Search

Currently, microalgae-derived lutein is gaining attention for its potential applications in cosmeceutical, nutraceutical, pharmaceutical, and food industries. Lutein is of commercial interest for a broad variety of health benefits: antioxidant activity, skin health improvement, reducing age-related macular degeneration, and the treatment of cancer. Microalgae are the fastest-growing lutein source, have the highest content in nature, and are a promising sustainable alternative to the current commercial source, marigold flowers. Microalgal cultivation has added environmental benefits over plants with higher carbon sequestration, reduced water footprint, and no pesticide use. To date, no industrial facility exists for the production of lutein from microalgae. This review outlines the existing technologies for bioprocessing of lutein at pilot scale (cultivation, harvesting, extraction, and purification). In addition, lutein encapsulation, a seldom discussed area, is explored in depth. In view of this knowledge, lutein could be anticipated as the next successful sustainable product from microalgae obtained at industrial scale for the circular economy. [ABSTRACT FROM AUTHOR]

This review paper delves into the intricate challenge of transforming microalgal biomass into biofuel through anaerobic digestion, elucidating its significance for sustainable energy production and waste management. Despite the promise anaerobic digestion holds, obstacles like inhibitory substances, process stability issues, and residue management complexities persist. Microalgal biomass, characterized by high biogas yields and carbon sequestration potential, emerges as a viable solution to enhance anaerobic digestion efficiency. Employing a comprehensive literature selection process, the review synthesizes recent studies to shed light on breakthroughs and pinpoint areas for future investigation. Key findings underscore advancements in microalgal biomass utilization, with strategic strain selection and innovative pretreatment methods resulting up to 25% increase in biogas production. Additionally, the assimilation of co-digestion techniques yields enhanced overall process efficiency. Microalgal biomass demonstrates remarkable carbon sequestration capabilities, sequestering up to 60% of CO2 during the anaerobic digestion process. Furthermore, the analysis reveals that despite inhibitory substances posing challenges, innovative approaches have reduced inhibition by 15%, promoting more stable and efficient digestion. Implications of the review findings stress the need to scale laboratory successes to industrial applications while maintaining environmental sustainability. Identified gaps include challenges in inhibitory substance management and process stability, with future research directions advocating for multidisciplinary approaches to unlock the full potential of microalgal biomass in anaerobic digestion. In conclusion, the review contributes significantly to understanding the intricate relationship between microalgal biomass and anaerobic digestion, highlighting the importance of continued research and development to address existing challenges and advance towards a more regenerative bioeconomy. [ABSTRACT FROM AUTHOR]

Deep learning (DL) is revolutionizing evidence-based decision-making techniques that can be applied across various sectors. Specifically, it possesses the ability to utilize two or more levels of non-linear feature transformation of the given data via representation learning in order to overcome limitations posed by large datasets. As a multidisciplinary field that is still in its nascent phase, articles that survey DL architectures encompassing the full scope of the field are rather limited. Thus, this paper comprehensively reviews the state-of-art DL modelling techniques and provides insights into their advantages and challenges. It was found that many of the models exhibit a highly domain-specific efficiency and could be trained by two or more methods. However, training DL models can be very time-consuming, expensive, and requires huge samples for better accuracy. Since DL is also susceptible to deception and misclassification and tends to get stuck on local minima, improved optimization of parameters is required to create more robust models. Regardless, DL has already been leading to groundbreaking results in the healthcare, education, security, commercial, industrial, as well as government sectors. Some models, like the convolutional neural network (CNN), generative adversarial networks (GAN), recurrent neural network (RNN), recursive neural networks, and autoencoders, are frequently used, while the potential of other models remains widely unexplored. Pertinently, hybrid conventional DL architectures have the capacity to overcome the challenges experienced by conventional models. Considering that capsule architectures may dominate future DL models, this work aimed to compile information for stakeholders involved in the development and use of DL models in the contemporary world. [ABSTRACT FROM AUTHOR]

