Search

Lead chalcogenides are compelling materials for nanophotonics and optoelectronics due to their high refractive indices, extreme thermo‐optic coefficients, and high transparency in the mid‐infrared (MIR). In this study, PbTe hoppercubes (HC, face‐open box cubes) are synthesized and explored for their MIR resonant characteristics. Single‐particle microspectroscopy uncovered deep‐subwavelength light localization, with a spectral response dominated by both fundamental and multiple high‐order Mie‐resonant modes. Nanoimaging mapping using scattering‐type scanning near‐field optical microscopy (s‐SNOM) reveals that the scattering at the center of the HC is reduced by more than five times compared to the edges. 2D‐Hyperspectral scans conducted using a low‐power broadband MIR source and nanometer spatial resolutions provided information on the local amplitude and phase‐resolved near‐fields, including amplitude and phase mapping of higher order modes with measured Q‐factors of close to 100. Employing s‐SNOM to characterize complex resonant nanophotonic structures holds implications for quantum sensing, IR photodetection, non‐linear generation, and ultra‐compact high‐Q metaphotonics. [ABSTRACT FROM AUTHOR]

Nanophotonic structures have shown promising routes to controlling and enhancing nonlinear optical processes at the nanoscale. However, most nonlinear nanostructures require a handling substrate, reducing their application scope. Due to the underwhelming heat dissipation, it has been a challenge to evaluate the nonlinear optical properties of free-standing nanostructures. Here, we overcome this challenge by performing shot-controlled fifth harmonic generation (FHG) measurements on a SiC meta-membrane – a free-standing transmission metasurface with pronounced optical resonances in the mid-infrared (λres ≈ 4,000 nm). Back focal plane imaging of the FHG diffraction orders and rigorous finite-difference time-domain simulations reveal at least two orders of magnitude enhancement of the FHG from the meta-membrane, compared to the unstructured SiC film of the same thickness. Single-shot measurements of the meta-membrane with varying resonance positions reveal an unusual spectral behavior that we explain with Kerr-driven intensity-dependent resonance dynamics. This work paves the way for novel substrate-less nanophotonic architectures. [ABSTRACT FROM AUTHOR]

A low‐cost single frequency laser, emitting in the mid‐infrared spectral region and dissipating minimal electrical power, is a key ingredient for the next generation of portable gas sensors for high‐volume applications involving chemical sensing of important greenhouse and pollutant gases. Herein, a Quantum Cascade Surface Emitting Laser (QCSEL) is proposed, which is implemented as a short linear cavity with high reflectivity coated end‐mirrors to suppress any edge emission and employs a buried semiconductor diffraction grating to extract the light from the surface. By wafer‐level testing, the cavity length scaling is investigated, mirror reflectivities larger than 0.9 are extracted, and a pulsed threshold power dissipation of 237 mW for an emission wavelength near 7.5 µm is achieved. Finally, single‐mode emission with a side‐mode suppression ratio larger than 33 dB is demonstrated for a 248 µm short cavity, which is mounted with the epitaxial layer up and operated in continuous wave at 20 ∘C$^{\circ}{\rm C}$. [ABSTRACT FROM AUTHOR]

The development of new methods of identification of active pharmaceutical ingredients (API) is a subject of paramount importance for research centers, the pharmaceutical industry, and law enforcement agencies. Here, a system for identifying and classifying pharmaceutical tablets containing acetaminophen (AAP) by brand has been developed. In total, 15 tablets of 11 brands for a total of 165 samples were analyzed. Mid-infrared vibrational spectroscopy with multivariate analysis was employed. Quantum cascade lasers (QCLs) were used as mid-infrared sources. IR spectra in the spectral range 980–1600 cm−1 were recorded. Five different classification methods were used. First, a spectral search through correlation indices. Second, machine learning algorithms such as principal component analysis (PCA), support vector classification (SVC), decision tree classifier (DTC), and artificial neural network (ANN) were employed to classify tablets by brands. SNV and first derivative were used as preprocessing to improve the spectral information. Precision, recall, specificity, F1-score, and accuracy were used as criteria to evaluate the best SVC, DEE, and ANN classification models obtained. The IR spectra of the tablets show characteristic vibrational signals of AAP and other APIs present. Spectral classification by spectral search and PCA showed limitations in differentiating between brands, particularly for tablets containing AAP as the only API. Machine learning models, specifically SVC, achieved high accuracy in classifying AAP tablets according to their brand, even for brands containing only AAP. [ABSTRACT FROM AUTHOR]

Manipulating the propagation of mid-infrared (mid-IR) light is crucial for optical imaging, biosensing, photocatalysis, and guiding photonic circuits. Artificially engineered metamaterials were introduced to comprehensively control optical waves. However, fabrication challenges and optical losses have impeded the progress. Fortunately, two-dimensional van der Waals (vdW) materials are alternatives because of their inherent optical properties, such as hyperbolic behavior, high confinement, low loss, and atomic-scale thickness. In this research, we conducted theoretical and numerical investigations on the α-phase molybdenum trioxide, a biaxial vdW material, with patterned graphene to assess the potential of the tunable focusing of mid-IR light. Our proposed method directly alters the path of excited light to focus mid-IR light by negative refraction. Further, the patterned graphene in our design offers enhanced focusing characteristics, featuring a significantly reduced waist diameter with 1/92 of the free-space wavelength, an enhanced beam quality without pronounced field ripples, and a fivefold increase in field intensity. Moreover, our approach significantly preserves the waist diameter of the focused beam while facilitating directional steering. Thus, the focused beam can propagate in a canalized manner toward the desired direction. These advancements lay the foundation for promising applications in planar photonics. [ABSTRACT FROM AUTHOR]

In this paper, we present a single crystal, KTA (potassium titanyl-arsenate, KTiOAsO4) based picosecond optical parametric amplifier pumped by an in-house built 1030 nm Yb:YAG thin-disk laser, capable of tunability from 1.46 to 3.5 µ m, operating at 90 kHz, with high average power in the signal and idler beams. The highest output power of 8.9 W was reached for the 1750 nm signal beam with 19% conversion efficiency and the respective 2500 nm idler beam power was 6.2 W with 13% efficiency. The highest combined signal and idler mid-infrared power was 17 W at the 2060 nm wavelength degeneracy point. [ABSTRACT FROM AUTHOR]

