Search

Introduction: Previously we demonstrated that elevated serum CYFRA 21 − 1 is a reliable diagnostic and prognostic biomarker for biliary tract cancers. This study aims to explore the diagnostic performance of bile CYFRA 21 − 1 (bCYFRA 21 − 1) in discriminating malignant biliary obstruction (MBO) caused by cholangiocarcinoma (CCA). Methods: 77 CCA patients ((17 intrahepatic CCA (iCCA), 49 perihilar CCA (pCCA) and 11 distal CCA (dCCA)) and 43 benign patients with biliary obstruction were enrolled. Serum and bile levels of CYFRA 21 − 1, carcinoembryonic antigen (CEA) and carbohydrate antigen 19 − 9 (CA19-9) were quantified. Diagnostic performances of these biomarkers were estimated by receiver operator characteristic curves. Subgroups analysis of these tumor markers among CCA subtypes was performed. Results: High bCYFRA 21 − 1 (cut-off value of 59.25 ng/mL with sensitivity of 0.889 and specificity of 0.750) and high bile to serum ratio of CYFRA 21 − 1 (b/sCYFRA 21 − 1, cut-off value of 31.55 with sensitivity of 0.741 and specificity of 0.778) achieved better diagnostic performance than any other biomarker in discriminating MBO. Subgroup analysis revealed that bCYFRA 21 − 1 was significantly elevated in all CCA subtypes; moreover b/sCYFRA 21 − 1 was upregulated in pCCA and dCCA (the mean b/sCYFRA 21 − 1 of pCCA was highest among CCA subtypes: 57.90, IQR 29.82-112.27). Conclusions: Both high biliary CYFRA 21 − 1 and high bile to serum ratio of CYFRA 21 − 1 were reliable diagnostic biomarkers for MBO caused by CCA. [ABSTRACT FROM AUTHOR]

Sports equipment crafted from flexible mechanical metamaterials offers advantages due to its lightweight, comfort, and energy absorption, enhancing athletes' well-being and optimizing their competitive performance. The utilization of metamaterials in sports gear like insoles, protective equipment, and helmets has garnered increasing attention. In comparison to traditional truss and honeycomb metamaterials, the triply periodic minimal surface lattice structure stands out due to its parametric design capabilities, enabling controllable performance. Furthermore, the use of flexible materials empowers this structure to endure significant deformation while boasting a higher energy absorption capacity. Consequently, this study first introduces a parametric method based on the modeling equation of the triply periodic minimal surface structure and homogenization theory simulation. Experimental results demonstrate the efficacy of this method in designing triply periodic minimal surface lattice structures with a controllable and adjustable elastic modulus. Subsequently, the uniform flexible triply periodic minimal surface lattice structure is fabricated using laser selective sintering thermoplastic polyurethane technology. Compression tests and finite element simulations analyze the hyperelastic response characteristics, including the element type, deformation behavior, elastic modulus, and energy absorption performance, elucidating the stress–strain curve of the flexible lattice structure. Upon analyzing the compressive mechanical properties of the uniform flexible triply periodic minimal surface structure, it is evident that the structure's geometric shape and volume fraction predominantly influence its mechanical properties. Consequently, we delve into the advantages of gradient and hybrid lattice structure designs concerning their elasticity, energy absorption, and shock absorption. [ABSTRACT FROM AUTHOR]

