Search

In this work, we report the capacitance recovery behavior in the blue quantum dot light-emitting diode (QLED) by capacitance–voltage (C–V) characterizations. A comprehensive study of the C–V, dC/dV–V, and current density–voltage characteristics of pristine and shelf-aged devices suggests that capacitance recovery is associated with space charge-induced charge accumulation. At lower temperatures, the capacitance recovery in the shelf-aged device is efficiently suppressed due to the difficulty in building up the space charge, which supports our argument. Moreover, the capacitance recovery behavior of QLED only happens at low frequencies (a few hundred hertz), which is related to the time constant for charge accumulation at the selected voltage. Our work shows the effect of space charge on device capacitance and enriches the comprehension of carrier processes in QLED under AC measurement. [ABSTRACT FROM AUTHOR]

The influence of chimeric antigen receptor T (CAR-T) cell therapy on platelet function in relapsed/refractory (R/R) multiple myeloma (MM) has not been thoroughly investigated. Our cohort comprised fifty MM patients treated with CAR-T cells. The mean platelet closure time (PCT) induced by collagen/adenosine diphosphate (CADP) in peripheral blood was significantly prolonged before lymphodepletion (195.24 ± 11.740 s) and notably reduced post-CAR-T cell therapy (128.02 ± 5.60 s), with a statistically significant improvement (67.22, 95% CI 46.91–87.53, P < 0.001). This post-treatment PCT was not significantly different from that of healthy controls (10.64, 95% CI 1.11–22.40, P > 0.05). Furthermore, a pronounced enhancement in PCT was observed in patients with a response greater than partial remission (PR) following CAR-T cell infusion compared to pre-treatment values (P < 0.001). An extended PCT was also associated with a less favorable remission status. In patients with cytokine release syndrome (CRS) grades 0–2, those with a PCT over 240.5 s exhibited a shorter progression-free survival (PFS), with median PFS times of 10.2 months for the PCT > 240.5 s group versus 22.0 months for the PCT ≤ 240.5 s group. Multivariate analysis revealed that a PCT value exceeding 240.5 s is an independent prognostic factor for overall survival (OS) in R/R MM patients after CAR-T cell therapy. The study demonstrates that CAR-T cell therapy enhances platelet function in R/R MM patients, and PCT emerges as a potential prognostic biomarker for the efficacy of CAR-T cell therapy. [ABSTRACT FROM AUTHOR]

Background: Trailing parents, a distinct group emerging from China's rapid social change and urbanization, are experiencing migration in old age, posing challenges for their social adaptation. Existing research has mainly focused on the hardships faced by this group, but few studies have focused on how they cope with change and achieve some degree of successful social adaptation. This study aimed to understand the coping and social adaptation process of trailing parents in China. Methods: This study used a qualitative research approach. A total of 24 trailing parents were invited to participate in a semi-structured interview and share their experiences and efforts to cope with the many challenges. Kumpfer's resilience framework was used as the theoretical framework for the study design, data collection, and data analysis. Results: This study identified several intra-family and community stressors that trailing parents may face when moving to a new environment and uncovered five key resilience characteristics that may be triggered or fostered in the presence of these stressors, including physical fitness, psychological stability, open-mindedness, learning ability, and nurturing hobbies. Individuals with resilience traits have been observed to engage in positive cognitive processing and transform the new environment. Consistent with Kumpfer's resilience framework, this study revealed the dynamics of the stressors faced by trailing parents in the new environments, the role of resilience characteristics, and the critical influence of social support in shaping the interplay between the individual and the environment that enabled them to adapt positively. Conclusions: This study highlights the importance of fostering resilience traits and leveraging positive coping mechanisms to facilitate a smoother adaptation process for trailing parents. Meanwhile, there is an urgent need to focus on creating opportunities that strengthen their social support networks. [ABSTRACT FROM AUTHOR]

Few studies have reported the associations of granulocyte colony-stimulating factor (G-CSF) with cytokine release syndrome (CRS), neurotoxic events (NEs) and efficacy after chimeric antigen receptor (CAR) T-cell therapy for relapsed or refractory (R/R) B-cell acute lymphoblastic leukemia (B-ALL). We present a retrospective study of 67 patients with R/R B-ALL who received anti-CD19 CAR T-cell therapy, 41 (61.2%) patients received G-CSF (G-CSF group), while 26 (38.8%) did not (non-G-CSF group). Patients had similar duration of grade 3–4 neutropenia between the two groups. The incidences of CRS and NEs were higher in G-CSF group, while no differences in severity were found. Further stratified analysis showed that the incidence and severity of CRS were not associated with G-CSF administration in patients with low bone marrow (BM) tumor burden. None of the patients with low BM tumor burden developed NEs. However, there was a significant increase in the incidence of CRS after G-CSF administration in patients with high BM tumor burden. The duration of CRS in patients who used G-CSF was longer. There were no significant differences in response rates at 1 and 3 months after CAR T-cell infusion, as well as overall survival (OS) between the two groups. In conclusion, our results showed that G-CSF administration was not associated with the incidence or severity of CRS in patients with low BM tumor burden, but the incidence of CRS was higher after G-CSF administration in patients with high BM tumor burden. The duration of CRS was prolonged in G-CSF group. G-CSF administration was not associated with the efficacy of CAR T-cell therapy. [ABSTRACT FROM AUTHOR]