The goal of this review is to offer an all-encompassing evaluation of an integrated solar energy system within the framework of solar energy utilization. This holistic assessment encompasses photovoltaic technologies, solar thermal systems, and energy storage solutions, providing a comprehensive understanding of their interplay and significance. It emphasizes the importance of solar energy as a renewable resource and its role in addressing global energy demand and mitigating climate change. The review highlights the significance of advancements in various solar energy technologies, focusing on their environmental benefits, including greenhouse gas emissions reduction and air and water pollution mitigation. It explores the evolution of photovoltaic technologies, categorizing them into first-, second-, and third-generation photovoltaic cells, and discusses the applications of solar thermal systems such as water heaters, air heaters, and concentrators. The paper examines key advancements in energy storage solutions for solar energy, including battery-based systems, pumped hydro storage, thermal storage, and emerging technologies. It references recent published literature to present findings on energy payback time, carbon footprint, and performance metrics. Challenges to widespread adoption are discussed, including cost and economic viability, intermittency, environmental impacts, and grid integration. Strategies to overcome these challenges, such as cost reduction, policy support, energy storage integration, and sustainable practices, are presented based on published literature. By bridging gaps in existing literature, this comprehensive resource aims to equip researchers, policymakers, and industry professionals with insights into forging a sustainable and renewable energy future. [ABSTRACT FROM AUTHOR]

This study reviews recent developments, challenges, and the prospect of electronic waste (e-waste). Various aspects of e-waste, including collection, pre-treatment, and recycling, are discussed briefly. It is found that Europe is the leading collector of e-waste, followed by Asia, America, Oceania, and Africa. The monetary worth of e-waste raw materials is estimated to be $57.0 billion. However, only $10.0 billion worth of e-waste is recycled and recovered sustainably, offsetting 15.0 million tonnes (Mt) of CO2. The major challenges of e-waste treatment include collection, sorting and inhomogeneity of waste, low energy density, prevention of further waste, emission, and cost-effective recycling. Only 78 countries in the world now have e-waste related legislation. Such legislation is not effectively implemented in most regions. Developing countries like south-eastern Asia and Northern Africa have limited or no e-waste legislation. Therefore, country-specific standards and legislation, public awareness, effective implementation, and government incentives for developing cost-effective technologies are sought to manage e-waste, which will play an important role in the circular economy. [ABSTRACT FROM AUTHOR]

There is actually an intense research in ethanol dry reforming because bioethanol and carbon dioxide, a greenhouse gas, can be converted into syngas and, in turn, into chemicals and energy such as dihydrogen (H2). Here we review dry reforming of ethanol with focus on thermodynamics, catalysts and effect of operating conditions. Noble metal-based catalysts typically exhibit both ethanol and CO2 conversions above 85% in the range of 923‒1073 K, yet the high cost of precious metals has restrained their potential applications. H2 yield of 90% and above is achieved at 1073 K or above due to the endothermic nature of ethanol dry reforming. Improving catalytic performance and inhibiting coke formation may be achieved by using bimetallic catalysts and other types of metal oxides. [ABSTRACT FROM AUTHOR]

Microalgae are photosynthetic cell factories of global interest for fuels, food, feed, bioproducts, carbon sequestration, waste mitigation, and environmental remediation. Actually, microalgal monocultures are used for biomass production and pollutant removal, yet are limited by moderate production and contaminations. Here we review binary cultures of autotrophic microalgae with bacteria, yeast, fungi, and heterotrophic microalgae, with focus on growth, lipid accumulation, bioremediation, wastewater treatment, and cost-effective harvesting. We found that a controlled, symbiotic binary culture facilitates waste bioremediation and biomass harvesting, with 96% efficiency, and reduces cost by 20–30%. Noteworthy, in binary or polyculture systems, autotrophic microalgae often develop a symbiosis by exchanging nutrients and metabolites with heterotrophic microalgae, bacteria, yeast, fungi, which may help to achieve higher biomass production. [ABSTRACT FROM AUTHOR]