Ultra-broadband metamaterial absorbers (UBMAs) that are compatible with CMOS technology for use in the mid-infrared and long-wave infrared regions are crucial for a variety of applications, including radiative cooling, thermal photovoltaic, and thermal imaging. In this regard, we propose, in this work, a design of an UBMA based on the heavily doped silicon (D-Si) and silicon carbide (SiC). The 3D finite-difference time-domain method is used, mainly, to numerically calculate the optical characteristics of the proposed UBMA. The absorber, which is made up of a periodic array of symmetrical multilayered square rings of D-Si and SiC, achieves high absorption with an average absorption of 95% over a wavelength range of 2.5–22 µm. This broad range of wavelength absorption is attained, encompassing the mid-, long-wave, and partial far-infrared regions. In addition to the materials' inherent absorption, the stimulation of magnetic polaritons, surface plasmon polaritons, localized surface plasmon resonance, and cavity resonance are responsible for the nearly perfect broadband absorption. Under normal incidence, the proposed UBMA is polarization-independent due to the symmetrical design of the absorber. Furthermore, the impact of the incidence angle on the absorption of transverse electric and transverse magnetic waves is examined. [ABSTRACT FROM AUTHOR]

Fiber combiner is an effective device to enhance the power level or broaden the spectral wavelengths through a single monolithic output aperture, by fusing multiple fibers together. This is particularly important in mid‐infrared (MIR) 2–5 µm range, in which the output power of a single laser is limited. Due to the high MIR transmission, chalcogenide glass is an ideal host for constructing MIR fiber combiner. In this study, we report the design, fabrication, and characterization of a homemade 3 × 1 chalcogenide glass fiber combiner. The fiber combiner includes a 3 × 1 As–S input fiber bundle and an output fiber. The input fiber bundle was made by tapering three As–S multimode fibers with a core diameter of 200 µm and a cladding diameter of 250 µm. The taper reduction ratio R was 2, and the length of the taper transition region was ∼2 cm. The output fiber with core diameter of 360 µm and cladding diameter of 570 µm was then spliced with the tapered end of the fiber bundle. The total length of the combiner was ∼53 cm. The measurement of power combination at 4.56 µm indicated that the transmission efficiency of three ports reached 80%, whereas the power combining efficiency of the combiner was measured to be ∼48%. In addition, efficient wavelength combining over one octave has been demonstrated, by launching three different lasers at 2.1, 3.39, and 4.56 µm through the 3 × 1 combiner. It proves that chalcogenide fiber combiner is promising for the applications of high‐level power combination and broadband wavelength combining in MIR 2–5 µm range. [ABSTRACT FROM AUTHOR]

Highly responsive, low noise, and inexpensive photodetectors that operate in the mid‐infrared (MIR) wavelength regime are in high demand for applications ranging from fundamental science to large scale industries. However, simultaneously achieving all this in one device architecture is very challenging. In this work, mercury telluride (HgTe) colloidal quantum dot (cQD) based photodetectors are systematically improved by the introduction of new metamaterial designs. The new designs are found by utilizing simulations. Thereby the structures are optimized to increase the responsivity and simultaneously decrease the noise spectral current density. This is achieved by focusing on improving the photogenerated charge carrier collection efficiency while reducing the active material volume without altering the near unity absorption. A standard metamaterial perfect absorber architecture based on disc resonators is used as a starting point for the optimization process. By optimizing the carrier extraction through contact engineering, resulting in a narrow slot metamaterial, an overall ≈13‐fold responsivity and ≈345‐fold detectivity increase is achieved. The final metamaterial design reaches a responsivity of 16.2 A W−1 and detectivity of 6×108 Jones at a wavelength of 2710 nm. The analysis therefore provides a route to improve the responsivity and noise characteristics of mid‐infrared photodetectors based on cost‐efficient colloidal quantum dots. [ABSTRACT FROM AUTHOR]

We demonstrate substrate-emitting resonant cavity interband cascade light emitting diodes (RCICLEDs) based on a single distributed Bragg reflector (DBR). These devices operate in continuous wave mode at room temperature. Compared to standard ICLEDs without a cavity, we achieved an 89% reduction in the emission spectrum width, as indicated by the Full Width Half Maximum (FWHM) of 70 nm. Furthermore, we observed far-field narrowing and improved thermal stability. A single DBR configuration allows the cavity length to be adjusted by adding refractive index-matched material to the top of the epitaxial structure after epitaxial growth. This modification effectively shifts the cavity response towards longer wavelengths. We fabricated emitters comprising two cavities of different lengths, resulting in the emission of two distinct spectral lines that can be independently controlled. This dual-color capability enables one of the emission lines to serve as a built-in reference channel, making these LEDs highly suitable for cost-effective gas-sensing applications. [ABSTRACT FROM AUTHOR]

Guided-mode resonance (GMR) is a compelling scheme for optical sensing of various physical quantities, which holds great promise in non-invasive detection of chemical and biological species. Current GMR sensors are mostly based on detection of environmental refractive index change, which presents a challenge for obtaining sensing selectivity as required in practical applications. In this work, we report on a prototype demonstration of using GMR for detecting molecular fingerprint absorption. In a waveguide grating made of a ZnSe layer sandwiched between a Cu film and an Au grating, a mid-infrared GMR is excited and tuned over a wide frequency range of 617.4 cm−1. Coupling of the GMR with a polydimethylsiloxane (PDMS) analyte film reveals the signature absorptions of CH2 group, whose vibrational signal is enhanced by a factor of 2.37 at a frequency detuning of 30 cm−1 between the GMR and the molecular vibration. Our theoretical analysis reveals that both near-field enhancement of GMR and its coupling strength with molecules are responsible for the molecular detection performance. These results suggest that angle-tuned GMR presents an alternative design paradigm for surface-enhanced infrared absorption spectroscopy (SEIRAS). [ABSTRACT FROM AUTHOR]

The early detection of gynecological cancers, which is critical for improving patient survival rates, is challenging because of the vague early symptoms and the diagnostic limitations of current approaches. This comprehensive review delves into the game-changing potential of infrared (IR) spectroscopy, a noninvasive technology used to transform the landscape of cancer diagnosis in gynecology. By collecting the distinctive vibrational frequencies of chemical bonds inside tissue samples, Fourier-transform infrared (FTIR) spectroscopy provides a 'molecular fingerprint' that outperforms existing diagnostic approaches. We highlight significant advances in this field, particularly the identification of discrete biomarker bands in the mid- and near-IR spectra. Proteins, lipids, carbohydrates, and nucleic acids exhibited different absorption patterns. These spectral signatures not only serve to distinguish between malignant and benign diseases, but also provide additional information regarding the cellular changes associated with cancer. To underscore the practical consequences of these findings, we examined studies in which IR spectroscopy demonstrated exceptional diagnostic accuracy. This review supports the use of IR spectroscopy in normal clinical practice, emphasizing its capacity to detect and comprehend the intricate molecular underpinnings of gynecological cancers. [ABSTRACT FROM AUTHOR]