Despite the high therapeutic response achieved with B-cell maturation antigen (BCMA)-specific chimeric antigen receptor (CAR) T-cell therapy in relapsed and refractory multiple myeloma (R/R MM), primary resistance and relapse exist with single-target immunotherapy. Here, we design bispecific BC19 CAR T cells targeting BCMA/CD19 and evaluate antimyeloma activity in vitro and in vivo. Preclinical results indicate that BC19 CAR specifically recognize target antigens, and BC19 CAR T cells mediate selective killing of BCMA or CD19-positive cancer cells. BC19 CAR T cells also exhibit potent antigen-specific anti-tumor activity in xenograft mouse models. We conduct an open-label, single-arm, phase I/II study of BC19 CAR T cells in 50 patients with R/R MM (ChiCTR2000033567). The primary endpoint was safety. BC19 CAR T cells are well tolerated with grade 3 or higher cytokine release syndrome in 8% of patients and grade 1 neurotoxic events in 4% of patients, which meet the pre-specified primary endpoint. Secondary endpoints include overall response rate (92%), median progression-free survival (19.7 months), median overall survival (19.7 months) and median duration of response (not reached). Our study demonstrates that bispecific BC19 CAR T cells are feasible, safe and effective in treating patients with R/R MM. CAR-T cell therapies targeting BCMA have shown promising responses in patients with multiple myeloma (MM), however primary resistance and relapse are frequently observed. Here the authors report the results of a phase I//II study of bispecific CAR T-cells targeting BCMA and CD19 in relapsed/refractory MM. [ABSTRACT FROM AUTHOR]

Quantum dot light‐emitting diodes (QLEDs) is one of the most important components in the display field, and different structures have a certain impact on the final performance of the device. Previous QLEDs mainly use ZnO nanocrystals as the electron transport layer (ETL), but the chemical activity of ZnO nanocrystals under electric fields and moisture is not stable enough. To solve this problem, this paper studies the effects of TiO2 films with different thicknesses on the luminescence, current density and external quantum efficiency of QLED devices by using magnetron sputtered TiO2 as a new ETL. The experimental results show that the 50nm TiO2 film achieves the highest external quantum efficiency while maintaining favorable current density and brightness. [ABSTRACT FROM AUTHOR]

This paper introduces a flexible and uniformly‐dispersed quantum dot (QD) color filter (QDCF) fabricated for micro‐LED by photolithography. We studied the condition of PET films and concentration of QDs, the optimized QDCF exhibited high quantum yield (QY) up to over 70%, and a high optical density (OD) over 1.2. The QY increased and then decreased with the increase of the concentration. [ABSTRACT FROM AUTHOR]

Smart materials that integrate multi-stimuli response, full reversibility, and dual-visual read-out channel are highly desired for anti-counterfeiting and information encryption applications. Herein, we developed a multiresponsive perchlorate terpyridyl Pt(II) nano complex which could undergo fully reversible conversion between three forms stimulated by water or formaldehyde molecule due to the extent of Pt–Pt interaction. Meanwhile, a dual-visual channel, i.e., the colorimetric channel changed from yellow to orange or red and the corresponding luminescent channel from orange to orange-red or red, has also been found. The weak and equivalent strength of ion-dipole interaction and hydrogen bond that generated between formaldehyde/water and Pt(II) salt result in the easy-control reversibility between the three forms. Furthermore, by introducing different polymer matrices, 1Cl·ClO4@PMMA (1Cl·ClO4: [Pt(tpy)Cl]·ClO4, tpy: 2,2′:6′,2″-terpyridine), PMMA: poly(methyl methacrylate)) and 1Cl·ClO4@PVA (PVA: polyvinyl alcohol) are successfully constructed, which exhibit different reversible behaviors since the PMMA and PVA matrix exert different influences on the strength of hydrogen-bond. Those smart Pt(II) salt nanostructures present great potential for high-security-level anticounterfeiting application. [ABSTRACT FROM AUTHOR]

In this report, ZnSeTe‐based blue bottom‐emitting quantum dot light‐emitting diodes (QLEDs) with optical microcavity design were demonstrated. The microcavity is formed by the top reflective Ag electrode and the bottom semi‐transparent multilayer electrode, ITO/Ag/ITO. The conventional normal QLED device structure is sandwiched between microcavity. The results show the full width at half maximum (FWHM) of the device emission spectrum is reduced to 50% compared to the device without microcavity, and the tail at longer emission wavelengths is notably suppressed. [ABSTRACT FROM AUTHOR]

Quantum dot light‐emitting diodes (QLEDs) have recently demonstrated great potential for next‐generation displays. By optimizing the device structure and film thicknesses, we achieved top‐emitting QLED devices with good performance metrics, including high brightness, efficiency, and low turn‐on voltage. Furthermore, we successfully fabricated single‐color active‐matrix quantum dot light emitting diode (AMQLED) micro display devices by integrating QLED with a Complementary Metal–Oxide– Semiconductor (CMOS) backplane. These devices exhibit high resolution, brightness, and image quality, underscoring the significant commercial value of QLED micro display devices in head‐mounted augmented reality/virtual reality (AR/VR) systems. [ABSTRACT FROM AUTHOR]

Class I flextensional transducers cannot form broadband characteristics because of the deep valley between their first- and second-order response curves. This valley arises from the sound pressure cancellation produced by the vibration in different areas of the shell. This paper examines the cause of the deep valley by analyzing the three-dimensional equivalent radiated sound field of the transducer. By solving the three-dimensional vibration equation of the shell of revolution and reducing its dimensionality, it can be concluded that its vibration state is related to the positive and negative curvatures in both main directions. Therefore, a variable-curvature shell class I flextensional transducer is proposed, and the second-order vibration of the transducer is changed by the variable-curvature structure composed of positive and negative Gaussian curvature surfaces. The proposed transducer avoids sound pressure cancellation and achieves broadband characteristics. After optimization, a transducer prototype is fabricated, and a pool test is conducted. The test results show that the transducer couples the first three vibration modes, attaining broadband characteristics with an in-band fluctuation of less than 8 dB and a bandwidth of more than 5.4 kHz in the axial and circumferential directions. [ABSTRACT FROM AUTHOR]