Globally, 150–170 billion cubic metres of gas are being flared annually from petroleum refineries, petrochemical industries and from landfills. In this paper, we critically review the flaring technology, the impact of flare gas on the environment, and recovery options. We also discuss flare gas challenges such as technical, structural, economic, and regulatory challenges. We found that ground flaring is preferred whenever the facility is situated in a highly populated area or close to an aviation zone. Gas flaring produces major pollutants including benzene, benzopyrene and toluene. The recovery of this gas should be intensified to minimise impacts. [ABSTRACT FROM AUTHOR]

The severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is continuously evolving and four variants of concern have been identified so far, including Alpha, Beta, Gamma and Delta variants. Here we review the indirect effect of preventive measures such as the implementation of lockdowns, mandatory face masks, and vaccination programs, to control the spread of the different variants of this infectious virus on the environment. We found that all these measures have a considerable environmental impact, notably on waste generation and air pollution. Waste generation is increased due to the implementation of all these preventive measures. While lockdowns decrease air pollution, unsustainable management of face mask waste and temperature-controlled supply chains of vaccination potentially increases air pollution. [ABSTRACT FROM AUTHOR]

Biogas production is rising in the context of fossil fuel decline and the future circular economy, yet raw biogas requires purification steps before use. Here, we review biogas upgrading using physical, chemical and biological methods such as water scrubbing, physical absorption, pressure swing adsorption, cryogenic separation, membrane separation, chemical scrubbing, chemoautotrophic methods, photosynthetic upgrading and desorption. We also discuss their techno-economic feasibility. We found that physical and chemical upgrading technologies are near-optimal, but still require high energy and resources. Biological methods are less explored despite their promising potential. High-pressure water scrubbing is more economic for small-sized plants, whereas potassium carbonate scrubbing provides the maximum net value for large-sized plants. [ABSTRACT FROM AUTHOR]

Increasing population and urbanization call for smarter cities where the cycles of matter and energy are optimized, notably in buildings which are actually a source of pollution consuming a lot of energy. The efficiency of building energy has been improved by modelling earth-air heat exchangers, yet selecting the suitable models is challenging. Here we review data-driven earth-air heat exchanger models used for buildings. We discuss issues brought about by assumptions, unmeasured disruptions, and uncertainties in numerical and experimental works. We found that high accuracy can be reached if sufficient data is available. Models are appropriate for real-time activity due to their structure simplicity, yet they display a poor generalization capacity. Model development is limited by the constrained parameters and the complex boundary conditions of the heat exchangers. [ABSTRACT FROM AUTHOR]

Nanoparticles are the magic bullets and at the leading edge in the field of nanotechnology, and their unique properties make these materials indispensable and superior in many areas, including the electronic field. Extensive applications of nanomaterials are incontrovertibly entering our living system. The increasing use of nanomaterials into the ecosystem is one of the crucial environmental factors that human being is facing. Nanomaterials raise noticeable toxicological concerns; particularly their accumulation in plants and the resultant toxicity may affect the food chain. Here, we analyzed the characterization of nanomaterials, such as graphene, Al2O3, TiO2, and semi‐insulating or conducting nanoparticles. Quantitative evaluation of the nanomaterials was conducted and their commercialization aspects were discussed. Various characterization techniques, scanning electron microscopy, X‐ray diffraction, and ultraviolet rays were utilized to identify the morphology, phase, absorbance, and crystallinity. In addition, we analyzed the effects of nanomaterials on plants. The toxicity of nanoparticles has severe effects on loss of morphology of the plants. Potential mechanisms including physical and physiological effects were analyzed. In future studies, it is indispensable to assess widely accepted toxicity evaluation for safe production and use of nanomaterials. [ABSTRACT FROM AUTHOR]

This study presents a 3‐dimensional (3D) network structure of cellulose scaffold (CS), which was in situ decorated with silver nanoparticles (AgNPs). The scaffold was then infiltrated with epoxy matrix and cured at elevated temperature to sinter the AgNPs; finally, highly thermoconductive epoxy composites (Ag@CS/epoxy) was obtained. The resultant Ag@CS20/epoxy composite reached a thermal conductivity of 2.52 W·m−1·K−1 at 2.2 vol% of filler loading, which shows an enhancement of over 11‐folds in the thermal conductivity compared to the neat epoxy. The superb electrical conductivity value of over 53,691 S·m−1 of the Ag@CS20/epoxy was achieved, which led to exceptional EMI SE values of 69.1 dB. Furthermore, surface temperatures during heating and cooling were also investigated to demonstrate the superior heat dissipating capacity of the Ag@CS/epoxy composite, which can be potentially put an application as thermal dissipating material in the next generation of electronics. [ABSTRACT FROM AUTHOR]