Mid-infrared (mid-IR) photodetection is important for various applications, including biomedical diagnostics, security, chemical identification, and free-spacing optical communications. However, conventional "photon" mid-IR photodetectors require liquid nitrogen cooling (i.e., MCT). Furthermore, acquiring mid-IR spectra usually involves a complex and expensive Fourier Transform Infrared spectrometer, a tabletop instrument consisting of a meter-long interferometer and MCT detectors, which is not suitable for mobile and compact device applications. In this work, we present tunable photoresponsivity in the mid-IR wavelength in palladium diselenide (PdSe2) – molybdenum disulfide (MoS2) heterostructure field-effect transistors (FETs), operating at room temperature. Furthermore, we applied a tunable membrane cavity to modulate the Fabry–Pérot resonance to modulate the absorption spectrum of the device layer. We used a robust polyetherimide (PEI) membrane with CVD-grown graphene to electrically tune the membrane structure. For the next step, we will integrate the PdSe2-based photodetector and tunable membrane to increase detection sensitivity and spectrum tunability to realize the 'learning'-based spectroscopy. [ABSTRACT FROM AUTHOR]

Multi-band circular dichroism (CD) response and tunability on the chiral metasurface are crucial for this device's applications in sensing and detection. This work proposes a dual-band CD Au-CaF2-Au dimer elliptical metasurface absorber, where chiroptical sensing is realized by breaking the geometric symmetry between two ellipses. The proposed metasurface can achieve high CD values of 0.8 and −0.74 for the dual-band within the 3–5 μm region, and the CD values can be manipulated by independently adjusting the geometric parameters of the metasurface. Furthermore, a slotted nanocircuit is introduced onto the metasurface to enhance its tunability by manipulating the geometry parameter in the design process, and the related mechanism is explained using an equivalent circuit model. The simulation of the sensing model revealed that the slotted nanocircuit enhances the sensor's tunability and significantly improves its bandwidth and sensitivity, achieving peak enhancements at approximately 753 nm and 1311 nm/RIU, respectively. Due to the strong dual-band positive (and negative) responses of the CD values, flexible wavelength tunability, and nonlinear sensitivity enhancement, this design provides a new approach for the development and application of mid-infrared chiroptical devices. [ABSTRACT FROM AUTHOR]

This study proposes the design of a novel Metal-Insulator-Metal (MIM) nano-infrared emitter that uses a unique diamond-shaped grating to achieve selective infrared absorption. Diamond-shaped nano emitter (DNE) structure exhibits four narrow resonant peaks within key absorption windows such as short-wave infrared (SWIR) mid-wave infrared (MWIR), alongside with a wide absorption band in the Non-Transmissive Infrared Range (NTIR) for thermal camouflage applications compatible with radiative cooling. Moreover, the proposed DNE is polarization insensitive as it has an in-plane symmetric design. Using the 3D Finite-Difference Time-Domain (FDTD) simulations, we demonstrate the nanoantenna's superior performance characterized by its high absorption rates and tuned effective impedance matching. As of our knowledge, the findings suggest that this is the first time that a MIM structure achieved multiple narrow resonance peaks, located in SWIR and MWIR simultaneously, with a wide absorption range in NTIR. Represented DNE stands as a significant innovation in the field of stealth technology, providing a tunable, high-efficiency solution for managing and controlling thermal emissions across diverse applications. [ABSTRACT FROM AUTHOR]

Spectroscopy is a powerful tool to identify the specific fingerprints of analytes in a label-free way. However, conventional sensing methods face unavoidable barriers in analyzing trace-amount target molecules due to the difficulties of enhancing the broadband molecular absorption. Here, we propose a sensing scheme to achieve strong fingerprint absorption based on the angular-scanning strategy on an all-silicon metasurface. By integrating the mid-infrared and terahertz sensing units into a single metasurface, the sensor can efficiently identify 2,4-DNT with high sensitivity. The results reveal that the fingerprint peak in the enhanced fingerprint spectrum is formed by the linked envelope. It exhibits a significant enhancement factor exceeding 64-fold in the terahertz region and more than 55-fold in the mid-infrared region. Particularly, the corresponding identification limit of 2,4-DNT is 1.32 µg cm−2, respectively. Our study will provide a novel research idea in identifying trace-amount explosives and advance practical applications of absorption spectroscopy enhancement identification in civil and military security industries. [ABSTRACT FROM AUTHOR]

Plasmonic spectral filters composed of periodic nanostructured metal films offer novel opportunities for the development of multispectral imaging technologies in the mid-infrared region. However, traditional plasmonic filters, which typically feature simplistic structures such as nanoholes or nanorings, are constrained by a narrow bandpass and significant crosstalk, leading to limited practical performance. Filters designed using inverse techniques allow a substantial degree of freedom in creating intricate structures that align with desired spectral characteristics, including a quasi-square spectral profile, high transmission, wide full width at half maximum, and reduced crosstalk. In this study, we have utilized an inverse design algorithm to engineer high-performance bandpass filters for the mid-infrared range, achieving an average transmittance exceeding 80% within the bandpass window and below 10% in the stop band, which is comparable to that of commercial multilayer Bragg filters. Nanofabrication processes were employed to transfer the designed pattern into the gold film on ZnS substrate that is transparent in the mid-infrared range. The resulting filters exhibit spectral performance analogous to that of the inversely designed models, making them suitable for direct integration with mid-infrared photodetector arrays in multispectral imaging systems. [ABSTRACT FROM AUTHOR]

It is extremely challenging to accomplish second‐harmonic generation (SHG) in the whole mid‐infrared (MIR) region for oxide crystals due to their short IR absorption cutoff wavelengths. Herein, a new MIR nonlinear optical (NLO) crystal of K4ZnV5O15Cl (KZVC) is designed and synthesized by the aliovalent substitution of [VIIIO5] with [ZnIIO4Cl] based on the K2(VO)(V2O7) matrix. KZVC features an ordered 2D [ZnV5O15Cl]∞ layered structure comprising [ZnO4Cl] / [VO5] square pyramids and [VO4] tetrahedron as functional units. Importantly, KZVC shows excellently balanced performances of strong SHG responses (12 × KDP @ 1064 nm, 1.1 × AgGaS2 @ 2.05 µm), broad IR transparency range (0.52‒10 µm), congruent‐melting behavior, and highest laser‐induced damage threshold (LIDT) (60 × AgGaS2 @ 1064 nm) among the reported vanadates. Most remarkably, KZVC represents the first example in the oxide‐based IR NLO crystals that can achieve phase matching in a wide wavelength range extending from 1.8 to 10 µm, fully covering the important MIR atmospheric windows (3‒5 µm). [ABSTRACT FROM AUTHOR]

This study reports the experimental demonstration of the first waveguide-integrated SiGe modulator using a PIN diode operating in a wide spectral range of the mid-infrared region. At the wavelength of 10 µm, an extinction ratio up to 10 dB is obtained in injection regime and 3.2 dB in depletion regime. High speed operation is obtained, up to 1.5 GHz. Furthermore, the device can also operate as an integrated photodetector. Photodetection has thus been characterized from 5.2 µm to 10 µm wavelengths showing an internal responsivity around 1 mA/W, and a 3 dB electro-optical bandwidth of 32 MHz. These results show a significant advancement in integrated photodetectors and electro-optical modulators for mid-infrared spectroscopy. [ABSTRACT FROM AUTHOR]

