Search

The frequency and severity of extreme events related to climate change have intensified worldwide in the last decades. It is documented that increasing extreme rainfall and flooding cause more nutrient runoff into waterbodies, initiating numerous harmful algal bloom (HAB) events, especially in fragile ecosystems. We analyze the dramatic economic damage of one of these episodes in Mar Menor, the largest salt-water lagoon in Europe. We show that when the public perceived the severity of environmental degradation, the return on housing investment was 43% lower in the surroundings than in similar neighboring zones 6 years after the HAB (2015). This represents a loss in housing wealth of more than 4000 million euros, around ten times the gains of changing from dry-farming to irrigated crops, which makes this ecosystem fragile. Hence, we quantify some of the economic consequences of ecological deterioration linked to episodes of Global Climate Change. [ABSTRACT FROM AUTHOR]

Sulfide mining wastes may lead to severe environmental and human health risks. This study aims to use geochemical and ecotoxicological indicators for the assessment of the ecological risks of potentially toxic elements (PTEs) in the San Quintín mining group to categorize wastes prior to mining restoration. Ecotoxicity was evaluated using crustacean (Dahpnia magna, Thamnocephalus platyurus) and algae (Raphidocelis subcapitata) bioassays. The geochemical and mineralogical results suggested that the mining residues underwent intense weathering processes, with active processes of acidity generation and metal mobility. Total PTEs concentrations indicated that the mining materials were extremely polluted, with Pb, Zn and Cd geoaccumulation index (Igeo) values higher than 5 in more than 90% of the samples. The pollution load index (PLI) showed average values of 18.1, which classifies them as very highly polluted. The toxicity tests showed a higher toxicity for plants than crustaceans, being the highest values of toxicity related to toxic elements (Pb, Cd and Zn), electrical conductivity and to pH. This paper presents for the first time the combination of indices in the categorization of mining waste prior to its restoration. The combination of them has made it possible to categorize the waste and adapt the restoration and remediation procedures. [ABSTRACT FROM AUTHOR]

This study aims to use geochemical, mineralogical, ecotoxicological and biological indicators for a comprehensive assessment of the ecological risks related to the mobility, ecotoxicity and bioavailability of potentially harmful elements in the Lousal mining district. Particularly, toxicity was evaluated using four assays: algae, cytotoxicity assays with HaCaT cell line (dermal), earthworms and Daphnia magna. The geochemical and mineralogical characterization of the studied area shows that the mine wastes underwent intense weathering processes, producing important contamination of the adjacent soils, which also led to the release and mobilization of PHEs into nearby water courses. Total PTE results indicate that the soils affected by mining activities were highly contaminated with As and Cu, while Zn and Pb content ranged from low to very high, depending on the analyzed samples. Cadmium levels were found to be very low in most of the soil samples. The test using Daphnia magna was the most sensitive bioassay, while the Eisenia foetida test was the least sensitive. Except for the LOS07 soil sample, the rest of the soils were classified as "High acute toxicity" and "Very high acute toxicity" for aquatic systems. The results in HACaT cells showed results similar to the ecotoxicological bioassays. The application of biotests, together with geochemical and mineralogical characterization, is a very useful tool to establish the degree of contamination and the environmental risk of potentially harmful elements. [ABSTRACT FROM AUTHOR]

A study was carried out to evaluate the absorption of potentially toxic elements from mining Technosols by three types of vegetable plants (broccoli (Brassica oleracea var. italica), lettuce (Lactuca sativa) and onion (Allium cepa)), the different parts of which are intended for human and farm animal consumption (leaves, roots, edible parts). The preliminary results obtained highlight the importance of the design of the mining Technosols used for agricultural purposes, obtained from soils and sediments of mining origin and amended with residues of high calcium carbonate concentrations (limestone filler and construction and demolition wastes). The experiment was carried out in a greenhouse, and the total metal(loid)s concentration (As, Pb, Cd, Cu, Fe, Mn and Zn) of the soil, rhizosphere, aqueous leachates and plant samples was monitored, the translocation and bioconcentration factors (TF and BCF, respectively) being calculated. The characterization of the soils included a mobilization study in media simulating different environmental conditions that can affect these soils and predicting the differences in behavior of each Technosol. The results obtained showed that the levels of potentially toxic elements present in the cultivated species are within the range of values mentioned in the literature when they were cultivated in soils with calcareous amendments. However, when the plants were grown in contaminated soils, the potentially toxic elements levels varied greatly according to the species, being higher in onions than in lettuce. Experiments with the use of lime filler or construction and demolition wastes for soil remediation result in crops that, in principle, do not present health risks and are similar in development to those grown on non-contaminated soil. [ABSTRACT FROM AUTHOR]

