Search

The widespread use of Light Detection and Ranging (LiDAR) technology has led to a surge in three-dimensional point cloud data; although, it also poses challenges in terms of data storage and indexing. Efficient storage and management of LiDAR data are prerequisites for data processing and analysis for various LiDAR-based scientific applications. Traditional relational database management systems and centralized file storage struggle to meet the storage, scaling, and specific query requirements of massive point cloud data. However, NoSQL databases, known for their scalability, speed, and cost-effectiveness, provide a viable solution. In this study, a 3D point cloud indexing strategy for mobile LiDAR point cloud data that integrates Hilbert curves, R*-trees, and B+-trees was proposed to support MongoDB-based point cloud storage and querying from the following aspects: (1) partitioning the point cloud using an adaptive space partitioning strategy to improve the I/O efficiency and ensure data locality; (2) encoding partitions using Hilbert curves to construct global indices; (3) constructing local indexes (R*-trees) for each point cloud partition so that MongoDB can natively support indexing of point cloud data; and (4) a MongoDB-oriented storage structure design based on a hierarchical indexing structure. We evaluated the efficacy of chunked point cloud data storage with MongoDB for spatial querying and found that the proposed storage strategy provides higher data encoding, index construction and retrieval speeds, and more scalable storage structures to support efficient point cloud spatial query processing compared to many mainstream point cloud indexing strategies and database systems. [ABSTRACT FROM AUTHOR]

The presence of abundant spatio-temporal information based on the location of mobile objects in publicly accessible GPS mobile devices makes it crucial to collect, analyze, and mine such information. Therefore, it is necessary to index a large volume of trajectory data to facilitate efficient trajectory retrieval and access. It is difficult for existing indexing methods that primarily rely on data-driven indexing structures (such as R-Tree) or space-driven indexing structures (such as Quadtree) to support efficient analysis and computation of data based on spatio-temporal range queries as a service basis, especially when applied to massive trajectory data. In this study, we propose a massive GPS data storage and indexing method based on uneven spatial segmentation and trajectory optimization segmentation. Primarily, the method divides GPS trajectories in a large spatio-temporal data space into multiple MBR sequences by greedy algorithm. Then, a hybrid indexing model for segmented trajectories is constructed to form a global spatio-temporal segmentation scheme, called HHBITS index, to achieve hierarchical organization of trajectory data. Eventually, a spatio-temporal range query processing method is proposed based on this index. This paper implements and evaluates the index in MongoDB and compares it with two other spatio-temporal composite indexes for performing spatio-temporal range queries efficiently. The experimental results show that the method in this paper has high performance in responding to spatio-temporal queries on large-scale trajectory data. [ABSTRACT FROM AUTHOR]

SAR imagery plays a crucial role in geological and environmental monitoring, particularly in highland mountainous regions. However, inherent geometric distortions in SAR images often undermine the precision of remote sensing analyses. Accurately identifying and classifying these distortions is key to analyzing their origins and enhancing the quality and accuracy of monitoring efforts. While the layover and shadow map (LSM) approach is commonly utilized to identify distortions, it falls short in classifying subtle ones. This study introduces a novel LSM ground-range slope (LG) method, tailored for the refined identification of minor distortions to augment the LSM approach. We implemented the LG method on Sentinel-1 SAR imagery from the tri-junction area where the Xiaojiang, Pudu, and Jinsha rivers converge at the Yunnan-Sichuan border. By comparing effective monitoring-point densities, we evaluated and validated traditional methods—LSM, R-Index, and P-NG—against the LG method. The LG method demonstrates superior performance in discriminating subtle distortions within complex terrains through its secondary classification process, which allows for precise and comprehensive recognition of geometric distortions. Furthermore, our research examines the impact of varying slope parameters during the classification process on the accuracy of distortion identification. This study addresses significant gaps in recognizing geometric distortions and lays a foundation for more precise SAR imagery analysis in complex geographic settings. [ABSTRACT FROM AUTHOR]