Mechanical metamaterials with ultralight and ultrastrong mechanical properties are extensively employed in various industrial sectors, with three-periodic minimal surface (TPMS) structures gaining significant research attention due to their symmetry, equation-driven characteristics, and exceptional mechanical properties. Compared to traditional lattice structures, TPMS structures exhibit superior mechanical performance. The mechanical properties of TPMS structures depend on the base material, structural porosity (volume fraction), and wall thickness. Hard rigid lattice structures such as Gyroid, diamond, and primitive exhibit outstanding performance in terms of elastic modulus, energy absorption, heat dissipation, and heat transfer. Flexible TPMS lattice structures, on the other hand, offer higher elasticity and recoverable large deformations, drawing attention for use in applications such as seat cushions and helmet impact-absorbing layers. Conventional fabrication methods often fail to guarantee the quality of TPMS structure samples, and additive manufacturing technology provides a new avenue. Selective laser sintering (SLS) has successfully been used to process various materials. However, due to the layer-by-layer manufacturing process, it cannot eliminate the anisotropy caused by interlayer bonding, which impacts the mechanical properties of 3D-printed parts. This paper introduces a process data-driven optimization design approach for TPMS structure geometry by adjusting volume fraction gradients to overcome the elastic anisotropy of 3D-printed isotropic lattice structures. Experimental validation and analysis are conducted using TPMS structures fabricated using TPU material via SLS. Furthermore, the advantages of volume fraction gradient-designed TPMS structures in functions such as energy absorption and heat dissipation are explored. [ABSTRACT FROM AUTHOR]

Despite numerous polymerization investigations, flexural characteristics of acrylic resins have not been widely explored. The mechanical characteristics of polymers have received little attention. Photosensitive resins (PSR) may be subjected to hazardous conditions when employed in many technological applications. It is critical to understand how the environment influences resin service life. This study evaluates the effect of the surrounding atmosphere on the mechanical attributes of PSR, including flexural strength, maximum force resistance, flexural strain, and morphological changes. The samples in circular rings were manufactured via 3D printing and divided into four groups according to their contact environment (exposure in water (EW), exposure in coffee (EC), exposure in salt (ES), and exposure in the air (EA)). The circular rings were first modeled via solid works and experimentally fabricated via a 3D printer parallel to the printer platform. Our experimental results demonstrate that the surrounding exposed environment and time duration significantly impact the mechanical properties of PSR. However, the mechanical characteristics of PSR are almost consistent when measured at different time intervals in an air environment. However, long-term solution exposure in liquid affects the mechanical properties of the fabricated rings. Mechanical flexural resilience decreases with increasing exposure time. [ABSTRACT FROM AUTHOR]

Oxidative stress can adversely affect the health status of the body, more specifically by causing intestinal damage by disrupting the permeability of the intestinal barrier. This is closely related to intestinal epithelial cell apoptosis caused by the mass production of reactive oxygen species (ROS). Baicalin (Bai) is a major active ingredient in Chinese traditional herbal medicine that has antioxidant, anti-inflammatory, and anti-cancer properties. The purpose of this study was to explore the underlying mechanisms by which Bai protects against hydrogen peroxide (H2O2)-induced intestinal injury in vitro. Our results indicated that H2O2 treatment caused injury to IPEC-J2 cells, resulting in their apoptosis. However, Bai treatment attenuated H2O2-induced IPEC-J2 cell damage by up-regulating the mRNA and protein expression of ZO-1, Occludin, and Claudin1. Besides, Bai treatment prevented H2O2-induced ROS and MDA production and increased the activities of antioxidant enzymes (SOD, CAT, and GSH-PX). Moreover, Bai treatment also attenuated H2O2-induced apoptosis in IPEC-J2 cells by down-regulating the mRNA expression of Caspase-3 and Caspase-9 and up-regulating the mRNA expression of FAS and Bax, which are involved in the inhibition of mitochondrial pathways. The expression of Nrf2 increased after treatment with H2O2, and Bai can alleviate this phenomenon. Meanwhile, Bai down-regulated the ratio of phosphorylated AMPK to unphosphorylated AMPK, which is indicative of the mRNA abundance of antioxidant-related genes. In addition, knockdown of AMPK by short-hairpin RNA (shRNA) significantly reduced the protein levels of AMPK and Nrf2, increased the percentage of apoptotic cells, and abrogated Bai-mediated protection against oxidative stress. Collectively, our results indicated that Bai attenuated H2O2-induced cell injury and apoptosis in IPEC-J2 cells through improving the antioxidant capacity through the inhibition of the oxidative stress-mediated AMPK/Nrf2 signaling pathway. [ABSTRACT FROM AUTHOR]