We report a 0.39‐in. quantum dot light‐emitting diode (QLED) microdisplay with full high‐definition (FHD, 1920 × 1080) resolution by integrating a red top‐emitting QLED on a complementary metal–oxide–semiconductor (CMOS) backplane. By optimizing the microcavity structure and constructing a suitable energy‐level structure for the QLED devices, the performance of the large‐area (4.9 × 8.7 mm2) top‐emitting device with normal structure reached 13,936 cd/m2 of brightness at 5‐V bias with 13.3% external quantum efficiency (EQE). Notably, the optimal device showed a low turn‐on voltage of 1.7 V, which matched well the voltage output of the CMOS backplane. Our work demonstrates the great promise of QLED microdisplays for applications in head‐mounted augmented reality/virtual reality (AR/VR). [ABSTRACT FROM AUTHOR]

Background: Ginkgo biloba extract (GBE) is evidenced to be effective in the prevention and alleviation of metabolic disorders, including obesity, diabetes and fatty liver disease. However, the role of GBE in alleviating fatty liver hemorrhagic syndrome (FLHS) in laying hens and the underlying mechanisms remain to be elucidated. Here, we investigated the effects of GBE on relieving FLHS with an emphasis on the modulatory role of GBE in chicken gut microbiota. Results: The results showed that GBE treatment ameliorated biochemical blood indicators in high-fat diet (HFD)-induced FLHS laying hen model by decreasing the levels of TG, TC, ALT and ALP. The lipid accumulation and pathological score of liver were also relieved after GBE treatment. Moreover, GBE treatment enhanced the antioxidant activity of liver and serum by increasing GSH, SOD, T-AOC, GSH-PX and reducing MDA, and downregulated the expression of genes related to lipid synthesis (FAS, LXRα, GPAT1, PPARγ and ChREBP1) and inflammatory cytokines (TNF-α, IL-6, TLR4 and NF-κB) in the liver. Microbial profiling analysis revealed that GBE treatment reshaped the HFD-perturbed gut microbiota, particularly elevated the abundance of Megasphaera in the cecum. Meanwhile, targeted metabolomic analysis of SCFAs revealed that GBE treatment significantly promoted the production of total SCFAs, acetate and propionate, which were positively correlated with the GBE-enriched gut microbiota. Finally, we confirmed that the GBE-altered gut microbiota was sufficient to alleviate FLHS by fecal microbiota transplantation (FMT). Conclusions: We provided evidence that GBE alleviated FLHS in HFD-induced laying hens through reshaping the composition of gut microbiota. Our findings shed light on mechanism underlying the anti-FLHS efficacy of GBE and lay foundations for future use of GBE as additive to prevent and control FLHS in laying hen industry. [ABSTRACT FROM AUTHOR]

Despite surpassing lung cancer as the most frequently diagnosed cancer, female breast cancer (BC) still lacks rapid detection methods for screening that can be implemented on a large scale in practical clinical settings. However, urine is a readily available biofluid obtained non-invasively and contains numerous volatile organic metabolites (VOMs) that offer valuable metabolic information concerning the onset and progression of diseases. In this work, a rapid method for analysis of VOMs in urine by using high-pressure photon ionization time-of-flight mass spectrometry (HPPI-TOFMS) coupled with dynamic purge injection. A simple pretreatment process of urine samples by adding acid and salt was employed for efficient VOM sampling, and the numbers of metabolites increased and the detection sensitivity was improved after the acid (HCl) and salt (NaCl) addition. The established mass spectrometry detection method was applied to analyze a set of training samples collected from a local hospital, including 24 breast cancer patients and 27 healthy controls. Statistical analysis techniques such as principal component analysis, partial least squares discriminant analysis, and the Mann–Whitney U test were used, and nine VOMs were identified as differential metabolites. Finally, acrolein, 2-pentanone, and methyl allyl sulfide were selected to build a metabolite combination model for distinguishing breast cancer patients from the healthy group, and the achieved sensitivity and specificity were 92.6% and 91.7%, respectively, according to the receiver operating characteristic curve analysis. The results demonstrate that this technology has potential to become a rapid screening tool for breast cancer, with significant room for further development. [ABSTRACT FROM AUTHOR]

Phytoremediation is considered an effective method for indoor air pollution control. The removal rate and mechanism of benzene in air by two plants, Tradescantia zebrina Bosse and Epipremnum aureum (Linden ex André) G. S. Bunting, were investigated through fumigation experiments under the condition of plant hydroponics culturing. Results showed that the plant removal rates increased with increase in benzene concentration in air. When the benzene concentration in air was set at 432.25–1314.75 mg·m−3, the removal rates of T. zebrina and E. aureum ranged from 23.05 ± 3.07 to 57.42 ± 8.28 mg·kg–1·h–1 FW and from 18.82 ± 3.73 to 101.58 ± 21.20 mg·kg–1·h–1 FW, respectively. The removal capacity was positively related to the transpiration rate of plants, indicating that gas exchange rate could be a key factor for the evaluation of removal capacity. There existed fast reversible transport of benzene on air-shoot interface and root-solution interface. After shoot exposure to benzene for 1 h, downward transport was the dominant mechanism in the removal of benzene in air by T. zebrina, while in vivo fixation was the dominant mechanism at exposure time of 3 and 8 h. Within 1–8 h of shoot exposure time, in vivo fixation capacity was always the key factor affecting the removal rate of benzene in the air by E. aureum. Contribution ratio of in vivo fixation in the total benzene removal rate increased from 6.29 to 92.29% for T. zebrina and from 73.22 to 98.42% for E. aureum in the experimental conditions. Reactive oxygen species (ROS) burst induced by benzene exposure was responsible for the contribution ratio change of different mechanisms in the total removal rate, which also was verified by the change of activities of antioxidant enzymes (CAT, POD, and SOD). Transpiration rate and antioxidant enzyme activity could be considered parameters to evaluate the plant removal ability to benzene and to screen plants for establishment of plant-microbe combination technology. [ABSTRACT FROM AUTHOR]