Precision measurements on molecules in the strong fundamental bands are of great importance. An ac curate mid-infrared light source is a key for these studies. By locking the signal and pump light to an optical frequency comb, a high-precision continu ous-wave optical parametric oscillator source is built, and the mid-infrared frequency drift is deter mined to be less than 1 kHz. As a demonstration, saturated absorption spectroscopy of the R(14) (00011)–(00001) line of 13CO2 is measured, and the transition frequency is determined to be 68786813496(29) kHz. The frequency-stabilized mid-infrared laser source provides an opportunity for precision measurements of molecules in fundamental bands. [ABSTRACT FROM AUTHOR]

Background: Accurately determining the age and survival probabilities of adult mosquitoes is crucial for understanding parasite transmission, evaluating the effectiveness of control interventions and assessing disease risk in communities. This study was aimed at demonstrating the rapid identification of epidemiologically relevant age categories of Anopheles funestus, a major Afro-tropical malaria vector, through the innovative combination of infrared spectroscopy and machine learning, instead of the cumbersome practice of dissecting mosquito ovaries to estimate age based on parity status. Methods: Anopheles funestus larvae were collected in rural south-eastern Tanzania and reared in an insectary. Emerging adult females were sorted by age (1-16 days old) and preserved using silica gel. Polymerase chain reaction (PCR) confirmation was conducted using DNA extracted from mosquito legs to verify the presence of An. funestus and to eliminate undesired mosquitoes. Mid-infrared spectra were obtained by scanning the heads and thoraces of the mosquitoes using an attenuated total reflection-Fourier transform infrared (ATR-FT-IR) spectrometer. The spectra (N = 2084) were divided into two epidemiologically relevant age groups: 1-9 days (young, non-infectious) and 10-16 days (old, potentially infectious). The dimensionality of the spectra was reduced using principal component analysis, and then a set of machine learning and multi-layer perceptron (MLP) models were trained using the spectra to predict the mosquito age categories. Results: The best-performing model, XGBoost, achieved overall accuracy of 87%, with classification accuracy of 89% for young and 84% for old An. funestus. When the most important spectral features influencing the model performance were selected to train a new model, the overall accuracy increased slightly to 89%. The MLP model, utilizing the significant spectral features, achieved higher classification accuracy of 95% and 94% for the young and old An. funestus, respectively. After dimensionality reduction, the MLP achieved 93% accuracy for both age categories. Conclusions: This study shows how machine learning can quickly classify epidemiologically relevant age groups of An. funestus based on their mid-infrared spectra. Having been previously applied to An. gambiae, An. arabiensis and An. coluzzii, this demonstration on An. funestus underscores the potential of this low-cost, reagent-free technique for widespread use on all the major Afro-tropical malaria vectors. Future research should demonstrate how such machine-derived age classifications in field-collected mosquitoes correlate with malaria in human populations. [ABSTRACT FROM AUTHOR]

A 2.03 μm gas-discharge fiber laser based on atomic xenon is investigated. Various gas mixtures, such as He–Xe, Ar–Xe, He–Ar–Xe, and He–Ne, are studied by optical emission spectroscopy. The possibility of extending laser generation further into the mid-infrared range is analyzed. [ABSTRACT FROM AUTHOR]

High-power quantum cascade lasers (QCLs) have a wide application prospect. In this paper, a high-power high-beam-quality device with a large ridge width is demonstrated. The effect of different ridge widths on mode loss was studied, and the results showed that the mode loss decreased as the ridge width increased. Furthermore, as the width of the ridge increased, the temperature of the active region rose. In the experiment, the wafers were grown by metal–organic chemical vapor deposition (MOCVD), and the ridge width of the device was controlled by wet etching. A laser with a ridge width of 15 µm and a length of 5 mm achieved an output of 2.2 W under 288 K continuous wave (CW) operation, with a maximum slow-axis divergence angle of 27.2° and a device wavelength of 5 μm. The research results of this article promote the industrial production of base transverse mode QCL. [ABSTRACT FROM AUTHOR]

A dry-etched pedestal chalcogenide waveguide platform, designed for use in long-wave IR spectrometer applications, is demonstrated, fabricated and optically characterized. The optical layers were deposited on pre-patterned dry-etched silicon pedestals. An exceptionally low waveguide propagation loss was measured, at around 0.1 dB/cm at λ = 10 μm. The modal thermo-optic coefficient of the waveguide was experimentally estimated to be approximately 1.1 × 10−4 C−1 at λ = 1.63 μm, which is comparable to that of Si and GaAs. Waveguide spiral interferometers were fabricated, proving the potential for realization of more complex, chalcogenide-based, integrated photonic circuits. The combination of low propagation losses and a strong thermo-optic coefficient makes this platform an ideal candidate for utilization in on-chip tunable spectrometers in the long-wave IR wavelength band. [ABSTRACT FROM AUTHOR]

Photonic sensors utilize light–matter interaction to detect physical parameters accurately and efficiently. They exploit the interaction between photons and matter, with light propagating through an optical waveguide, creating an evanescent field beyond its surface. This field interacts with the surrounding medium, enabling the sensitive detection of changes in the refractive index or nearby substances. By modulating light properties like intensity, wavelength, or phase, these sensors detect target substances or environmental changes. Advancements in this technology enhance sensitivity, selectivity, and miniaturization, making photonic sensors invaluable across industries. Their ability to facilitate sensitive, non-intrusive, and remote monitoring fosters the development of smart, connected systems. This overview delves into the material platforms and waveguide structures crucial for developing highly sensitive photonic devices tailored for gas and biosensing applications. It is emphasized that both the material platform and waveguide geometry significantly impact the sensitivity of these devices. For instance, utilizing a slot waveguide geometry on silicon-on-insulator substrates not only enhances sensitivity but also reduces the device's footprint. This configuration proves particularly promising for applications in biosensing and gas sensing due to its superior performance characteristics. [ABSTRACT FROM AUTHOR]

Fundamental limits of thermal radiation are imposed by Kirchhoff's law, which assumes the electromagnetic reciprocity of a material or material system. Thus, breaking reciprocity can enable breaking barriers in thermal efficiency engineering. In this work, we present a subwavelength, 1D photonic crystal composed of Weyl semimetal and dielectric layers, whose structure was optimized to maximize the nonreciprocity of infrared radiation absorptance in a planar and compact design. To engineer an ultra-compact absorber structure that does not require gratings or prisms to couple light, we used a genetic algorithm (GA) to maximize nonreciprocity in the design globally, followed by the application of the numerical gradient ascent (GAGA) algorithm as a local optimization to further enhance the design. We chose Weyl semimetals as active layers in our design as they possess strong, intrinsic nonreciprocity, and do not require an external magnetic field. The resulting GAGA-generated 1D magnetophotonic crystal offers high nonreciprocity (quantified by absorptance contrast) while maintaining an ultra-compact design with much fewer layers than prior work. We account for both s- and p-polarized absorptance spectra to create a final, eight-layer design suitable for thermal applications, which simultaneously minimizes the parasitic, reciprocal absorptance of s-polarized light. [ABSTRACT FROM AUTHOR]