This study discusses an estimate of the risk associated with the intake of soil contaminated by lead, based on the nature of the source, through a detailed study of the parameters that can influence the bioaccessibility of the element from soil intake. Statistical variables that are related to the solubility and bioavailability of lead are used for this purpose. This includes considering the values of pH, electrical conductivity, particle size, mineralogical composition and the bioaccessibility/bioasimilability of lead. Obtaining an algorithm, represented by different probability distributions of the parameters considered, needs a thorough knowledge of the source materials, which may allow estimating/evaluating the intake health risk provided by the concentration of the metal present. The selected materials are from sites affected by mining activities in the Region of Murcia (SE of Spain) and soils in nearby areas, using a total of 186 samples. Soil samples, once screened and homogenized, were parameterized by determining pH, electrical conductivity, granulometry, both total and water-extractable Pb content. Oral bioaccessibility tests were also performed, and a detailed mineralogical analysis by X-ray diffraction was carried out. [ABSTRACT FROM AUTHOR]

In recent decades, the percentage increase in water use on a global scale has exceeded twice that of population growth. The increase in groundwater exploitation poses a severe risk for the availability of water resources, and the resulting resource scarcity is a major concern in most countries of the Mediterranean region. Water samples with high B concentrations and negative I i SP 11 sp B values are probably influenced by agricultural activities; for water samples characterized by positive I i SP 11 sp B values and low B contents, a slight contamination by sewage effluents cannot be excluded. [Extracted from the article]

A total of 120 sediments from 12 cores of Portman Bay (SE Spain) were studied to assess the degree of contamination and ecological risk related to potentially toxic elements (PTEs) by combining a geochemical and mineralogical characterization with the assessment of the bioavailable forms of trace metals (As, Cd, Cu, Fe, Pb, Zn). With this purpose, sediment contamination was assessed by total and water-soluble content, and potential bioavailability by the simultaneously extracted metals and acid-volatile sulphides (SEM-AVS) approach, and by an oral bioaccessibility extraction procedure. The sediments are essentially sandy (>80%). The most important minerals are: iron phases such as siderite, iron oxides and hydroxides and pyrite; clay minerals such as clinochlore, greenalite and biotite; and quartz. Occasionally, jarosite and carbonates (calcite and dolomite) appear. The total PTEs content is high whereas the sediments generally have a very low soluble PTE content. The SEM/AVS ratio is less than unity in most samples, indicating that there is enough sulphur so that if there was a release of metals, they could precipitate as sulphides. After the bioaccessibility extraction, the results showed that zinc and cadmium are more bioaccessible in the intestinal environment (alkaline) while the rest of the elements have greater availability in the stomach (acid). [ABSTRACT FROM AUTHOR]

Purpose: The present study deals with the geochemical fractions of Pb, Cd, Zn, Cu and As present on profiles using chemical simple extraction process. This work was conducted on Portman Bay, located in the SE Spain and strongly affected by mining activities.Materials and methods: Four simple extractions were applied to selected samples in order to evaluate the potential mobility of metals. X-ray diffraction (XRD) was applied to the characterisation of samples and the residues remaining after each extraction, providing additional information about the sediment phases carrying the elements studied.Results and discussion: The results obtained after the extractions suggested that the highest potentially toxic element (PTE) content was obtained in the oxidising medium. The mineralogical composition is an important factor that should be taken into account in the evaluation of PTE mobility, firstly because the mineral phases react differently in the proposed situations depending on their chemical nature, and secondly, because the presence of a particular phase depends on the degree of weathering.Conclusions: The evaluation of PTE mobility and mineralogical composition under different environmental conditions may be very important in the execution of restoration projects which could involve dredging and mobilisation of materials. [ABSTRACT FROM AUTHOR]