Type IV flextensional transducers do not have broadband characteristics due to the deep valley between their first- and second-order response curves arising from the sound pressure cancellation produced by the vibration in different areas of the shell. In this paper, the cause of the deep valley is examined by analyzing the equivalent radiated sound field of the transducer. Simplifying the three-dimensional vibration equation to a two-dimensional equation shows that the vibration state of the shell is related to the positive and negative curvature. Therefore, a variable-shell flextensional transducer with a negative curvature is proposed, which changes the second-order vibration of the transducer by introducing a negative curvature structure. The transducer avoids acoustic pressure cancellation, achieves broadband characteristics, and has continuous high efficiency in the frequency band. After optimization, a prototype of the transducer is fabricated and a pool test is completed. The test results show that the transducer realizes the coupling of the first three vibration mode, forming a broad band with an in-band fluctuation of less than 8 dB at 1200–5600 Hz, and the efficiencies of the first to third resonance peaks are 30.2 % , 16.6 % , and 9.4 % , respectively. [ABSTRACT FROM AUTHOR]

From the perspective of network embedding, this paper deeply analyzes the relationship between corporate absorptive capacity, environmental turbulence, and corporate innovation performance. Based on network embedding theory, knowledge management theory, and research data on advanced manufacturing enterprises in the middle reaches of the Yangtze River in China, this paper uses structural equation modeling for empirical analysis. (1) Environmental turbulence affects firms' innovation performance. When the external environment is highly turbulent, consumer demand can force companies to embed in external network organizations to obtain more heterogeneous resources, reduce the innovation cycle, and improve corporate innovation performance. (2) Network embedding can improve the enterprises' innovation performance through knowledge and value chains. (3) Enterprises' absorptive capacity plays an important role in improving innovation performance. Research shows that an enterprise with a stronger absorptive capacity is more able to improve its innovation performance. [ABSTRACT FROM AUTHOR]

Inkjet printing as an effective patterning deposition technology is very suitable for the fabrication of quantum dot light‐emitting diodes in next‐generation displays. However, there are still many challenges in achieving high efficiency and stability of the printed device. Herein, we reported the inkjet‐printed quantum dot light‐emitting diodes with an external quantum efficiency of over 20% and half lifetime at 1000 cd/m2 of 27,000 h for the first time. Such excellent performance is owing to the successfully optimal thickness (seven monolayers) of the extra ZnS shell, which improves the balance of the carries injection to suppress the nonradiative process for inkjet‐printed devices. Overall, this performance from inkjet‐printed quantum dot light‐emitting diodes accelerates the printed device to meet the requirements of practical display and lighting applications. [ABSTRACT FROM AUTHOR]

Grain loss in the harvesting process of combine harvesters not only causes economic losses to farmers but also affects the soil environment because of the lost grain covering the soil, influencing crop growth in the next season. Grain sieve loss-monitoring sensors represent an important accessory in combine harvesters, as they can not only provide current grain loss levels for the operator to adopt a rational action in time but also serve as an important performance signal for the control system. To reflect the rice grain sieve loss level of combine harvesters in real time, an indirect grain sieve loss-monitoring system is proposed in this paper. First, the grain collision rise time was obtained by the finite element method (FEM), and the parameters of the grain loss sensor signal processing circuit were determined accordingly to upgrade the monitoring accuracy. Then, grain loss distribution behind the cleaning shoe was analyzed in detail under different working parameters. Grain loss distribution functions at the end of the sieve and a monitoring mathematical model with relevant variables were established based on the laboratory experiment results. Finally, calibration experiments were carried out to verify the measurement accuracy of the sensor on a cleaning test bench, with an obtained relative monitoring error ≤6.41 % under different working conditions. [ABSTRACT FROM AUTHOR]

Anti-CD30 CAR-T is a potent candidate therapy for relapsed/refractory (r/r) CD30+ lymphomas with therapy limitations, and the efficacy needed to be further improved. Herein a multi-center phase II clinical trial (NCT03196830) of anti-CD30 CAR-T treatment combined with PD-1 inhibitor in r/r CD30+ lymphoma was conducted. After a lymphocyte-depleting chemotherapy with fludarabine and cyclophosphamide, 4 patients in cohort 1 and 3 patients in cohort 2 received 106/kg and 107/kg CAR-T cells, respectively, and 5 patients in cohort 3 received 107/kg CAR-T cells combined with anti-PD-1 antibody. The safety and the efficacy of CAR-T cell therapy were analyzed. Cytokine release syndrome (CRS) was observed in 4 of 12 patients, and only 1 patient (patient 9) experienced grade 3 CRS and was treated with glucocorticoid and tocilizumab. No CAR-T-related encephalopathy syndrome was observed. Only two patients in cohorts 2 and 3 experienced obviously high plasma levels of IL-6 and ferritin after CD30 CAR-T cell infusion. The overall response rate (ORR) was 91.7% (11/12), with 6 patients achieving complete remission (CR) (50%). In cohorts 1 and 2, 6 patients got a response (85.7%), with 2 patients achieving CR (28.6%). In cohort 3, 100% ORR and 80% CR were obtained in 5 patients without ≥3 grade CRS. With a median follow-up of 21.5 months (range: 3-50 months), the progression-free survival and the overall survival rates were 45 and 70%, respectively. Of the 11 patients who got a response after CAR-T therapy, 7 patients (63.6%) maintained their response until the end of follow-up. Three patients died last because of disease progression. Taken together, the combination of anti-PD-1 antibody showed an enhancement effect on CD30 CAR-T therapy in r/r CD30+ lymphoma patients with minimal toxicities. [ABSTRACT FROM AUTHOR]

