity of pain using the visual analog scale (VAS), and secondary endpoints were examination time, past history of endoscopy, success of the procedure, systolic (SBP) and diastolic (DBP) blood pressure, oxygen saturation, pulse rate before and after EGD, and adverse events. Endoscopy was completed in all cases, and no complications were observed. VAS, when passing the scope through the pharynx, was 2.5 ± 2.4 and 2.0 ± 1.9 cm (p = 0.24) in the conventional and GAGLESS groups, respectively, and that, throughout the examination, was 2.5 ± 2.4 and 1.7 ± 1.5 cm (p = 0.06), respectively. The difference in blood pressure between the GAGLESS and conventional groups was not significant for SBP (p = 0.08) and significant for DBP (p = 0.03). The post-EGD difference in DBP was significantly lower in the GAGLESS group than in the conventional group. The results indicate that GAGLESS mouthpieces had a lower VAS during endoscopy than the conventional mouthpieces, and the changes in blood pressure were smaller with the GAGLESS mouthpiece. [ABSTRACT FROM AUTHOR]

We compared the bronchodilator response to salbutamol (albuterol) delivered by a compressed air nebulizer through a mouthpiece and via a facemask in 18 asthmatic children, to determine the most appropriate delivery method. Patients using a mouthpiece had significantly better mean percent increases in forced expiratory volume in 1 sec (FEV[sub 1]) and in forced vital capacity (FVC) than those using a facemask 30 min after inhalation (FEV[sub 1]: 56.4 ± 32.6% vs. 28.9 ± 19.1%, FVC: 34.4 ± 26.4% vs. 7.5 ± 14.9%, respectively). Nebulized therapy plays an important role in the management of bronchial asthma in children and should be delivered by a mouthpiece whenever possible in cases of exacerbated asthma. [ABSTRACT FROM AUTHOR]

Background: Current clinical practice during high-flow nasal therapy (HFNT) involves utilization of a nasal cannula to provide humidification, with a facemask placed over the cannula to deliver aerosol. Few studies have compared aerosol delivery across various delivery interfaces during HFNT. The objective of this study was to address this gap in the literature and evaluate aerosol delivery using two nebulizer types across different drug delivery interfaces, nasal cannula, facemask, and mouthpiece, during simulated adult HFNT. Methods: A facemask or mouthpiece and/or a nasal cannula were positioned on an anatomically correct adult head model. The head model was connected to a breathing simulator via a collection filter. Both healthy breathing pattern and distressed breathing patterns were utilized. Aerosol dose was determined by quantifying the mass of drug captured on a filter positioned distal to the trachea. Results: During simulated healthy breathing, a significantly greater aerosol dose was observed when the vibrating mesh nebulizer (VMN) was integrated with HFNT alone, supplying aerosol and humidified air simultaneously (2.88 ± 0.15%), as opposed to using with a facemask (0.33 ± 0.07%, 1.62 ± 0.46%, and 1.07 ± 0.25% at 0 L/min (LPM), 2LPM, and 6LPM, respectively) or mouthpiece (0.56 ± 0.13%, 2.16 ± 0.06%, and 1.82 ± 0.41% at 0LPM, 2LPM, and 6LPM). In addition, aerosol delivery was also significantly greater when the VMN was integrated into simulated HFNT (2.88 ± 0.15%), in comparison with using the jet nebulizer (JN) with a facemask (0.82 ± 0.16%) or a mouthpiece (0.86 ± 0.11%). During simulated distressed breathing, a significantly greater aerosol dose was observed when the VMN was integrated with HFNT, supplying aerosol and humidified air simultaneously (6.81 ± 0.45%), compared with using a facemask (0.86 ± 0.04%, 2.96 ± 0.26%, and 4.23 ± 0.93% at 0LPM, 2LPM, and 6LPM) or mouthpiece (0.73 ± 0.37%, 0.97 ± 0.20%, and 3.11 ± 0.53% at 0LPM, 2LPM, and 6LPM, respectively). Aerosol delivery was also greater when the VMN was integrated into HFNT (6.81 ± 0.45%), in comparison with using the JN with a facemask (5.72 ± 0.71%) or a mouthpiece (0.69 ± 0.53%). Furthermore, across all drug delivery interfaces, and in line with previous reports, aerosol delivery was greater during simulated distressed breathing, in comparison with simulated healthy adult breathing. Conclusions: This article will be of considerable benefit in enhancing the understanding of aerosol delivery during HFNT, an increasingly adopted therapeutic intervention by healthcare professionals. [ABSTRACT FROM AUTHOR]