Soil water content is a critical environmental parameter in research and practice, though various technological and contextual constraints limit its estimation in arid areas with vegetation cover. This study combined the multitemporal remote sensing data of Sentinel-1 and Landsat 8 to conduct an inversion study on surface soil water content under low vegetation cover in Nagqu, central Tibetan Plateau. Four vegetation indices (NDVI, ARVI, EVI, and RVI) were extracted from optical remote sensing data. A water cloud model was used to eliminate the influence of the vegetation layer on the backscattering coefficient associated with vegetation cover, and a predictive model suitable for the Nagqu area was constructed. The water cloud model effectively incorporated a vegetation index instead of vegetation water content. We found that VV polarization was more suitable for soil water content inversion than VH polarization. Among the four vegetation indices, the soil water content inversion model constructed with RVI under VV polarization had the best fit (R2 = 0.8212; RMSE = 6.30). The second-best fit was observed for vegetation water content-NDVI (R2 = 0.8201). The soil water content inversion models all had an R2 > 0.6, regardless of the vegetation index used, though the RVI had the best fitting effect, indicating that this vegetation index is highly applicable in the water cloud model, as a substitute for vegetation water content, and is expected to perform well in similar study sites. [ABSTRACT FROM AUTHOR]

Landslides are one of the most common geological disasters in China, characterized by suddenness and uncertainty. Traditional methods are not sufficient for the accurate identification, early warning, and forecasting of landslide disasters. As high-resolution remote sensing satellites and interferometric synthetic aperture radar (InSAR) surface deformation monitoring technology have been leaping forward, the traditional methods of landslide monitoring data sources are limited, and there have been few effective methods to excavate the characteristics of the spatial distribution of landslide hazards and their triggering factors, etc. In this study, an area extending 10 km from the VII isobar of the Gengma earthquake was taken as the study area, and 13 evaluation factors were screened out by integrating the factors of InSAR surface deformation, topography, and geological environment. Landslide susceptibility was evaluated through the Bayesian optimized convolutional neural network (BO-CNN), and the Bayesian optimized random forests (BO-RF) and particle swarm optimization support vector machines (PSO-SVM) models were selected for comparative analyses. The accuracy of the model was evaluated by using three indices, including the ROC curve, the AUC value, and the FR value. Specifically, the ROC curves of PSO-SVM, BO-RF, and BO-CNN were close to the upper-left corner, indicating excellent model performance. Moreover, the AUC values were computed as 0.9388, 0.9529, and 0.9535, respectively, and the FR value of landslides in the high susceptibility area of BO-CNN reached up to 14.9 and exceeded those of PSO-SVM and BO-RF, respectively. Furthermore, the mentioned values of the SVM and BO-RF models were 4.55 and 3.69 higher. The experimental results indicated that, compared with other models, the BO-CNN model used in this study had a better effect on landslide susceptibility evaluation, and the research results are of great significance to the disaster prevention and mitigation measures of local governments. [ABSTRACT FROM AUTHOR]

Purpose: Placement prominence is a multidimensional concept. Previous studies have defined and operationalized prominence in different ways, and no studies have tried to systematically examine what should and should not be counted as prominence. This study aims to fill this gap. Design/methodology/approach: Using a content analysis of six short films and a survey study on 129 Chinese young adults, this study systematically examined 13 dimensions of placement prominence on the memory of placed brands. Findings: Factor analysis has reduced the 13 dimensions into five factors: contextual, narrative, sensory, exposure and spatial prominence. Fuzzy-set qualitative comparative analysis (QCA) software was used to conduct a contrarian case analysis and test for predictive validity. This was followed by a QCA to identify the optimal configurations of the five factors that may lead to a high recognition of the placed brands. The optimal configurations were also contrasted across two gender and brand familiarity groups. While the optimal configurations of prominence on brand memory for male and female participants were largely the same, the combinations differed between participants with low and high brand familiarity. Originality/value: Previous studies in product placement usually operationalize prominence with a few dominant dimensions intuitively though several other dimensions, and their interactions could also affect the prominence level. To the best of authors' knowledge, this is the first study that used multiple dimensions of prominence configurations to identify paths that may lead to low and high brand memory. The empirical results contribute to the theory and understanding of the effect of prominence on brand memory and provide guidance to brand managers in determining which prominence configuration is the most suitable for achieving their promotional objective. [ABSTRACT FROM AUTHOR]

