Search

A Magneto-Optical Filter-based system has been proposed as an optional payload for ASI’s low-budget Solar Mission ADAHELI, which has completed its Phase A feasibility study. The instrument is capable of providing simultaneous Dopplergrams, intensity and magnetic solar full-disk maps using the potassium 770 nm and sodium 589 nm solar Fraunhofer lines. The instrument is a version, re-designed for a space environment, of the one which has run an observing campaign at the South Pole in 2008 with unprecedented performance. The MOF-based system we present here is a low-cost, low-weight instrument, thus particularly fit to space applications, capable of providing stability and sensitivity of signals on long-term observations. The instrument will explore regions of the oscillation spectrum not available to other missions’ instruments. [ABSTRACT FROM AUTHOR]

Introduction: The aim of this study is to investigate the nanocrystallization of steels caused by the transformation from the austenitic to the martensitic phase induced by a severe plastic deformation (SPD) treatment. In this framework, we applied an air blast shot peening treatment, which is a simple protocol widely used for industrial purposes. Methods: AISI 286 and AISI 316 specimens were peened for different times and polished using diamond pastes in order to remove corrugations higher than 1 μm. The characterization of the steel surfaces was performed by atomic force microscopy (AFM) operating in contact mode. Additional EDXD measurements were performed to confirm the phase transition. Results and Discussion: An AFM-based characterization at nanometric level of the steel surfaces is provided. When the peening exceeds a threshold time that, as expected, depends on the steel composition, a uniform nanostructuration is detected. It is well known that such rearrangement is associated to the growth of a martensitic phase. To date, AFM has been employed in this field only for few applications and to solve specific problems. On the other hand, our results demonstrate that this is a useful technique for the characterization of hardened surfaces, especially when non-destructive sample preparation treatments are required. Moreover, we show that AFM can be a useful tool also for in situ industrial diagnostics of metallic parts. [ABSTRACT FROM AUTHOR]