Biodiesel is an alternative to fossil fuels for diesel engines, yet actual biofuel properties need to be tuned to comply with fuel standards. In particular, fuel stability is required for efficiency and commercial use. Fuel stability varies with the nature and proportion of chemical functional groups of biodiesel. Optimum oxidation stability is required because degradation by oxidation gives products that compromise fuel properties and impair fuel quality and engine performance. For instance, oxidation induces the formation of short-chain corrosive acids and deposits. Here, we review techniques to improve the oxidation stability of biodiesel. For instance, stability is improved by additives such as antioxidants. Factors influencing oxidation stability include composition of fatty acids, acid content, peroxide content, iodine content, viscosity, insoluble impurities, external conditions, and storage material. Antioxidants reduce lipid peroxidation at the beginning of the chain reaction and increase the onset temperatures. [ABSTRACT FROM AUTHOR]

Microalgae has received overwhelming attention worldwide as a sustainable source for energy generation. However, the production of biofuel from microalgae biomass consists of several steps, of which lipid extraction is the most important one. Because of the nature of feedstock, extraction needs special attention. Three different methods were studied to extract algal oil from two different algae variant, Chlorella sp. and Spirulina sp. The highest percentage oil yield was obtained by ultrasonication (9.4% for Chlorella sp., 6.6% for Spirulina sp.) followed by the Soxhlet and solvent extraction processes. Ultrasonication and Soxhlet extraction processes were further optimized to maximize oil extraction as solvent extraction was not effective in extracting lipid. For ultrasonication, an amplitude of 90% recorded the highest percentage yield of oil for Spirulina sp. and a 70% amplitude recorded the highest percentage yield of oil for Chlorella sp. On the other hand, for Soxhlet extraction, a combination of chloroform, hexane, and methanol at a 1:1:1 ratio resulted in the highest yield of algal oil. Afterward, the crude algae oil from the ultrasonication process was transesterified for 5 h using an immobilized lipase (Novozyme 435) at 40 °C to convert triglycerides into fatty acid methyl ester and glycerol. Thus, ultrasonic-assisted lipid extraction was successful in producing biodiesel from both the species. [ABSTRACT FROM AUTHOR]

The demands for eco-friendly bio-lubricants are growing due to the environmental concern and the rapid depletion of petroleum oil. This paper outlines the tribological evaluation of jatropha methyl ester (JME) based bio-lubricant by analyzing its anti-wear (AW) and extreme pressure (EP) characteristics. The AW and EP tests were conducted using a four-ball tribotester with standard test methods of ASTM D 4172 and ASTM D 2783, respectively. After each test, the wear scar diameter, flash temperature parameter, viscosity and viscosity index (VI) were measured. The SEM analysis characterized the surface structure of the worn surface. The properties of formulated bio-lubricants were compared with the commercial lubricant SAE 15W-40. Experimental results showed that under boundary lubrication, the bio-lubricants showed excellent tribological properties up to the initial seizure load (ISL). Over the ISL, the friction and wear were increased slightly as compared to the commercial lubricant. The final seizure load (FSL) found for the biolubricant (BL 10), and commercial lubricant was 220 kg. The biolubricant with 10 % JME (BL 10) was found to be the most favorable, which met standard ISO requirements except for pour point. [ABSTRACT FROM AUTHOR]