Tropospheric delay error must be reduced during interferometric synthetic aperture radar (InSAR) measurement. Depending on different geographical environments, an appropriate correction method should be selected to improve the accuracy of InSAR deformation monitoring. In this study, surface deformation monitoring was conducted in a high mountain gorge region in Yunnan Province, China, using Sentinel-1A images of ascending and descending tracks. The tropospheric delay in the InSAR interferogram was corrected using the Linear, Generic Atmospheric Correction Online Service for InSAR (GACOS) and ERA-5 meteorological reanalysis data (ERA5) methods. The correction effect was evaluated by combining phase standard deviation, semi-variance function, elevation correlation, and global navigation satellite system (GNSS) deformation monitoring results. The mean value of the phase standard deviation (Aver) of the linear correction interferogram and the threshold value (sill) of the semi-variogram were reduced by –20.98% and –41%, respectively, while the accuracy of the InSAR deformation points near the GNSS site was increased by 58%. The results showed that the three methods reduced the tropospheric delay error of InSAR deformation monitoring by different degrees in low-latitude mountains and valleys. Linear correction was the best at alleviating the tropospheric delay, followed by GACOS, while ERA5 had poor correction stability. [ABSTRACT FROM AUTHOR]

Spaceborne Global Navigation Satellite System Reflectometry (GNSS-R) is a new remote sensing technology that uses GNSS signals reflected from the Earth's surface to estimate geophysical parameters. Because of its unique advantages such as high temporal and spatial resolutions, low observation cost, wide coverage and all-weather operation, it has been widely used in land and ocean remote sensing fields. Ocean wind monitoring is the main objective of the recently launched Cyclone GNSS (CYGNSS). In previous studies, wind speed was usually retrieved using features extracted from delay-Doppler maps (DDMs) and empirical geophysical model functions (GMFs). However, it is a challenge to employ the GMF method if using multiple sea state parameters as model input. Therefore, in this article, we propose an improved deep learning network framework to retrieve global sea surface wind speed using spaceborne GNSS-R data, named GloWS-Net. GloWS-Net considers the fusion of auxiliary information including ocean swell significant wave height (SWH), sea surface rainfall and wave direction to build an end-to-end wind speed retrieval model. In order to verify the improvement of the proposed model, ERA5 and Cross-Calibrated Multi-Platform (CCMP) wind data were used as reference for extensive testing to evaluate the wind speed retrieval performance of the GloWS-Net model and previous models (i.e., GMF, fully connected network (FCN) and convolutional neural network (CNN)). The results show that, when using ERA5 winds as ground truth, the root mean square error (RMSE) of the proposed GloWS-Net model is 23.98% better than that of the MVE method. Although the GloWS-Net model and the FCN model have similar RMSE (1.92 m/s), the mean absolute percentage error (MAPE) of the former is improved by 16.56%; when using CCMP winds as ground truth, the RMSE of the proposed GloWS-Net model is 2.16 m/s, which is 20.27% better than the MVE method. Compared with the FCN model, the MAPE is improved by 17.75%. Meanwhile, the GloWS-Net outperforms the FCN, traditional CNN, modified CNN (MCNN) and CyGNSSnet models in global wind speed retrieval especially at high wind speeds. [ABSTRACT FROM AUTHOR]

Multi-temporal interferometric synthetic aperture radar (MT-InSAR) techniques analyze a study area using a set of SAR image data composed of time series, reaching millimeter surface subsidence accuracy. To effectively acquire the subsidence information in low-coherence areas without obvious features in non-urban areas, an MT-InSAR technique, called SqueeSAR, is proposed to improve the density of the subsidence points in the study area by fusing the distributed scatterers (DS). However, SqueeSAR filters the DS points individually during spatial adaptive filtering, which requires significant computer memory, which leads to low processing efficiency, and faces great challenges in large-area InSAR processing. We propose a spatially adaptive filtering parallelization strategy based on the Spark distributed computing engine in a Hadoop distributed cluster environment, which splits the different DS pixel point data into different computing nodes for parallel processing and effectively improves the filtering algorithm's performance. To evaluate the effectiveness and accuracy of the proposed method, we conducted a performance evaluation and accuracy verification in and around the main city of Kunming with the original Sentinel-1A SLC data provided by ESA. Additionally, parallel calculation was performed in a YARN cluster comprising three computing nodes, which improved the performance of the filtering algorithm by a factor of 2.15, without affecting the filtering accuracy. [ABSTRACT FROM AUTHOR]