This work demonstrated color-conversion layers of red and green quantum dots color filter for full-color display arrays. Ligands exchange using (3-glycidyloxypropyl) trimethoxysilane with epoxy functional groups to treat QDs in the liquid phase was performed for photolithography use. The combination of ligands of QDs with photo-initiator played a protective role on QDs. Moreover, the pixel size of green QDCF can be reduced to 50 μm, and a high optical density (OD) of 1.2 is realized. [ABSTRACT FROM AUTHOR]

As a class of randomized learner model, stochastic configuration networks (SCNs) have been successfully applied in a few data analytics tasks. Given the industrial big data modeling tasks, however, the original SCNs potentially lead to excessive training time. To this end, this article extends SCNs to a hybrid parallel version, termed hybrid parallel SCNs (HPSCNs). In the hybrid parallel learning algorithm, two SCNs are synchronously constructed. The difference between the two of them is that one employs a point-incremental algorithm, and another one adopts a block-incremental algorithm. Moreover, a data parallel method is established based on a dynamic block strategy to accelerate the establishment of candidate node pool for each SCN. Additionally, this article proposes an adaptive hyperparameter adjustment method, which allows the hyperparameters in the supervisory mechanism to be automatically adjusted along with the learning process. Comparative experiments are first conducted through four large-scale benchmark datasets, followed by the fully discussion on the algorithm parameters. Finally, a practical industrial application case is made, where a grinding particle size soft sensor is developed based on HPSCN, showing the effectiveness of the proposed algorithm. [ABSTRACT FROM AUTHOR]

Response surface methodology (RSM) was used to optimize the oxidizing the omeprazole sulfide to (S)-omeprazole catalyzed by environmentally friendly catalyst soybean pod peroxidase (SPP) in cetyltrimethylammonium bromide (CTAB)/isooctane/n-butyl alcohol/water water-in-oil microemulsions. With the initial concentration of SPP of 3200 U ml−1, the conversion of the omeprazole sulfide, the (S)-omeprazole yield and ee were 93.75%, 91.56% and 96.08%, respectively, under the optimal conditions: Wo of 15.85, the concentration of H2O2 of 22.44 mM and reaction temperature of 49.68 °C, respectively. The proposed mechanism of asymmetric sulfoxidations catalyzed by SPP involves three concomitant mechanisms as follows: (1) a two-electron reduction of SPP-I, (2) a single-electron transfer to SPP-I and (3) nonenzymatic reactions. Based on the proposed mechanism which is reasonable and can express the oxidations, the reaction system includes five enzymatic and two nonenzymatic reactions. With 5.44% of the average relative error, a kinetic model based on the mechanisms fitting observed data very well was established, and the SPP-catalyzed reactions including both the two-electron reduction and the single-electron transfer mechanisms obey ping-pong mechanism with substrate and product inhibition, while nonenzymatic reactions follow a power law. This study has also demonstrated the feasibility of SPP as a substitute with low cost, excellent enantioselectivity and better thermal stability. [ABSTRACT FROM AUTHOR]

(Ti,W)C-based cement tool materials with c-BN particles as additive phase are fabricated by the hot press sintering. The effect of c-BN addition on the microstructure and mechanical properties of (Ti,W)C-based cement tool materials are investigated. With the addition of c-BN, the fracture mode of composite transform from intergranular to transgranular fracture. The main toughening mechanism is particle bridging, crack deflection and crack bifurcation, which improve the fracture toughness of cement tool material. The proper addition of c-BN can improve the mechanical properties of the composites. When the content of c-BN is 1.5 wt %, (Ti,W)C-based cement tool materials reaches the optimum comprehensive mechanical properties. The hardness, the flexural strength and the fracture toughness is 19.78 GPa, 987 MPa and 9.44 MPa m1/2, respectively. [ABSTRACT FROM AUTHOR]

Early response could be obtained in most patients with relapsed or refractory B cell lymphoblastic leukemia (R/R B-ALL) treated with chimeric antigen receptor T-cell (CAR-T) therapy, but relapse occurs in some patients. There is no consensus on treatment strategy post CAR-T cell therapy. In this retrospective study of humanized CD19-targeted CAR-T cell (hCART19s) therapy for R/R B-ALL, we analyzed the patients treated with allogeneic hematopoietic stem cell transplantation (allo-HSCT) or received a second hCART19s infusion, and summarized their efficacy and safety. We retrospectively studied 28 R/R B-ALL patients treated with hCART19s in the Affiliated Hospital of Xuzhou Medical University from 2016 to 2020. After the first hCART19s infusion, 10 patients received allo-HSCT (CART+HSCT group), 7 patients received a second hCART19s infusion (CART2 group), and 11 patients did not receive HSCT or a second hCART19s infusion (CART1 group). The safety, efficacy, and long-term survival were analyzed. Of the 28 patients who received hCART19s treatment, 1 patient could not be evaluated for efficacy, and 25 (92.6%) achieved complete remission (CR) with 20 (74.7%) achieving minimal residual disease (MRD) negativity. Seven (25%) patients experienced grade 3-4 CRS, and one died from grade 5 CRS. No patient experienced ≥3 grade ICANS. The incidence of second CR is higher in the CART+HSCT group compared to the CART2 group (100% vs. 42.9%, p = 0.015). The median follow-up time was 1,240 days (range: 709–1,770). Significantly longer overall survival (OS) and leukemia-free survival (LFS) were achieved in the CART+HSCT group (median OS and LFS: not reached, p = 0.006 and 0.001, respectively) compared to the CART2 group (median OS: 482; median LFS: 189) and the CART1 group (median OS: 236; median LFS: 35). In the CART+HSCT group, the incidence of acute graft- versus -host disease (aGVHD) was 30% (3/10), and transplantation-related mortality was 30% (3/10). No chronic GVHD occurred. Multivariate analysis results showed that blasts ≥ 20% in the bone marrow and MRD ≥ 65.6% are independent factors for inferior OS and LFS, respectively, while receiving allo-HSCT is an independent factor associated with both longer OS and LFS. In conclusion, early allo-HSCT after CAR-T therapy can achieve long-term efficacy, and the adverse events are controllable. [ABSTRACT FROM AUTHOR]