Transport fuel is one of the major concerns of the energy market. This fuel mainly comes from the processing of crude petroleum oil. The transport fuel processing industries, such as crude oil distillation plants, gas condensate fractionation plants, natural gas processing plants, etc., are one of the most energy- and emission-intensive sectors in the world. On the other hand, the handling and transportation of petroleum products like gasoline, kerosene, diesel, naphtha, octane and sprite, etc. also produce environmental pollution. This study reviewed energy and waste management by transport fuel processing industries in Bangladesh. Such industries are also known as petrochemical industries. They mainly produce gaseous pollutants such as process gas, waste gas, etc. and liquid pollutants such as produced water, waste oil and grease, etc. The gaseous pollutants are burnt in the flare system to save the environment. The liquid pollutants are more hazardous because of their higher salinity and corrosivity and higher amounts of grease. The literature on waste water management techniques, pollution abatement techniques and oil-water separator techniques is described. The waste water treatment techniques used in the case study industries are briefly discussed. Energy flows for both gaseous and liquid waste management are developed. Energy-saving and time frame measures which can be implemented are also outlined. The study found that the rational use of energy and proper environmental management are essential for achieving the energy and environmental sustainability of transport fuel process industries. [ABSTRACT FROM AUTHOR]

The corrosiveness of biodiesel affects the fuel processing infrastructure and different parts of an internal combustion (IC) engine. The present study investigates the corrosion behaviour of automotive materials such as stainless steel, aluminium, cast iron, and copper in 20% (B20) and 30% (B30) by volume second-generation Jatropha biodiesel using an immersion test. The results were compared with petro-diesel (B0). Various fuel properties such as the viscosity, density, water content, total acid number (TAN), and oxidation stability were investigated after the immersion test using ASTM D341, ASTM D975, ASTM D445, and ASTM D6751 standards. The morphology of the corroded materials was investigated using optical microscopy and scanning electron microscopy SEM), whereas the elemental analysis was carried out using energy-dispersive X-ray spectroscopy (EDS). The highest corrosion using biodiesel was detected in copper, while the lowest was detected in stainless steel. Using B20, the rate of corrosion in copper and stainless steel was 17% and 14% higher than when using diesel, which further increased to 206% and 86% using B30. After the immersion test, the viscosity, water content, and TAN of biodiesel were increased markedly compared to petro-diesel. [ABSTRACT FROM AUTHOR]

Biodiesel is a clean, renewable, liquid fuel that can be used in existing diesel engines without modification as pure or blend. Transesterification (the primary process for biodiesel generation) via heterogeneous catalysis using low-cost waste feedstocks for catalyst synthesis improves the economics of biodiesel production. Heterogeneous catalysts are preferred for the industrial generation of biodiesel due to their robustness and low costs due to the easy separation and relatively higher reusability. Calcium oxides found in abundance in nature, e.g., in seashells and eggshells, are promising candidates for the synthesis of heterogeneous catalysts. However, process improvements are required to design productive calcium oxide-based catalysts at an industrial scale. The current work presents an overview of the biodiesel production advancements using calcium oxide-based catalysts (e.g., pure, supported, and mixed with metal oxides). The review discusses different factors involved in the synthesis of calcium oxide-based catalysts, and the effect of reaction parameters on the biodiesel yield of calcium oxide-based catalysis are studied. Further, the common reactor designs used for the heterogeneous catalysis using calcium oxide-based catalysts are explained. Moreover, the catalytic activity mechanism, challenges and prospects of the application of calcium oxide-based catalysts in biodiesel generation are discussed. The study of calcium oxide-based catalyst should continue to be evaluated for the potential of their application in the commercial sector as they remain the pivotal goal of these studies. [ABSTRACT FROM AUTHOR]

Global energy sources are being transformed from hydrocarbon-based energy sources to renewable and carbon-free energy sources such as wind, solar and hydrogen. The biggest challenge with hydrogen as a renewable energy carrier is the storage and delivery system's complexity. Therefore, other media such as ammonia for indirect storage are now being considered. Research has shown that at reasonable pressures, ammonia is easily contained as a liquid. In this form, energy density is approximately half of that of gasoline and ten times more than batteries. Ammonia can provide effective storage of renewable energy through its existing storage and distribution network. In this article, we aimed to analyse the previous studies and the current research on the preparation of ammonia as a next-generation renewable energy carrier. The study focuses on technical advances emerging in ammonia synthesis technologies, such as photocatalysis, electrocatalysis and plasmacatalysis. Ammonia is now also strongly regarded as fuel in the transport, industrial and power sectors and is relatively more versatile in reducing CO2 emissions. Therefore, the utilisation of ammonia as a renewable energy carrier plays a significant role in reducing GHG emissions. Finally, the simplicity of ammonia processing, transport and use makes it an appealing choice for the link between the development of renewable energy and demand. [ABSTRACT FROM AUTHOR]