Kunming city is located in the middle of Yunnan Province. Due to large-scale groundwater exploitation and urban development in recent years, this area has been affected by surface subsidence. In this paper, Interferometric Synthetic Aperture Radar (InSAR) and Global Navigation Satellite System (GNSS) data are used to monitor the surface subsidence in Kunming city area for better analysis and understanding. The study used data of Sentinel-1A from 2018 to 2020 with atmospheric correction based on GACOS to calculate the average annual subsidence rate in Kunming city area, and the results show that the maximum subsidence rate is 48 mm/year. The subsidence obtained by InSAR is compared with the vertical deformation information obtained by eight GNSS stations in continuous operation in the study area. The subsidence rate trend show by the two methods is consistent, which further verifies the validity of InSAR data to reflect the local deformation. Experimental results shown that the eastern and northeastern Dianchi lake areas were affected by underground resources mining, and the induced surface subsidence characteristics were obvious, with the surface subsidence rate reachde 48 mm/year and 37 mm/year respectively. The Kunyang Phosphate Mine also had different degrees of mining subsidence disaster, with the maximum subsidence rate reached 36 mm/year. The subsidence rate of InSAR and GNSS has the same trend on the whole. However, GNSS sites are generally located in stable areas, the settlement amount obtained in the same time period is somewhat different from that of InSAR. [ABSTRACT FROM AUTHOR]

Time-series interferometric synthetic aperture radar (TS-InSAR) is often affected by tropospheric artifacts caused by temporal and spatial variability in the atmospheric refractive index. Conventional temporal and spatial filtering cannot effectively distinguish topography-related stratified delays, leading to biased estimates of the deformation phases. Here, we propose a TS-InSAR atmospheric delay correction method based on ERA-5; the robustness and accuracy of ERA-5 data under the influence of different atmospheric delays were explored. Notably, (1) wet delay was the main factor affecting tropospheric delay within the interferogram; the higher spatial and temporal resolution of ERA-5 can capture the wet delay signal better than MERRA-2. (2) The proposed method can mitigate the atmospheric delay component in the interferogram; the average standard deviation (STD) reduction for the Radarsat-2 and Sentinel-1A interferograms were 19.68 and 14.75%, respectively. (3) Compared to the empirical linear model, the correlation between the stratified delays estimated by the two methods reached 0.73. We applied this method for the first time to a ground subsidence study in the Yuxi Basin and successfully detected three subsidence centers. We analyzed and discussed ground deformation causes based on rainfall and fault zones. Finally, we verified the accuracy of the proposed method by using leveling monitoring data. [ABSTRACT FROM AUTHOR]

Shadow indexes can effectively and easily detect shadows in remote sensing images. Although various shadow indexes are used, there is no consensus regarding the optimal one. The evaluation criteria used to determine the performance of shadow indexes are relatively homogeneous. A multi-criteria evaluation of widely used shadow indexes is necessary to analyse the application performance of each index in different scenarios. The eight most common shadow indexes were selected for this study. In addition to the standard visual inspection and accuracy assessment criteria, the cosine of solar incidence (cosi) was introduced to evaluate the sensitivity of the indexes to illumination intensity. Furthermore, in order to evaluate the separability of shadows and confusable objects, the interquartile range (IQR) of shadows and confusable objects was used to calculate the 1.5IQR separation ratio (1.5IQRSR). The multi-scale evaluation included mountain and urban scenarios, with the sensitivity to illumination intensity used to assess mountain scenarios and the capacity to separate confusable objects used to assess urban scenarios. The results obtained for each evaluation criterion were aggregated to form the multi-criteria evaluation score of the shadow indexes. The results show that the combinational shadow index (CSI), shadow detector index (SDI), and shadow index (SI) perform relatively well for each evaluation criterion. SI and CSI had the highest shadow detection accuracy in mountain and urban areas, respectively. The shadow enhancement index (SEI) and CSI had relatively high sensitivity to illumination intensity, especially CSI. In addition, CSI has the highest water separability but low separability for blue and dark impervious surfaces. SDI and SI have high separability for confusable objects, but they are ineffective in separating water bodies and less sensitive to illumination intensity. In summary, CSI, SDI, and SI excel in many application contexts, whereas the performances of the remaining five indexes were similar in all respects. [ABSTRACT FROM AUTHOR]