Mid‐infrared (mid‐IR) ultrafast lasers are widely employed in biomedicine, molecular spectroscopy, material processing, and nonlinear optics. With the improvement of fiber gain media and other fiber optical elements, low‐cost, compact, and high‐efficiency fiber lasers open up new opportunities for 2–4 µm pulse generations, which calls for a comprehensive review of their mode‐locking mechanisms, gain media, and fiber laser system performance. This paper, beginning with an overview of pulse‐generation technologies, reviews recent progress on 2–4 µm mid‐IR ultrafast fiber lasers, including Tm3+‐, Ho3+‐doped, Tm3+/Ho3+ codoped silicate fiber 2 µm lasers, and Er3+‐, Dy3+‐doped, and Ho3+/Pr3+ codoped ZBLAN fiber 2.5–4 µm lasers. Among them, the status of 2–4 µm ultrafast fiber lasers based on 2D material passive mode‐locking is emphatically discussed. Meanwhile, the novel advances on mode‐locking and gain fibers of mid‐IR ultrafast fiber lasers are explored. Furthermore, current and prospective applications of such laser systems are also introduced in detail. This review finally summarizes challenges associated with future development of mid‐IR ultrafast fiber lasers, which provides an outlook on how to achieve more desirable laser performance (e.g., higher average power, higher pulse energy, and longer emission wavelength) that can lead to more practical uses of such lasers. [ABSTRACT FROM AUTHOR]

Wide band gaps and large second harmonic generation (SHG) response are two crucial yet contradictory parameters for nonlinear optical (NLO) crystals. Herein, through exploring the influence of anion groups on structural crystallization dimension and space group, a series of new NLO Hg‐based chalcogenides AIIHgMIVS4 (AII = Sr, Ba, MIV = Si, Ge) with wide band gaps and large SHG responses have been successfully designed and synthesized. The structures of these compounds consist of 2D [HgMS4]2− (M = Si and Ge) layers composed of distorted (HgS4 and MS4) tetrahedra arranged alternately, and the layers are separated by eight‐coordinated A2+ (A = Sr and Ba) cations. Their band gaps and SHG responses meet the basic requirements (SHG > 1 × AgGaS2; Eg > 2.33 eV). Especially, SrHgSiS4 and SrHgGeS4 exhibit both large SHG effects (2 and 2.4 × AgGaS2) and wide band gaps (3.06 and 2.97 eV), respectively, indicating they are promising IR NLO crystals. This work opens a new avenue for new NLO material design to achieve the balance between strong SHG response and large band gaps. [ABSTRACT FROM AUTHOR]

Copyright of Electronic Science & Technology is the property of Electronic Science & Technology Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Using images at multiple mid‐infrared wavelengths, acquired in 2018 May using the Very Large Telescope Imager and Spectrometer (VISIR) instrument on ESO's Very Large Telescope (VLT), we study Jupiter's pole‐to‐pole thermal, chemical and aerosol structure in the troposphere and stratosphere. We confirm that the pattern of cool and cloudy anticyclonic zones and warm cloud‐free cyclonic belts persists throughout the mid‐latitudes, up to the polar boundaries, and evidence a strong correlation with the vertical maximum windshear and the locations of Jupiter's zonal jets. At high latitudes, VISIR images reveal a large region of mid‐infrared cooling poleward ∼64°N and ∼67°S extending from the upper troposphere to the stratosphere, co‐located with the reflective aerosols observed by JunoCam, and suggesting that aerosols play a key role in the radiative cooling at the poles. Comparison of zonal‐mean thermal properties and high‐resolution visible imaging from Juno allows us to study the variability of atmospheric properties as a function of altitude and jet boundaries, particularly in the cold southern polar vortex. However, the southern stratospheric polar vortex is partly masked by a warm mid‐infrared signature of the aurora. Co‐located with the southern main auroral oval, this warming results from the auroral precipitation and/or joule heating which heat the atmosphere and thus cause a significant stratospheric emission. This high emission results from a large enhancement of both ethane and acetylene in the polar region, reinforcing the evidence of enhanced ion‐related chemistry in Jupiter's auroral regions. Plain Language Summary: A fundamental inquiry driving NASA's Juno mission was the investigation of the potential changes of Jupiter's famous banded structure below the top most clouds. As NASA's Juno spacecraft lacks instrumentation sensitive to the mid‐infrared, we have used the ground‐based Very Large Telescope Imager and Spectrometer (VISIR) on ESO's Very Large Telescope (VLT) to support the mission since 2016. The 2018 May data set provides a comprehensive view of Jupiter's pole‐to‐pole thermal, chemical, and aerosol structure; including the Great Red Spot; and the auroral‐related heating in the southern polar stratosphere. We show that the alternating pattern of cool cloudy zones and warm cloud‐free belts correlate to the zonal winds locations, extends from the equator to the boundary of the polar vortices (∼64°N and ∼67°S). Comparing this ground‐based data set with Juno observations, we show that the polar regions experience radiative cooling from the upper troposphere to the stratosphere, probably induced by the reflective polar aerosols, and confined at the poles by the polar vortices. However, the southern stratospheric polar vortex is partly masked by a large auroral emission, a signature of an interaction between the magnetosphere and stratosphere of Jupiter, which causes a ∼20 K warming as deep as the middle stratosphere. Excess hydrocarbons within the polar domain reinforces the evidence of enhanced ion‐related chemistry in Jupiter's auroral regions, resulting from charged particles precipitating from the top of the atmosphere to lower altitudes. Key Points: Jupiter's belt/zone thermal structure extends from the equator to the edge of the polar vortices and correlates with the zonal jetsThe cold polar vortices coincides with reflective aerosols, suggesting dynamical entrainment by the northernmost and southernmost jetsTemporal evolution of the southern auroral hotspot shows a stratospheric cooling after a solar wind compression event [ABSTRACT FROM AUTHOR]

Laser ablation of bio‐tissues is the key technology of future surgeries, owing to the merits of submicron accuracy, non‐contact operation, and precision control assisted by automation and computer intelligence. Excellent efficiency, minimal collateral damage, biological safety, and tissue selectivity are the ideal parameters for delicate surgical applications. Here, by exploring the mid‐infrared (MIR) resonant ablation and the femtosecond cold processing, tissue ablation with multi‐millimeter depth and cellular collateral damage, enabled by a tabletop femtosecond MIR optical parametric amplifier operating at the amide‐I resonant wavelength of 6.1 µm, is demonstrated. Remarkably, the collateral damage is observed to be 15, <4, and <1 µm in the porcine cornea, sclera, and articular cartilage, respectively, with multi‐millimeter incision depth. In addition, preliminary proof‐of‐concept experiments of tissue‐selective ablation, microchannels on cartilage for drug delivery, laser glaucoma, keratotomy, neurologic tissue incision, dentin deep crater formation, and hypertrophic scarring ablation are demonstrated, which pave the way for high‐precision surgical applications with a tabletop solution. [ABSTRACT FROM AUTHOR]