The present study investigated the relationship between the transmission of COVID-19 infections and climate indicators in Dhaka, Bangladesh, using coronavirus infections data available from the Institute of Epidemiology, Disease Control and Research (IEDCR), Bangladesh. The Spearman rank correlation test was carried out to study the association of seven climate indicators, including humidity, air quality, minimum temperature, precipitation, maximum temperature, mean temperature, and wind speed with the COVID-19 outbreak in Dhaka, Bangladesh. The study found that, among the seven indicators, only two indicators (minimum temperature and average temperature) had a significant relationship with new COVID-19 cases. The study also found that air quality index (AQI) had a strong negative correlation with cumulative cases of COVID-19 in Dhaka city. The results of this paper will give health regulators and policymakers valuable information to lessen the COVID-19 spread in Dhaka and other countries around the world. [ABSTRACT FROM AUTHOR]

Biodiesel is a proven alternative fuel that can serve as a substitute for petroleum diesel due to its renewability, non-toxicity, sulphur-free nature and superior lubricity. Waste-based non-edible oils are studied as potential biodiesel feedstocks owing to the focus on the valorisation of waste products. Instead of being treated as municipal waste, waste coffee grounds (WCG) can be utilised for oil extraction, thereby recovering an energy source in the form of biodiesel. This study evaluates oil extraction from WCG using ultrasonic and Soxhlet techniques, followed by biodiesel conversion using an ultrasonic-assisted transesterification process. It was found that n-hexane was the most effective solvent for the oil extraction process and ultrasonic-assisted technology offers a 13.5% higher yield compared to the conventional Soxhlet extraction process. Solid-to-solvent ratio and extraction time of the oil extraction process from the dried waste coffee grounds (DWCG) after the brewing process was optimised using the response surface methodology (RSM). The results showed that predicted yield of 17.75 wt. % of coffee oil can be obtained using 1:30 w/v of the mass ratio of DWCG-ton-hexane and 34 min of extraction time when 32% amplitude was used. The model was verified by the experiment where 17.23 wt. % yield of coffee oil was achieved when the extraction process was carried out under optimal conditions. The infrared absorption spectrum analysis of WCG oil determined suitable functional groups for biodiesel conversion which was further treated using an ultrasonic-assisted transesterification process to successfully convert to biodiesel. [ABSTRACT FROM AUTHOR]

The production of biodiesel using vegetable oil is an effective way to meet growing energy demands, which could potentially reduce the dependency on fossil fuels. The aim of this study was to evaluate grape seed (Vitis vinifera), Philippine tung (Reutealis trisperma), and kesambi (Schleichera oleosa) oils as potential feedstocks for biodiesel production to meet this demand. Firstly, biodiesels from these oils were produced and then their fatty acid methyl ester profiles and physicochemical properties were evaluated and compared with palm biodiesel. The results showed that the biodiesel produced from grape seed oil possessed the highest oxidation stability of 4.62 h. On the other hand, poor oxidation stability was observed for Philippine tung biodiesel at 2.47 h. The poor properties of Philippine tung biodiesel can be attributed to the presence of α-elaeostearic fatty acid. Furthermore, synthetic antioxidants (pyrogallol) and diesel were used to improve the oxidation stability. The 0.2 wt.% concentration of pyrogallol antioxidant could increase the oxidation stability of grape seed biodiesel to 6.24 h, while for kesambi and Philippine tung, biodiesels at higher concentrations of 0.3% and 0.4 wt.%, respectively, were needed to meet the minimum limit of 8 h. The blending of biodiesel with fossil diesel at different ratios can also increase the oxidation stability. [ABSTRACT FROM AUTHOR]

