Search

Knowledge of the pressure dependence of rock properties is useful for a wide range of earth science problems, especially related to pore pressure changes caused by fluid injection or withdrawal, as often occurs in groundwater, hydrocarbon and CO2 sequestration reservoirs. A long-standing problem is that theoretical models of velocity-pressure response often do not match laboratory measurements, and alternately, empirical regressions fit to such data do not extrapolate accurately to wider pressure ranges since they have little or no physical basis. Accurate determination of the dry rock frame properties at low effective pressure is a key aspect of the problem, particularly when ultrasonic laboratory measurements are not available in this pressure range. We present a new model to describe the pressure sensitivity of the bulk and shear moduli for uncemented sedimentary rocks. Our model incorporates effects of sedimentary compaction and critical porosity, including a relationship to account for porosity and density change with pressure. The model is tested on laboratory measurements for various rock samples and fits well over a wide range of pressures. The new velocity–pressure model should be useful for improved prediction and interpretation of pressure-dependent rock properties and seismic data. [ABSTRACT FROM AUTHOR]

The effect of rain events on effluent quality dynamics was studied at a full scale activated sludge wastewater treatment plant which has a process solution incorporating pre-denitrification in activated sludge with post-nitrification in trickling filters. The incoming wastewater flow varies significantly due to a combined sewer system. Changed flow conditions have an impact on the whole treatment process since the recirculation to the trickling filters is set by the hydraulic limitations of the secondary settlers. Apart from causing different hydraulic conditions in the plant, increased flow due to rain or snow-melting, changes the properties of the incoming wastewater which affects process performance and effluent quality, especially the particle removal efficiency. A comprehensive set of on-line and laboratory data were collected and analysed to assess the impact of rain events on the plant performance. [ABSTRACT FROM AUTHOR]

Floc characteristics were studied at a full scale activated sludge treatment plant with a unique process solution incorporating pre-denitrification with post-nitrification in nitrifying trickling filters. Since greater nitrogen removal is achieved when more secondary settled wastewater is recirculated to the trickling filters, the secondary settlers are always operated close to their maximal capacity. The flocculation and settling properties are therefore crucial and have an effect on the overall plant performance. Since the plant is operated at a short sludge age, these properties change quickly, resulting in variable maximal secondary settler capacity. The dynamics in floc structure and microbial community composition were studied and correlated to the secondary settler performance. Fluorescence in situ hybridisation was used to investigate the microbial community structure and their spatial distribution. The floc structure could to some extent be related to the flocculation and settling properties of the sludge. Even small differences had an influence suggesting that colloidal properties also play a significant role in determining the floc properties. No correlation between microbial community composition and settling properties could be established with the group-specific probes investigated. [ABSTRACT FROM AUTHOR]

Tighter discharge permits often require wastewater treatment plants to maximize utilization of available facilities in order to cost-effectively reach these goals. Important aspects are minimizing internal disturbances and using available information in a smart way to improve plant performance. In this study, flow control throughout a large highly automated wastewater treatment plant (WWTP) was implemented in order to reduce internal disturbances and to provide a firm foundation for more advanced process control. A modular flow control system was constructed based on existing instrumentation and soft sensor flow models. Modules were constructed for every unit process in water treatment and integrated into a plant- wide model. The flow control system is used to automatically control recirculation flows and bypass flows at the plant. The system was also successful in making accurate flow estimations at points in the plant where it is not possible to have conventional flow meter instrumentation. The system provides fault detection for physical flow measuring devices. The module construction allows easy adaptation for new unit processes added to the treatment plant. [ABSTRACT FROM AUTHOR]

Secondary settling dynamics at maximal capacity were investigated at a full scale wastewater treatment plant which utilizes a unique process solution incorporating pre-denitrification with postnitrification in nitrifying trickling filters. Since nitrogen removal is greater when more secondary effluent is recirculated to the trickling filters, the secondary settlers generally operate at close to their maximal capacity. The settling and flocculation properties of the activated sludge are therefore a major capacity-determining factor for plant operation. Due to the short sludge age, the flocculation properties, with respect to both thickening and clarification, can change quickly. The dynamics in these changes were studied and the factors that determine the maximal settling capacity were assessed. Solids flux curves were constructed from batch settling tests and compared with the actual maximal settling capacities. [ABSTRACT FROM AUTHOR]

Presents a diagnostic method designed to ascertain sensor deviation of online instrumentation used in wastewater treatment plants (WWTP). Importance of comparing the estimates with the corresponding online sensors; Use of soft sensors for sensor diagnosis.

The Rya WWTP in Goteborg, Sweden is a highly loaded activated sludgeplant which has been upgraded to remove nitrogen and to increase thebiologically treated flow by 33% to reduce bypassing. Severe site restrictions made it difficult to increase the plant area. This was solved using a compact process based on tertiary nitrification in trickling filters and recirculation to a highly loaded activated sludge unit for denitrification. The necessary volumes were achieved by expanding the plant upwards, thus making it possible to place the trickling filters a in part of the area occupied by the former aeration basins.The recirculation of trickling filter effluent made it necessary to double the secondary settler capacity. This was solved by retrofitting the existing settlers as stacked settlers with a second tray on topof the original basin. The considerations behind process selection and plant design and costs are described. (c) 1998 IAWQ. Published by Elsevier Science Ltd. [ABSTRACT FROM AUTHOR]