(S)-Omeprazole is a very effective anti-ulcer medicine that is difficult to be prepared using whole cells at elevated substrate concentrations. In the chloroform–water biphasic system, resting cells of the mutant QZ-3 of Rhodococcus rhodochrous (R. rhodochrous) ATCC 4276 were used to catalyze the bio-oxidation of omeprazole sulfide for preparation of (S)-omeprazole. Using response surface methodology (RSM), the reaction was optimized to work at a substrate concentration of 180 mM and a cell concentration of 100 g/L. The optimal yield of (S)-omeprazole obtained was 92.9% with enantiomeric excess (ee) (> 99%), and no sulfone by-product was detected under the optimal working conditions; reaction temperature 37 °C, pH 7.3 and reaction time, 43 h. A quadratic polynomial model was established, which predicts the experimental data with very high accuracy (R2 = 0.9990). The chloroform–water biphasic system may contribute to the significant improvement in substrate tolerance because almost all substrates are partitioned in the organic phase (water solubility of omeprazole sulfide is only about 0.5 mg/mL), resulting in little damage and inhibition to cells by substrates. The mutant QZ-3 of R. rhodochrous ATCC 4276 exhibited high enantioselectivity, activity and substrate and product tolerance. The aerated flask provides enough oxygen for a high concentration of cells. Accordingly, bio-oxidation is thus more promising for efficient preparation of chiral sulfoxides. [ABSTRACT FROM AUTHOR]

Introduction: Chimeric antigen receptor T (CAR-T) cells are effective in treating hematological malignancies. However, in patients receiving CAR-T therapy, data characterizing cardiac disorders are limited. Methods: 126 patients with hematologic malignancies receiving CAR-T cell therapy were analyzed to determine the impact of CAR-T therapy on occurrence of cardiac disorders, including heart failure, arrhythmias, myocardial infarction, which were defined by the Common Terminology Criteria for Adverse Events (CTCAE). Parameters related to cardiac disorders were detected including myocardial enzyme, NT-proBNP and ejection fraction (EF). Cardiovascular (CV) events included decompensated heart failure (HF), clinically significant arrhythmias and CV death. Results: The median age of patients was 56 years (6 to 72 years). 58% patients were male, 62% had multiple myeloma, 20% had lymphoma and 18% had ALL. 33 (26%) patients had cardiac disorders, most of which were grade 1-2. 13 patients (10%) were observed with cardiac disorders grade 3-5, which comprised 5(4%) patients with new-onset HF, 2 (2%) patients with new-onset arrhythmias, 4 (3%) patients with the acute coronary syndrome, 1(1%) patient with myocardial infarction and 1(1%) patient with left ventricular systolic dysfunction. There were 9 CV events (7%) including 6 decompensated heart failure, 1 clinically significant arrhythmias and 2 CV deaths. Among the 33 patients with cardiac disorders, the patients with cardiac disorders CTCAE grade 3-5 had higher grade CRS (grade ≥ 3) than those with cardiac disorders CTCAE grade ≤ 2 (P < 0.001). More patients with cardiac disorders CTCAE grade 3-5 were observed in the cohort who did not receive corticosteroids and/or tocilizumab therapy timely comparing with those who received corticosteroids and/or tocilizumab therapy timely (P =0.0004). Conclusions: Cardiac disorders CAR-T cell therapy were common and associated with occurrence of CRS. However, most cases were mild. For patients with CRS grade 3-5, timely administration of corticosteroids and/or tocilizumab can effectively prevent the occurrence and progression of cardiac disorders. [ABSTRACT FROM AUTHOR]

This article discusses the aging behavior of Quantum Dot Light-Emitting Diodes (QLEDs) that use sputtered TiO2 as the Electron Transport Layer (ETL). The authors explain that while there have been advancements in improving the efficiency and lifetime of QLEDs, controlling and predicting device characteristics during storage and operation remains challenging. To address this issue, the authors introduced a sputtered TiO2 film as an alternative ETL, which offers promise in resolving these challenges. The findings indicate that devices incorporating a sputtered TiO2 film as the ETL exhibit a controllable and predictable aging curve, with a lower acceleration factor compared to conventional QLEDs. [Extracted from the article]

Enantiopure esomeprazole is an important drug in the treatment of gastric ulcer. The asymmetric sulfoxidation of omeprazole thioether was catalyzed by immobilized cells of a mutant of Rhodococcus rhodocrous ATCC 4276 to synthesize esomeprazole. The bioreaction was carried out in a biphasic system (chloroform-water), at a high substrate concentration (200 mM), and optimized using response surface methodology (RSM). The optimal yield of esomeprazole obtained was 94.8% with e.e. (>99%) without the formation of the sulfone form as a byproduct, under the optimal conditions: the concentration of immobilized cells, 283.5 g/L, the incubation temperature, 37.05 °C, and pH of phosphate buffer, 7.35, respectively. A quadratic polynomial model was developed with R2 of 0.9998, which indicates that the model predicts the observed data with very high accuracy. The mutant exhibited a high enantioselective activity and substrate and product tolerance. The small size of immobilized cell beads (0.5–1 mm) creates a large reaction interface. The aerated flask provides enough oxygen for a high concentration of cells. The significant improvement of substrate tolerance may mainly be attributed to employing the chloroform-water biphasic system because organic substrates may be partitioned in the organic phase, eliminating potential damage and inhibition to cells. Based on the above, the asymmetric sulfoxidation catalyzed by immobilized bacterial cells is therefore more promising for efficient synthesis of chiral sulfoxides. [ABSTRACT FROM AUTHOR]