Fossil fuel depletion, along with its ever-increasing price and detrimental impact on the environment, has urged researchers to look for alternative renewable energy. Of all the options available, biomass presents a very reliable source due to its never-ending supply. As research on various biomasses has grown in recent years, waste from these biomasses has also increased, and it is now time to shift the focus to utilizing these wastes for energy. The current waste management system mainly focuses on open burning and soil incorporation as it is cost-effective; however, these affect the environment. There must be an alternative way, such as to use it for power generation. Rice straw and rice husk are examples of such potential biomass waste. Rice is the main food source for the world, mostly in Asian regions, as most people consume rice daily. This paper reviews factors that impact the implementation of rice-straw-based power plants. Ash content and moisture content are important properties that govern combustion, and these vary with location. Logistical improvements are required to reduce the transport cost of rice husk and rice straw, which is higher than the transportation cost of coal. [ABSTRACT FROM AUTHOR]

Optimizing the process parameters of biodiesel production is the key to maximizing biodiesel yields. In this study, artificial neural network models integrated with ant colony optimization were developed to optimize the parameters of the two-step Cerbera manghas biodiesel production process: (1) esterification and (2) transesterification. The parameters of esterification and transesterification processes were optimized to minimize the acid value and maximize the C. manghas biodiesel yield, respectively. There was excellent agreement between the average experimental values and those predicted by the artificial neural network models, indicating their reliability. These models will be useful to predict the optimum process parameters, reducing the trial and error of conventional experimentation. The kinetic study was conducted to understand the mechanism of the transesterification process and, lastly, the model could measure the physicochemical properties of the C. manghas biodiesel. [ABSTRACT FROM AUTHOR]

This study aimed to observe the potential of solid bioethanol as an alternative fuel with high caloric value. The solid bioethanol was produced from liquid bioethanol, which was obtained from the synthesis of oil palm empty fruit bunches (PEFBs) through the delignification process by using organosolv pretreatment and enzymatic hydrolysis. Enzymatic hydrolysis was conducted using enzyme (60 FPUg−1 of cellulose) at a variety of temperatures (35 °C, 70 °C, and 90 °C) and reaction times (2, 6, 12, 18, and 24 h) in order to obtain a high sugar yield. The highest sugars were yielded at the temperature of 90 °C for 48 h (152.51 mg/L). Furthermore, fermentation was conducted using Saccharomyces cerevisiae. The bioethanol yield after fermentation was 62.29 mg/L. Bioethanol was extracted by distillation process to obtain solid bioethanol. The solid bioethanol was produced by using stearic acid as the additive. In order to get high-quality solid bioethanol, the calorific value was optimized using the response surface methodology (RSM) model. This model provided the factor variables of bioethanol concentration (vol %), stearic acid (g), and bioethanol (mL) with a minus result error. The highest calorific value was obtained with 7 g stearic acid and 5 mL bioethanol (43.17 MJ/kg). Burning time was tested to observe the quality of the solid bioethanol. The highest calorific value resulted in the longest burning time. The solid bioethanol has a potential as solid fuel due to the significantly higher calorific value compared to the liquid bioethanol. [ABSTRACT FROM AUTHOR]

Strict emission regulations and demand for better fuel economy are driving forces for finding advanced engines that will be able to replace the conventional internal combustion engines in the near future. Homogeneous charge compression ignition (HCCI) engines use a different combustion technique; there are no spark plugs or injectors to assist the combustion. Instead, when the mixtures reach chemical activation energy, combustion auto-ignites in multiple spots. The main objective of this review paper is to study the engine performance and emission characteristics of HCCI engines operating in various conditions. Additionally, the impact of different fuels and additives on HCCI engine performance is also evaluated. The study also introduces a potential guideline to improve engine performance and emission characteristics. Compared to conventional compression ignition and spark ignition combustion methods, the HCCI combustion mode is noticeably faster and also provides better thermal efficiency. Although a wide range of fuels including alternative and renewable fuels can be used in the HCCI mode, there are some limitation/challenges, such as combustion limited operating range, phase control, high level of noise, cold start, preparation of homogeneous charge, etc. In conclusion, the HCCI combustion mode can be achieved in existing spark ignition (SI) engines with minor adjustments, and it results in lower oxides of nitrogen (NOx) and soot emissions, with practically a similar performance as that of SI combustion. Further improvements are required to permit extensive use of the HCCI mode in future. [ABSTRACT FROM AUTHOR]

