Search

A fire detector is the most important component in a fire alarm system. Herein, we present the feasibility of a highly sensitive and rapid response gas sensor based on metal oxides as a high performance fire detector. The glancing angle deposition (GLAD) technique is used to make the highly porous structure such as nanocolumns (NCs) of various metal oxides for enhancing the gas-sensing performance. To measure the fire detection, the interface circuitry for our sensors (NiO, SnO2, WO3 and In2O3 NCs) is designed. When all the sensors with various metal-oxide NCs are exposed to fire environment, they entirely react with the target gases emitted from Poly(vinyl chlorides) (PVC) decomposed at high temperature. Before the emission of smoke from the PVC (a hot-plate temperature of 200 °C), the resistances of the metal-oxide NCs are abruptly changed and SnO2 NCs show the highest response of 2.1. However, a commercial smoke detector did not inform any warning. Interestingly, although the NiO NCs are a p-type semiconductor, they show the highest response of 577.1 after the emission of smoke from the PVC (a hot-plate temperature of 350 °C). The response time of SnO2 NCs is much faster than that of a commercial smoke detector at the hot-plate temperature of 350 °C. In addition, we investigated the selectivity of our sensors by analyzing the responses of all sensors. Our results show the high potential of a gas sensor based on metal-oxide NCs for early fire detection. [ABSTRACT FROM AUTHOR]

This paper proposes a low-complexity Mobile Display Digital Interface (MDDI) architecture. We implement and verify the proposed MDDI-host architecture on a System- on-Chip (SoC) platform with a 32-bit RISC CPU and a FPGA module. As a result of verification, the gate count of the MDDI host is reduced by about 50 % compared to that of the conventional parallel interface. And the bandwidth per pin of the MDDI host is 3 times more than that of a conventional parallel interface. Furthermore, the MDDI host that we implement includes the Advanced High-performance Bus (AHB) interface. Therefore, the proposed MDDI architecture is suitable for SoC platforms. [ABSTRACT FROM AUTHOR]

We present a surveillance camera architecture using a one-bit motion detection algorithm for portable applications. The conventional surveillance system requires too many components and is too complicated for portable applications. In this paper, we propose a simple surveillance camera architecture with a motion detector that can detect changes of an object within its surroundings for low-power and low-cost applications. The proposed motion-detection algorithm uses one-bit images which are selected using a binary search algorithm that is decided by varying the reference voltage. We verify all the functions of the motion detector through the use of a user interface program on an FPGA board. Experimental results are also presented. [ABSTRACT FROM AUTHOR]