As impacted by long-term underground resource exploitation and urban shallow space construction and expansion, land subsidence has turned out to be a major ground geological disaster in the central-northern Henan Plain. For the construction of the Central Plains urban agglomeration, it is required to efficiently and comprehensively grasp the information of land subsidence in the North-central Henan Plain, as well as effectively prevent and control the rapid development of subsidence. In the present study, the Land subsidence in North-central Henan Plain was initially monitored and analyzed by employing the SBAS-InSAR technology with 40 scenes of C-band Sentinel-1 data (March 2017-August 2018). As revealed from the results, the central-northern North Henan Plain consists of 6 main subsidence areas, exhibiting a maximum subsidence rate of -116 mm/a, as primarily located in the southwestern region of Baiquan Town, Hui County, Xinxiang City. To verify the results achieved by the InSAR monitoring, a GPS monitoring network and a leveling route were deployed in the study area to acquire the data of the InSAR monitoring time period. The InSAR monitoring data and GPS monitoring data were used to analyze the Beijing–Guangzhou high-speed railway, the Anyang–Xinxiang line and the South-to-North Water Transfer Project. The project and the ground subsidence along the Wari Railway are analyzed through the single-point comparison with GPS and leveling data. As indicated by the results, the InSAR monitoring results are highly consistent with the GPS and leveling data in the subsidence trend, whereas some differences exist in the values. As revealed from the calculated results, the root mean square error (RMSE) between the InSAR monitoring results and the GPS monitoring results was ± 10.96 mm/a, and the RMSE between the InSAR measurement result and the level measurement was ± 11.23 mm/a. The research results can scientifically underpin interprovincial joint prevention and control of land subsidence in the northern Henan Plain, as well as basically support sustainable economic and social development. [ABSTRACT FROM AUTHOR]

Photodynamic therapy (PDT) uses a combination of photosensitizers with visible light to generate reactive species and selectively kill tumor or unwanted tissue. Znln2S4 nanoparticles are widely implemented in photovoltaic device materials and photolysis water catalysts owing to their unique photoelectric properties. Whether Znln2S4 itself can be used as an effective dye in PDT is still unknown. To determine the effects and potential mechanism of Znln2S4PDT on HepG2 cell apoptosis, electron microscopic analysis was performed to monitor the apoptotic morphology of HepG2 cells upon exposure to Znln2S4-PDT. Flow cytometry was performed to measure the apoptosis rate and intracellular ROS production. Western blot and ELISA were performed to reveal the expression changes in Bax, caspase-3 and caspase-9. Data from this work suggested that cells exhibited the typical apoptotic morphology in response to Znln2S4-PDT, with high apoptotic rate. The intracellular ROS production after Znln2S4-PDT occurred in a dose-dependent manner. Moreover, Znln2S4-PDT augmented the expression levels of pro-apoptosis factors, especially, Bax, caspase-3 and caspase-9. Taken together, our novel findings, Znln2S4-PDT elicited HepG2 cell apoptosis, suggesting Znln2S4 as a promising photosensitizer candidate for cancer therapy. [ABSTRACT FROM AUTHOR]

A 35-day experiment was carried out to investigate the effect of light intensity on growth of Brachymystax lenok under different light intensities: 10, 70, 240 and 1000 lx. Fish(5.5 ± 0.24 g)used in the experiment were fed to satiation twice a day (08:00 hours, 14:00 hours).The photoperiod was 12L:12D (08:00-20:00 hours). The specific growth rate( SGR) of B. lenok under lower intensities(10 lx,70 lx)was significantly higher than the other groups( P < 0.05).No significant difference in feed intake was observed at different light intensities, but feed efficiency ( FE) in wet weight at lower intensities (1070 lx) was higher than that at higher intensities(240,1000 lx) ( P < 0.05).The final survival rate of juveniles varied from 86.33% to 93.66%,and there was no significant difference between experimental groups. The tested fish under higher light intensities (240 and 1000 lx) spent much more energy in respiration and excretion while depositing less energy for growth than those fish under lower light intensities. It is concluded that light intensity significantly affected growth and optimal light intensity for B. lenok juveniles was about 10-70 lx. [ABSTRACT FROM AUTHOR]