Purpose: This study was undertaken to determine the feasibility of using three aquatic macrophytes, Phragmites australis, Juncus effusus and Iris pseudacorus, to phytoextract potentially toxic elements (PTEs) from a contaminated area by mining activities. Materials and methods: An artificial pond was constructed with two topsoils (yellow and black samples) collected from Portman Bay. In order to simulate the mixing with carbonate materials, which naturally occurs in this area, a stabilisation approach was applied by mixing with 30 % of limestone filler. Three replicates of each type of soil have been prepared in pots for the selected species. The total PTEs content (arsenic, cadmium, copper, iron, lead and zinc) was determined and the bioconcentration factor (BCF) and transfer factor (TF) calculated. Results and discussion: Soil samples showed high PTEs content as a result of mining activities. As regards the root contents, the PTEs is higher in yellow samples (YS) than in black ones, because in these samples the PTEs content that could be mobilised is higher. The BCF results were higher than unity for arsenic, copper, lead and cadmium for I. pseudacorus and P. australis growing on YS soil. Overall, copper and manganese showed a larger number of plants with BCF higher than unity. The PTEs content in leaves is low, and the TF results are lower than unity in almost all samples. Conclusions: The results indicate that it is possible to use the selected species for phytostabilisation of soils contaminated with PTEs. J. effusus, P. australis and I. pseudacorus could be considered as tolerant, and natural or artificial wetlands containing these species could be used for remediation purposes. [ABSTRACT FROM AUTHOR]

Purpose: Mining activities generate large amounts of wastes that may contain potentially toxic elements (PTE), which, if released into the environment, may cause air, water and soil pollution long after mining operations have ceased. This paper describes the environmental relevance of efflorescences, topsoils and surface waters from the abandoned mine of Sierra Minera of Cartagena-La Unión, SE Spain. The exposure of the population to arsenic and the associated risk were also assessed. Materials and methods: A total of 10 topsoils and surface waters and 11 efflorescences affected at varying degrees by mining activities were studied. The total potentially toxic element content (As, Cd, Cu, Fe, Pb and Zn) was determined in all samples. In addition, the mineralogical composition of solid samples was determined by X-ray diffraction and some efflorescences were also analysed using a scanning electron microscopy-energy dispersive X-ray spectrometer. Finally, an arsenic-intake risk assessment was carried out, both as regards carcinogenic and non-carcinogenic effects and considering the total and the bioaccesible As content. Results and discussion: The study area is heavily polluted as a result of historical mining and processing activities, during which time great amounts of wastes were produced, characterised by a high PTE content, acidic pH and minerals resulting from supergene alteration. The supergene mineralogical assemblages include soluble metal salts, mainly sulphates, iron hydroxysulphates and iron oxyhydroxides, all of which form ochreous precipitates. Topsoil samples showed risk values and hazard quotients higher than the reference levels, particularly for children. In the efflorescences, these values were lower but still unacceptable. Conclusions: The efflorescences are of significance for monitoring purposes because they are involved in cycles of retention release of hydrogen ions, sulphate and potentially toxic elements. In addition, in a semi-arid climate, such as the study area, these minerals contribute to our understanding of the response of the system to episodic rainfall events. In general, it was observed that the arsenic in collected samples represent a potential risk for human health through ingestion. [ABSTRACT FROM AUTHOR]

The objective of this study was to determine the As and Sb contents in soils from the Murcia Region of Spain and the possible relationship between the mineralogical composition, soil properties, and As and Sb concentrations. In this study, 490 samples were selected from areas with different characteristics in order to study As and Sb variability. Results show that As and Sb concentrations are positively correlated with the phyllosilicate and quartz content but negatively correlated with the calcite content. The generic reference level (GRL) for these elements was determined according to the Spanish legislation. Established GRL values vary according to the established mineralogical groups, suggesting that GRL has to be determined considering the lithological characteristics of the study area. [ABSTRACT FROM AUTHOR]

The leachability and ecotoxicity of potentially toxic elements (PTE) eluting from technosols formed of soils affected by mining activities and limestone filler were evaluated. A total of four contaminated soils affected by opencast mining were selected and mixed with limestone filler at three percentages: 10, 20 and 30 %, providing 12 stabilised samples. Total and soluble PTE content (As, Cd, Cu, Fe, Pb and Zn) was determined in all the samples and the Microtox® bioassay was applied to determine the ecotoxicological effect. The stabilised material had a neutral pH and low soluble PTE concentration. Moreover, the ecotoxicological assay indicated the presence of low toxicity levels in the stabilised samples. The applied bioassay can be considered a good tool for the screening of PTE contamination in areas affected by mining activities, while providing information about possible attenuation processes. [ABSTRACT FROM PUBLISHER]