Processing biodiesel from non-edible sources of feedstock seems to be thriving in recent years. It also has also gathered more attention than in the past, mainly because the biodiesel product is renewable and emits lower pollution compared to fossil fuels. Researchers have started their work on various kinds of biodiesel product, especially from a non-edible feedstock. Non-edible feedstocks such as Ceiba pentandra show great potential in the production of biodiesel, especially in the Southeast Asia region because the plants seem to be abundant in that region. Ceiba pentandra, also known as the Kapok tree, produces hundreds of pods with a length of 15 cm (5.9 in) and diameter 2–5 cm (1–2 in). The pods consist of seeds and fluff in the surrounding areas inside the pod, which itself contains yellowish fibre, a mixture of cellulose and lignin. The seeds of Ceiba pentandra can be used as feedstock for biodiesel production. The study for Ceiba pentandra will involve techno-economic, as well as a sensitivity analysis. Moreover, the study also shows that the techno-economic analysis of a biodiesel processing plant for 50 ktons Ceiba pentandra with a life span of 20 years is around $701 million with 3.7 years of the payback period. Besides that, this study also shows the differences in operating cost and oil conversion yield, which has the least impact on running cost. By improving the conversion processes continuously and by increasing the operational efficiency, the cost of production will decrease. In addition, the study also explains the differences of final price biodiesel and diesel fossil fuel, both showing dissimilar scenarios subsidy and taxation. Biodiesel has a subsidy of $0.10/L and $0.18/L with a total tax exemption of 15%. The value was obtained from the latest subsidy cost and diesel in Malaysia. Finally, further research is needed in order to fully utilize the use of Ceiba pentandra as one of the non-edible sources of biodiesel. [ABSTRACT FROM AUTHOR]

Nowadays, increased interest among the scientific community to explore the Calophyllum inophyllum as alternative fuels for diesel engines is observed. This research is about using mixed Calophyllum inophyllum-palm oil biodiesel production and evaluation that biodiesel in a diesel engine. The Calophyllum inophyllum–palm oil methyl ester (CPME) is processed using the following procedure: (1) the crude Calophyllum inophyllum and palm oils are mixed at the same ratio of 50:50 volume %, (2) degumming, (3) acid-catalysed esterification, (4) purification, and (5) alkaline-catalysed transesterification. The results are indeed encouraging which satisfy the international standards, CPME shows the high heating value (37.9 MJ/kg) but lower kinematic viscosity (4.50 mm2/s) due to change the fatty acid methyl ester (FAME) composition compared to Calophyllum inophyllum methyl ester (CIME). The average results show that the blended fuels have higher Brake Specific Fuel Consumption (BSFC) and NOx emissions, lower Brake Thermal Efficiency (BTE), along with CO and HC emissions than diesel fuel over the entire range of speeds. Among the blends, CPME5 offered better performance compared to other fuels. It can be recommended that the CPME blend has great potential as an alternative fuel because of its excellent characteristics, better performance, and less harmful emission than CIME blends. [ABSTRACT FROM AUTHOR]

Solar energy is a renewable energy source that can be utilized for different applications in today's world. The effective use of solar energy requires a storage medium that can facilitate the storage of excess energy, and then supply this stored energy when it is needed. An effective method of storing thermal energy from solar is through the use of phase change materials (PCMs). PCMs are isothermal in nature, and thus offer higher density energy storage and the ability to operate in a variable range of temperature conditions. This article provides a comprehensive review of the application of PCMs for solar energy use and storage such as for solar power generation, water heating systems, solar cookers, and solar dryers. This paper will benefit the researcher in conducting further research on solar power generation, water heating system, solar cookers, and solar dryers using PCMs for commercial development. [ABSTRACT FROM AUTHOR]