The emergence of optical Internet of Things (optical-IoT) for sixth-generation (6G) networks has been envisaged to relieve the bandwidth congestion in the conventional radio frequency (RF) channel, and to support the ever-increasing number of smart devices. Among the plethora of device innovations deemed essential for fortifying the development, herein we report on the visible-to-near-infrared color-conversion luminescent-dyes based on lead sulphide quantum dots (PbS QDs), so as to achieve an eye-safe high-speed optical link. The solution-processed PbS QDs exhibited strong absorption in the visible range, radiative recombination lifetime of 6.4 μs, as well as high photoluminescence quantum yield of up to 88%. Our proof-of-principle demonstration based on an orthogonal frequency-division multiplexing (OFDM) modulation scheme established an infrared data transmission of 0.27 Mbit/s, readily supporting an indoor optical-IoT system, and shed light on the possibility for PbS-integrated transceivers in supporting remote access control of multiple nodes. We further envisaged that our investigations could find applications in future development of solution-processable PbS-integrated luminescent fibers, concentrators, and waveguides for high-speed optical receivers. [ABSTRACT FROM AUTHOR]

Clinical trials have confirmed that chimeric antigen receptor (CAR) T cell therapies are revolutionizing approaches for treating several relapsed or refractory hematological tumors. Cytokine release syndrome (CRS) is an adverse event with high incidence during CAR-T treatment. A further understanding of the characteristics and related risk factors of CRS is important for effective management. A total of 142 patients with relapsed or refractory acute lymphocyte leukemia (ALL), lymphoma, or multiple myeloma (MM) received lymphodepletion chemotherapy followed by infusion of CAR-T cells. The characteristics of CRS at different time points after treatment were monitored and risk factors were analyzed. The incidence of CRS for ALL, lymphoma, and multiple myeloma were 82%, 90%, and 90% respectively. Fever was observed on a median of day 3 for ALL, day 1 for lymphoma, and day 8.5 for MM after CAR-T cell infusion, and the duration was different between grade 1–2 CRS and grade 3–5 CRS. Disease types, peak concentration of IL-6, and CRP were associated with CRS. For patients with ALL, numbers of lymphoblast in bone marrow before lymphodepletion, peak concentration of IL-6, and CRP were independent risk factors of CRS. Clinical stage of lymphoma patients and high tumor burden in marrow of MM patients were independent risk factors of CRS. In conclusion, the characteristics and risk factors of CRS in different B-cell hematological tumors are different and should be managed individually during CAR-T cell therapy. [ABSTRACT FROM AUTHOR]

The formaldehyde dehydrogenase (FADH) activity in plants is essential to the removal of airborne formaldehyde (FA) by plants. A rapid and efficient method was established to assess the FADH activity in plants by analyzing the efficiencies of the extracts of fresh and enzyme-inactivated leaves to degrade FA, with the enzyme-inactivated leaves prepared by freezing with liquid nitrogen. The efficiencies of airborne FA dissipated by different plants were evaluated through the FA fumigation experiments using four selected plants, with the results analyzed against the calculated leaf FADH activities. Fresh and enzyme-inactivated leaf extracts degraded FA to different extents. The degradative efficiencies of leaf extracts were positively related to the initial FA test levels at 6–18 mg l−1. The relative plant-leaf FADH activities formed the order of Chenopodium album L. > Atenia cordifolia > Plantain > Aloe, which was in line with the observed FA dissipating efficiencies of the plants exposed to 0.72 mg m−3 airborne FA for 24 h. Other dominant degrading mechanisms in plant leaves resulted in higher dissipating efficiencies of Plantain over that of Atenia cordifolia when exposed to 1.56 mg m−3 FA for 24 h. The established method could be applied to estimate the FADH activity in plants for assessment of the plant remediation efficiency of FA in air at lower concentrations. [ABSTRACT FROM AUTHOR]

Background: Splenic diffuse red pulp small B-cell lymphoma (SDRPSBCL) is rare and accounts for less than 1% of non-Hodgkin's lymphoma. As the first or accompanying symptoms of SDRPSBCL, gastrointestinal hemorrhage (GIH) is rather unusual. Patients and Methods: We reported on a patient with SDRPSBCL complicated with GIH. According to the enteroscopy, pathological sections of spleen and intestine, immunohistochemistry and other related laboratory examinations, the patient was diagnosed as SDRPSBCL (stage IVb) complicated with colon and rectal ulcers. The clinical manifestations were hematochezia, unformed stool, continuous anal pain and poor quality of life. Subsequently, the patient was treated by six cycles of CHOP (cyclophosphamide + doxorubicin + vincristine + hydroprednisone) regimens. The clinical features, diagnosis and treatment were analyzed retrospectively and the relevant literatures were reviewed. Results: After the first course of chemotherapy, the patient did not have any more bloody stool and the stool was shaped. After six cycles of chemotherapy, the patient's anus was no longer painful and he has been in complete remission according to the result of positron emission tomography CT. Conclusion: Through analysis of this case, we could elucidate that after the primary disease was alleviated, the bleeding degree of digestive tract was relieved, which provided the basis for the clinical treatment of this rare disease. [ABSTRACT FROM AUTHOR]