The effects of calcination (400-1200°C) on pig bones have been studied using powder X-ray diffraction ( XRD) and secondary modifications, such as color change and weight loss. The characterisation by powder XRD confirmed the presence of the crystalline phase of hydroxyapatite, and comparison of the results obtained at different temperatures suggested that at 650°C, all the organic components and carbonate substitutions were completely removed. Accordingly, these samples were white. In addition, the crystallinity degree and the crystallite size progressively increased with the calcination temperature until 650°C, remaining stable until 1200°C. Below 650°C, bone samples presented organic compounds, resulting in background noise in the diffractogram and gray or black color. In addition, impurities in the lattice correspond to low crystallite sizes. [ABSTRACT FROM AUTHOR]

Purpose: The objective of this work was to evaluate the effectiveness of a plant bioassay (Phytotoxkit®) for screening ecotoxicological risks in sediments affected by mining activities. Materials and methods: A total of 42 sediment samples affected by mining activities were studied, including 39 sediment samples from the Sierra Minera, Spain, an area affected by old extraction procedures, and three sediments from an area affected by opencast mining. These three samples were then mixed with limestone filler at 10, 20 and 30 %, providing nine stabilised samples. The total and soluble metal(loid) content (As, Cd, Cu, Fe, Pb and Zn) was determined in all samples, and the Phytotoxkit® bioassay was applied to determine the ecotoxicological effect of this procedure. Results and discussion: The stabilised material had a neutral pH and low soluble metal(loid) concentration, similar to that of samples in which a natural attenuation process had taken place because of mixing with surrounding carbonate-rich materials. An ecotoxicological survey identified the low toxicity levels of the stabilised samples. Conclusions: The applied bioassay is a good tool for screening metal(loid) contamination in areas affected by mining activities, since it provides information on both natural and simulated attenuation processes. The mixing of sediments with limestone filler could be applied to the remediation of zones affected by mining activities, because the toxicological effect on the tested organisms in the stabilised sediments was reduced significantly and the metal(loid) content was diminished. [ABSTRACT FROM AUTHOR]

The distribution of trace elements throughout mining areas is an important issue because abandoned tailings could be a major source of environmental pollution. In order to analyze the spatial variation of trace elements in a zone where mining activities took place and to identify pollution sources in the study area, a three-step study was carried out at a regional, at a local, and a detailed scale. In addition, a conceptual model of trace elements dispersion was established and confirmed by a geographic information system. The results obtained allowed to establish points affected by primary, secondary, and tertiary contamination, according to their proximity to contamination sources and as a function of attenuation processes which could take place in the studied area. [ABSTRACT FROM AUTHOR]

The activation of the pozzolanic reaction of fly ash in portland cement paste immersed in sulfate solution has been studied. Mixtures of two Spanish fly ashes (ASTM class F) with 0%, 15%, and 35% replacement of portland cement by fly ash were immersed in Na[sub 2]SO[sub 4] solution, of 2880 ppm SO[sub 4, sup 2-] concentration, for a period of 90 days. The resistance of the different mixtures to the sulfate attack was evaluated using the Koch-Steinegger test. The results showed that all of the mixtures were sulfate resistant, despite the high Al[sub 2]O[sub 3] content of the fly ash. The diffusion of SO[sub 4, sup 2-] and Na[sup +] ions through the pore solution activated the pozzolanic reactivity of the fly ashes, causing microstructural changes, which were characterized by X-ray diffraction (XRD), mercury intrusion porosimetry (MIP), and scanning electron microscopy (SEM). As a result, the flexural strength of the mixtures increased, principally for the fly ash of a lower particle size and 35% of addition. [ABSTRACT FROM AUTHOR]