We present a theoretical analysis of mid-infrared radiative recombination in InAs/GaSb superlattices (SLs). We employ a semi-analytical plane wave expansion method in conjunction with an 8-band k ⋅ p Hamiltonian to compute the SL electronic structure, paying careful attention to the identification and mitigation of spurious solutions. The calculated SL eigenstates are used directly to compute spontaneous emission spectra and the radiative recombination coefficient B . We elucidate the origin of the relatively large B coefficients in InAs/GaSb SLs which, despite the presence of spatially indirect (type-II-like) carrier confinement, are close to that of bulk InAs and compare favourably to those calculated for mid-infrared type-I pseudomorphic and metamorphic quantum well structures having comparable emission wavelengths. Our analysis explicitly quantifies the roles played by carrier localisation (specifically, partial delocalisation of bound electron states) and miniband formation (specifically, miniband occupation and optical selection rules) in determining the magnitude of B and its temperature dependence. We perform a high-throughput optimisation of the room temperature B coefficient in InAs/GaSb SLs across the 3.5–7 μ m wavelength range, quantifying the dependence of B on the relative thickness of the electron-confining InAs and hole-confining GaSb layers. This analysis provides guidance for the growth of optimised SLs for mid-infrared light emitters. Our results, combined with the expected low non-radiative Auger recombination rates in structures having spatially indirect electron and hole confinement, corroborate recently observed high output power in prototype InAs/GaSb SL inter-band cascade light-emitting diodes. [ABSTRACT FROM AUTHOR]

In this study, an analysis of the optical performance of two types of distributed Bragg reflector structures based on GaAs and InP material systems was carried out. The structures were designed for maximum performance at 4 µm with their reflectivity achieving between 80 and 90% with eight pairs of constituent layers. To further enhance the performance of these structures, additional Au layers were added at the bottom of the structure with Ti precoating applied to improve the adhesivity of the Au to the semiconductor substrate. The optimal range of Ti layer thickness resulting in the improvement of the maximum reflectivity was determined to be in between 5 and 15 nm. [ABSTRACT FROM AUTHOR]

To monitor the concentration of harmful gas methane (CH4) in the tunnel in real time, a high‐sensitivity measurement method for CH4 trace gas based on tunable diode laser absorption spectroscopy (TDLAS) is designed in this paper. An interband cascade laser with the emission wavelength of 3.29 μm was used to target noninterference CH4 lines at 3038.5 cm−1. To diminish the background noise of the sensor system, wavelength modulation spectroscopy combined with a second harmonic measurement technique was used in this work. Finally, 1.83 parts per billion in volume (ppbv) minimum measurement limit (MML) was obtained with a 4 s integration time based on an Allan‐Werle variance analysis, and the MML can be further improvedto ∼0.4 ppbv by increasing the integration time up to 104 s. Indoor and outdoor environmental data of CH4 acquired using the TDLAS sensor system are also reported. [ABSTRACT FROM AUTHOR]

In this research, we demonstrate a wavelength-stable continuous wave (CW) distributed feedback (DFB) quantum cascade laser (QCL) emitting at 7.2 μm using a surface metal grating approach without epitaxial regrowth. The deep metal grating provides an appropriate DFB coupling coefficient and enhanced thermal extraction, resulting in improved lasing performance and the realization of impressive wavelength stability. Quantitatively, the temperature tuning coefficient of the single-mode emission is only 0.54 nm/°C from 20 °C to 70 °C, and the current tuning coefficient of the single-mode emission is 3.2 nm/A from 1.0 A to 1.6 A. A DFB-QCL with a 2 mm cavity length exhibits a low threshold current of 0.6 A and a power of 1.1 W with a slope efficiency of 1 W/A in the CW mode at 300 K. A single-mode operation with a side mode suppression ratio of 33 dB and a single-lobed far-field without beam steering is obtained in the working temperature range of 20–70 °C The improved wavelength stability using a deep surface metal grating approach promises simplified fabrication, which is meaningful for the commercial applications of QCLs. [ABSTRACT FROM AUTHOR]

Graphene plasmonic modulators can manipulate the mid‐infrared light in transmission mode, which is currently challenging for traditional liquid crystal and digital micromirror devices, opening up a new avenue for infrared scene projection, infrared optical communication, and hyper spectra imaging. Nevertheless, their efficiencies are not high enough due to the single‐layer atomic thickness and low free carrier density of graphene. Here, it is demonstrated that the modulation efficiency can be significantly improved by enhancing the asymmetric light‐plasmon coupling. A general theoretical model is established to describe the modulation behaviors of the modulator, revealing the critical role of the asymmetric coupling rate. By using dielectric environment engineering and graphene structure design experimentally to enhance the asymmetric coupling rate from 0.45×1012 to 7.05×1012 s−1, the modulation efficiency has been improved from 4% to 41% at 1530 cm−1, while maintaining the bandwidth as large as 230 cm−1. The modulator outperforms previous transmission‐type graphene plasmonic modulators in both efficiency and bandwidth, presenting great potential in next‐generation infrared integrated photonics platforms. [ABSTRACT FROM AUTHOR]

In this article, we propose and numerically investigate a graphene-based electromechanically tunable perfect absorber design. The fundamental motivation is to demonstrate the electromechanically tunable feature in graphene metasurface at the mid-infrared regime, which otherwise exploited only the chemical potential feature in the literature. The structure consists of a gold grating on a gold substrate separated by an oxide spacer with an overlay of monolayer graphene with free-standing segments. By applying external DC voltages, the free-standing region of the graphene layer deflects, owing to the electrostatic force it experiences. This shifts the resonance absorption wavelength. In the mid-infrared region of 5–10 µm, a very low actuation voltage of 1.6 V displaces the graphene membrane by 1 nm, resulting in a wide shift of 60 nm in resonance wavelength. A continuous tunability with near-perfect absorption over a wavelength range of 200 nm for an applied voltage of only 7 V is demonstrated. At a voltage greater than 7 V, a mode hopping phenomenon is observed, hampering the perfect absorber operations with a shift in wavelengths. It is shown that the perfect absorption is again retained at some higher voltage. Such implementations hold promising applications in nanophotonics sensors, detectors, real-time beam steering, etc. [ABSTRACT FROM AUTHOR]