At present, in the field of video-based human action recognition, deep neural networks are mainly divided into two branches: the 2D convolutional neural network (CNN) and 3D CNN. However, 2D CNN's temporal and spatial feature extraction processes are independent of each other, which means that it is easy to ignore the internal connection, affecting the performance of recognition. Although 3D CNN can extract the temporal and spatial features of the video sequence at the same time, the parameters of the 3D model increase exponentially, resulting in the model being difficult to train and transfer. To solve this problem, this article is based on 3D CNN combined with a residual structure and attention mechanism to improve the existing 3D CNN model, and we propose two types of human action recognition models (the Residual 3D Network (R3D) and Attention Residual 3D Network (AR3D)). Firstly, in this article, we propose a shallow feature extraction module and improve the ordinary 3D residual structure, which reduces the parameters and strengthens the extraction of temporal features. Secondly, we explore the application of the attention mechanism in human action recognition and design a 3D spatio-temporal attention mechanism module to strengthen the extraction of global features of human action. Finally, in order to make full use of the residual structure and attention mechanism, an Attention Residual 3D Network (AR3D) is proposed, and its two fusion strategies and corresponding model structure (AR3D_V1, AR3D_V2) are introduced in detail. Experiments show that the fused structure shows different degrees of performance improvement compared to a single structure. [ABSTRACT FROM AUTHOR]

Fluid–structure interaction (FSI) is a frequent and unstable inherent phenomenon in water conveyance systems. Especially in a system with a surge chamber, valve closing and the subsequent water level oscillation in the surge chamber are the excitation source of the hydraulic transient process. Water-hammer-induced FSI has not been considered in preceding research, and the results without FSI justify further investigations. In this study, an FSI eight-equation model is presented to capture its influence. Both the elbow pipe and surge chamber are treated as boundary conditions, and solved using the finite volume method (FVM). After verifying the feasibility of using FVM to solve FSI, friction, Poisson, and junction couplings are discussed in detail to separately reveal the influence of a surge chamber, tow elbows, and a valve on FSI. Results indicated that the major mechanisms of coupling are junction coupling and Poisson coupling. The former occurs in the surge chamber and elbows. Meanwhile, a stronger pressure pulsation is produced at the valve, resulting in a more complex FSI response in the water conveyance system. Poisson coupling and junction coupling are the main factors contributing to a large amount of local transilience emerging on the dynamic pressure curves. Moreover, frictional coupling leads to the lower amplitudes of transilience. These results indicate that the transilience is induced by the water hammer–structure interaction and plays important roles in the orifice optimization in the surge chamber. [ABSTRACT FROM AUTHOR]

For a water diversion hydropower system with a flat ceiling tail tunnel with high elevation, during transient states with relatively low tail water levels, free-surface-pressurized flow inevitably appears and its transient characteristics have obvious effects on the system's operating stability. Using Newton–Raphson linearization in the characteristic implicit format for modeling of the free-surface-pressurized flow in the tail tunnel, the mathematical models for necessary boundary conditions were derived and linear algebraic equations with a band coefficient matrix were grouped for further transient simulation. Then, a unified mathematical model was established for hydraulic transient analysis of the hydropower system with free-surface-pressurized flow. Combined with experimental research and numerical simulation, the wave speed for the free-surface-pressurized flow was experimentally analyzed for further correctness in the unified model, and by comparative analysis the hydraulic characteristics of the free-surface-pressurized flow in the flat ceiling tail tunnel were investigated. It was found that the derived mathematical model can basically represent water behaviors in the water-surface-pressurized flow, the wave speed for the mixed water-surface-pressurized flow can be set to approximately 50m/s, and with this correctness the numerical results are in good agreement with the experimental results. Therefore, the obtained mathematical model combined with an experimental wave speed or a reference wave speed of 50 m/s for the free-surface-pressurized flow is preferable during the design stage of the hydropower system. [ABSTRACT FROM AUTHOR]

The article provides information on the endangered fish Brachymystax lenok, popularly known as Lenok. It notes that lenok inhabits in Amur River, which prefers swift currents and clear water over large gravel substrates, and consumes larval and adult insects as well as small fishes and frogs. It mentions that overfishing, water pollution, and environmental changes threatens lenok . It also suggests to implement a recovery plan to conserve and protect Brachymystax lenok.