The aim of this study was to evaluate the association between Ferredoxin 1 (FDX1) expression and the prognostic survival of tumor patients and predict the efficacy of immunotherapy response to antitumor drug sensitivity. FDX1 plays an oncogenic role in thirty-three types of tumors, based on TCGA and GEO databases, and further experimental validation in vitro was provided through multiple cell lines. FDX1 was expressed highly in multiple types of cancer and differently linked to the survival prognosis of tumorous patients. A high phosphorylation level was correlated with the FDX1 site of S177 in lung cancer. FDX1 exhibited a significant association with infiltrated cancer-associated fibroblasts and CD8+ T cells. Moreover, FDX1 demonstrated correlations with immune and molecular subtypes, as well as functional enrichments in GO/KEGG pathways. Additionally, FDX1 displayed relationships with the tumor mutational burden (TMB), microsatellite instability (MSI), DNA methylation, and RNA and DNA synthesis (RNAss/DNAss) within the tumor microenvironment. Notably, FDX1 exhibited a strong connection with immune checkpoint genes in the co-expression network. The validity of these findings was further confirmed through Western blotting, RT-qPCR, and flow cytometry experiments conducted on WM115 and A375 tumor cells. Elevated FDX1 expression has been linked to the enhanced effectiveness of PD-L1 blockade immunotherapy in melanoma, as observed in the GSE22155 and GSE172320 cohorts. Autodocking simulations have suggested that FDX1 may influence drug resistance by affecting the binding sites of antitumor drugs. Collectively, these findings propose that FDX1 could serve as a novel and valuable biomarker and represent an immunotherapeutic target for augmenting immune responses in various human cancers when used in combination with immune checkpoint inhibitors. [ABSTRACT FROM AUTHOR]

Background: Hippocalcin‐like 1 (HPCAL1) is involved in the development of several cancer types. However, our understanding of the HPCAL1 activity in cholangiocarcinoma (CCA) remains limited. Methods: Two microarray datasets were used to screen for differentially expressed genes (DEGs) involved in the development of CCA. The Cancer Genome Atlas (TCGA)/Gene Expression Omnibus (GEO) database was integrated to determine the prognostic significance of DEGs in CCA. The association between clinical characteristics and HPCAL1 expression levels was initially explored to assess the clinical profile of CCA. The prognostic value of HPCAL1 overexpression in the validation cohort was analyzed, followed by Gene Ontology (GO) term analysis and Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway analysis of HPCAL1. Results: Three upregulated genes and 10 downregulated genes were detected from two microarray‐based screenings. High expression of HPCAL1 as a poor prognostic factor of CCA was validated using TCGA/GEO integrated database and our database. Univariate and multivariate analyses along with Kaplan–Meier survival analysis showed that high HPCAL1 expression was an independent factor affecting the overall survival and relapse‐free survival in patients with CCA. The high expression of HPCAL1 was significantly associated with cancer antigen 125 (CA‐125) levels, number of tumors, lymph node invasion, and TNM stage. Analysis of the enriched GO terms and KEGG pathways revealed that the high expression of HPCAL1 was involved in the critical biological processes and molecular pathways, including modulation by a host of symbiont processes, the clathrin coat, actinin binding, and Rap1 signaling pathways. Conclusion: HPCAL1 was enriched in CCA in our study and has the potential to be applied in the identification of patients with CCA with an unfavorable prognosis. [ABSTRACT FROM AUTHOR]