The geochemical characterization of the mine deposits and soils in metal mining areas is essential in order to develop an effective mine reclamation strategy. The determination of total potentially toxic element (PTE) content, together with the application of chemical extraction procedures, can give insight into the behavior of contaminants after the application of different mine reclamation solutions, as well as identify the areas where urgent action is needed. This work presents a practical application to the evaluation of the pollution potential of trace elements in soils affected by mining activities, to be used in metallic mine reclamation. The PTE behavior was assessed by single extractions in order to simulate four environmental conditions: PTE mobility under rainfall conditions, acid mine drainage, reducing conditions, and plant uptake. The spatial distribution of contaminants in the study area was evaluated by determination of PTE total content in soil samples. Trace elements with high natural mobility, such as Zn, appeared concentrated at water and sediment discharge areas, while As, Pb, and Cu contents were higher near the mine wastes. The results obtained after the extractions suggested that the highest PTE content was extracted in the complexing–reducing medium, due to the dissolution of secondary sulfates and Fe3+ oxyhydroxides and the subsequent release of PTEs associated with those mineral phases. Reclamation strategies applied in the study area should promote efficient water drainage, infiltration, and subsuperficial water circulation in order to maintain oxidant conditions in the soil. The methodology applied in this study may constitute a valuable tool to define the geochemical constraints in metal mining areas, as well as help to develop appropriate mine reclamation solutions. [ABSTRACT FROM AUTHOR]

Abandoned mine wastes, containing high sulfide contents, are of particular concern because of the formation of acid mine drainage (AMD), becoming an active and harmful point source of potentially toxic elements (PTEs) to the environment. A detailed evaluation of the chemical and mineralogical composition of mining wastes is necessary to determine effective remediation actions. Due to the high amount of generated wastes as a result of mining and processing activities, the cost and time consumed for this characterization are limiting. Hence, efficient tools could be applied to predict the composition of these wastes and their spatial distribution. This study aims to determine the physico-chemical characterization of wastes from mining activities using geochemical and geophysical techniques. The obtained results, both geochemical and geophysical, allow us to locate areas with a high potential risk of contamination by As in an economic and simple way, and enable us to design detailed geochemical sampling campaigns. In addition, the fact that there are conductive fractures in depth suggests the possible circulation of contaminants through them as well as the preferential lines of circulation. [ABSTRACT FROM AUTHOR]

This work presents an integral methodological approach to assess the environmental potential hazards posed by metals and metalloids hosted by spolic technosols derived from old tailings from a mining operation for galena (PbS, with high Ag contents)-sphalerite (ZnS, with a varied cohort of trace elements contents) in central Spain. We studied the total and soluble concentrations and spatial distribution of Pb, Zn, Cd, As, and Fe and the mineralogy of these soils, as well as an ecotoxicological evaluation by means of bioassays. The indices assessing soil contamination such as pollution load index (PI) and natural mobility index (NMI) have been calculated. Furthermore, the phytotoxic effect of the soil samples has been determined and a chronic sediment toxicity test using the benthic ostracod Heterocypris incongruens was applied. The geochemical study of 33 spolic technosols samples indicates large to extremely large metal and metalloid total contents: up to 48,600 mg kg−1 Pb, 34,000 mg kg−1 Zn, 500 mg kg−1 Cd, and 1000 mg kg−1 As. Given that sphalerite is usually the most important host mineral for cadmium in hydrothermal mineral deposits, there is a high correlation (R = 0.75) between this element and Zn. On the other hand, despite being two metallogenically intertwined elements in ore deposits, Pb and Zn show a less significant relationship, which can be attributed both to heterogeneities in the mineralogical composition of the veins, and to the complex history of the mineral concentration process: In the older process, the interest was only for Pb, meanwhile in the late period, the interest was focused in Zn. The Phytotoxkit® bioassay showed that soils with high PTEs presented very high toxicity, particularly the inhibition germination is related to Pb, As, and Cd content and root inhibition with Pb content. Both indexes were correlated with pH and electrical conductivity; samples with lower pH and higher soluble salt content are those with higher seed germination inhibition and root growth inhibition. On the other hand, the Ostracodtoxkit® bioassay showed very high sensitivity, with 100% mortality. The applied bioassays confirmed the soil toxicity and it is highly recommended to complement the results from environmental chemistry with results from bioassays, in order to provide a more complete and relevant information on the bioavailability of contaminants and to characterize the risk of contaminated areas. [ABSTRACT FROM AUTHOR]