Nowadays, there is an increasing demand of healthier plant calcium supplements. Moringa oleifera leaves (MOL) are rich in calcium and thus are promising candidates for developing efficient calcium supplements. Here, using fermentation‐based approaches, we developed a Moringa oleifera leaf ferment (MOLF), which contents higher levels of calcium. The therapeutic potential of the MOLF was also examined both in vitro and in vivo. Nine lactic acid bacteria and four yeasts were tested for better fermentation of MOL. Calcium‐deficient rats were used for evaluating the therapeutic effects of MOLF. The results of liquid fermentation showed that the mixture of Lactobacillus reuteri, Lactobacillus acidophilus, and Candida utilis elevated the content of MOL calcium most strikingly, with the content of calcium increased nearly 2.4‐fold (from 2.08% to 4.90%). The resulting MOLF was then subjected to cell experiments and animal experiments. The results showed that calcium absorption in Caco‐2 cells in MOLF group was higher than that in CaCl2 group significantly. Interestingly, in calcium‐deficient rats, MOLF treatment significantly increased the thickness of cortical bone, rat body weight, wet weight of the femur, and the femur bone density, whereas it decreased osteoclast numbers. These results indicate that microbial fermentation increased calcium bioavailability of MOL, promote the growth and development of calcium‐deficient rats, bone calcium deposition, and bone growth; enhance bone strength; reduce bone resorption; and prevent calcium deficiency. [ABSTRACT FROM AUTHOR]

With the new round of scientific and technological revolution and industrial change accelerating, "electrification, intelligence, network and sharing" has become a new trend of the current automotive industry reform. Accelerating the cultivation and development of new energy vehicles has not only become an urgent task to effectively alleviate the pressure of energy and environment in China and promote the sustainable development of the automobile industry, but also a strategic measure to accelerate the transformation and upgrading of the automobile industry in China. In view of the low survival rate of high-tech innovating enterprises and high input and high risk of high-tech enterprises, it is of great significance to assess and evaluate the operating efficiency of the high-tech innovating enterprises. This study used the entropy weight method to establish a DEA -based business performance evaluation index model to evaluate and analyze the business performance of the listed new energy vehicles enterprises in China in 2018. The result shows that most of the new energy vehicles enterprises are in the state of increasing returns to scale, conforming to the characteristic of high growth of high-tech enterprises; however, the overall operational efficiency of these enterprises is very low and some of them face the problem of obvious scientific research input redundancy; therefore, the improper input-output framework is the main reason lead to the low scale efficiency for the enterprises and provide corresponding policy proposals for these problems. [ABSTRACT FROM AUTHOR]

This paper is devoted to the Lp (p > 1) solutions of one-dimensional backward stochastic differential equations (BSDEs for short) with general time intervals and generators satisfying some non-uniform conditions in t and ω. An existence and uniqueness result, a comparison theorem and an existence result for the minimal solutions are respectively obtained, which considerably improve some known works. Some classical techniques used to deal with the existence and uniqueness of Lp (p > 1) solutions of BSDEs with Lipschitz or linear-growth generators are also developed in this paper. [ABSTRACT FROM AUTHOR]

Using blue Micro‐LED back light and red‐green quantum dot (QD) color converter (QDCC) is a full color display technology with great potential to achieve high resolution, color purity and luminous efficiency. In this work, we try a new method of ligands exchange, using 3‐Mercaptopropionic acid (MPA) ligands with two functional groups to treat QDs in the liquid phase. The modified QDs can be sufficiently dispersed in the negative‐tone molecular resists. In our current process, the pixel size can be reduced to 5 fim and the large‐area ultra‐high‐resolution QDCC with great uniformity is realized. [ABSTRACT FROM AUTHOR]

The problem of oil-water separation regarding oil-containing brine has been of much concern when using the oil pad water dissolution method to construct salt cavern reservoirs. In this paper, oil-water separation materials with micro-nano hierarchical structure were prepared on different metal substrates using chemical etching and electrophoretic deposition. And hydrophobic materials with a single micro/nano structure were also prepared; then, the surfaces were hydrophobized by various low surface energy modifiers. Thereafter, we analyzed and compared the surface morphology, chemical composition, and wettability of all the materials and found that brine contact angles on hierarchical structure surfaces were above 160° while the diesel was completely diffused. Furthermore, preparation parameters affecting the surface morphology and wettability of micro-nano composite structures were explored. Meanwhile, it was found that the surface of prepared composite structure could still maintain super-hydrophobic/lipophilic properties after exposure in air for 6 months, sliding 60 cm on sandpaper, or immersion in diesel/brine for 48 h. Moreover, the composite structure surface displayed improved corrosion resistance with corrected self-corrosion potential and lower corrosion current density. It was equally observed that the studied materials could be better adapted to the actual context of salt cavern reservoir construction and thus have great application prospects. [ABSTRACT FROM AUTHOR]

Bone marrow macrophages have been demonstrated to serve a critical role in promoting maintenance and retention of hematopoietic stem cells (HSCs). Our previous study indicated increased macrophages infiltration in bone marrow after HSC transplantation (HSCT). However, it is not well understood whether macrophages affect hematopoietic reconstitution after HSCT. The present study aimed to investigate the role of macrophages in hematopoietic reconstitution after HSCT. BALB/c mice were divided into HSCT, HSCT+Clodronate Liposomes, HSCT+PBS Liposomes, HSCT+RS102895 and HSCT+Vehicle groups and sacrificed on day 7, 14, 21, 28 and 35 after HSCT. Analysis was performed to detect the changes of bone marrow pathology by H&E staining and the number of macrophages was assessed by immunohistochemical staining and western blot analysis. The number of c-kit+sca-1+ and c-kit+ was measured by flow cytometry. Mice with a depletion of bone marrow macrophages displayed significantly reduced overall survival, delayed hematopoietic recovery, a reduced number of hematopoietic stem/progenitor cells and bone marrow cells as well as exaggerated bone marrow injury. However, compared with the HSCT+Vehicle group, mice with an increased number of bone marrow macrophages exhibited no difference of overall survival, had accelerated hematopoietic reconstitution, a higher number of hematopoietic stem/progenitor cells and bone marrow cells and ameliorated bone marrow injury. In conclusion, the present study indicated that bone marrow macrophages serve a protective role in bone marrow injury and may promote hematopoiesis in mice after HSCT, suggesting manipulation of macrophages may be a novel strategy for improving the efficacy of HSCT. [ABSTRACT FROM AUTHOR]