As environment-friendly building materials, earth materials are attracting significant attention because of their favorable hygrothermal properties. In this study, the earth materials in northwest Sichuan were tested and curves of thermal conductivity and water vapor permeability with relative humidity were obtained. The function curves and constants of the two coefficients were substituted into the verified nonstationary model of heat and moisture transfer in rammed earth walls and indoor air for calculation. The difference in the calculation results when the hygrothermal parameters are functions and constants were analyzed, and the influence of the non-constant hygrothermal parameters on the heat and moisture transfer in rammed earth walls, was obtained. The test results show that thermal conductivity is linearly related to moisture content, and water vapor permeability has a small variation in the relative humidity range of 0–60% and increases exponentially above 60%. The calculation results indicate that the non-constant hygrothermal parameters have little influence on the internal surface temperature of the rammed earth walls and Mianyang City's indoor air temperature and humidity during the summer and winter. The heat transfer on the internal surface will be underestimated by using a non-constant for the hygrothermal parameter when the moisture content of the wall is low, and vice versa. In hot-humid areas or seasons with large differences in temperature and humidity between indoors and outdoors, non-constant hygrothermal parameters have a more obvious effect on heat transfer on the internal surface of the wall. The results of this study demonstrate the necessity of parameter testing. [ABSTRACT FROM AUTHOR]

Despite the large number of studies addressing the effect of acrylic resin polymerization concerning flexural properties, limited research has been conducted on the manufacturing impact on a polymer's mechanical properties. Photosensitive resinous materials are used in various engineering applications where they may be exposed to multiple detrimental environments during their lifetime. Therefore, there is a need to understand the impact of an environment on the service life of resins. Thus, flexural tests were conducted to study the effects of exposure time and angle on the flexural strength of resins. Herein, the main objective was to explore the strength, stability, and flexural durability of photosensitive resin (EPIC-2000ST) fabricated at different exposure times (E) and angle deviation varying from 0° to 85° with a 5° increment. The samples in circular rings were manufactured and divided into five groups according to their exposure time (E): 10 s, 20 s, 30 s, 40 s, and 50 s. In each exposure time, we designed rings via SolidWorks software and experimentally fabricated at different oblique angles (OA) varying from 0° to 85° with a 5° increment during each fabrication, i.e., OA = 0°, 5°, 10°, 15°, 20°, 25°, 30°, 35°, 40°, 45°, 50°, 55°, 60°, 65°, 70°, 75°, 80°, and 85°. Flexural strength was evaluated using a three-point bending test. Optical electron microscopy was used to examines the samples' exterior, interior, and ruptured surfaces. Our experimental analysis shows that flexural strength was significantly enhanced by increasing exposure time and at higher oblique angles. However, at lower angles and less exposure time, mechanical flexural resilience declines. [ABSTRACT FROM AUTHOR]

As a traditional building material, rammed earth has gained popularity for its environmental friendliness and reusability. In this study, the hygrothermal performance of the wall material of traditional rammed-earth dwellings was experimentally measured, and the indoor and outdoor temperature and humidity variations of rammed-earth dwellings were experimentally measured for five days. Considering temperature and relative humidity as the driving potential for heat and humidity transfer and air penetration, an unsteady model of heat and humidity transfer of the rammed-earth wall and indoor and outdoor air was established. The accuracy of the model was verified using the measured data. The model was used to determine the rationality of the wall thickness in local rammed-earth dwellings. Based on data from typical local meteorological years, the indoor temperature and humidity changes in rammed-earth dwellings were numerically predicted. The average indoor temperature and humidity in summer were 26.56°C and 69.74%, and the variances were 3.26 and 43.17, respectively. The average indoor temperature and humidity in winter were 7.25°C and 83.62%, and the variances were 1.14 and 14.83, respectively. The research results demonstrate that a rammed-earth wall significantly reduces the influence of outdoor temperature fluctuation on the indoor thermal environment, with good humidity regulating performance. [ABSTRACT FROM AUTHOR]

This work tackles the problem of estimating depth from a single RGB image of a scene. To model the complex relationship between depth and monocular images, we propose a fully convolutional neural network that incorporates skip connections along with encoding and decoding stages to output consistent and detailed depth maps. Additionally, our model is a single convolutional architecture that does not use post-processing strategies; thus, it equires relatively less computational power and time to train when compared to more complex works. Experimental analysis and evaluation with a variety of losses and accuracies show that the end-to-end training process results in a model that performs better than or similar to many past architectures trained on the same dataset. [ABSTRACT FROM AUTHOR]