Self-doped silver selenide colloidal quantum dots (CQDs) that harness intraband transition as a major electronic transition in steady-state have emerged as an alternative mid-infrared (IR)-sensitive material to Pb or Hg-based CQDs. Comparable to the previously reported hot-injection and cation-exchange methods for the self-doped Ag2Se CQDs synthesis, a facile synthesis method of the self-doped AgxSe (x ≥ 2) CQDs is reported that does not require high reaction temperature, reduces the cost of material synthesis, and enables widespread use of the self-doped nontoxic CQDs in various environments and applications. Through careful investigation of the crystal structure, compositional analysis, mid-IR absorption, photoluminescence, and photocurrent response, we demonstrate that the as-synthesized AgxSe CQDs exhibit peculiar optical and electrical properties of the self-doped CQDs, potentially highlighting their application as IR-active materials for mid-IR-based optoelectronics. [ABSTRACT FROM AUTHOR]

Mid-infrared detection technology is widely used in military and civilian applications with its unique advantages. The filter is the core component of the mid-infrared detection system, realizing controllable modulation of its dual-band transmission peak is an important prerequisite for optimizing detector performance. In this paper, a cross-shaped microcavity structure metamaterial based on gold material is designed to achieve mid-infrared dual-band transmission. By changing the width of the microcavity and the width of the gap, the controllable modulation of the dual-band transmission peaks is achieved, corresponding to the dual-band ranges of 3.23 ~ 3.46 μm and 4.06 ~ 4.60 μm. The maximum transmission of the resonant transmission peaks λI and λII can reach 94.5% and 92.6%, respectively. The corresponding FOM is up to 17.70. This study provides a theoretical basis for the preparation of dual-band transmission filters in the mid-infrared band. [ABSTRACT FROM AUTHOR]

We fabricated a core-cladding Ge–Sb–Se glass fiber with a Ge12.5Sb15Se72.5 core and Ge15Sb10Se75 cladding, achieved a supercontinuum spectrum spanning from 2 μm to 9 μm by pumping the Ge–Sb–Se fiber with a core diameter of 11 μm using a femtosecond laser pump at 3.8 μm, and numerically simulated the supercontinuum generation using the generalized nonlinear Schrödinger equation. In particular, we investigate the effect of the different Raman response functions that were calculated using the traditional single Lorentzian model and a multiple vibrational mode model on the evolution of the supercontinuum by comparing the supercontinua obtained from simulation and experimental results. We demonstrate that the Raman response function generated by the multiple vibrational mode model captures the actual response behavior of the material, and the supercontinuum generated using this model has more accuracy. To the best of our knowledge, this is the first reported study on supercontinuum generation in Ge–Sb–Se fiber utilizing a Raman response function calculated using the multiple vibrational mode model. This significant advancement enables more accurate simulation of supercontinuum generation in fibers with a multi-peaked structured Raman gain spectrum and holds great potential for optimizing the performance of various mid-infrared supercontinuum sources. [ABSTRACT FROM AUTHOR]

Middle infrared spectral results obtained in‐situ by the Hayabusa2 MARA instrument are generally in‐line with previous results and a new comparison with sample C0137 returned from asteroid (162173) Ryugu, being similar to an aqueously altered CI1 chondrite. The mid‐IR spectrum of the boulder on Ryugu measured by MARA is shallower around 9 μm compared to the laboratory spectrum of C0137. Here we show that discontinuous, fine dust deposits can partially explain the differences in the spectral data and remain in agreement with the temperature observations of the boulder by MARA if an opaque dust layer covers less than 3% of the field of view. Such a presence of dust covering a low porosity boulder was discounted by previous analysis of the mid‐infrared MARA data which did not consider a highly porous boulder as we do here. Plain Language Summary: The Japanese Hayabusa2 space mission returned samples from asteroid Ryugu. Here we compare the spectra of the sample observed in the middle infrared (5–25 μm) with in‐situ observations in the part of the electromagnetic spectrum. We find differences between the spectra that can be explained by the presence of fine particles on the surface of Ryugu. Earlier works found that little to no dust can be present on Ryugu and we revisit these studies an derive an upper limit on the amount of dust consistent with the infrared observations. We find that less than 3% of the observed surface can be covered in an opaque dust layer which is likely concentrated in cracks and pores. Our results are consistent with the results of other studies that the amount of dust that a surface of an asteroid can retain decreases with its size. Key Points: The Ryugu sample C0137's mid‐IR spectrum shows differences to in‐situ observations by MARAThe differences can be explained by the presence of dust on the boulders of RyuguThermal modeling reveals that dust covering less than 3% of the MARA field of view is consistent with the MARA data [ABSTRACT FROM AUTHOR]

976 nm + 1976 nm dual-wavelength pumped Er-doped ZBLAN fiber lasers are generally accepted as the preferred solution for achieving 3.5 µm lasing. However, the 2 μm band excited state absorption from the upper lasing level (4F9/2 ⅖ 4F7/2) depletes the Er ions population inversion, reducing the pump quantum efficiency and limiting the power scaling. In this work, we demonstrate that the pump quantum efficiency can be effectively improved by using a long-wavelength pump with lower excited state absorption rate. A 3.5 µm Er-doped ZBLAN fiber laser was built and its performances at different pump wavelengths were experimentally investigated in detail. A maximum output power at 3.46 µm of ~ 7.2 W with slope efficiency (with respect to absorbed 1990 nm pump power) of 41.2% was obtained with an optimized pump wavelength of 1990 nm, and the pump quantum efficiency was increased to 0.957 compared with the 0.819 for the conventional 1976 nm pumping scheme. Further power scaling was only limited by the available 1990 nm pump power. A numerical simulation was implemented to evaluate the cross section of excited state absorption via a theoretical fitting of experimental results. The potential of further power scaling was also discussed, based on the developed model. [ABSTRACT FROM AUTHOR]

The acquisition of high-accuracy reflectance in mid-infrared channels is of great significance for the on-orbit cross-calibration of other bands using the mid-infrared band. However, due to the phenomenon that some sensors have a wide range of wavelengths covered by adjacent channels in the mid-infrared band, the traditional method of estimating the mid-infrared reflectivity assumes that the sea surface reflectivity in different mid-infrared bands is equal, which will lead to a large error during calculation. To solve this problem, this study proposes a nonlinear split-window algorithm involving ocean sun glint data to retrieve reflectivity of FY-3D/MERSI-2 channels 20. The results show that the variation range of sea surface reflectivity of channel 20 in the glint area is 10~25%, the mean value of the reflectivity difference obtained by the nonlinear split-window algorithm is 0.27%, and the RMSE is 0.0066. Among the main influencing factors, the atmospheric conditions have the greatest impact, and the effects of the uncertainties in the water vapor content and aerosol optical thickness on the calculation results are 1.16% and 0.34%, respectively. The initial value limits of the mid-infrared sea surface reflectivity also contribute approximately 0.84%, and their contribution to the uncertainty represents one of the main components. This work shows that the nonlinear split-window algorithm can calculate the infrared sea surface reflectivity with high accuracy and can be used as a reference for in-orbit cross-calibration between different bands. [ABSTRACT FROM AUTHOR]

SiOx thin films were prepared using magnetron sputtering with different O2 flow rates on a silicon substrate. The samples were characterized using Fourier transform infrared spectroscopy in transmission and reflection, covering a spectral range of 5 to 25 μm. By employing a multilayer model, the values of the complex refractive index that best fit the experimental transmission and reflection results were optimized using the Brendel–Bormann oscillator model. The results demonstrate the significance of selecting an appropriate range of O2 flow rates to modify the SiOx stoichiometry, as well as how the refractive index values can be altered between those of Si and SiO2 in the mid-infrared range. [ABSTRACT FROM AUTHOR]

We demonstrate the successful implementation of an artificial neural network (ANN) to eliminate detrimental spectral shifts imposed in the measurement of laser absorption spectrometers (LASs). Since LASs rely on the analysis of the spectral characteristics of biological and chemical molecules, their accuracy and precision is especially prone to the presence of unwanted spectral shift in the measured molecular absorption spectrum over the reference spectrum. In this paper, an ANN was applied to a scanning grating-based mid-infrared trace gas sensing system, which suffers from temperature-induced spectral shifts. Using the HITRAN database, we generated synthetic gas absorbance spectra with random spectral shifts for training and validation. The ANN was trained with these synthetic spectra to identify the occurrence of spectral shifts. Our experimental verification unambiguously proves that such an ANN can be an excellent tool to accurately retrieve the gas concentration from imprecise or distorted spectra of gas absorption. Due to the global shift of the measured gas absorption spectrum, the accuracy of the retrieved gas concentration using a typical least-mean-squares fitting algorithm was considerably degraded by 40.3%. However, when the gas concentration of the same measurement dataset was predicted by the proposed multilayer perceptron network, the sensing accuracy significantly improved by reducing the error to less than ±1% while preserving the sensing sensitivity. [ABSTRACT FROM AUTHOR]

Noise‐like pulses (NLPs) are becoming increasingly attractive for a variety of applications such as supercontinuum generation, materials processing, and low‐coherence spectral interferometry. Related research in the near‐infrared region is extensive, yet few studies have been reported in the mid‐infrared (MIR) region. Herein, a systematic investigation of MIR NLPs is made for the first time. An approach is presented by exploiting a polarization‐maintaining fluoride fiber in the mode‐locked oscillator to cause a polarization‐dependent delay between the orthogonal‐polarized components of intracavity circulating pulses, thus generating a series of ultrashort pulses which will eventually form a stable wave packet, namely, NLP. Numerical simulations based on the extended coupled nonlinear Schrödinger equations predict the generation of NLPs, and reveal key aspects of the pulse evolution. Experiments yield linearly polarized NLPs at 2.8 μm with a maximum average power of 498 mW and a spike width of 4.3 ps, corresponding to a pulse energy of 12 nJ. The experimental results are in good agreement with the simulation results. This work constitutes a major step toward the development of MIR ultrafast fiber lasers with NLPs output. [ABSTRACT FROM AUTHOR]

Integrated mid-infrared (MIR) photonics have various applications in optical fiber communication, spectral detection and identification, free-space communication, and light detection and ranging, etc. The MIR electro-optic (EO) modulator, which is one of the key components of MIR integrated photonic systems, has attracted a lot of research interests. In this paper, we review the reported integrated MIR EO modulators based on different modulation mechanisms and material platforms. The recent research progresses and challenges of MIR EO modulators are presented and discussed. The unique advantages and the corresponding applications of each type of MIR modulators are summarized as well. In the end, we provide our perspectives of a few areas in integrated MIR modulators that are worthy for research attention in future. [ABSTRACT FROM AUTHOR]

A metasurface is a two-dimensional structure with a subwavelength thickness that can be used to control electromagnetic waves. The integration of optical fibers and metasurfaces has received much attention in recent years. This integrated device has high flexibility and versatility. We propose an optical device based on fiber-integrated metasurfaces in the mid-infrared, which uses a hollow core anti-resonant fiber (HC-ARF) to confine light transmission in an air core. The integrated bilayer metasurfaces at the fiber end face can achieve transmissive modulation of the optical field emitted from the HC-ARF, and the Fano resonance excited by the metasurface can also be used to achieve refractive index (RI) sensing with high sensitivity and high figure of merit (FOM) in the mid-infrared band. In addition, we introduce a polydimethylsiloxane (PDMS) layer between the two metasurfaces; thus, we can achieve tunable function through temperature. This provides an integrated fiber multifunctional optical device in the mid-infrared band, which is expected to play an important role in the fields of high-power mid-infrared lasers, mid-infrared laser biomedicine, and gas trace detection. [ABSTRACT FROM AUTHOR]

This article proposes a temperature-controlled absorber based on VO2, which consists of five layers: a disk-shaped VO2 layer array, a dielectric layer, a circular hole VO2 array, a SiO2 layer, and a gold substrate from top to bottom. We optimized the thickness of the other four layers of the absorber, except for the gold layer, using PSO. After ten iterations, we determined that the optimal parameters for the top-to-bottom four-layer thicknesses were 0.183 μm, 0.452 μm, 0.557 μm and 1.994 μm. At this point, our absorber reached the optimal absorption parameters, and we plotted the absorption spectrum under these conditions. We found that the absorption rate at 29.1–47.2 THz was higher than 90%, and the absorption bandwidth was as high as 18.1 THZ. This frequency band covers most of the atmospheric window area (23–37.5 THz), so it will have good practicality. At 30.8 THz and 43.12 THz, there were perfect absorption peaks with absorption rates of 99.99% and 99.99%, respectively. We explained the cause of absorption from the perspective of electric field, and then we studied the change in the absorption curve of the absorber when the temperature of VO2 changed, and we can directly observe the changes in the electric field to explain this. Finally, we can tune the bandwidth and absorption rate of the absorber by changing the structure of the VO2 pattern. After comparing with other absorbers developed in recent years, our absorber still has good competitiveness, and we believe that our solution is expected to have outstanding performance in fields such as photothermal conversion and thermal stealth in the future. [ABSTRACT FROM AUTHOR]

Most of the traditional metasurfaces are passive and work with a single function, which limits their application in integrated devices. Phase change materials based metasurfaces offer flexible functions. In this work, we proposed a full-space tunable metasurface working at wavelength of 8.5 μm based on vanadium dioxide (VO2). When the VO2 is metallic, the metasurface works as a half-wave plate in reflective mode and the polarization conversion efficiency through the metasurface could be greater than 90% over a broadband range of 1.32 μm. When the VO2 is insulated, the metasurface works as a focusing lens in transmission mode with focusing efficiency up to 65% and full-width half-maximum (FWHM) of 0.67 λ. This result may provide a new route for the development of multifunctional devices. [ABSTRACT FROM AUTHOR]